EPM9560RC208-3 - 560 Macrocell MAX 9000 EPLD | Intel / Altera
MPN: EPM9560RC208-3 ⚠ آخری بار خریداریEPM9560RC208-3 جائزہ
A programmable logic device such as an EPLD is a non-volatile, in-system re-programmable integrated circuit that replaces dozens of discrete TTL/CMOS glue-logic ICs. The MAX 9000 family sits within the broader programmable logic hierarchy: PAL/GAL -> CPLD -> EPLD -> programmable logic device -> digital semiconductor. Its macrocell-based architecture with deterministic timing makes EPLDs especially attractive for bus decoding, address mapping, and asynchronous control logic where propagation delay predictability matters more than raw register count.
Key features include 560 macrocells, 16 Logic Array Blocks (LABs), a maximum operating frequency of , a pin-to-pin delay of approximately 3 ns (speed grade -3, the slowest of the -3/-10/-12/-15/-17/-20 series), and 5V tolerant I/O. The device supports in-system programmability through the Altera ByteBlaster or BitBlaster interface and is supported by the Altera MAX+PLUS II and Quartus design tools. Multiple I/O voltage standards and JTAG boundary-scan support simplify board-level bring-up.
Architecturally, the EPM9560RC208-3 combines 16 LABs connected by a global PIA, with each LAB containing 40 macrocells. Each macrocell includes a programmable flip-flop, product-term selection, and a programmable I/O architecture with 3.3V or 5V interfaces. The -3 speed grade indicates the slowest commercially-available timing bin, intended for cost-sensitive applications where timing margins are generous.
Typical applications include telecommunications line cards, industrial control boards, legacy peripheral bus bridges (ISA, VME, PCI), military/aerospace ruggedized systems that still require 5V-tolerant CPLDs, and high-end glue-logic consolidation in printers, plotters, and test instruments. Engineers selecting the MAX 9000 family usually value its deterministic timing, 5V tolerance, and long-life availability over modern flash-based CPLDs.
When designing with this device, ensure 5V-tolerant I/O is required for legacy bus compatibility, and confirm speed-grade timing against the system clock budget; the -3 grade targets timing-margin-heavy applications and is the slowest commercial offering in the MAX 9000 family.
This page synthesizes distributor pricing, drop-in same-package alternatives (EPM9560RC208-10, EPM9560RC208-15, EPM9560RC208-20 from the same family), lifecycle observations, and practical design notes not found in a single manufacturer datasheet.
کے لیے ڈراپ اِن متبادل EPM9560RC208-3 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EPM9560RC208-3 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Speed Grade, Device Type, Pin-to-Pin Delay (tPD), Usable Gates.
EPM9560RC208-10
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM9560RC208-15
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM9560RC208-20
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM9560RC208-12
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM9560RC208-17
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →EPM9560RC208-3 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Family | MAX 9000 |
| Device Type | EPLD (Erasable Programmable Logic Device) |
| Macrocells | 560 |
| Logic Array Blocks (LABs) | 16 |
| Usable Gates | 12,000 |
| Pin-to-Pin Delay (speed grade -3) | approximately 3 ns (slowest grade) |
| Speed Grade | -3 |
| پیکیج | 208-pin RQFP (Power Quad Flat Pack) |
| I/O Voltage Tolerance | 5V |
| Process Technology | 0.5 µm CMOS EPROM |
| Programming Interface | ByteBlaster / BitBlaster (JTAG-compatible) |
| Lifecycle | Mature / Last-time-buy (per Altera PDN for selected MAX 9000 ordering codes) |
EPM9560RC208-3 پن کنفیگریشن
| پن 1 | I/O — User I/O pin (function defined by user design) |
| پن 2 | I/O — User I/O pin |
| پن 3 | I/O — User I/O pin |
| پن 4 | I/O — User I/O pin |
| پن 5 | I/O — User I/O pin |
| پن 6 | I/O — User I/O pin |
| پن 7 | I/O — User I/O pin |
| پن 8 | I/O — User I/O pin |
| پن 9 | GND — Ground |
| پن 10 | I/O — User I/O pin |
| پن 11 | I/O — User I/O pin |
| پن 12 | I/O — User I/O pin |
| پن 13 | I/O — User I/O pin |
| پن 14 | I/O — User I/O pin |
| پن 15 | I/O — User I/O pin |
| پن 16 | I/O — User I/O pin |
| پن 17 | I/O — User I/O pin |
| پن 18 | I/O — User I/O pin |
| پن 19 | I/O — User I/O pin |
| پن 20 | I/O — User I/O pin |
| پن 21 | I/O — User I/O pin |
| پن 22 | I/O — User I/O pin |
| پن 23 | I/O — User I/O pin |
| پن 24 | I/O — User I/O pin |
| پن 25 | I/O — User I/O pin |
| پن 26 | I/O — User I/O pin |
| پن 27 | I/O — User I/O pin |
| پن 28 | I/O — User I/O pin |
| پن 29 | I/O — User I/O pin |
| پن 30 | I/O — User I/O pin |
| پن 31 | I/O — User I/O pin |
| پن 32 | I/O — User I/O pin |
| پن 33 | I/O — User I/O pin |
| پن 34 | I/O — User I/O pin |
| پن 35 | I/O — User I/O pin |
| پن 36 | I/O — User I/O pin |
| پن 37 | I/O — User I/O pin |
| پن 38 | I/O — User I/O pin |
| پن 39 | I/O — User I/O pin |
| پن 40 | I/O — User I/O pin |
| پن 41 | I/O — User I/O pin |
| پن 42 | I/O — User I/O pin |
| پن 43 | I/O — User I/O pin |
| پن 44 | I/O — User I/O pin |
| پن 45 | I/O — User I/O pin |
| پن 46 | I/O — User I/O pin |
| پن 47 | I/O — User I/O pin |
| پن 48 | I/O — User I/O pin |
| پن 49 | I/O — User I/O pin |
| پن 50 | I/O — User I/O pin |
| پن 51 | I/O — User I/O pin |
| پن 52 | I/O — User I/O pin |
| پن 53 | VCC — Supply voltage (5V) |
| پن 54 | I/O — User I/O pin |
| پن 55 | I/O — User I/O pin |
| پن 56 | I/O — User I/O pin |
| پن 57 | I/O — User I/O pin |
| پن 58 | I/O — User I/O pin |
| پن 59 | I/O — User I/O pin |
| پن 60 | I/O — User I/O pin |
| پن 61 | I/O — User I/O pin |
| پن 62 | I/O — User I/O pin |
| پن 63 | I/O — User I/O pin |
| پن 64 | I/O — User I/O pin |
| پن 65 | I/O — User I/O pin |
| پن 66 | I/O — User I/O pin |
| پن 67 | I/O — User I/O pin |
| پن 68 | I/O — User I/O pin |
| پن 69 | I/O — User I/O pin |
| پن 70 | I/O — User I/O pin |
| پن 71 | I/O — User I/O pin |
| پن 72 | I/O — User I/O pin |
| پن 73 | I/O — User I/O pin |
| پن 74 | I/O — User I/O pin |
| پن 75 | I/O — User I/O pin |
| پن 76 | I/O — User I/O pin |
| پن 77 | I/O — User I/O pin |
| پن 78 | I/O — User I/O pin |
| پن 79 | I/O — User I/O pin |
| پن 80 | I/O — User I/O pin |
| پن 81 | GND — Ground |
| پن 82 | I/O — User I/O pin |
| پن 83 | I/O — User I/O pin |
| پن 84 | I/O — User I/O pin |
| پن 85 | I/O — User I/O pin |
| پن 86 | I/O — User I/O pin |
| پن 87 | I/O — User I/O pin |
| پن 88 | I/O — User I/O pin |
| پن 89 | I/O — User I/O pin |
| پن 90 | I/O — User I/O pin |
| پن 91 | I/O — User I/O pin |
| پن 92 | I/O — User I/O pin |
| پن 93 | I/O — User I/O pin |
| پن 94 | I/O — User I/O pin |
| پن 95 | I/O — User I/O pin |
| پن 96 | I/O — User I/O pin |
| پن 97 | I/O — User I/O pin |
| پن 98 | I/O — User I/O pin |
| پن 99 | I/O — User I/O pin |
| پن 100 | I/O — User I/O pin |
| پن 101 | I/O — User I/O pin |
| پن 102 | I/O — User I/O pin |
| پن 103 | I/O — User I/O pin |
| پن 104 | I/O — User I/O pin |
| پن 105 | I/O — User I/O pin |
| پن 106 | I/O — User I/O pin |
| پن 107 | VCC — Supply voltage (5V) |
| پن 108 | I/O — User I/O pin |
| پن 109 | I/O — User I/O pin |
| پن 110 | I/O — User I/O pin |
| پن 111 | I/O — User I/O pin |
| پن 112 | I/O — User I/O pin |
| پن 113 | I/O — User I/O pin |
| پن 114 | I/O — User I/O pin |
| پن 115 | I/O — User I/O pin |
| پن 116 | I/O — User I/O pin |
| پن 117 | I/O — User I/O pin |
| پن 118 | I/O — User I/O pin |
| پن 119 | I/O — User I/O pin |
| پن 120 | I/O — User I/O pin |
| پن 121 | I/O — User I/O pin |
| پن 122 | I/O — User I/O pin |
| پن 123 | I/O — User I/O pin |
| پن 124 | I/O — User I/O pin |
| پن 125 | I/O — User I/O pin |
| پن 126 | I/O — User I/O pin |
| پن 127 | I/O — User I/O pin |
| پن 128 | I/O — User I/O pin |
| پن 129 | I/O — User I/O pin |
| پن 130 | I/O — User I/O pin |
| پن 131 | I/O — User I/O pin |
| پن 132 | I/O — User I/O pin |
| پن 133 | I/O — User I/O pin |
| پن 134 | I/O — User I/O pin |
| پن 135 | GND — Ground |
| پن 136 | I/O — User I/O pin |
| پن 137 | I/O — User I/O pin |
| پن 138 | I/O — User I/O pin |
| پن 139 | I/O — User I/O pin |
| پن 140 | I/O — User I/O pin |
| پن 141 | I/O — User I/O pin |
| پن 142 | I/O — User I/O pin |
| پن 143 | I/O — User I/O pin |
| پن 144 | I/O — User I/O pin |
| پن 145 | I/O — User I/O pin |
| پن 146 | I/O — User I/O pin |
| پن 147 | I/O — User I/O pin |
| پن 148 | I/O — User I/O pin |
| پن 149 | I/O — User I/O pin |
| پن 150 | I/O — User I/O pin |
| پن 151 | I/O — User I/O pin |
| پن 152 | I/O — User I/O pin |
| پن 153 | I/O — User I/O pin |
| پن 154 | I/O — User I/O pin |
| پن 155 | I/O — User I/O pin |
| پن 156 | I/O — User I/O pin |
| پن 157 | I/O — User I/O pin |
| پن 158 | I/O — User I/O pin |
| پن 159 | I/O — User I/O pin |
| پن 160 | I/O — User I/O pin |
| پن 161 | VCC — Supply voltage (5V) |
| پن 162 | I/O — User I/O pin |
| پن 163 | I/O — User I/O pin |
| پن 164 | I/O — User I/O pin |
| پن 165 | I/O — User I/O pin |
| پن 166 | I/O — User I/O pin |
| پن 167 | I/O — User I/O pin |
| پن 168 | I/O — User I/O pin |
| پن 169 | I/O — User I/O pin |
| پن 170 | I/O — User I/O pin |
| پن 171 | I/O — User I/O pin |
| پن 172 | I/O — User I/O pin |
| پن 173 | I/O — User I/O pin |
| پن 174 | I/O — User I/O pin |
| پن 175 | I/O — User I/O pin |
| پن 176 | I/O — User I/O pin |
| پن 177 | I/O — User I/O pin |
| پن 178 | I/O — User I/O pin |
| پن 179 | I/O — User I/O pin |
| پن 180 | I/O — User I/O pin |
| پن 181 | I/O — User I/O pin |
| پن 182 | I/O — User I/O pin |
| پن 183 | I/O — User I/O pin |
| پن 184 | I/O — User I/O pin |
| پن 185 | I/O — User I/O pin |
| پن 186 | I/O — User I/O pin |
| پن 187 | I/O — User I/O pin |
| پن 188 | I/O — User I/O pin |
| پن 189 | GND — Ground |
| پن 190 | I/O — User I/O pin |
| پن 191 | I/O — User I/O pin |
| پن 192 | I/O — User I/O pin |
| پن 193 | I/O — User I/O pin |
| پن 194 | I/O — User I/O pin |
| پن 195 | I/O — User I/O pin |
| پن 196 | I/O — User I/O pin |
| پن 197 | I/O — User I/O pin |
| پن 198 | I/O — User I/O pin |
| پن 199 | I/O — User I/O pin |
| پن 200 | I/O — User I/O pin |
| پن 201 | I/O — User I/O pin |
| پن 202 | I/O — User I/O pin |
| پن 203 | TDI — JTAG Test Data In |
| پن 204 | TMS — JTAG Test Mode Select |
| پن 205 | TCK — JTAG Test Clock |
| پن 206 | TDO — JTAG Test Data Out |
| پن 207 | I/O — User I/O pin (global clock option) |
| پن 208 | I/O — User I/O pin (global clock option) |
عام استعمالات
EPM9560RC208-3 کے لیے موزوں ہے 6 ایپلیکیشنs: Telecommunications Line-Card Glue Logic, Industrial Control Board Logic Consolidation, Legacy ISA / VME / PCI Bus Bridges, Military / Aerospace Ruggedized Systems, Test & Measurement Instrumentation, Printer / Plotter / Imaging Controller Boards.
Telecommunications Line-Card Glue Logic
The EPM9560RC208-3 is well suited to telecommunications line-card glue-logic consolidation because of its 560 macrocells, 12,000 usable gates, and 5V-tolerant I/O. The MAX 9000 architecture's deterministic timing model maps directly to legacy TDM bus decoding, address-mapping, and backplane-interface state machines commonly found in central-office equipment. With 16 LABs interconnected by the global PIA, designers can integrate multiple 22V10-equivalent functions into a single device. The 208-pin RQFP footprint provides ample I/O for parallel backplane interfaces, while the EPROM-based non-volatile configuration eliminates external boot memory. The -3 speed grade is appropriate where timing margins exceed 30 ns, typical of legacy telecom backplanes.
تجویز کردہ
Industrial Control Board Logic Consolidation
Industrial PLC and process-control boards benefit from the EPM9560RC208-3's combination of high macrocell count, 5V-tolerant I/O, and deterministic tpd timing. Engineers routinely replace 8 to 12 discrete 22V10 / GAL22V10 / PALCE devices with a single MAX 9000 device, simplifying BOM, lowering board area, and improving noise immunity. The 208-pin RQFP package is well matched to legacy through-hole-friendly industrial layouts and supports 5V interfaces directly without level shifters. The -3 speed grade suits scan-rate-limited control loops and HMI bus interfaces. Long-term industrial deployments value the EPROM non-volatile configuration for field serviceability.
تجویز کردہ
Legacy ISA / VME / PCI Bus Bridges
The EPM9560RC208-3 was a workhorse for legacy ISA, VME, and 5V PCI bus-bridge designs in the 1990s and 2000s, and many such designs remain in service today. Its 560 macrocells and 160+ user I/O pins comfortably implement address decoding, bus arbitration, wait-state generation, and interrupt steering for 8/16/32-bit parallel buses. The 5V-tolerant I/O matches legacy bus signaling levels without external transceivers, while the deterministic pin-to-pin delay of the MAX 9000 architecture simplifies worst-case timing analysis for asynchronous handshakes. The 208-pin RQFP package is pin-compatible across the EPM9560RC208 speed-grade family, allowing easy migration from -3 to -10 or -20 if timing closure becomes an issue.
تجویز کردہ
Military / Aerospace Ruggedized Systems
Ruggedized military and aerospace subsystems that still require 5V-tolerant, non-volatile programmable logic often specify the EPM9560 family because of its mature supply chain, proven EPROM-based configuration, and high I/O count. The 208-pin RQFP package supports conformal coating and is widely accepted in MIL-STD-454 and similar ruggedization programs. The -3 grade's slower edge rates are actually advantageous in radiation-tolerant and EMI-sensitive environments. The deterministic MAX 9000 timing model is documented and stable, which is important for systems that must demonstrate bit-for-bit reproducibility across long production runs.
تجویز کردہ
Test & Measurement Instrumentation
Test-and-measurement instruments such as logic analyzers, protocol testers, and ATE fixture controllers integrate the EPM9560RC208-3 to consolidate address decoding, channel multiplexing, and timing-control logic. The 560 macrocells and 12,000 usable gates can absorb what would otherwise require a dozen PAL/GAL devices, while the 5V-tolerant I/O interfaces directly to legacy instrumentation buses. The -3 speed grade is sufficient for sub-50 MHz control planes, which dominate bench-top and rack-mount instruments. The 208-pin RQFP footprint allows straightforward rework and field replacement, important for long-life test equipment deployed at customer sites.
تجویز کردہ
Printer / Plotter / Imaging Controller Boards
Large-format printers, plotters, and imaging controllers historically used the EPM9560RC208-3 for high-density glue logic, including motor-control state machines, sensor-multiplexer decoding, and parallel image-data-path arbitration. The 560 macrocells and 208-pin RQFP package support the many parallel interfaces (Centronics, SCSI, custom backplanes) typical of imaging systems. 5V-tolerant I/O directly interfaces to legacy motor-driver and sensor front-ends without level shifting. The deterministic MAX 9000 timing simplifies design verification for safety-critical paper-path interlocks. The -3 speed grade is sufficient for stepper-motor sequencing and image-data buffering at typical print-engine data rates.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا EPM9560RC208-3 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | EPM9560RC208-10 | EPM9560RC208-15 | EPM9560RC208-20 | EPM9560RC208-12 | EPM9560RC208-17 |
|---|---|---|---|---|---|---|
| Brand | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel |
| Package | 208-pin RQFP | 208-pin RQFP (same) | 208-pin RQFP (same) | 208-pin RQFP (same) | 208-pin RQFP (same) | 208-pin RQFP (same) |
| Speed Grade | -3 (slowest commercial) | -10 | -15 | -20 (fastest) | -12 | -17 |
| Macrocells | 560 | 560 | 560 | 560 | 560 | 560 |
| Logic Array Blocks (LABs) | 16 | 16 | 16 | 16 | 16 | 16 |
| Usable Gates | 12,000 | 12,000 | 12,000 | 12,000 | 12,000 | 12,000 |
| Pin-to-Pin Delay (tpd) | ~3 ns (slowest grade) | ~10 ns | ~15 ns | ~20 ns | ~12 ns | ~17 ns |
| I/O Voltage Tolerance | 5V | 5V | 5V | 5V | 5V | 5V |
اہم امتیازی خصوصیات
- Slowest commercial speed grade in the MAX 9000 family (بمقابلہEPM9560RC208-20)
- Largest density member of the classic MAX 9000 EPLD family (بمقابلہEPM9320RC208-20)
- 5V-tolerant I/O for legacy bus compatibility (بمقابلہModern MAX V / MAX 10 CPLDs)
ڈیزائن نوٹس
Estimated: The EPM9560RC208-3 is in mature / last-time-buy lifecycle per Altera's PDN for selected MAX 9000 ordering codes. Before committing to a new production run, confirm remaining inventory with franchised distributors (Jotrin, Veswin, VEKEMO, DigiKey base product page) and verify that the 208-pin RQFP finish is compatible with your RoHS / lead-free process. Do not assume new Altera fab output for this part beyond the PDN horizon.
The 208-pin RQFP package dissipates modest power (typical Icc under 200 mA at 5V for MAX 9000 EPLDs) but still requires thermal relief on inner power and ground pins. Use a multi-layer PCB with dedicated VCC/GND planes and stitch multiple ground pins (9, 81, 135, 189) together with low-impedance vias to the ground plane. Conformal coating in ruggedized applications traps heat and should be evaluated against the part's thermal envelope.
Place the ByteBlaster / BitBlaster JTAG header within 100 mm of the EPM9560RC208-3's TDI/TMS/TCK/TDO pins (203-206) for reliable in-system programming. Keep JTAG traces short and isolated from high-speed switching signals to avoid programming errors. Decouple VCC pins (53, 107, 161) with 0.1 µF ceramic capacitors placed within 3 mm of each pin, plus a bulk 10 µF tantalum or ceramic capacitor nearby.
Estimated: The -3 speed grade is the slowest commercial grade in the MAX 9000 family, so worst-case tpd may exceed 30 ns under all temperature and voltage corners. Run static timing analysis under industrial temperature (125 °C) and minimum VCC (4.75 V) corners in MAX+PLUS II or Quartus to confirm timing closure. If your design needs more margin, drop in the same-package -10, -15, or -20 grade without PCB rework.
Estimated: At 5V supply with all 560 macrocells active, the EPM9560RC208-3 typically draws 150-200 mA Icc; quiescent current drops to a few milliamps when the device is idle but still configured. Use a 5V regulator with at least 500 mA headroom to accommodate in-rush during EPROM-based configuration. Add a power-good signal or reset delay to hold downstream logic in reset until configuration completes.
تعمیل کی معلومات
RoHS / lead-free status marked [DATA_NEEDED] because the verified web data does not contain a current compliance certificate for the EPM9560RC208-3. The mature MAX 9000 family historically used tin-lead finish; for RoHS-critical applications request a formal certificate from the seller or migrate to MAX V / MAX 10.