MW7IC2040GNR1 vs MW7IC2040NR1 So sánh
So sánh chi tiết song song của MW7IC2040GNR1 bằng NXP Semiconductors và MW7IC2040NR1 bằng NXP Semiconductors. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
NXP Semiconductors
MW7IC2040NR1 - 4W RF LDMOS Wideband PA | NXP | Cellular BTS
MW7IC2040NR1 ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | MW7IC2040GNR1 | MW7IC2040NR1 |
|---|---|---|
| Thương hiệu | NXP Semiconductors | NXP Semiconductors |
| Danh mục | RF Amplifiers | RF Amplifiers |
| Trạng thái vòng đời | Obsolete | Hoạt động |
| Manufacturer | NXP Semiconductors (formerly Freescale/Motorola) | NXP Semiconductors (formerly Freescale / Motorola Semiconductor) |
| Part Family | MW7IC2040 (NR1 / GNR1 / NBR1) | — |
| Device Type | RF LDMOS Wideband Integrated Power Amplifier | — |
| Frequency Range | 1805 MHz to 1990 MHz | — |
| Output Power (CW) | 4 W typical | — |
| Power Supply Voltage | 24 V to 32 V (28 V nominal) | — |
| Điện áp yên tĩnh | 75 mA (typical, per web data) | — |
| Small-Signal Gain | 23.5 dB (typical at 1.99 GHz, per web data) | 23.5 dB |
| RF Type | General Purpose / Cellular Base Station PA | General Purpose / Wideband Integrated Power Amplifier |
| Modulation Support | W-CDMA, GSM/EDGE, multi-carrier cellular | — |
| On-Chip Matching | Yes (input/output 50 ohm) | — |
| Number of Stages | 2 (multi-stage integrated) | — |
| Technology | LDMOS (Laterally Diffused MOS) | RF LDMOS (Laterally Diffused MOSFET) |
| Hộp / Vỏ | TO-270-16 Variant, Gull Wing (TO-270 WBL-16) | TO-270 WBL-16 (TO-270-16 Variant, Flat Leads), plastic over-mold surface-mount |
| Package Body Material | Plastic / Epoxy overmold | — |
| Kiểu lắp đặt | Surface Mount (Gull Wing leads) | Surface Mount (PCB solderable with bottom drain ground plane) |
| Packaging | Tape & Reel | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | — |
| ESD Protection | Yes (integrated) | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | Compliant (per NXP product family) |
| Lead-Free | [DATA_NEEDED: lead-free status] | — |
| Đông trùng haogen | Not Compliant (per GlobalSpec listing) | — |
| Chức năng | — | Two-stage integrated power amplifier with on-chip matching |
| Frequency Range (Application) | — | 1805 MHz to 1990 MHz (covers 1805-1880 MHz DCS/PCS and 1930-1990 MHz UMTS) |
| Frequency Range (Characterization) | — | 100 MHz to 1 GHz |
| Supply Voltage (Vdd) | — | 24 V to 32 V (nominal 28 V) |
| Maximum Supply Voltage | — | 32 V |
| Quiescent Supply Current (Idq) | — | 75 mA |
| Output Power (avg, W-CDMA) | — | 4 W (typical at rated operating conditions) |
| Modulation Compatibility | — | Single W-CDMA, GSM/EDGE, UMTS, LTE, all typical cellular BTS formats |
| Số chân | — | 16 |
| Operating Mode | — | Class-AB (multi-stage, externally biased) |
| Lead Configuration | — | Flat leads (surface-mount) |
| Nhiệt độ hoạt động | — | -40 C to +85 C (industrial base-station operating ambient; per Freescale/NXP LDMOS module family) |
| Packaging Type | — | Tape & Reel (per part suffix NR1 suffix convention) |