onsemi

LM2904VNG - Dual 30V Operational Amplifier | onsemi

MPN: LM2904VNG ✓ 啟用中
3 V to 32 V Vdss 8-DIP (0.300 in, 7.62 mm pitch) Package
MOQ: 1 |

LM2904VNG 概覽

onsemi LM2904VNG is a dual, general-purpose operational amplifier designed for single-supply or split-supply operation, with a stated supply range of 3 V to 26 V or up to 32 V depending on the specific device specification source. It contains two independent, high-gain, frequency-compensated amplifiers and is packaged in an 8-pin PDIP package. The LM2904 family is based on the circuit designs used in the LM358 series, which provides a practical family relationship for signal conditioning and general-purpose analog designs. The device is listed by onsemi and is associated with a 0.6 V/µs slew rate and 1 MHz gain-bandwidth product in the retrieved component description.

An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages while using external feedback to define the closed-loop gain. The dual configuration provides two amplifier channels in one package, making it useful for signal conditioning, buffering, filtering, transducers, instrumentation, and control applications. The LM2904VNG operates from a single supply or split supply, and its common-mode input voltage range extends to ground or VEE. This makes it appropriate for circuits that use low-voltage sensing or single-rail power arrangements where the input signal approaches the lower supply rail.

Key characteristics include two amplifier circuits, a general-purpose amplifier type, 1 MHz gain-bandwidth product, 0.6 V/µs slew rate, operation from 3 V to 32 V, and an 8-pin PDIP package. The package is specified as an 8-DIP measuring 0.300 inches, or 7.62 mm, in pitch. The component is identified as a tube-packaged part in the retrieved datasheet description, making it suitable for conventional through-hole PCB assembly rather than surface-mount reflow.

The LM2904 family is commonly selected when a design requires a dual amplifier with broad supply-voltage capability and flexible supply configurations. Its internally frequency-compensated architecture simplifies the construction of standard amplifier stages, while the common-mode input range extending toward ground or VEE supports single-supply sensor interfaces. The operating-amplifier category sits within analog integrated circuits and broader signal-chain design, where the device can sit between sensors, analog converters, filters, and actuator drivers.

Typical applications include low-side current or voltage sensing, audio and communications signal conditioning, industrial control modules, regulated power-supply feedback, and general dual-stage amplifier boards. In an instrumentation circuit, the two channels can amplify or buffer two related signals, while in a control system they can monitor a feedback signal and drive a downstream conditioning stage. The device should be selected only after checking the exact onsemi datasheet for input common-mode limits, output swing, output-current capability, electrical characteristics, and package details.

The principal design consideration is supply and signal-headroom management. Although the LM2904 family supports single-supply operation, the usable output range and input common-mode range are not identical to the supply range. Resistor networks, decoupling capacitors, and careful grounding should be selected according to the manufacturer application guidance. This page combines the exact package, amplifier, voltage, bandwidth, slew-rate, and supply information shown in the component records with practical guidance for evaluating the LM2904VNG in industrial, communications, audio, sensor, and power-control designs.

直接替換替代品,適用於 LM2904VNG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LM2904VNG (相同外形與佔位) — 差異在於 Package, Slew Rate, Mounting Type, Gain-Bandwidth Product, Common-Mode Input Range.

Texas Instruments
Package: SOIC-8 (D)
Slew Rate: 0.5 V/us (typical)
Mounting Type: Surface Mount
比較對象 LM2904VNG →
Texas Instruments
Package: 8-SOIC (D)
Slew Rate: 0.3 V/us
Mounting Type: Surface Mount
比較對象 LM2904VNG →
Texas Instruments
Package: 8-PDIP
Gain-Bandwidth Product: 700 kHz
比較對象 LM2904VNG →
onsemi
Package: Micro-8
Mounting Type: Surface mount
Common-Mode Input Range: Extends to ground or VEE
比較對象 LM2904VNG →

LM2904NG

✅ 直接替換
onsemi
📦 8-DIP (0.300 in, 7.62 mm pitch)
General Purpose · 2 · 1 MHz · 0.6 V/µs · 3 V to 26 V · -40C to +105C · PDIP-8 (0.300 in, 7.62 mm) · Through Hole

聯絡詢價

查看資料表 →

LM2904P

✅ 直接替換
Texas Instruments
📦 8-DIP (0.300 in, 7.62 mm pitch)
Dual operational amplifier · 2 · 26 V · 700 kHz · 8-PDIP · Through-hole · Standard general-purpose amplifier

聯絡詢價

查看資料表 →

LM2904VDMR2

✅ 直接替換
onsemi
📦 8-DIP (0.300 in, 7.62 mm pitch)
Dual operational amplifier · 2 channels · 3 V to 32 V · 26 V · 1 MHz · Extends to ground or VEE · Single supply or split supply · Low power drain

聯絡詢價

查看資料表 →

LM2904BIDR

✅ 直接替換
Texas Instruments
📦 8-DIP (0.300 in, 7.62 mm pitch)
Texas Instruments · Industry-standard dual operational amplifier · 2 (Dual) · 3 V to 36 V · +/-1.5 V to +/-18 V · 1.2 MHz · 0.5 V/us (typical) · 0.5 mV typical / 3 mV maximum

聯絡詢價

查看資料表 →

LM2904DR

✅ 直接替換
Texas Instruments
📦 8-DIP (0.300 in, 7.62 mm pitch)
2 · 3 V to 26 V · ±1.5 V to ±13 V · 700 kHz · 0.3 V/us · 2 mV (typical) · 500 uA (typical) · 0.7 mA (typical)

聯絡詢價

查看資料表 →

LM2904VNG 最大額定值與電氣特性

Amplifier Type General Purpose
Number of Circuits 2 circuits
Supply Voltage Range 3 V to 32 V
Single-Supply Operation Supported
Split-Supply Operation Supported
Common-Mode Input Voltage Range Extends to ground/VEE
Gain-Bandwidth Product 1 MHz
Slew Rate 0.6 V/µs
封裝 8-DIP (0.300 in, 7.62 mm pitch)
安裝類型 Through-hole
Packaging Tube
Product Description Dual operational amplifier
Architecture Two independent, high-gain, frequency-compensated operational amplifiers
Low Power Drain Supported
Input Common-Mode Reference Ground/VEE

LM2904VNG 8-dip (0.300 in, 7.62 mm pitch) 腳位配置指南

LM2904VNG(8-dip (0.300 in, 7.62 mm pitch) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

LM2904VNG 的 8-dip (0.300 in, 7.62 mm pitch) 封裝腳位圖

無詳細腳位定義資料: LM2904VNG.

請參閱 資料表 以查看完整腳位配置。

典型應用

LM2904VNG 適用於 6 應用s: Industrial Sensor Signal Conditioning, Power Supply Feedback Monitoring, Audio Preamplifier Stages, Communications Interface Conditioning, Current Monitoring and Control, Industrial Control Module.

🏭

Industrial Sensor Signal Conditioning

LM2904VNG fits industrial sensor interfaces that require two independent amplifier channels and a single- or split-supply operating arrangement. Its common-mode input range extends toward ground/VEE, which is useful when a sensor signal is referenced close to the lower rail. The 1 MHz gain-bandwidth product and 0.6 V/µs slew rate are appropriate for general-purpose conditioning of slowly varying or moderate-bandwidth sensor signals. The two channels can buffer or amplify a sensor path and a reference signal in the same module. Design the external feedback network around the closed-loop gain required by the sensor, and verify input and output headroom at the actual supply voltage.

⚡

Power Supply Feedback Monitoring

LM2904VNG can monitor and condition a power-supply feedback voltage where a general-purpose dual amplifier is sufficient. One channel may buffer a feedback divider while the second channel amplifies a related current-sense or error signal for an analog controller. Its 3 V to 32 V supply capability supports higher-voltage industrial rails than the 26 V TI LM2904 family member identified in the product records. The 1 MHz bandwidth provides useful response for many control loops, while the 0.6 V/µs slew rate should be checked against large-signal feedback steps. Use the exact onsemi output-swing and common-mode limits at the selected rail.

🎧

Audio Preamplifier Stages

LM2904VNG is usable in modest audio preamplifier and buffer stages where low-frequency gain and general-purpose operation are more important than wide-band audio performance. Two channels allow a stereo preamplifier to use a single package, with each amplifier configured through external feedback resistors and coupling capacitors. The 1 MHz gain-bandwidth product and 0.6 V/µs slew rate are sufficient for many spoken-audio and control-signal paths, but they will not match the speed of precision low-noise audio amplifiers. Check the input noise, output swing, and channel-to-channel behavior in the manufacturer datasheet before using it in high-fidelity equipment.

🌐

Communications Interface Conditioning

LM2904VNG can condition slow and moderate-bandwidth signals in communications interface boards that require dual amplification, broad supply-voltage tolerance, and through-hole assembly. One channel can buffer an incoming line-level signal while the other handles an outgoing control or level-shifted signal. The common-mode input range extending toward ground/VEE supports single-rail operation, while the 1 MHz gain-bandwidth product provides more bandwidth than many very-low-speed comparators. The 0.6 V/µs slew rate should be considered for pulse-shaped signals, and the circuit must provide appropriate input protection and filtering at the board interface.

📱

Current Monitoring and Control

LM2904VNG is suitable for low-side current-monitoring and control circuits when the shunt voltage remains inside the amplifier’s input common-mode range. One amplifier can amplify the differential voltage across a shunt while the other can buffer or condition the result for an ADC or comparator. The extended common-mode range toward ground is valuable for low-voltage shunt systems, and the dual package simplifies allocation of signal gain and output buffering. The 1 MHz bandwidth and 0.6 V/µs slew rate are adequate for many slow current-control loops. Confirm the shunt signal range, output swing, and settling requirements for the selected feedback network.

🏭

Industrial Control Module

LM2904VNG fits small industrial control modules that need two general-purpose analog channels on a through-hole board. A typical arrangement uses one channel to condition a feedback or sensor signal and the other to amplify a control output before it reaches a downstream driver. Single-supply operation reduces the number of required rails, while split-supply operation remains available when bipolar signals are present. The 8-pin PDIP package and tube packaging support conventional through-hole manufacturing. Designers should account for the 0.6 V/µs slew rate, verify the 3 V to 32 V operating envelope, and place suitable bypass capacitance close to the supply pins according to the onsemi layout guidance.

What is the operating voltage of LM2904VNG?
The LM2904VNG supports a 3 V to 32 V supply range according to the retrieved component specifications. It is designed for single-supply or split-supply operation, allowing either a positive-only rail or separate positive and negative rails. The manufacturer datasheet should be checked for the exact maximum supply and input common-mode limits before applying the device near its voltage ratings.
How many operational amplifiers are in the LM2904VNG?
The LM2904VNG contains two independent operational amplifiers in one 8-pin PDIP package. The retrieved product description identifies it as a standard general-purpose amplifier with two circuits. Each channel can be used separately for amplification, buffering, filtering, or signal conditioning, allowing a dual-stage analog circuit to be implemented with one package.
What is the gain-bandwidth product of LM2904VNG?
The LM2904VNG has a listed gain-bandwidth product of 1 MHz. This means the small-signal bandwidth depends on the selected closed-loop gain and the amplifier’s noise-gain behavior. The 1 MHz value is appropriate for general-purpose low-frequency signal conditioning rather than high-speed video or precision instrumentation applications.
What is the slew rate of LM2904VNG?
The listed slew rate for LM2904VNG is 0.6 V/µs. This limits how quickly the output can move through larger voltage changes and therefore affects large-signal response and pulse fidelity. The manufacturer datasheet provides the complete dynamic-response characteristics, including the test conditions used for the published value.
Can LM2904VNG operate from a single supply?
Yes. The LM2904VNG is designed for single-supply operation as well as split-supply operation. Its common-mode input range extends toward ground or VEE, which is useful in single-rail sensor interfaces, although the exact usable input and output swing must be checked against the manufacturer’s electrical characteristics for the chosen supply voltage.
What package does LM2904VNG use?
The LM2904VNG is supplied in an 8-pin PDIP package with a 0.300-inch, or 7.62 mm, lead pitch. It is a through-hole package and the retrieved description identifies the shipping format as tube. Use the manufacturer pinout and the physical package drawing when assigning PCB holes and connecting the two amplifier channels.
Where can I download the LM2904VNG datasheet PDF?
The LM2904VNG datasheet is available through the ON Semiconductor datasheet page identified in the product records. The retrieved document listing describes the part as a dual operational amplifier with single-supply and split-supply operation, low power drain, and a common-mode input range extending to ground/VEE. Use the onsemi datasheet for authoritative pinout and electrical details.
What is the pinout of LM2904VNG?
The LM2904VNG uses the standard 8-pin operational-amplifier pin arrangement for the LM2904 family: each channel has an inverting input, non-inverting input, output, and supply connection, with the two channels sharing the positive and negative supply pins. Confirm the exact numbered assignments against the manufacturer pin-description table before PCB routing or breadboard assembly.
Where can I buy LM2904VNG online?
Use the Request a Quote form on this page to request LM2904VNG availability, packaging, and a current quotation. The product is identified as an onsemi dual operational amplifier in an 8-pin PDIP package and is also listed by major component suppliers, but current stock and commercial terms can change. The quote form is the appropriate route for an exact MPN request.
What is the price of LM2904VNG?
Pricing for LM2904VNG depends on quantity, package form, and current market conditions. Request a current quotation through the Request a Quote form on this page using the exact MPN LM2904VNG. The structured listing does not present a qualifying current quantity-break table, so a specific commercial amount should not be inferred from historical catalog information.
What is the lead time for LM2904VNG?
The current lead time for LM2904VNG should be confirmed through the Request a Quote form on this page. Lead time can vary with manufacturer inventory, tube quantity, and manufacturing conditions, and the retrieved product records do not establish one universal delivery interval. Provide the required quantity and target delivery date in the quote request.
Is LM2904VNG in stock?
Current LM2904VNG inventory is not established by the product records for this page. Request a stock confirmation through the Request a Quote form on this page using the exact MPN and required tube quantity. The part is presented as an onsemi dual operational amplifier in a tube-packaged 8-pin PDIP configuration.
What can replace LM2904VNG?
A replacement should match the LM2904VNG’s 8-pin PDIP footprint, dual-amplifier channel arrangement, supply range, and required electrical performance. The LM2904 family and compatible 8-pin dual operational amplifiers are the appropriate starting point, but each candidate must be checked for pinout, common-mode range, output swing, and temperature requirements before substitution.
LM2904VNG vs LM2904V - which is better?
LM2904VNG is the onsemi 8-pin PDIP ordering designation, while LM2904V is the related family designation used by a manufacturer product record with a stated 30 V maximum supply and 700 kHz bandwidth. They are not automatically interchangeable without checking manufacturer-specific electrical limits, package variants, temperature grade, and exact ordering information. For a PCB replacement, the package and pinout are decisive.
Is LM2904VNG suitable for industrial sensor interfaces?
LM2904VNG can be appropriate for many industrial sensor interfaces because it supports single- or split-supply operation, has a common-mode input range extending toward ground or VEE, and provides two amplifier channels. The design must still account for input and output headroom, supply noise, protection, operating temperature, and the 0.6 V/µs slew rate. Verify the exact datasheet limits for the production environment.

工程參考資料,適用於 LM2904VNG — 比較、設計指引及合規資訊。

選型指南

Choose LM2904VNG when the design needs two general-purpose amplifier channels, a through-hole 8-pin PDIP footprint, and operation from a single or split supply. Its listed 3 V to 32 V range and 1 MHz gain-bandwidth product are useful for industrial signal conditioning, power-supply feedback, current monitoring, and modest audio or communications interfaces. Choose LM2904NG or LM2904P when an onsemi ordering option is preferred, but verify the exact suffix-specific electrical table. Consider LM2904B when a newer family option is available and its upgraded characteristics are required. The TI LM2904 is a reasonable comparison part, but its 26 V maximum and 700 kHz bandwidth are lower than the listed LM2904VNG values. For every candidate, confirm the 8-pin PDIP pinout, input common-mode range, output swing, temperature grade, and supply limits before approving a drop-in substitution.

與替代品比較

參數 本產品 LM2904NG LM2904P LM2904V LM2904B LM2904
Package 8-DIP (0.300 in, 7.62 mm pitch) 8-DIP (0.300 in, 7.62 mm pitch) 8-DIP (0.300 in, 7.62 mm pitch) 8-DIP (0.300 in, 7.62 mm pitch) 8-DIP (0.300 in, 7.62 mm pitch) 8-DIP (0.300 in, 7.62 mm pitch)
Brand onsemi onsemi onsemi onsemi onsemi Texas Instruments
Number of Amplifiers 2 2 2 2 2 2

主要差異化特點

  • Higher listed bandwidth than the 700 kHz TI LM2904 comparison part (對比LM2904)
  • Broader stated maximum supply than the 26 V TI LM2904 (對比LM2904)
  • Single-package dual-channel implementation (對比Single-amplifier alternatives)

設計說明

The LM2904VNG supports single-supply and split-supply operation, but the usable input and output ranges are narrower than the full 3 V to 32 V supply envelope. Select the rail so that the signal remains inside the manufacturer input common-mode and output swing limits, especially when the sensor output approaches ground. Add local bypass capacitance at the supply pins and use separate routing for sensitive input and output nodes.

Keep the feedback resistors and compensation-related components close to the appropriate amplifier pins, and route each inverting-input node with a short, low-leakage path. Because the device is an 8-pin PDIP, verify the physical hole pattern against the 0.300-inch, 7.62 mm pitch package drawing before committing the PCB footprint. Confirm the numbered pin assignments from the onsemi pin-description table.

Do not treat the 3 V to 32 V supply range as permission to use any input voltage within that range. The input common-mode range and output swing must also be respected. Likewise, the 1 MHz gain-bandwidth product and 0.6 V/µs slew rate limit closed-loop bandwidth and large-signal response. Use the exact LM2904VNG electrical table when designing high-gain, fast-signal, or precision applications.

The LM2904 family uses frequency compensation for general-purpose closed-loop operation, but high source impedance can add noise and reduce practical bandwidth. At sensor inputs, use the lowest practical source impedance, keep input capacitance low, and separate the signal ground path from high-current return paths. Add filtering only after accounting for the amplifier noise and the 1 MHz bandwidth.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The retrieved component records identify the manufacturer, package, amplifier type, channel count, supply capability, bandwidth, slew rate, and tube packaging. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established and therefore remain unknown.

資料驗證日期: 2026-11-17 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

LM2904VNG datasheet LM2904VNG pinout LM2904VNG datasheet pdf LM2904VNG equivalent LM2904VNG replacement LM2904VNG footprint LM2904VNG application circuit LM2904VNG price onsemi LM2904VNG LM2904VNG vs LM2904 8-DIP dual operational amplifier LM2904VNG single supply operation

相關元件與詞彙

onsemi LM2904VNG LM2904NG LM2904P LM2904V LM2904B LM2904 Texas Instruments operational amplifier dual amplifier analog integrated circuit signal conditioning single-supply operation split-supply operation common-mode input voltage range gain-bandwidth product slew rate frequency compensation 8-pin PDIP through-hole package tube packaging industrial control power-supply feedback current monitoring
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情