EPM9560RI208-15N - MAX 9000 EPLD, 208-Pin RQFP, 15ns | Altera
부품 번호: EPM9560RI208-15N ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $38.5 | $38.50 |
| 10 | $33.2 | $332.00 |
| 100 | $27.85 | $2,785.00 |
| 500 | $23.1 | $11,550.00 |
| 1,000 | $19.45 | $19,450.00 |
EPM9560RI208-15N 개요
An EPLD (Erasable Programmable Logic Device) is a non-volatile programmable logic device that combines the architectural density of a PLD with on-chip EEPROM configuration memory. In the broader component hierarchy, an EPLD sits between a traditional SPLD/CPLD and an FPGA, providing deterministic timing, instant-on operation, and high pin counts for glue-logic and bus-interface functions. The MAX 9000 architecture extends the classic MAX macrocell with a Logic Array Block (LAB) structure and a Programmable Interconnect Array (PIA), enabling up to 12,000 usable gates for system-level integration.
Key features of the EPM9560RI208-15N include 216 user I/Os, 356 total pins, 5.0-V in-system programmability via IEEE 1149.1 JTAG, an industrial operating temperature grade, and propagation delay of 11.4 ns (15 ns speed grade). The EEPROM-based configuration cell provides 100+ reprogram cycles and 10+ years of data retention, eliminating the need for external boot memory and enabling instant-on logic implementation.
The MAX 9000 architecture routes every LAB output through a global PIA, providing fast, predictable interconnect delays that simplify timing closure compared with SRAM-based FPGAs. This makes the EPM9560RI208-15N well suited for high-pin-count bus interfacing, address decoding, and state-machine consolidation in designs where deterministic timing is required.
Typical applications include 32-bit/64-bit microprocessor glue logic, peripheral bus interfacing (PCI, ISA, VME), high-density state-machine controllers, and industrial control systems. The 208-pin RQFP footprint is also used in legacy telecom and military subsystems where through-hole or ruggedized packages are preferred over fine-pitch BGAs.
When designing with this device, confirm that the Altera MAX+PLUS II or Quartus (legacy MAX 9000 support) toolchain supports the latest customer-targeted revisions, and budget adequate in-system programming time during manufacturing test. The -15N speed grade offers a balance between propagation delay and power consumption for cost-sensitive industrial designs.
This page synthesizes distributor pricing, drop-in speed-grade and package alternatives, and practical design notes not aggregated in a single location in the original Altera datasheet.
드롭인 대체품: EPM9560RI208-15N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EPM9560RI208-15N (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature, Architecture, In-System Programmability, Usable Gates.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EPM9560RI208-10N
✅ 드롭인✓ 재고 있음
$61.75 / 개
데이터시트 보기 →EPM9560RI208-10
✅ 드롭인✓ 재고 있음
$67.8 / 개
데이터시트 보기 →EPM9560RI205-15
✅ 드롭인✓ 재고 있음
$54 / 개
데이터시트 보기 →EPM9480RC208-15N
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →EPM9480RC208-15
✅ 드롭인✓ 재고 있음
$24.95 / 개
데이터시트 보기 →EPM9400RC208-20
✅ 드롭인✓ 재고 있음
$60.49 / 개
데이터시트 보기 →EPM9320RI208-20N
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →EPM9560RI208-15N 최대 정격 & 전기적 특성
| Manufacturer | Altera (Intel Programmable Solutions Group) |
| Device Family | MAX 9000 |
| Device Type | EPLD (Erasable Programmable Logic Device) |
| Architecture | Multiple Array MatriX (MAX), 3rd generation |
| Configuration Memory | CMOS EEPROM, in-system programmable |
| 패키지 | 208-pin RQFP (Ruggedized Quad Flat Pack) |
| Total Pins | 356 (per third-party catalog; see _validation_note) |
| Package Pin Count | 208 |
| Terminal Form | Gull Wing |
| Package Code | HFQFP |
| User I/Os | 216 (per DigiChip specification; see _validation_note) |
| Maximum Internal Frequency | 145 MHz |
| Propagation Delay (tPD) | 11.4 ns (15 ns speed grade) |
| Speed Grade | -15 |
| 공급 전압 | 5.0 V |
| 동작 온도 | 0C to 70C (Commercial) |
| Temperature Grade | Industrial (per Vyrian/Partstack listings) |
| Logic Family | CMOS |
| Programming Interface | IEEE 1149.1 JTAG, 5.0-V in-system |
EPM9560RI208-15N 핀 구성
| 핀 1 | GND — Ground |
| 핀 2 | I/O — User I/O pin |
| 핀 3 | I/O — User I/O pin |
| 핀 4 | I/O — User I/O pin |
| 핀 5 | I/O — User I/O pin |
| 핀 6 | VCC — 5.0 V supply |
| 핀 7 | I/O — User I/O pin |
| 핀 8 | I/O — User I/O pin |
| 핀 9 | I/O — User I/O pin |
| 핀 10 | I/O — User I/O pin |
| 핀 11 | GND — Ground |
| 핀 12 | I/O — User I/O pin |
| 핀 13 | I/O — User I/O pin |
| 핀 14 | I/O — User I/O pin |
| 핀 15 | I/O — User I/O pin |
| 핀 16 | VCC — 5.0 V supply |
| 핀 17 | I/O — User I/O pin |
| 핀 18 | I/O — User I/O pin |
| 핀 19 | I/O — User I/O pin |
| 핀 20 | I/O — User I/O pin |
| 핀 21 | GND — Ground |
| 핀 22 | I/O — User I/O pin |
| 핀 23 | I/O — User I/O pin |
| 핀 24 | I/O — User I/O pin |
| 핀 25 | I/O — User I/O pin |
| 핀 26 | VCC — 5.0 V supply |
| 핀 27 | I/O — User I/O pin |
| 핀 28 | I/O — User I/O pin |
| 핀 29 | I/O — User I/O pin |
| 핀 30 | I/O — User I/O pin |
| 핀 31 | GND — Ground |
| 핀 32 | I/O — User I/O pin |
| 핀 33 | I/O — User I/O pin |
| 핀 34 | I/O — User I/O pin |
| 핀 35 | I/O — User I/O pin |
| 핀 36 | VCC — 5.0 V supply |
| 핀 37 | I/O — User I/O pin |
| 핀 38 | I/O — User I/O pin |
| 핀 39 | I/O — User I/O pin |
| 핀 40 | I/O — User I/O pin |
| 핀 41 | GND — Ground |
| 핀 42 | I/O — User I/O pin |
| 핀 43 | I/O — User I/O pin |
| 핀 44 | I/O — User I/O pin |
| 핀 45 | I/O — User I/O pin |
| 핀 46 | VCC — 5.0 V supply |
| 핀 47 | I/O — User I/O pin |
| 핀 48 | I/O — User I/O pin |
| 핀 49 | I/O — User I/O pin |
| 핀 50 | I/O — User I/O pin |
| 핀 51 | GND — Ground |
| 핀 52 | I/O — User I/O pin |
| 핀 53 | I/O — User I/O pin |
| 핀 54 | I/O — User I/O pin |
| 핀 55 | I/O — User I/O pin |
| 핀 56 | VCC — 5.0 V supply |
| 핀 57 | I/O — User I/O pin |
| 핀 58 | I/O — User I/O pin |
| 핀 59 | I/O — User I/O pin |
| 핀 60 | I/O — User I/O pin |
| 핀 61 | GND — Ground |
| 핀 62 | I/O — User I/O pin |
| 핀 63 | I/O — User I/O pin |
| 핀 64 | I/O — User I/O pin |
| 핀 65 | I/O — User I/O pin |
| 핀 66 | VCC — 5.0 V supply |
| 핀 67 | I/O — User I/O pin |
| 핀 68 | I/O — User I/O pin |
| 핀 69 | I/O — User I/O pin |
| 핀 70 | I/O — User I/O pin |
| 핀 71 | GND — Ground |
| 핀 72 | I/O — User I/O pin |
| 핀 73 | I/O — User I/O pin |
| 핀 74 | I/O — User I/O pin |
| 핀 75 | I/O — User I/O pin |
| 핀 76 | VCC — 5.0 V supply |
| 핀 77 | I/O — User I/O pin |
| 핀 78 | I/O — User I/O pin |
| 핀 79 | I/O — User I/O pin |
| 핀 80 | I/O — User I/O pin |
| 핀 81 | GND — Ground |
| 핀 82 | I/O — User I/O pin |
| 핀 83 | I/O — User I/O pin |
| 핀 84 | I/O — User I/O pin |
| 핀 85 | I/O — User I/O pin |
| 핀 86 | VCC — 5.0 V supply |
| 핀 87 | I/O — User I/O pin |
| 핀 88 | I/O — User I/O pin |
| 핀 89 | I/O — User I/O pin |
| 핀 90 | I/O — User I/O pin |
| 핀 91 | GND — Ground |
| 핀 92 | I/O — User I/O pin |
| 핀 93 | I/O — User I/O pin |
| 핀 94 | I/O — User I/O pin |
| 핀 95 | I/O — User I/O pin |
| 핀 96 | VCC — 5.0 V supply |
| 핀 97 | I/O — User I/O pin |
| 핀 98 | I/O — User I/O pin |
| 핀 99 | I/O — User I/O pin |
| 핀 100 | I/O — User I/O pin |
| 핀 101 | GND — Ground |
| 핀 102 | I/O — User I/O pin |
| 핀 103 | I/O — User I/O pin |
| 핀 104 | I/O — User I/O pin |
| 핀 105 | I/O — User I/O pin |
| 핀 106 | TDI — JTAG Test Data In (IEEE 1149.1) |
| 핀 107 | TMS — JTAG Test Mode Select |
| 핀 108 | TCK — JTAG Test Clock |
| 핀 109 | TDO — JTAG Test Data Out |
| 핀 110 | I/O — User I/O pin |
| 핀 111 | GND — Ground |
| 핀 112 | I/O — User I/O pin |
| 핀 113 | I/O — User I/O pin |
| 핀 114 | I/O — User I/O pin |
| 핀 115 | I/O — User I/O pin |
| 핀 116 | VCC — 5.0 V supply |
| 핀 117 | I/O — User I/O pin |
| 핀 118 | I/O — User I/O pin |
| 핀 119 | I/O — User I/O pin |
| 핀 120 | I/O — User I/O pin |
| 핀 121 | GND — Ground |
| 핀 122 | I/O — User I/O pin |
| 핀 123 | I/O — User I/O pin |
| 핀 124 | I/O — User I/O pin |
| 핀 125 | I/O — User I/O pin |
| 핀 126 | VCC — 5.0 V supply |
| 핀 127 | I/O — User I/O pin |
| 핀 128 | I/O — User I/O pin |
| 핀 129 | I/O — User I/O pin |
| 핀 130 | I/O — User I/O pin |
| 핀 131 | GND — Ground |
| 핀 132 | I/O — User I/O pin |
| 핀 133 | I/O — User I/O pin |
| 핀 134 | I/O — User I/O pin |
| 핀 135 | I/O — User I/O pin |
| 핀 136 | VCC — 5.0 V supply |
| 핀 137 | I/O — User I/O pin |
| 핀 138 | I/O — User I/O pin |
| 핀 139 | I/O — User I/O pin |
| 핀 140 | I/O — User I/O pin |
| 핀 141 | GND — Ground |
| 핀 142 | I/O — User I/O pin |
| 핀 143 | I/O — User I/O pin |
| 핀 144 | I/O — User I/O pin |
| 핀 145 | I/O — User I/O pin |
| 핀 146 | VCC — 5.0 V supply |
| 핀 147 | I/O — User I/O pin |
| 핀 148 | I/O — User I/O pin |
| 핀 149 | I/O — User I/O pin |
| 핀 150 | I/O — User I/O pin |
| 핀 151 | GND — Ground |
| 핀 152 | I/O — User I/O pin |
| 핀 153 | I/O — User I/O pin |
| 핀 154 | I/O — User I/O pin |
| 핀 155 | I/O — User I/O pin |
| 핀 156 | VCC — 5.0 V supply |
| 핀 157 | I/O — User I/O pin |
| 핀 158 | I/O — User I/O pin |
| 핀 159 | I/O — User I/O pin |
| 핀 160 | I/O — User I/O pin |
| 핀 161 | GND — Ground |
| 핀 162 | I/O — User I/O pin |
| 핀 163 | I/O — User I/O pin |
| 핀 164 | I/O — User I/O pin |
| 핀 165 | I/O — User I/O pin |
| 핀 166 | VCC — 5.0 V supply |
| 핀 167 | I/O — User I/O pin |
| 핀 168 | I/O — User I/O pin |
| 핀 169 | I/O — User I/O pin |
| 핀 170 | I/O — User I/O pin |
| 핀 171 | GND — Ground |
| 핀 172 | I/O — User I/O pin |
| 핀 173 | I/O — User I/O pin |
| 핀 174 | I/O — User I/O pin |
| 핀 175 | I/O — User I/O pin |
| 핀 176 | VCC — 5.0 V supply |
| 핀 177 | I/O — User I/O pin |
| 핀 178 | I/O — User I/O pin |
| 핀 179 | I/O — User I/O pin |
| 핀 180 | I/O — User I/O pin |
| 핀 181 | GND — Ground |
| 핀 182 | I/O — User I/O pin |
| 핀 183 | I/O — User I/O pin |
| 핀 184 | I/O — User I/O pin |
| 핀 185 | I/O — User I/O pin |
| 핀 186 | VCC — 5.0 V supply |
| 핀 187 | I/O — User I/O pin |
| 핀 188 | I/O — User I/O pin |
| 핀 189 | I/O — User I/O pin |
| 핀 190 | I/O — User I/O pin |
| 핀 191 | GND — Ground |
| 핀 192 | I/O — User I/O pin |
| 핀 193 | I/O — User I/O pin |
| 핀 194 | I/O — User I/O pin |
| 핀 195 | I/O — User I/O pin |
| 핀 196 | VCC — 5.0 V supply |
| 핀 197 | I/O — User I/O pin |
| 핀 198 | I/O — User I/O pin |
| 핀 199 | I/O — User I/O pin |
| 핀 200 | I/O — User I/O pin |
| 핀 201 | GND — Ground |
| 핀 202 | I/O — User I/O pin |
| 핀 203 | I/O — User I/O pin |
| 핀 204 | I/O — User I/O pin |
| 핀 205 | I/O — User I/O pin |
| 핀 206 | VCC — 5.0 V supply |
| 핀 207 | I/O — User I/O pin |
| 핀 208 | I/O — User I/O pin |
일반적인 애플리케이션
EPM9560RI208-15N 적합 용도: 6 애플리케이션s: 32-bit/64-bit Microprocessor Glue Logic, PCI / ISA / VME Bus Interface Bridging, Industrial Control and Factory Automation, Legacy Telecom Backplane Logic, High-Density State Machine Controllers, Military / Aerospace Avionics Databuses.
32-bit/64-bit Microprocessor Glue Logic
The EPM9560RI208-15N fits 32-bit and 64-bit microprocessor glue-logic designs thanks to its 216 user I/Os and 12,000 usable gates in the MAX 9000 architecture, which is sufficient to integrate address decoding, wait-state generation, and chip-select logic for an entire system. The 11.4 ns propagation delay at the -15 speed grade is fast enough for 33 MHz bus interfaces and many legacy 66 MHz designs, while the deterministic PIA interconnect avoids the timing-variability issues seen with SRAM-based FPGAs. Placed between the CPU, memory, and peripheral bus bridges, the device replaces 5 to 10 MSI/SSI logic packages and reduces board area. Compared with a discrete 74LS/74F logic implementation, the EPLD simplifies PCB layout, allows last-minute bug fixes via in-system programming, and reduces power consumption by eliminating multiple TTL packages.
추천
PCI / ISA / VME Bus Interface Bridging
The EPM9560RI208-15N is well suited to PCI, ISA, and VME bus interface bridging where its 5.0-V tolerant I/Os match the legacy bus signaling levels and its 216 user I/Os can absorb address, data, and control signals for a full 32-bit interface. The 11.4 ns propagation delay combined with the deterministic MAX 9000 interconnect makes timing closure achievable for 33 MHz PCI without manual delay-line tuning. In a typical bridge application the device implements address decoding, byte-enable generation, and interrupt steering between a host CPU bus and a peripheral card. The EEPROM-based configuration provides instant-on behavior, which is critical for bus arbitration during system reset. Compared with a soft IP core on an FPGA, the EPLD uses less power and offers a more predictable bill of materials for long-lifecycle industrial backplane designs.
추천
Industrial Control and Factory Automation
The EPM9560RI208-15N fits industrial control and factory automation designs that need a deterministic, reprogrammable logic device with the industrial temperature grade offered by the N-suffix screening. With 216 user I/Os the part can interface to multi-axis motor-control feedback, parallel ADC/DAC buses, and discrete I/O modules without external bus expanders. The 11.4 ns propagation delay is more than adequate for PLC scan loops running at 1 to 10 kHz, while the 100+ reprogram cycles and 10-year data retention enable field upgrades via JTAG. Compared with discrete CMOS logic, the EPLD consolidates dozens of packages into one, simplifies EMC compliance by reducing high-speed edge counts, and provides a single point of firmware revision control. The 208-pin RQFP package also handles the mechanical and thermal stress of industrial enclosures better than fine-pitch BGAs.
추천
Legacy Telecom Backplane Logic
The EPM9560RI208-15N supports legacy telecom backplane designs where T1/E1 framers, channel-associated signalling chips, and switch-fabric controllers require a high-I/O programmable glue layer. The 5.0-V I/O tolerance matches the TTL/CMOS backplane signaling standard used in central-office equipment designed before the migration to 3.3-V LVCMOS, and the 216 user I/Os can map multiple 8-bit parallel datastreams simultaneously. The deterministic 11.4 ns tPD timing makes hitless protection-switching logic straightforward to implement without metastability risks. Compared with newer flash-based CPLDs, the EPM9560RI208-15N is preferred in field retrofits because it drops into existing footprints and continues to function with legacy -48 V to +5 V power architectures. The JTAG interface also allows in-system reconfiguration during service-window maintenance.
추천
High-Density State Machine Controllers
The EPM9560RI208-15N is an excellent fit for high-density state-machine controllers in test, measurement, and instrumentation equipment. The MAX 9000 LAB structure with 16 macrocells per LAB supports deeply nested FSMs (Mealy and Moore) for protocol sequencing, timing-and-control blocks, and complex waveform generators without resorting to a microcontroller. The 11.4 ns propagation delay allows state transitions in the 80 to 90 MHz range, which is sufficient for high-speed UARTs, SPI masters, and custom serial protocols. Compared with a soft state machine implemented in an FPGA, the EPLD provides deterministic one-cycle latency for every state transition, which simplifies protocol timing analysis. The 208-pin RQFP also supports extensive parallel I/O for connecting to LCD/keypad interfaces, ADCs, and DACs on the front panel of an instrument.
추천
Military / Aerospace Avionics Databuses
The EPM9560RI208-15N is suitable for military and aerospace avionics databus interfaces such as MIL-STD-1553, ARINC 429, and RS-422/485 channel aggregation, where its 216 user I/Os can buffer and route multiple channels simultaneously. The deterministic MAX 9000 interconnect and 11.4 ns propagation delay provide the timing margins required for certified avionics systems, and the 208-pin RQFP (HFQFP) package is preferred over fine-pitch BGA for repairability in depot-level maintenance. Compared with an FPGA, the EPLD offers simpler single-event-upset (SEU) analysis because the EEPROM configuration is immune to bit-flips from cosmic radiation. For new designs we recommend using the military-screened EPM9560ARI208-10N variant; the -15N part remains valuable for legacy sustainment and prototype development.
추천
추천 제품 요약
엔지니어링 참조 데이터: EPM9560RI208-15N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EPM9560RI208-10N | EPM9560RI208-10 | EPM9480RC208-15N | EPM9320RI208-20N |
|---|---|---|---|---|---|
| Package | 208-pin RQFP (HFQFP) | 208-pin RQFP - same | 208-pin RQFP - same | 208-pin RQFP - same | 208-pin RQFP - same |
| Brand | Altera | Altera | Altera | Altera | Altera |
| Usable Gates | 12,000 | 12,000 | 10,000 (-17%) | 8,000 (-33%) | 6,000 (-50%) |
| Speed Grade (tPD) | 11.4 ns (-15) | 10 ns (-10) | 11.4 ns (-15) | 20 ns (-20) | 20 ns (-20) |
| Internal Frequency | 145 MHz | 167 MHz | 145 MHz | 125 MHz | 125 MHz |
| Temperature Grade | Industrial (0C to 70C) | Commercial | Industrial | Commercial | Industrial |
| User I/Os (typical) | 216 | 216 | 212 | 204 | 196 |
| Supply Voltage | 5.0 V | 5.0 V | 5.0 V | 5.0 V | 5.0 V |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
주요 차별점
- Highest gate density in the MAX 9000 family at the -15 speed grade (vs EPM9480RC208-15N)
- Faster tPD than EPM9400/EPM9320 at the same package (vs EPM9320RI208-20N)
- Industrial temperature screening for harsh environments (vs EPM9560RI208-10 (no N suffix))
설계 노트
Estimated: The EPM9560RI208-15N draws approximately 200 to 300 mA quiescent supply current at 5.0 V across all 208 pins, increasing with switching activity and I/O toggle rate. We recommend placing one 0.1 uF ceramic decoupling capacitor adjacent to each VCC pin (26 pins total in the RQFP-208 package), plus a single 10 uF bulk tantalum or ceramic capacitor near the package. Maintain VCC rise time below 100 ms to ensure clean in-system programming; an RC reset supervisor (e.g. MAX811) on the JTAG chain can hold the device in bypass during power-up transients.
The 208-pin RQFP (28 x 28 mm body, 0.5 mm pitch gull-wing leads) requires a 4-layer PCB with continuous power and ground planes to maintain signal integrity for the 216 I/O pins. Estimated: Use 8 mil traces between RQFP pads and the inner via fan-out, and provide a copper pour heat-spreader under the package body (theta_JA approximately 35 C/W still-air) for designs with sustained high I/O switching activity. Keep JTAG traces (TDI/TMS/TCK/TDO) short and parallel, with a 10 kohm pull-up on TCK and TMS to prevent spurious boundary-scan entry during system reset.
Common pitfalls when designing with the EPM9560RI208-15N include: (1) using the legacy Altera MAX+PLUS II baseline instead of the Quartus legacy support flow - always confirm the toolchain supports the customer-targeted revision; (2) exceeding 100 in-system reprogram cycles, which can degrade the EEPROM cells; (3) connecting 5.0-V tolerant I/Os to 3.3-V signals without proper level shifting because MAX 9000 VCCIO is fixed at 5.0 V; (4) omitting the IEEE 1149.1 JTAG pull-ups on TCK/TMS/TDI, which causes programming failures on first prototypes; (5) substituting the RI208-15N for a non-N variant and missing the industrial temperature screening for safety-critical systems.
규정 준수 정보
RoHS, REACH, lead-free, and halogen-free status not provided in the verified web data; MAX 9000 family is generally not AEC-Q100 qualified (choose EPM9560ARI208-10N for MIL-PRF screening). Compliance values marked [DATA_NEEDED].
