EP20K600CF1020C8 - APEX 20KC 600K Gate FPGA, 1020-BGA | Altera
MPN: EP20K600CF1020C8 ✗ Cuối đờiEP20K600CF1020C8 Tóm tắt
What is an APEX 20KC FPGA? The APEX 20KC family belongs to the broader category of programmable logic devices (PLDs), which sit hierarchically under FPGAs (Field-Programmable Gate Arrays) and CPLDs (Complex Programmable Logic Devices). APEX 20KC extends the original APEX 20K architecture by embedding dedicated True-Look-Up-Table memory blocks called ESBs (Embedded System Blocks), enabling single-chip implementation of logic, on-chip memory, and specialty functions such as CAMs and FIFOs. It occupies a specific position in the historical Altera roadmap between APEX 20K (logic-only) and the later Stratix family.
Key features include MultiVolt I/O support for 1.8 V, 2.5 V, and 3.3 V interfaces, hot-socketing capability, JTAG IEEE 1149.1 boundary-scan testing, and a 4-wire serial configuration interface. The PLLs provide flexible clock management, while the ESBs can be configured as dual-port RAM up to 311 Kbit, ROM, or CAM. The device also supports DDR SDRAM and ZBT SRAM external memory interfaces through dedicated I/O circuitry.
Typical applications include telecommunications line cards, PCI bridge designs, high-speed digital signal processing, custom microcontroller implementation, and ASIC prototyping. Industrial designers frequently use the EP20K600CF1020C8 in 3.3 V backplane designs where its 588 I/Os replace multiple discrete glue-logic devices.
When designing with this part, ensure the PCB accommodates the 1.00 mm BGA pitch and that the multi-voltage I/O banks are powered correctly. Quiescent supply current rises significantly with logic utilization, so thermal dissipation analysis is recommended at >70 % utilization.
Bộ thay thế dễ dàng lắp đặt cho EP20K600CF1020C8 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EP20K600CF1020C8 (cùng hình factor và footprint) — khác nhau ở Package, Speed Grade, Process Technology, Operating Temperature, RoHS Status.
EP20K600CF1020C7
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP20K600CB652C8
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP20K600CB652C8N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP20K600CB672C8
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP20K600CB672C7
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP20K600CF1020C8 Tỷ lệ tối đa & tính chất điện
| Family | APEX 20KC |
| Series | EP20K600 |
| Logic Elements / Cells | 24,320 |
| System Gates | 600,000 |
| Embedded Memory (ESB) | 311 Kbit (max) |
| Process Technology | 0.15 µm CMOS |
| Core Supply Voltage | 1.8 V |
| I/O Supply Voltage | 1.8 V / 2.5 V / 3.3 V (MultiVolt) |
| Maximum Internal Frequency | 301.21 MHz (C8 speed grade) |
| User I/O Pins | 588 |
| Dedicated Inputs | 4 |
| Hộp | 1020-ball FC-FBGA (1.00 mm pitch) |
| Nhiệt độ hoạt động | 0 °C to +85 °C (commercial, "C") |
| Speed Grade | C8 |
| Configuration Interface | Serial / JTAG (IEEE 1149.1) |
| PCI Compliance | PCI SIG Local Bus Spec Rev 2.2, 32/64-bit, 33/66 MHz, 3.3 V |
Hướng dẫn cấu hình chân EP20K600CF1020C8 1020-ball fc-fbga (1.00 mm pitch)
Cấu hình chân cho EP20K600CF1020C8 (1020-ball fc-fbga (1.00 mm pitch) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho EP20K600CF1020C8.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
EP20K600CF1020C8 phù hợp cho 6 Áp dụngs: Telecommunications Line Card, ASIC Prototyping Platform, PCI Bus Bridge, Industrial Automation Controller, High-Speed Digital Signal Processing, Custom Microcontroller / Soft-Core CPU.
Telecommunications Line Card
The EP20K600CF1020C8's 588 user I/Os and PCI 2.2 compliance make it well-suited for telecom line cards aggregating T1/E1 or ATM traffic. Its 311 Kbit embedded memory implements per-channel FIFOs without external SRAM, while the 301 MHz internal frequency supports 66 MHz PCI 64-bit system bus bridging with comfortable timing margin.
Được đề xuất
ASIC Prototyping Platform
With 24,320 logic elements and 600 K system gates, the EP20K600CF1020C8 emulates ASICs up to ~500 K gates before partitioning. Its ESBs map cleanly to ASIC SRAM/CAM blocks, and MultiVolt I/O (1.8/2.5/3.3 V) connects directly to legacy ASIC pin voltages, shortening prototype-to-silicon bring-up cycles.
Được đề xuất
PCI Bus Bridge
The EP20K600CF1020C8 is PCI SIG 2.2 compliant for both 32-bit and 64-bit, 33 MHz and 66 MHz operation at 3.3 V. Designers use it as a PCI-to-PCI bridge or custom peripheral controller, leveraging the 588 I/Os to expose multiple PCI segments plus local processor and memory buses on one device.
Được đề xuất
Industrial Automation Controller
Industrial motion-control and PLC platforms benefit from the EP20K600CF1020C8's 588 I/Os, which directly drive hundreds of opto-isolated digital channels. The 1.8 V core plus 3.3 V I/O simplifies interfacing to legacy 5 V-tolerant logic via external buffers, while the 0 °C to +85 °C commercial temperature range suits factory-floor enclosures.
Được đề xuất
High-Speed Digital Signal Processing
The 301 MHz internal frequency of the EP20K600CF1020C8 enables multi-channel FIR filtering and FFT datapaths at sample rates above 100 MSPS. ESBs configured as dual-port RAM store tap coefficients, while the 588 I/Os stream data to external DDR SDRAM or ZBT SRAM at sustained throughput without bus contention.
Được đề xuất
Custom Microcontroller / Soft-Core CPU
The 600 K system gates comfortably host 32-bit soft processors such as Nios, ARM7TDMI, or OpenRISC alongside peripherals. Designers implement UARTs, timers, DMA, and external bus controllers in the EP20K600CF1020C8's logic fabric, using ESBs as register files and cache, while exposing 588 I/Os as GPIO and bus pins.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EP20K600CF1020C8 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EP20K600CF1020C7 | EP20K600CB652C8 | EP20K600CB652C8N | EP20K600CB672C8 | EP20K600CB672C7 |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 1020-ball FC-FBGA (1.00 mm pitch) | 1020-ball FC-FBGA (1.00 mm pitch) - same | 652-ball FBGA - smaller | 652-ball FBGA - smaller | 672-ball FBGA - smaller | 672-ball FBGA - smaller |
| Speed Grade | C8 (~301 MHz) | C7 (~260 MHz) | C8 (~301 MHz) | C8 (~301 MHz) | C8 (~301 MHz) | C7 (~260 MHz) |
| User I/O Pins | 588 | 588 | 380 | 380 | 408 | 408 |
| System Gates | 600 K | 600 K | 600 K | 600 K | 600 K | 600 K |
| Logic Elements | 24,320 | 24,320 | 24,320 | 24,320 | 24,320 | 24,320 |
| Embedded Memory (ESB) | 311 Kbit | 311 Kbit | 311 Kbit | 311 Kbit | 311 Kbit | 311 Kbit |
| Core Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Operating Temperature | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C |
Bảo phân biệt quan trọng
- Largest I/O count in the APEX 20KC family (vsEP20K600CB652C8)
- Highest speed grade available in this footprint (vsEP20K600CF1020C7)
- Largest embedded memory budget at full I/O (vsEP20K600CB672C8)
Ghi chú thiết kế
The 1020-ball FC-FBGA package uses a 1.00 mm ball pitch. PCB layout requires HDI microvia stack-ups with 0.4 mm via pitch escape routing, plus a continuous ground plane beneath the BGA for return-current integrity. Recommended microvia aspect ratio is 1:1 or smaller for reliable assembly yield.
Core current scales with toggle rate and logic utilisation. At >70 % utilisation the EP20K600CF1020C8 typically draws 1.5-2.5 A on the 1.8 V VCCINT rail, so use a low-dropout regulator with at least 3 A headroom and decouple each VCCINT ball pair with 0.1 µF plus 10 µF bulk ceramic capacitors placed within 5 mm of the package.
The FC-FBGA package relies on PCB thermal conduction rather than a heatsink. At 2 A × 1.8 V ≈ 3.6 W dissipation, ensure the top and inner copper layers connected to GND provide at least 25 cm² of continuous pour. Without this, junction temperature may exceed the 125 °C limit and trigger thermal-shutdown-induced bit corruption during long configuration cycles.
MultiVolt I/O banks must each be powered even if unused, or the unpowered bank draws leakage that prevents configuration. Program all bank VCCIO pins before JTAG configuration. Also, MSEL pins must be tied to the correct logic level to select the configuration mode (Fast Passive Parallel, etc.).
Thông tin tuân thủ
RoHS status, lead-free finish, and halogen-free status were not confirmed by the verified web data; manufacturer datasheet predates many of these disclosures. Cross-reference the device marking or contact Altera/Intel for an authoritative certificate of conformance before consumer-market deployment.
