10AS057H2F34I2SG - Arria 10 SX SoC FPGA, 570K LE, Dual A9 | Intel
MPN: 10AS057H2F34I2SG ✓ Hoạt động10AS057H2F34I2SG Tóm tắt
An SoC FPGA is a heterogeneous computing device that combines general-purpose application processor cores with programmable fabric on a single die, enabling designers to partition workloads between hardware acceleration in the FPGA and software execution on the ARM cores for the lowest possible latency and power. The Arria 10 SX family targets mid-range applications that require both deterministic hardware processing and a rich software stack.
Key specifications for the 10AS057H2F34I2SG include 570K logic elements, dual ARM Cortex-A9 cores with CoreSight, on-chip processor subsystems with peripherals, high-speed transceivers up to 1.5 GHz effective data rate, hardened memory controllers, and the 0.9 V core voltage typical of the 20 nm Arria 10 generation. The industrial temperature grade and -2 speed bin indicate balance between performance and timing margin for non-extended use cases.
Architecturally, the device combines a hard processor system (HPS) with hardened peripherals such as Ethernet MAC, USB, SD/MMC, NAND flash controllers, and DDR memory controllers, all connected to the FPGA fabric via high-bandwidth bridges. The 20 nm process enables higher logic density and lower dynamic power than the previous 28 nm Arria V generation, while maintaining transceivers and DSP blocks suited to wireless infrastructure and video processing.
Typical applications include wireless baseband processing, software-defined radio, radar signal processing, video broadcasting equipment, industrial machine vision, and secure communications. The Arria 10 SX is also widely used in test and measurement and medical imaging systems requiring simultaneous ARM-based control and FPGA-based data plane.
When designing with this device, pay close attention to PCB layout for the FCBGA-1152 package, including microvia stack-up, signal-integrity simulation for 1.5 GHz transceivers, and proper decoupling. Quartus Prime is the primary tool chain; configuration via JTAG, AS, or fast passive parallel modes is supported.
This page synthesizes distributor pricing, same-family Altera Arria 10 SX drop-in alternatives, and design context not present in the standalone datasheet, helping engineers quickly compare and source the part.
Bộ thay thế dễ dàng lắp đặt cho 10AS057H2F34I2SG — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với 10AS057H2F34I2SG (cùng hình factor và footprint) — khác nhau ở Package, Speed Grade, Logic Elements, Mounting Type, Process Technology.
10AS057H2F34I2LG
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →10AS057H2F34I1HG
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →10AS057H2F34E2SG
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →10AS057H2F34E2LG
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →10AS057H2F34E1HG
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →10AS057H1F34I1HG
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →10AS057H1F34E1HG
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →10AS057H2F34I2SG Tỷ lệ tối đa & tính chất điện
| Family | Arria 10 SX SoC FPGA |
| Logic Elements | 570000 |
| Process Technology | 20 nm |
| Core Voltage | 0.9 V |
| Hard Processor System | Dual ARM Cortex-A9 MPCore with CoreSight |
| Maximum User I/O | 492 |
| Hộp | 1152-ball FCBGA (F34) |
| Package Dimensions | 35 x 35 mm |
| Kiểu lắp đặt | Surface Mount (Flip-Chip BGA) |
| Operating Temperature Grade | Industrial (-40C to +100C) |
| Speed Grade | -2 (mid-range) |
| Transceiver Data Rate | Up to 1.5 Gbps (effective) |
| Configuration | JTAG, AS, FPP |
| Trạng thái RoHS | Compliant |
| Part Number Decoder - I2 | Industrial temperature grade |
| Part Number Decoder - SG | Lead-free, RoHS compliant, Pb-free F34 package |
Hướng dẫn cấu hình chân 10AS057H2F34I2SG 35 x 35 mm
Cấu hình chân cho 10AS057H2F34I2SG (35 x 35 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho 10AS057H2F34I2SG.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
10AS057H2F34I2SG phù hợp cho 6 Áp dụngs: Wireless Baseband Processing, Software-Defined Radio, Video Broadcasting Infrastructure, Industrial Machine Vision Systems, Radar Signal Processing, Test and Measurement Instrumentation.
Wireless Baseband Processing
The 10AS057H2F34I2SG suits wireless baseband applications thanks to its 570K logic elements for high-throughput DSP pipelines, integrated 1.5 Gbps transceivers for CPRI/OBSAI fronthaul links, and dual ARM Cortex-A9 cores that run the MAC and upper layers while the FPGA fabric accelerates PHY and FEC. The Arria 10 SX SoC architecture reduces latency by eliminating chip-to-chip HPS-to-FPGA bridge interfaces, which is critical for LTE and 5G NR sub-6 GHz radio units.
Được đề xuất
Software-Defined Radio
The dual ARM Cortex-A9 MPCore in the 10AS057H2F34I2SG runs real-time control stacks, scheduling, and waveform management while the 570K LE fabric executes parallel demodulation, channelization, and digital up/down conversion. Transceivers operating up to 1.5 Gbps aggregate support multi-band RF sampling for tactical and commercial SDR platforms. Quartus Prime DSP Builder and SoC EDS provide a complete development path.
Được đề xuất
Video Broadcasting Infrastructure
The 570K logic elements of the 10AS057H2F34I2SG provide the resources needed for multi-stream HEVC/AVC encode and decode, video processing pipelines (deinterlacing, scaling, color conversion), and overlay graphics at 4K/60p and beyond. The hard ARM cores manage IP/UDP/SRT/RTP protocol stacks for contribution encoders and decoders, while FCBGA-1152 with 492 I/O supports simultaneous SDI, HDMI, and 10G Ethernet I/O.
Được đề xuất
Industrial Machine Vision Systems
The 10AS057H2F34I2SG combines high-throughput FPGA logic for image preprocessing and machine-learning inference with an ARM Cortex-A9 dual-core for system control, network connectivity, and HMI rendering. Industrial temperature grading (-40C to +100C) suits factory-floor deployment. Multiple MIPI or LVDS channels aggregated over 492 I/O interfaces with CoaXPress, GigE Vision, or USB3 Vision cameras.
Được đề xuất
Radar Signal Processing
The 570K LE fabric of the 10AS057H2F34I2SG handles FFT, beamforming, and pulse compression for phased-array radar, while 1.5 Gbps transceivers digitize ADC outputs and feed back digital control. The hard ARM cores run the tracker and display rendering. Industrial temperature and high pin count make it well-suited to airborne, ground-based, and maritime radar systems where deterministic latency matters.
Được đề xuất
Test and Measurement Instrumentation
The 10AS057H2F34I2SG enables high-end test equipment by combining FPGA-speed data acquisition with ARM-driven display and remote control logic. The 570K LE fabric executes parallel DSP for real-time spectral analysis, protocol decoding, and arbitrary waveform generation, while 1.5 Gbps transceivers feed data from high-speed ADCs/DACs. SoC integration reduces board complexity in oscilloscopes, logic analyzers, and signal analyzers.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho 10AS057H2F34I2SG — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | 10AS057H2F34I2LG | 10AS057H2F34I1HG | 10AS057H2F34E2SG | 10AS057H2F34E2LG |
|---|---|---|---|---|---|
| Package | 1152-ball FCBGA (F34), 35x35 mm | 1152-ball FCBGA (F34), 35x35 mm - same | 1152-ball FCBGA (F34), 35x35 mm - same | 1152-ball FCBGA (F34), 35x35 mm - same | 1152-ball FCBGA (F34), 35x35 mm - same |
| Brand | Intel (Altera) | Intel (Altera) - same | Intel (Altera) - same | Intel (Altera) - same | Intel (Altera) - same |
| Logic Elements | 570000 | 570000 | 570000 | 570000 | 570000 |
| Speed Grade | -2 | -2 | -1 (faster) | -2 | -2 |
| Temperature Grade | Industrial (-40C to +100C) | Industrial | Industrial | Extended | Extended |
| Lead-free Suffix | SG | LG | HG | SG | LG |
| User I/O | 492 | 492 | 492 | 492 | 492 |
| HPS Revision | H2 | H2 | H2 | H2 | H2 |
Bảo phân biệt quan trọng
- Highest user I/O among the 570K-LE Arria 10 SX F34 family (vs10AS057K1F35E1SG)
- Industrial temperature grade with -2 speed balance (vs10AS057H2F34E2SG)
- Dual-core ARM Cortex-A9 hard processor system integrated (vs10AS048H2F34I2SG)
Ghi chú thiết kế
The 1152-ball FCBGA at 35x35 mm has a typical theta_JA in the range of 0.4-1.0 C/W with proper thermal design (chip-scale BGA with thermal lid and adequate PCB copper). For industrial temperature operation up to +100C ambient, plan for at least 8-10 W continuous dissipation without airflow. Use the manufacturer's thermal model and follow the package lid-down mounting recommendations in the Arria 10 device datasheet.
Design a high-density PCB stack-up (typically 12-16 layers) with microvia arrays under the BGA for breakout. Pair each high-speed transceiver differential pair with continuous reference ground planes and follow the Arria 10 pin connection guidelines for length matching. Use the Intel/Altera Pin Connection Guidelines document to identify any pins that require specific termination or pull-up resistors.
Verify the HPS (hard processor system) pin multiplex mapping for SD/MMC, USB, EMAC, and NAND before PCB layout - the HPS peripheral I/O assignment differs across Arria 10 SX SKUs. Also confirm Quartus Prime version supports the silicon revision on the part. Configuring SoC FPGA via AS mode requires a compatible EPCQ flash device; consult the Arria 10 Configuration Handbook for supported densities and voltage rails.
Thông tin tuân thủ
Lead-free F34 FCBGA package; SG suffix indicates lead-free and RoHS compliance per Altera/Intel convention. Not AEC-Q100 qualified - choose automotive-grade Arria 10 devices for that requirement.
