Analog Devices

MAX232BEAWE+ - 2/2 RS-232 Transceiver | Analog Devices

MPN: MAX232BEAWE+ ✓ Hoạt động
16-pin SOIC Package
MOQ: 1 |

MAX232BEAWE+ Tóm tắt

The Analog Devices MAX232BEAWE+ is a 2/2 RS-232 transceiver integrated circuit packaged in a 16-pin SOIC. It combines two RS-232 drivers and two receivers in one device, providing a compact interface between logic-level UART equipment and a ±3 to ±15 V RS-232 communications link. The MAX232 family uses on-chip charge-pump circuitry to generate the bipolar voltage required by the RS-232 driver outputs, reducing the external component count compared with discrete level-shifting designs.

An RS-232 transceiver is a signal-conversion device used to bridge the logic-voltage domain of a microcontroller, computer, or programmable controller and the voltage-domain requirements of an RS-232 port. Within the interface IC hierarchy, the MAX232BEAWE+ belongs to the RS-232 transceiver class of serial-interface ICs. Its two-driver, two-receiver arrangement suits point-to-point serial links that require bidirectional communication but do not need the larger channel count of a four-driver, four-receiver RS-232 implementation.

The principal benefits are functional integration and compact PCB occupancy. Two transmit channels and two receive channels share one 16-pin SOIC package, while integrated level translation allows the same IC to support both RS-232 output and input signals. The package is suitable for conventional surface-mount PCB assembly, and the + suffix identifies the manufacturer's lead-free commercial ordering configuration. Because the MAX232 family is widely used in RS-232 equipment, designers can generally simplify firmware changes by treating the transceiver as a transparent UART-to-RS-232 interface.

RS-232 transmitters require more voltage and current than ordinary CMOS or bipolar logic outputs. The MAX232BEAWE+ therefore functions as an interface boundary rather than as a general-purpose logic driver. Its internal charge-pump circuitry creates the bipolar voltage used by the drivers, while the receivers convert incoming RS-232 signals to a compatible logic level. This division of responsibilities allows the connected UART controller to operate with ordinary push-pull or open-drain interface circuitry while the cable side uses RS-232 levels.

Typical uses include industrial serial-control equipment, test and measurement instruments, data-acquisition systems, configuration ports, and legacy service interfaces. A two-channel implementation can support one bidirectional communications path with an additional transmitter or receiver when directional requirements differ. It is also appropriate for embedded systems that retain an RS-232 port for compatibility with printers, scanners, controllers, or laboratory equipment even when the rest of the product uses modern digital interfaces.

PCB implementation should follow the Analog Devices MAX232 datasheet for charge-pump capacitor placement, signal routing, and grounding. Keep the charge-pump capacitor connections short, provide the required ceramic capacitance close to the device, and route RS-232 driver outputs away from sensitive receiver inputs. Confirm the connector, cable, grounding, and logic levels before releasing the PCB because the IC solves voltage translation but does not define the complete RS-232 physical interface.

This page combines the exact MAX232BEAWE+ package and interface configuration with same-family drop-in options, application guidance, comparison parameters, and practical RS-232 layout considerations. The alternatives are separated from cross-package designs so an engineer can focus on parts that preserve the 16-pin SOIC footprint.

Bộ thay thế dễ dàng lắp đặt cho MAX232BEAWE+ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX232BEAWE+ (cùng hình factor và footprint) — khác nhau ở Product Type, Interface Standard, Maximum Data Rate, Transceiver Configuration, Supply Voltage.

Maxim Integrated
Product Type: RS-232 line-driver and receiver transceiver
Interface Standard: EIA/TIA-232E and V.28/V.24
Supply Voltage: +5 V
So sánh với MAX232BEAWE+ →
Analog Devices
Maximum Data Rate: 200 kb/s
Transceiver Configuration: 2/2 full-duplex
Supply Voltage: +5 V
So sánh với MAX232BEAWE+ →
Analog Devices
Product Type: RS-232 transceiver
Maximum Data Rate: 200 kbps
So sánh với MAX232BEAWE+ →
Analog Devices
Product Type: RS-232 transceiver interface IC
Interface Standard: EIA/TIA-232E and CCITT V.28
Maximum Data Rate: 120 kbps
So sánh với MAX232BEAWE+ →
Analog Devices
Product Type: Dual RS-232 transceiver
Maximum Data Rate: 120 kbps
Transceiver Configuration: 2 transmitter and 2 receiver channels
So sánh với MAX232BEAWE+ →

MAX232ESE+T

✅ Drop-In ⚠️ Thông số chưa được xác minh
Analog Devices
📦 16-SOIC
RS-232 transceiver interface IC · 2 drivers and 2 receivers · 4.5 V to 5.5 V · 120 kbps · EIA/TIA-232E and CCITT V.28 · V.28 and V.24 · On-chip capacitive voltage generator · 16 pins

Liên hệ để biết giá

Xem tài liệu →

MAX232BAWE+

✅ Drop-In ⚠️ Thông số chưa được xác minh
Analog Devices
📦 16-SOIC
RS-232 transceiver · 2 · 2 · Full duplex · 200 kbps · 4.5 V to 5.5 V · 500 mV · 0°C to +70°C

Liên hệ để biết giá

Xem tài liệu →

MAX232AEWE+

✅ Drop-In ⚠️ Thông số chưa được xác minh
Analog Devices
📦 16-SOIC
2 drivers · 2 receivers · 2/2 full-duplex · RS-232 · +5 V · 200 kb/s · 16-pin SOIC · 7.50 mm

Liên hệ để biết giá

Xem tài liệu →

MAX232ACWE+

✅ Drop-In ⚠️ Thông số chưa được xác minh
Maxim Integrated
📦 16-SOIC
RS-232 line-driver and receiver transceiver · 2 transmitters / 2 receivers · +5 V · EIA/TIA-232E and V.28/V.24 · 16-pin SOIC · Surface mount

Liên hệ để biết giá

Xem tài liệu →

MAX232EWE+

✅ Drop-In ⚠️ Thông số chưa được xác minh
Analog Devices
📦 16-SOIC
Dual RS-232 transceiver · RS-232 · 4.5 V to 5.5 V · 5 V · 2 channels · 2 channels · 120 kbps · CMOS

Liên hệ để biết giá

Xem tài liệu →

MAX232BEAWE+ Thông số kỹ thuật

Transceiver Configuration 2/2
Driver Count 2 drivers
Receiver Count 2 receivers
Interface Standard RS-232
Hộp 16-pin SOIC
Số chân 16 pins
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân MAX232BEAWE+ 16-pin soic

Cấu hình chân cho MAX232BEAWE+ (16-pin soic gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 16-pin soic cho MAX232BEAWE+

Không có dữ liệu chân cụ thể sẵn có cho MAX232BEAWE+.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MAX232BEAWE+ phù hợp cho 6 Áp dụngs: Industrial Serial-Control Interface, Test and Measurement Equipment, Data-Acquisition System, Legacy Printer and Scanner Interface, Configuration Port for Embedded Equipment, Security and Access-Control Equipment.

🏭

Industrial Serial-Control Interface

The MAX232BEAWE+ fits industrial equipment that retains an RS-232 service or control port while using a modern UART controller. Its two drivers and two receivers can support one bidirectional channel plus an additional directional signal pair, and the 16-pin SOIC keeps the interface compact. The IC handles the logic-to-RS-232 voltage conversion in one package, reducing the number of discrete level-shifters required. For deployment, verify the specified temperature range, design the charge-pump capacitor network according to the MAX232 datasheet, and use a suitable industrial connector. The surrounding controller still needs UART configuration, while the MAX232BEAWE+ provides the physical electrical boundary to the RS-232 cable.

🔧

Test and Measurement Equipment

Test instruments, programmable power supplies, and laboratory controllers often use RS-232 for legacy instrument control. The MAX232BEAWE+ provides two drivers and two receivers in a 16-pin SOIC, allowing a controller to exchange commands and receive measurements without a separate level-conversion board. Because the interface is presented to firmware as ordinary UART logic, existing command protocols can remain unchanged. Designers should follow the manufacturer capacitor and layout recommendations, keep driver outputs isolated from receiver inputs, and confirm the instrument's RS-232 polarity. This arrangement is especially useful when a product has several internal rails but only one service port.

📟

Data-Acquisition System

A data-acquisition controller can use the MAX232BEAWE+ to connect a UART processor or embedded control section to a remote RS-232 sensor, analyzer, or fixture. The 2/2 channel arrangement supports a bidirectional command link and can carry additional request or status signaling. Its 16-pin SOIC package limits PCB area while integrating the driver, receiver, and voltage-generation circuitry. A practical design should reserve a continuous common ground, apply the datasheet's charge-pump capacitor values, and place protection components where the cable enters the enclosure. Firmware should treat the interface as a UART peripheral and use framing or parity appropriate to the connected equipment.

🖨️

Legacy Printer and Scanner Interface

The MAX232BEAWE+ is useful in embedded systems that must communicate with a legacy RS-232 printer, scanner, or terminal. Two transmitters and two receivers provide enough channels for bidirectional data and handshake signals without occupying a large portion of the board. The device converts ordinary UART signals to RS-232 levels, so the host processor does not need to generate bipolar cable voltages directly. Keep the cable-side traces away from sensitive analog circuitry, use the package ground as the circuit reference, and follow the connector's signal assignments. For new multi-port products, a higher-channel interface may reduce the number of required transceiver packages.

🧩

Configuration Port for Embedded Equipment

Embedded controllers can use the MAX232BEAWE+ for a manufacturing, field-service, or configuration port that accepts commands from a laptop or service terminal. The two-driver, two-receiver arrangement handles both command transmission and response signaling in a 16-pin SOIC. This allows a modern product to retain a simple maintenance path without exposing the UART pins directly to a cable. Design the port so the configuration interface can be disabled or physically isolated when not required. Check connector overvoltage protection, ground continuity, and the logic levels used by the attached host. The MAX232 datasheet remains the controlling reference for capacitor selection and signal routing.

🔐

Security and Access-Control Equipment

Access-control panels, credential readers, and security peripherals may use RS-232 for diagnostic or configuration communication. The MAX232BEAWE+ provides a compact two-channel interface with two RS-232 drivers and two receivers in a 16-pin SOIC. It can connect a supervisory controller to a legacy reader while preserving a standard UART-based firmware interface. Cable-side protection remains important because an external RS-232 port may be exposed to ESD and ground-potential differences. Place protection and the transceiver close to the connector, use a controlled ground reference, and keep the connector interface separate from security-critical power paths. Verify temperature and lifecycle requirements for the intended installation environment.

What is the MAX232BEAWE+?
The MAX232BEAWE+ is a 2/2 RS-232 transceiver from Analog Devices with two drivers and two receivers in a 16-pin SOIC package. According to the Analog Devices MAX232 datasheet, this device family integrates the bipolar voltage-generation and level-conversion circuitry required to connect a UART-based controller to an RS-232 port. It is intended for equipment that retains an RS-232 interface but needs a compact surface-mount implementation.
Where can I download the MAX232BEAWE+ datasheet PDF?
The MAX232BEAWE+ datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/MAX232.pdf. The manufacturer document should be used for the complete pin-description table, electrical characteristics, charge-pump capacitor requirements, and recommended layout. The exact MAX232BEAWE+ order code should be confirmed against the ordering information before production release.
Where can I find the MAX232BEAWE+ pinout?
Use the pin-description table and package drawing in the Analog Devices MAX232 datasheet to assign the MAX232BEAWE+ connections. The device is identified in the product listings as a 2/2 RS-232 transceiver in a 16-pin SOIC. Keep the driver and receiver nets separate from the charge-pump capacitor network when tracing the schematic, and verify all connector-side polarity against the selected RS-232 interface.
What is the difference between MAX232BEAWE+ and MAX232ESE+T?
MAX232BEAWE+ and MAX232ESE+T both belong to the MAX232 2/2 RS-232 transceiver family and use a 16-pin SOIC, making MAX232ESE+T a close same-footprint candidate. The order codes use different qualification or temperature-grade fields, so the exact operating-temperature limits must be compared before substitution. The transceiver count remains 2 drivers and 2 receivers, a 0% functional-count difference.
When should I choose MAX232BEAWE+ over another MAX232 variant?
Choose MAX232BEAWE+ when the design needs exactly two RS-232 drivers and two receivers in a 16-pin SOIC and its specified temperature range, supply arrangement, and ordering code meet the product requirements. A MAX232 variant offering additional channels may simplify consolidation but can change board area or channel count. The correct selection criterion is electrical and package compatibility, not similarity in the family name.
Is MAX232BEAWE+ suitable for industrial serial-control equipment?
The MAX232BEAWE+ is suitable for RS-232 serial-control equipment when its manufacturer-specified electrical limits and temperature grade meet the operating environment. Its 2-driver, 2-receiver configuration covers one bidirectional link plus additional directional channels, while the 16-pin SOIC simplifies PCB assembly. Confirm industrial temperature requirements, ESD strategy, isolation needs, and grounding before using it in a deployed control system.
Where can I buy MAX232BEAWE+ online?
Use the Request a Quote form on this page to ask for MAX232BEAWE+ availability, current lead time, and an order quotation. The form lets you submit the exact manufacturer part number and required package or shipment details without relying on a static listing price. Production planners should also request date-code and traceability requirements when the equipment is used in a regulated or safety-relevant application.
What is the price of MAX232BEAWE+?
The current commercial price for MAX232BEAWE+ is obtained through the Request a Quote form on this page. Quote requests should specify the exact MAX232BEAWE+ order code, quantity, and required delivery terms. Because market pricing and availability can change, use the form rather than a historical price reference when preparing a purchase order or production budget.
What is the lead time for MAX232BEAWE+?
Request the current MAX232BEAWE+ lead time through the Request a Quote form on this page. Include your annual usage, forecast horizon, shipment destination, and required date-code policy so the supplier can respond with a meaningful schedule. Treat any lead-time statement as a quotation-specific commitment and confirm it before freezing the manufacturing plan.
Is MAX232BEAWE+ in stock?
Use the Request a Quote form on this page to check current MAX232BEAWE+ stock and allocation. Include the required quantity and target delivery date in the request. For new production builds, ask whether the quoted material is factory stock, newly manufactured, or allocated from another order because these conditions can affect delivery timing.
What is the best drop-in replacement for MAX232BEAWE+?
MAX232ESE+T is the closest listed drop-in candidate because it preserves the 2/2 transceiver arrangement and 16-pin SOIC footprint. MAX232BAWE+, MAX232AEWE+, MAX232ACWE+, and MAX232EWE+ are additional same-family candidates. Before release, compare operating-temperature grade, supply voltage, electrical limits, lifecycle status, and the exact manufacturer pin description; a matching package alone does not prove production equivalence.
Can MAX232ESE+T replace MAX232BEAWE+?
MAX232ESE+T can be considered as a pin-compatible MAX232 replacement because both are 2/2 RS-232 devices in a 16-pin SOIC. The transceiver configuration and package match are 2-of-2 channels and 16-of-16 pins, while the order-code qualification fields differ. Confirm temperature limits, RoHS and REACH status, key electrical characteristics, and lifecycle status in the manufacturer documentation before approving the substitution.
What can replace MAX232BEAWE+?
The practical replacement set includes MAX232ESE+T, MAX232BAWE+, MAX232AEWE+, MAX232ACWE+, and MAX232EWE+ because each remains within the MAX232 family and preserves the 16-pin SOIC interface concept. Treat these as qualified-drop-in candidates rather than unconditional replacements. Review the MAX232 datasheet, especially temperature grade, supply requirements, and ordering suffixes, for the exact board being converted.
What are the key specifications of MAX232BEAWE+ that engineers should know?
The key MAX232BEAWE+ specifications are a 2/2 transceiver configuration, two RS-232 drivers, two RS-232 receivers, and a 16-pin SOIC package. Analog Devices identifies the device as a full RS-232 transceiver, while the manufacturer datasheet defines the electrical limits and charge-pump implementation. Those four points determine channel count, PCB footprint, and the basic application class before the detailed operating characteristics are considered.
Is MAX232BEAWE+ the same as MAX232AEWE+?
MAX232BEAWE+ and MAX232AEWE+ share the MAX232 2/2 RS-232 function and 16-pin SOIC package, so MAX232AEWE+ is a strong footprint-compatible alternative. Their ordering codes differ in the qualification or temperature fields, which can produce meaningful application differences. The driver and receiver counts show a 0% difference, but operating-temperature and lifecycle requirements must be checked independently.

Dữ liệu tham khảo kỹ thuật cho MAX232BEAWE+ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose MAX232BEAWE+ when the design requires exactly two RS-232 drivers and two receivers in a 16-pin SOIC and the device's operating limits match the product environment. MAX232ESE+T is the closest same-family candidate because it preserves the 2/2 configuration and package, but its order-code qualification fields should be checked carefully. MAX232BAWE+, MAX232AEWE+, MAX232ACWE+, and MAX232EWE+ are additional footprint-compatible candidates for supply diversification or lifecycle planning. Select a higher-channel MAX3232 or MAX3243 device when four or more full driver and receiver channels are needed. If the board already contains a different package footprint, do not use this list; validate the complete pin arrangement, supply voltage, temperature grade, charge-pump capacitor network, and regulatory requirements before release.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MAX232ESE+T MAX232BAWE+ MAX232AEWE+ MAX232ACWE+ MAX232EWE+
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Transceiver Configuration 2/2 2/2 2/2 2/2 2/2 2/2
Driver Count 2 drivers 2 drivers 2 drivers 2 drivers 2 drivers 2 drivers
Receiver Count 2 receivers 2 receivers 2 receivers 2 receivers 2 receivers 2 receivers
Interface Standard RS-232 RS-232 RS-232 RS-232 RS-232 RS-232

Bảo phân biệt quan trọng

  • Compact two-channel RS-232 integration (vsMAX3243ECDWR)
  • Exact same-family footprint alternative (vsMAX232ESE+T)
  • Direct UART-to-RS-232 interface (vsMAX202EEWE-T)

Ghi chú thiết kế

Place the charge-pump capacitor and its associated traces immediately beside the MAX232BEAWE+ pins, following the exact capacitor value and polarity or connection shown in the Analog Devices MAX232 datasheet. Keep these high-current charge-pump paths short and away from UART receiver traces. The 16-pin SOIC footprint simplifies assembly, but correct capacitor placement remains important for stable driver voltage generation and low output distortion.

Separate the cable-side RS-232 nets from low-level analog and clock signals. Route driver outputs directly toward the connector and avoid placing them beneath sensitive inputs or shared reference planes. Connect the transceiver ground to the interface ground near the IC, and evaluate the need for a dedicated connector-side protection network. This arrangement reduces capacitive coupling and helps prevent driver transitions from disturbing adjacent circuitry.

Do not substitute a MAX232 part solely because it has the same family name or a 16-pin package. Confirm the 2/2 channel configuration, supply arrangement, operating-temperature grade, pin names, and lifecycle status against the manufacturer datasheet. The 2/2 designation means two drivers and two receivers, so applications requiring four full RS-232 channels need a higher-channel transceiver. Also check connector DTE or DCE polarity before PCB release.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The + ordering suffix indicates a lead-free packaging configuration, but formal RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 status require confirmation from the manufacturer product page or declaration.

Tìm kiếm liên quan

MAX232BEAWE+ datasheet MAX232BEAWE+ datasheet pdf MAX232BEAWE+ pinout MAX232BEAWE+ replacement MAX232BEAWE+ equivalent MAX232BEAWE+ price MAX232BEAWE+ stock Analog Devices MAX232BEAWE+ MAX232 2/2 RS-232 transceiver MAX232BEAWE+ 16-SOIC MAX232BEAWE+ industrial interface MAX232BEAWE+ vs MAX232ESE+T

Các bộ phận và thuật ngữ liên quan

Analog Devices MAX232BEAWE+ MAX232ESE+T MAX232BAWE+ MAX232AEWE+ MAX232ACWE+ MAX232EWE+ RS-232 RS-232 transceiver line driver line receiver UART interface IC serial interface charge-pump voltage converter logic-level conversion 16-SOIC SOIC family surface-mount package industrial serial control test and measurement equipment data acquisition RoHS REACH
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ