Altera

EPM9560RI208-15N - MAX 9000 EPLD, 208-Pin RQFP, 15ns | Altera

MPN: EPM9560RI208-15N ✗ اختتامِ زندگی

5.0 V Vdss 208-pin RQFP (Ruggedized Quad Flat Pack) Package 145 MHz Speed CMOS EEPROM, in-system programmable Memory

قیمت کی درخواست کریں

MOQ: 1 |

ڈیٹا شیٹ دیکھیں (PDF) متبادل دیکھیں

مقدار

EPM9560RI208-15N جائزہ

The Altera EPM9560RI208-15N is a high-performance CMOS EEPROM-based programmable logic device from the MAX 9000 family, built on third-generation Multiple Array MatriX (MAX) architecture. Delivered in a 208-pin RQFP (Ruggedized Quad Flat Pack) package with 5.0-V in-system programmability, the device integrates 216 user I/Os, 356 pins, and a maximum internal frequency of 145 MHz with a propagation delay of 11.4 ns at the -15 speed grade.

An EPLD (Erasable Programmable Logic Device) is a non-volatile programmable logic device that combines the architectural density of a PLD with on-chip EEPROM configuration memory. In the broader component hierarchy, an EPLD sits between a traditional SPLD/CPLD and an FPGA, providing deterministic timing, instant-on operation, and high pin counts for glue-logic and bus-interface functions. The MAX 9000 architecture extends the classic MAX macrocell with a Logic Array Block (LAB) structure and a Programmable Interconnect Array (PIA), enabling up to 12,000 usable gates for system-level integration.

Key features of the EPM9560RI208-15N include 216 user I/Os, 356 total pins, 5.0-V in-system programmability via IEEE 1149.1 JTAG, an industrial operating temperature grade, and propagation delay of 11.4 ns (15 ns speed grade). The EEPROM-based configuration cell provides 100+ reprogram cycles and 10+ years of data retention, eliminating the need for external boot memory and enabling instant-on logic implementation.

The MAX 9000 architecture routes every LAB output through a global PIA, providing fast, predictable interconnect delays that simplify timing closure compared with SRAM-based FPGAs. This makes the EPM9560RI208-15N well suited for high-pin-count bus interfacing, address decoding, and state-machine consolidation in designs where deterministic timing is required.

Typical applications include 32-bit/64-bit microprocessor glue logic, peripheral bus interfacing (PCI, ISA, VME), high-density state-machine controllers, and industrial control systems. The 208-pin RQFP footprint is also used in legacy telecom and military subsystems where through-hole or ruggedized packages are preferred over fine-pitch BGAs.

When designing with this device, confirm that the Altera MAX+PLUS II or Quartus (legacy MAX 9000 support) toolchain supports the latest customer-targeted revisions, and budget adequate in-system programming time during manufacturing test. The -15N speed grade offers a balance between propagation delay and power consumption for cost-sensitive industrial designs.

This page synthesizes distributor pricing, drop-in speed-grade and package alternatives, and practical design notes not aggregated in a single location in the original Altera datasheet.

کے لیے ڈراپ اِن متبادل EPM9560RI208-15N — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EPM9560RI208-15N (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Operating Temperature, Architecture, In-System Programmability, Usable Gates.

EPM9320RI208-20N

Altera

Package: 208-pin PQFP (Plastic Quad Flat Pack)

In-System Programmability: Yes, 5.0 V ISP via JTAG