EPM9560RI205-15 - MAX 9000 CPLD, 6K Gates, 15ns | Altera
MPN: EPM9560RI205-15 ✗ Cuối đờiEPM9560RI205-15 Tóm tắt
A CPLD (Complex Programmable Logic Device) is a non-volatile, instant-on semiconductor that combines the integration density of an FPGA with the deterministic timing and low power of a traditional SPLD. In the broader taxonomy, a CPLD is a programmable logic device, which is itself a category of digital ICs sitting between discrete logic gates and full FPGAs. CPLDs are typically used for glue logic, I/O expansion, bus bridging, and power-up state control where instant-on and predictable timing matter more than raw LUT density.
Key features of the EPM9560RI205-15 include 5.0-V in-system programmability (ISP) through the built-in IEEE Std. 1149.1 JTAG interface, 212 macrocells distributed across LABs, and dedicated I/O pins with programmable drive strength and slew-rate control. The device supports global clock networks, clear/preset controls, and per-macrocell D/T/JK flip-flop configuration, enabling complex state-machine implementation. The 15 ns speed grade places it in the medium-speed tier of the MAX 9000 family.
Architecturally, the MAX 9000 employs a continuous, segmented interconnect matrix that links every LAB to every other LAB with uniform propagation delay. The EEPROM configuration cell gives the part true non-volatility with zero-configuration time at power-up, an advantage over SRAM-based FPGAs that require external boot PROMs. Per-pin JTAG boundary-scan and a built-in IEEE 1149.1 controller simplify board-level testing and field upgrades via the standard JTAG pins (TCK, TMS, TDI, TDO).
Typical applications include bus interface bridges (e.g., 8-bit to 32-bit address/data steering), peripheral glue logic for microprocessors and DSPs, power-up state machines, address decoding in embedded systems, and industrial control logic where instant-on and 5-V tolerance are required. The wide I/O count of the 205-pin RQFP package makes the part particularly suitable for hub and aggregation designs.
When designing with the EPM9560RI205-15, observe the 5.0-V VCCIO tolerance and provide adequate decoupling - at least 0.1 uF ceramic on every VCC/ground pair within 100 mils of the package pin. Use the JTAG chain to retain ISP capability even after PCB assembly.
This page synthesizes distributor pricing, drop-in MAX 9000 alternatives in the same RQFP-205 footprint, and practical design notes that complement the official Altera datasheet.
Bộ thay thế dễ dàng lắp đặt cho EPM9560RI205-15 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EPM9560RI205-15 (cùng hình factor và footprint) — khác nhau ở Package, Operating Temperature, Propagation Delay (tPD), Architecture, Configuration Memory.
EPM9560RI205-20
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
EPM9560RI205-10
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
EPM95108RI208-15
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
EPM95108RC208-15
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
EPM9480RC208-15
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EPM9320RI208-20
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EPM9560RI205-15 Tỷ lệ tối đa & tính chất điện
| Family | MAX 9000 |
| Device | EPM9560 |
| Logic Capacity | 6,000 usable gates |
| Macrocells | 212 |
| Logic Array Blocks (LABs) | 20 |
| Maximum User I/O Pins | 164 |
| Speed Grade | -15 (15 ns pin-to-pin delay) |
| Propagation Delay (tpd) | 15 ns |
| Hộp | RQFP-205 (PowerQuad4) |
| Supply Voltage (VCC) | 5.0 V |
| Technology | CMOS EEPROM |
| In-System Programmability | Yes (IEEE 1149.1 JTAG) |
| Nhiệt độ hoạt động | -40 C to +85 C (industrial) |
| Kiểu lắp đặt | Surface Mount |
Cấu hình chân EPM9560RI205-15
| Chân 1 | I/O — User I/O pin (LAB row 0) |
| Chân 2 | I/O — User I/O pin |
| Chân 3 | I/O — User I/O pin |
| Chân 4 | I/O — User I/O pin |
| Chân 5 | I/O — User I/O pin |
| Chân 6 | I/O — User I/O pin |
| Chân 7 | VCC — +5.0 V supply |
| Chân 8 | GND — Ground |
| Chân 9 | I/O — User I/O pin |
| Chân 10 | I/O — User I/O pin |
| Chân 11 | I/O — User I/O pin |
| Chân 12 | I/O — User I/O pin |
| Chân 13 | I/O — User I/O pin |
| Chân 14 | TDI — JTAG Test Data In |
| Chân 15 | TMS — JTAG Test Mode Select |
| Chân 16 | TCK — JTAG Test Clock |
| Chân 17 | TDO — JTAG Test Data Out |
| Chân 18 | GLOBAL_CLK1 — Dedicated global clock input 1 |
| Chân 19 | GLOBAL_CLK2 — Dedicated global clock input 2 |
| Chân 20 | GLOBAL_CLR — Global clear |
| Chân 21 | OE1 — Output enable bank 1 |
| Chân 22 | OE2 — Output enable bank 2 |
| Chân 23 | I/O — User I/O pin (continues around package) |
| Chân 24 | I/O — User I/O pin |
| Chân 25 | I/O — User I/O pin |
| Chân 26 | I/O — User I/O pin |
| Chân 27 | VCC — +5.0 V supply |
| Chân 28 | GND — Ground |
| Chân 29 | I/O — User I/O pin |
| Chân 30 | I/O — User I/O pin |
| Chân 31 | I/O — User I/O pin |
| Chân 32 | I/O — User I/O pin |
| Chân 33 | I/O — User I/O pin |
| Chân 34 | I/O — User I/O pin |
| Chân 35 | I/O — User I/O pin |
| Chân 36 | I/O — User I/O pin |
| Chân 37 | I/O — User I/O pin |
| Chân 38 | I/O — User I/O pin |
| Chân 39 | I/O — User I/O pin |
| Chân 40 | I/O — User I/O pin |
| Chân 41 | VCC — +5.0 V supply |
| Chân 42 | GND — Ground |
| Chân 43 | I/O — User I/O pin |
| Chân 44 | I/O — User I/O pin |
| Chân 45 | I/O — User I/O pin |
| Chân 46 | I/O — User I/O pin |
| Chân 47 | I/O — User I/O pin |
| Chân 48 | I/O — User I/O pin |
| Chân 49 | I/O — User I/O pin |
| Chân 50 | I/O — User I/O pin |
| Chân 51 | I/O — User I/O pin |
| Chân 52 | I/O — User I/O pin |
| Chân 53 | I/O — User I/O pin |
| Chân 54 | I/O — User I/O pin |
| Chân 55 | I/O — User I/O pin |
| Chân 56 | VCC — +5.0 V supply |
| Chân 57 | GND — Ground |
| Chân 58 | I/O — User I/O pin |
| Chân 59 | I/O — User I/O pin |
| Chân 60 | I/O — User I/O pin |
| Chân 61 | I/O — User I/O pin |
| Chân 62 | I/O — User I/O pin |
| Chân 63 | I/O — User I/O pin |
| Chân 64 | I/O — User I/O pin |
| Chân 65 | I/O — User I/O pin |
| Chân 66 | I/O — User I/O pin |
| Chân 67 | I/O — User I/O pin |
| Chân 68 | I/O — User I/O pin |
| Chân 69 | I/O — User I/O pin |
| Chân 70 | I/O — User I/O pin |
| Chân 71 | VCC — +5.0 V supply |
| Chân 72 | GND — Ground |
| Chân 73 | I/O — User I/O pin |
| Chân 74 | I/O — User I/O pin |
| Chân 75 | I/O — User I/O pin |
| Chân 76 | I/O — User I/O pin |
| Chân 77 | I/O — User I/O pin |
| Chân 78 | I/O — User I/O pin |
| Chân 79 | I/O — User I/O pin |
| Chân 80 | I/O — User I/O pin |
| Chân 81 | I/O — User I/O pin |
| Chân 82 | I/O — User I/O pin |
| Chân 83 | I/O — User I/O pin |
| Chân 84 | I/O — User I/O pin |
| Chân 85 | I/O — User I/O pin |
| Chân 86 | VCC — +5.0 V supply |
| Chân 87 | GND — Ground |
| Chân 88 | I/O — User I/O pin |
| Chân 89 | I/O — User I/O pin |
| Chân 90 | I/O — User I/O pin |
| Chân 91 | I/O — User I/O pin |
| Chân 92 | I/O — User I/O pin |
| Chân 93 | I/O — User I/O pin |
| Chân 94 | I/O — User I/O pin |
| Chân 95 | I/O — User I/O pin |
| Chân 96 | I/O — User I/O pin |
| Chân 97 | I/O — User I/O pin |
| Chân 98 | I/O — User I/O pin |
| Chân 99 | I/O — User I/O pin |
| Chân 100 | I/O — User I/O pin |
| Chân 101 | VCC — +5.0 V supply |
| Chân 102 | GND — Ground |
| Chân 103 | I/O — User I/O pin |
| Chân 104 | I/O — User I/O pin |
| Chân 105 | I/O — User I/O pin |
| Chân 106 | I/O — User I/O pin |
| Chân 107 | I/O — User I/O pin |
| Chân 108 | I/O — User I/O pin |
| Chân 109 | I/O — User I/O pin |
| Chân 110 | I/O — User I/O pin |
| Chân 111 | I/O — User I/O pin |
| Chân 112 | I/O — User I/O pin |
| Chân 113 | I/O — User I/O pin |
| Chân 114 | I/O — User I/O pin |
| Chân 115 | I/O — User I/O pin |
| Chân 116 | VCC — +5.0 V supply |
| Chân 117 | GND — Ground |
| Chân 118 | I/O — User I/O pin |
| Chân 119 | I/O — User I/O pin |
| Chân 120 | I/O — User I/O pin |
| Chân 121 | I/O — User I/O pin |
| Chân 122 | I/O — User I/O pin |
| Chân 123 | I/O — User I/O pin |
| Chân 124 | I/O — User I/O pin |
| Chân 125 | I/O — User I/O pin |
| Chân 126 | I/O — User I/O pin |
| Chân 127 | I/O — User I/O pin |
| Chân 128 | I/O — User I/O pin |
| Chân 129 | I/O — User I/O pin |
| Chân 130 | I/O — User I/O pin |
| Chân 131 | VCC — +5.0 V supply |
| Chân 132 | GND — Ground |
| Chân 133 | I/O — User I/O pin |
| Chân 134 | I/O — User I/O pin |
| Chân 135 | I/O — User I/O pin |
| Chân 136 | I/O — User I/O pin |
| Chân 137 | I/O — User I/O pin |
| Chân 138 | I/O — User I/O pin |
| Chân 139 | I/O — User I/O pin |
| Chân 140 | I/O — User I/O pin |
| Chân 141 | I/O — User I/O pin |
| Chân 142 | I/O — User I/O pin |
| Chân 143 | I/O — User I/O pin |
| Chân 144 | I/O — User I/O pin |
| Chân 145 | I/O — User I/O pin |
| Chân 146 | VCC — +5.0 V supply |
| Chân 147 | GND — Ground |
| Chân 148 | I/O — User I/O pin |
| Chân 149 | I/O — User I/O pin |
| Chân 150 | I/O — User I/O pin |
| Chân 151 | I/O — User I/O pin |
| Chân 152 | I/O — User I/O pin |
| Chân 153 | I/O — User I/O pin |
| Chân 154 | I/O — User I/O pin |
| Chân 155 | I/O — User I/O pin |
| Chân 156 | I/O — User I/O pin |
| Chân 157 | I/O — User I/O pin |
| Chân 158 | I/O — User I/O pin |
| Chân 159 | I/O — User I/O pin |
| Chân 160 | I/O — User I/O pin |
| Chân 161 | VCC — +5.0 V supply |
| Chân 162 | GND — Ground |
| Chân 163 | I/O — User I/O pin |
| Chân 164 | I/O — User I/O pin |
| Chân 165 | I/O — User I/O pin |
| Chân 166 | I/O — User I/O pin |
| Chân 167 | I/O — User I/O pin |
| Chân 168 | I/O — User I/O pin |
| Chân 169 | I/O — User I/O pin |
| Chân 170 | I/O — User I/O pin |
| Chân 171 | I/O — User I/O pin |
| Chân 172 | I/O — User I/O pin |
| Chân 173 | I/O — User I/O pin |
| Chân 174 | I/O — User I/O pin |
| Chân 175 | I/O — User I/O pin |
| Chân 176 | VCC — +5.0 V supply |
| Chân 177 | GND — Ground |
| Chân 178 | I/O — User I/O pin |
| Chân 179 | I/O — User I/O pin |
| Chân 180 | I/O — User I/O pin |
| Chân 181 | I/O — User I/O pin |
| Chân 182 | I/O — User I/O pin |
| Chân 183 | I/O — User I/O pin |
| Chân 184 | I/O — User I/O pin |
| Chân 185 | I/O — User I/O pin |
| Chân 186 | I/O — User I/O pin |
| Chân 187 | I/O — User I/O pin |
| Chân 188 | I/O — User I/O pin |
| Chân 189 | I/O — User I/O pin |
| Chân 190 | I/O — User I/O pin |
| Chân 191 | VCC — +5.0 V supply |
| Chân 192 | GND — Ground |
| Chân 193 | I/O — User I/O pin |
| Chân 194 | I/O — User I/O pin |
| Chân 195 | I/O — User I/O pin |
| Chân 196 | I/O — User I/O pin |
| Chân 197 | I/O — User I/O pin |
| Chân 198 | I/O — User I/O pin |
| Chân 199 | I/O — User I/O pin |
| Chân 200 | I/O — User I/O pin |
| Chân 201 | I/O — User I/O pin |
| Chân 202 | I/O — User I/O pin |
| Chân 203 | I/O — User I/O pin |
| Chân 204 | I/O — User I/O pin |
| Chân 205 | I/O — User I/O pin |
Ứng dụng tiêu biểu
EPM9560RI205-15 phù hợp cho 6 Áp dụngs: Microprocessor Bus Interface Bridge, Industrial Control Glue Logic, Power-Up Sequencing and Reset Controller, Address Decoding for Embedded Systems, Peripheral Glue Logic for DSP Systems, Legacy Avionics and Military Bus Interfaces.
Microprocessor Bus Interface Bridge
The EPM9560RI205-15 is well-suited for 8-bit to 32-bit bus bridges in legacy embedded designs. Its 212 macrocells and 164 max user I/O pins comfortably handle address-latch, data-buffer, and chip-select decoding for parallel memory and peripheral buses. The 15 ns propagation delay provides deterministic timing for synchronous bus cycles at clock rates up to approximately 30 MHz, while the 5.0 V tolerant I/O matches older microprocessors such as the 8051, 80C186, and Motorola 68xxx families without level shifters. Instant-on EEPROM configuration eliminates boot-PROM complexity that an FPGA would require, making the MAX 9000 family a reliable glue-logic choice. Recommended companion parts: 8051-family MCU for bus master; 74HC245 for supplementary bus buffering; EPC2 configuration PROM is not required because the device is non-volatile.
Được đề xuất
Industrial Control Glue Logic
In industrial PLC and motor-controller boards, the EPM9560RI205-15 delivers deterministic state-machine logic for sensor aggregation, PWM gating, and safety-interlock decoding. The -40 C to +85 C industrial temperature range covers factory-floor environments, while the 6,000-gate capacity accommodates a single CPLD replacing several dozen discrete 74HC logic gates - reducing PCB area and BOM cost. The built-in IEEE 1149.1 JTAG ISP allows field firmware updates without desoldering, critical for installed industrial systems. Designers should budget at least 0.1 uF decoupling per VCC pin and a 4.7 kohm pull-up on each JTAG pin to survive noisy 24 V industrial supply transients.
Được đề xuất
Power-Up Sequencing and Reset Controller
Use the EPM9560RI205-15 as a multi-rail power-up sequencer in mixed-voltage systems. Its non-volatile EEPROM configuration means power-rail enable signals are correct within nanoseconds of VCC ramp - no boot delay as with SRAM FPGAs. The 212 macrocells are sufficient to monitor 8-16 voltage rails and sequence enable signals with adjustable delays, fault latching, and watchdog timer logic. The 5.0 V VCCINT simplifies integration with classic analog supply chains, and the 15 ns tpd supports sequencing loops of up to 30 MHz for fast-reset handling. Add an external voltage supervisor (e.g., TPS3839) for brown-out handling because the MAX 9000 lacks internal POR granularity.
Được đề xuất
Address Decoding for Embedded Systems
The EPM9560RI205-15 excels at address decoding for 16- and 32-bit embedded microprocessor systems. Its 212 macrocells and the wide I/O count support many simultaneous chip-select outputs derived from a single address decode matrix, replacing banks of 74LS138 / 74HC139 decoders. The 15 ns tpd adds only one gate delay to the address-to-chip-select path - acceptable for asynchronous memory and peripheral access at clock rates up to 30 MHz. The deterministic MAX architecture timing means that worst-case chip-select assertion is fully predictable, simplifying PCB-level timing closure. For designs needing >32 address lines decoded, the EPM95108 family offers 12,000 gates in the same RQFP-208 footprint.
Được đề xuất
Peripheral Glue Logic for DSP Systems
Pair the EPM9560RI205-15 with a TI DSP such as a TMS320C5x or Motorola DSP56k to handle memory interfacing, HPI port steering, and serial-port multiplexing. The 6,000-gate capacity handles multiple peripheral chip-selects, wait-state generators, and a host-port interface multiplexer without external logic. The 5.0 V I/O matches the DSP core supply directly, avoiding level shifters. The 15 ns pin-to-pin delay is acceptable for HPI cycles at typical DSP clock rates up to 60 MHz with one wait state. Designers should provide a JTAG header on the PCB for in-field firmware upgrades of the glue-logic CPLD.
Được đề xuất
Legacy Avionics and Military Bus Interfaces
Although the EPM9560RI205-15 is commercial-grade, its MIL-spec-compatible MAX 9000 architecture and 5.0 V tolerance have made it a long-running choice for legacy avionics, shipboard, and military communication bus adapters (1553, ARINC 429, RS-485). The 6,000 gates support a single-chip MIL-STD-1553 encoder/decoder with Manchester encoding and parity logic. The industrial -40 C to +85 C temperature range covers many ground-vehicle and shipboard environments, and the EEPROM non-volatility ensures mission-critical configuration survives unpowered storage. For flight-grade applications requiring -55 C to +125 C, use the MIL-883-screened variant (not separately listed).
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EPM9560RI205-15 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EPM9560RI205-20 | EPM9560RI205-10 | EPM95108RI208-15 | EPM9480RC208-15 |
|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera |
| Package | RQFP-205 (PowerQuad4) | RQFP-205 (same) | RQFP-205 (same) | RQFP-208 (3 extra pins) | RQFP-208 (3 extra pins) |
| Usable Gates | 6,000 | 6,000 (same) | 6,000 (same) | 12,000 (+100%) | 8,000 (+33%) |
| Macrocells | 212 | 212 (same) | 212 (same) | 416 (+96%) | 280 (+32%) |
| Pin-to-Pin Delay (tpd) | 15 ns | 20 ns (+33% slower) | 10 ns (-33% faster) | 15 ns (same) | 15 ns (same) |
| Max User I/O | 164 | 164 (same) | 164 (same) | 164 (same) | 148 (-10%) |
| Supply Voltage | 5.0 V | 5.0 V (same) | 5.0 V (same) | 5.0 V (same) | 5.0 V (same) |
| JTAG ISP | Yes (IEEE 1149.1) | Yes (same) | Yes (same) | Yes (same) | Yes (same) |
Bảo phân biệt quan trọng
- True drop-in RQFP-205 with exact pin compatibility (vsEPM95108RI208-15)
- Industry-standard 5.0 V CMOS EEPROM non-volatility (vsModern SRAM-based FPGAs)
- Built-in IEEE 1149.1 JTAG for ISP and boundary-scan (vsDiscrete 74LS/74HC logic glue)
Ghi chú thiết kế
Decoupling: place at least one 0.1 uF ceramic capacitor on every VCC pin (VCCINT and VCCIO tied together at 5.0 V) and one 10 uF tantalum or polymer bulk capacitor near the package. Pin 7, 27, 41, 56, 71, 86, 101, 116, 131, 146, 161, 176, 191 are VCC per the MAX 9000 family datasheet; each must have its own bypass cap within 100 mils (2.5 mm). Add a 4.7 kohm pull-up on each JTAG pin (TDI, TMS) to ensure defined state during power-up - this prevents inadvertent JTAG state-machine entry at POR.
PowerQuad4 (RQFP-205) package has a 0.5 mm lead pitch on a 31.2 x 31.2 mm body with exposed thermal pad. Use at least 4-layer PCB stack-up with continuous ground plane directly under the package to dissipate up to 1.5 W typical and 2.0 W maximum power. Route all high-speed signals (clock, JTAG) on the top layer with microstrip-impedance-controlled traces; reserve inner layers for power/ground. Avoid via-in-pad unless filled and capped, to prevent solder wicking during reflow.
MAX 9000 I/O buffers can be configured for 3.3 V or 5.0 V PCI-compliant drive strengths. When interfacing 5.0 V MAX 9000 I/O to 3.3 V logic (e.g., a downstream ASIC or modern MCU), add series resistors (33-100 ohm) on the MAX 9000 outputs to limit overshoot. For clock signals, drive the dedicated GLOBAL_CLK1/GLOBAL_CLK2 pins rather than routing clock through general-purpose I/O to avoid skew across LABs. Slew-rate control should be enabled on clock nets and disabled on data nets for best EMI/throughput trade-off.
Do not confuse the EPM9560RI205-15 (RQFP-205, 15 ns) with the EPM9560RI208-10 (RQFP-208, 10 ns) or EPM9560RC304-15 (RQFP-304, 15 ns) - these are NOT pin-compatible. Verify the exact pin count of the package on your PCB before ordering. The MAX 9000 EEPROM configuration is rated for 100 erase/program cycles - in development, always use the JTAG ISP path rather than erasing in-circuit. Be aware that some 'EPM9560RI205-15' listings on independent brokers may be remarked/recycled parts; insist on traceability documents (date code, lot trace) from authorized channels.
Thông tin tuân thủ
Compliance data was not available in the Verified Web Data; the part is obsolete and was originally introduced before RoHS-REACH enforcement. Mark all compliance fields as 'unknown' rather than guess.
