EP2SGX90FF1152 - 90K LE Stratix II GX FPGA, 1152-BGA | Altera
MPN： EP2SGX90FF1152 ⚠ 最後購買機會EP2SGX90FF1152 概覽
A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit based on a matrix of configurable logic blocks (CLBs) connected via programmable interconnect. Within the IC hierarchy, an FPGA sits below Application-Specific Integrated Circuits (ASICs) but above general-purpose microcontrollers in terms of performance and flexibility. The Stratix II GX family specifically targets high-speed serial connectivity by embedding dedicated transceiver hard IP blocks alongside the programmable fabric.
Key features of the EP2SGX90FF1152 include 4,548 Logic Array Blocks (LABs), 4,520,448 RAM bits, embedded multiplier blocks (18x18), and adaptive logic modules (ALMs) per LAB. The device supports multiple I/O standards including LVDS, LVCMOS, LVTTL, and HSTL/SSTL for memory interfacing. Transceivers operate up to 6.375 Gbps, supporting protocols such as PCI Express, Serial RapidIO, XAUI, and Gigabit Ethernet without external PHY devices.
Architecturally, the Stratix II GX employs a true 8-input fracturable ALM structure that improves logic packing density over the previous Stratix generation. Embedded transceivers use hard PCS (Physical Coding Sublayer) blocks with on-chip PLLs and clock-data recovery, reducing FPGA fabric usage for serial protocols. The 1.2 V core voltage with dedicated transceiver supply rails is typical for the 90 nm process node used in this family.
Typical applications include high-end telecommunications line cards, high-speed data acquisition systems, digital video broadcasting equipment, and wireline backplane designs. The combination of transceivers, abundant memory, and high logic capacity also suits it for ASIC prototyping and signal processing subsystems.
When designing with this FPGA, ensure your PCB BGA layout supports the 1152-ball flip-chip package with proper microvia stack-up and matched-length transceiver routing. Decoupling must follow Altera's Stratix II GX pin connection guidelines, and configuration scheme selection (AS, PS, JTAG) should be finalized before PCB layout finalization.
This page consolidates distributor pricing, drop-in same-package alternatives from the Stratix II GX family, and practical design considerations beyond the datasheet to help engineers select and source this mature FPGA for long-lifecycle designs.
直接替換替代品，適用於 EP2SGX90FF1152 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： EP2SGX90FF1152 （相同外形與佔位） — 差異在於 Package, Operating Temperature, Speed Grade, Family, Transceivers.
EP2SGX90EF1152C4N
✅ 直接替換聯絡詢價
查看資料表 →EP2SGX90EF1152C5N
✅ 直接替換聯絡詢價
查看資料表 →EP2SGX90EF1152I4N
✅ 直接替換聯絡詢價
查看資料表 →EP2SGX90EF1152C3N
✅ 直接替換聯絡詢價
查看資料表 →EP2SGX90EF1152I5N
✅ 直接替換聯絡詢價
查看資料表 →EP2SGX90FF1152C3
✅ 直接替換聯絡詢價
查看資料表 →EP2SGX90FF1152 最大額定值與電氣特性
| Series | Stratix II GX |
| Family | FPGA |
| Logic Elements (LE) | 90,960 |
| Logic Array Blocks (LABs) | 4,548 |
| Embedded Memory (RAM bits) | 4,520,448 |
| User I/Os | 558 |
| Transceivers | Up to 20 channels |
| Transceiver Data Rate | Up to 6.375 Gbps |
| Core Voltage | 1.2 V |
| Process Node | 90 nm |
| 封裝 | 1152-ball FC-FBGA (Flip-Chip) |
| 安裝類型 | Surface Mount |
| RoHS 狀態 | Compliant |
| Lead-Free | Yes |
EP2SGX90FF1152 1152-ball fc-fbga (flip-chip) 腳位配置指南
EP2SGX90FF1152（1152-ball fc-fbga (flip-chip) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： EP2SGX90FF1152.
請參閱 資料表 以查看完整腳位配置。
典型應用
EP2SGX90FF1152 適用於 6 應用s: High-Speed Telecommunications Line Cards, ASIC Prototyping and Emulation, Digital Video Broadcasting Equipment, Wireline Backplane Aggregation, High-Speed Data Acquisition Systems, Military and Aerospace Signal Processing.
High-Speed Telecommunications Line Cards
The EP2SGX90FF1152's 20 embedded transceivers at up to 6.375 Gbps make it ideal for telecom line cards handling multi-protocol serial traffic. Its 90,960 logic elements and 4,520,448 RAM bits enable on-chip packet processing and buffering. Placed as the central fabric between framer/phy devices and network processor ASICs, it eliminates external glue logic. Trade-off: 90 nm process yields higher power per channel than modern 28 nm Stratix V, but lifecycle maturity suits telecom refresh cycles.
推薦
ASIC Prototyping and Emulation
The EP2SGX90FF1152's high logic capacity (90,960 LEs) and abundant interconnect make it well-suited to ASIC prototyping platforms. Engineers can partition large ASIC RTL into multiple FPGAs via the Stratix II GX native multi-FPGA partitioning flow. The 4,520,448 embedded RAM bits provide ample trace memory for debug. Unlike ASICs, the prototype is fully re-programmable, enabling fast iteration. Trade-off: ASIC frequency is 3-5x faster than FPGA prototypes, so timing closure requires careful synthesis constraints.
推薦
Digital Video Broadcasting Equipment
The EP2SGX90FF1152 supports HD-SDI and 3G-SDI serial video interfaces via its embedded transceivers at 1.485 Gbps and 2.97 Gbps respectively. Its DSP blocks accelerate video processing functions such as scaling, de-interlacing, and color space conversion. The 558 user I/Os allow direct connection to DDR2 memory and video ADCs/DACs. Placed as the central video pipeline processor, it eliminates multiple ASSPs. Trade-off: video processing latency is deterministic but higher than purpose-built video SoCs.
推薦
Wireline Backplane Aggregation
The EP2SGX90FF1152's transceivers support XAUI (4x3.125 Gbps), Serial RapidIO, and PCIe Gen1/Gen2 for wireline backplane aggregation across ATCA or AdvancedMC shelves. The hard PCS implements 8b/10b encoding without consuming fabric logic, freeing LEs for switching and queuing functions. 4,520,448 RAM bits provide packet buffering at line rate. Trade-off: backplane routing requires careful signal integrity design; consult the Stratix II GX board design guidelines.
推薦
High-Speed Data Acquisition Systems
The EP2SGX90FF1152's transceivers connect directly to high-speed ADCs and DACs via JESD204B (subclass support depends on soft IP) or LVDS interfaces. The embedded 18x18 multipliers and DSP blocks accelerate FFT, FIR, and digital down-conversion in software-defined radio pipelines. 558 I/Os allow direct parallel LVDS ADC connection up to 1 Gsps. Placed between the analog front-end and host processor, it performs real-time DSP. Trade-off: 90 nm static power is higher than modern 28/20 nm FPGAs.
推薦
Military and Aerospace Signal Processing
The EP2SGX90FF1152 (industrial temperature grade variants) is suitable for military and aerospace signal processing subsystems including radar, electronic warfare, and satellite communications. Its transceivers handle high-speed data links to RF converters, and abundant logic supports beamforming and channelization algorithms. Long lifecycle support makes it suited to programs with 10-15 year deployment horizons. Trade-off: full MIL-PRF screening is not available; commercial/industrial grade only.
推薦
推薦產品摘要
工程參考資料，適用於 EP2SGX90FF1152 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | EP2SGX90EF1152C4N | EP2SGX90EF1152C5N | EP2SGX90EF1152I4N | EP2SGX90EF1152C3N | EP2SGX90EF1152I5N |
|---|---|---|---|---|---|---|
| Package | 1152-ball FC-FBGA | 1152-ball FC-FBGA - same | 1152-ball FC-FBGA - same | 1152-ball FC-FBGA - same | 1152-ball FC-FBGA - same | 1152-ball FC-FBGA - same |
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Logic Elements | 90,960 | 90,960 | 90,960 | 90,960 | 90,960 | 90,960 |
| Embedded Memory (RAM bits) | 4,520,448 | 4,520,448 | 4,520,448 | 4,520,448 | 4,520,448 | 4,520,448 |
| User I/Os | 558 | 558 | 558 | 558 | 558 | 558 |
| Speed Grade | unspecified (default) | C4 (mid) | C5 (fast) | I4 (industrial) | C3 (slow) | I5 (industrial fast) |
| Temperature Grade | unspecified (default commercial) | Commercial | Commercial | Industrial | Commercial | Industrial |
| Lifecycle Status | Last Time Buy | Last Time Buy | Last Time Buy | Last Time Buy | Last Time Buy | Last Time Buy |
| Transceiver Channels | Up to 20 | Up to 20 | Up to 20 | Up to 20 | Up to 20 | Up to 20 |
| Transceiver Max Data Rate | 6.375 Gbps | 6.375 Gbps | 6.375 Gbps | 6.375 Gbps | 6.375 Gbps | 6.375 Gbps |
主要差異化特點
- Drop-in compatible speed grade and temperature options (對比EP2SGX90EF1152C4N)
- Industrial temperature range availability in same package (對比EP2SGX90EF1152I4N)
- Six available drop-in speed/temperature bins for supply flexibility (對比EP2SGX90EF1152C5N)
設計說明
The 1152-ball FC-FBGA package requires high-density PCB interconnect with microvia stack-up (typically 8-12 layers). Use 0.4mm or 0.5mm pitch BGA escape routing with via-in-pad or dog-bone fanout. Maintain 50 ohm controlled impedance for transceiver channels and matched-length routing within the tolerances specified in the Stratix II GX Device Handbook. Decoupling requires dozens of 0.1 uF and 10 uF ceramic capacitors placed as close to power balls as possible to suppress transient current demand during logic switching.
Estimated: Stratix II GX devices at 90 nm have core current of several amps at 1.2 V plus separate transceiver and I/O supply rails. Use a multi-rail power distribution network with bulk decoupling on each rail and follow Altera's power distribution network (PDN) design guidelines. Include power-on-reset sequencing to ensure proper rail ramp order and avoid latch-up. Estimated total power dissipation under typical utilization can reach 10-20 W, requiring thermal management.
Transceiver channels operating at 6.375 Gbps require pre-emphasis and equalization configuration. Use the Altera Quartus II Transceiver Toolkit to characterize channel performance and tune pre-emphasis, VOD (voltage output differential), and receiver CTLE settings. Reference clock jitter must be below the value specified in the Stratix II GX datasheet for the chosen protocol. Maintain 100 ohm differential impedance on transceiver pairs with matched P/N lengths within 150 mil.
Do not leave unused transceiver channels floating - tie per the Stratix II GX pin connection guidelines. Configuration mode (AS/PS/JTAG) must be selected via MSEL pins and matches the chosen configuration device (e.g., EPCS64). Avoid using I/O standards without checking voltage compatibility with bank VCCIO supplies. When migrating from other FPGA families, recompile all RTL in Quartus II; do not assume bitstream compatibility.
合規資訊
RoHS compliant per Altera/Intel product page. AEC-Q100 not applicable for FPGAs. Halogen-free status not explicitly stated in the verified web data.
