Analog Devices

MAX232AEWE+T - +5V 2/2 RS-232 Transceiver | Analog Devices

MPN: MAX232AEWE+T ✓ 啟用中
+5 V Vdss 16-SOIC Package
MOQ: 1 |

MAX232AEWE+T 概覽

The Analog Devices MAX232AEWE+T is a +5 V-powered, 2/2 RS-232 transceiver in a 16-SOIC package. It combines two RS-232 drivers and two receivers, supports full-duplex serial communication, and is designed for EIA/TIA-232E and V.28/V.24 interfaces. The MAX232AEWE+T variant belongs to the MAX232A family, which uses a higher slew rate for improved interface performance.

An RS-232 transceiver is an interface IC that translates between single-ended, bipolar RS-232 signals and logic-level digital signals. The receiver converts an RS-232 input into a CMOS-compatible logic level, while the driver converts a logic-level input into an RS-232 output. In the broader hierarchy, the MAX232AEWE+T is an interface transceiver, a communication IC, and a semiconductor designed to bridge a host UART and an RS-232 physical layer.

The device provides two driver channels and two receiver channels in one package. Its +5 V supply arrangement simplifies use in conventional +5 V embedded systems, while integrated level translation eliminates separate RS-232 line drivers and receivers. The MAX232A designation also identifies a higher-slew-rate implementation intended for RS-232 applications requiring improved transition behavior compared with the base MAX232 family.

The MAX232AEWE+T is suitable for EIA/TIA-232E and V.28/V.24 communication interfaces. Its 16-SOIC package permits conventional surface-mount assembly and provides enough pins for two transmit channels, two receive channels, supply connections, ground, and the internal charge-pump components. Because RS-232 is a single-ended interface, the supply and signal-return ground path must be managed carefully in systems with long cables or significant ground-potential differences.

Typical applications include industrial serial consoles, point-of-sale equipment, data-acquisition systems, embedded control boards, and legacy peripheral connections. It can connect a UART-equipped microcontroller, DSP, or field-programmable logic device to an RS-232 port while limiting the design to one interface IC rather than separate line-driver and receiver packages.

PCB implementation should follow the charge-pump capacitor requirements and layout guidance in the manufacturer datasheet. Place the required capacitors close to their associated pins, maintain a continuous ground reference, and route the RS-232 cable-side traces away from sensitive digital and analog nets. Verify the complete interface against the intended baud rate, cable length, and grounding topology before production release.

This product page combines the MAX232AEWE+T family specifications with same-package alternatives, application guidance, and design notes intended to help engineers select and implement the interface efficiently.

直接替換替代品,適用於 MAX232AEWE+T — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MAX232AEWE+T (相同外形與佔位) — 差異在於 Package, Product Type, Interface Standard, Maximum Data Rate, Supply Voltage.

Analog Devices
Package: SOIC-16W, 16 pins
Product Type: Dual RS-232 line transceiver
Interface Standard: EIA/TIA-232E, V.28 and V.24
比較對象 MAX232AEWE+T →
Texas Instruments
Package: 16-pin SOIC (DW), 0.295 inch / 7.50 mm width
Product Type: Dual RS-232 driver/receiver
Maximum Data Rate: 250 kbps
比較對象 MAX232AEWE+T →
Texas Instruments
Package: 16-pin SOIC (DW)
Product Type: Dual RS-232 driver/receiver
Interface Standard: RS-232
比較對象 MAX232AEWE+T →
Maxim Integrated
Package: 16-pin wide SOIC
Product Type: RS-232 transceiver interface IC
Interface Standard: EIA/TIA-232E
比較對象 MAX232AEWE+T →

MAX232EWE+T

✅ 直接替換 ⚠️ 規格未經驗證
Maxim Integrated
📦 16-SOIC
RS-232 transceiver interface IC · 2 drivers · 2 receivers · 4.5 V to 5.5 V · 120 kbps · EIA/TIA-232E · CCITT V.28 and V.24 · +5 V

聯絡詢價

查看資料表 →

MAX232EIDWR

✅ 直接替換 ⚠️ 規格未經驗證
Texas Instruments
📦 16-SOIC
Dual RS-232 driver/receiver · 2 channels · 2 channels · 250 kbps · 5 V · ±9 V · ±30 V · 1.3 V

聯絡詢價

查看資料表 →

MAX232ECDWR

✅ 直接替換 ⚠️ 規格未經驗證
Texas Instruments
📦 16-SOIC
Dual RS-232 driver/receiver · 2 · 2 · 250 kbps · 4.5 V to 5.5 V · Single 5 V supply · IEC 61000-4-2 · 16-pin SOIC (DW), 0.295 inch / 7.50 mm width

聯絡詢價

查看資料表 →

MAX232EEWE+T

✅ 直接替換 ⚠️ 規格未經驗證
Analog Devices
📦 16-SOIC
RS-232 transceiver (2 drivers and 2 receivers) · 2 channels · 2 channels · Full duplex · 5 V · 120 kbps · ±15 kV HBM · EIA/TIA-232E

聯絡詢價

查看資料表 →

MAX232AEWE+T 規格

Product Type RS-232 transceiver
Driver and Receiver Configuration 2/2 transceiver
供應電壓 +5 V
Number of Drivers 2 channels
Number of Receivers 2 channels
Interface Standard EIA/TIA-232E and V.28/V.24
封裝 16-SOIC
安裝類型 Surface mount
Slew Rate Higher-slew-rate MAX232A implementation
Manufacturer Orderable Packaging Tape and reel

MAX232AEWE+T 16-soic 腳位配置指南

MAX232AEWE+T(16-soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

MAX232AEWE+T 的 16-soic 封裝腳位圖

無詳細腳位定義資料: MAX232AEWE+T.

請參閱 資料表 以查看完整腳位配置。

典型應用

MAX232AEWE+T 適用於 6 應用s: Industrial Serial Console, Point-of-Sale Terminal Interface, Data-Acquisition Equipment, Embedded Control Board, Legacy Peripheral Connectivity, Instrumentation Control Link.

🏭

Industrial Serial Console

The MAX232AEWE+T fits an industrial controller that needs to expose a UART through an RS-232 service or console connector. Its 2/2 organization allows one transmit and one receive path for console traffic while leaving a second driver-receiver pair available for a second RS-232 function. The +5 V supply matches a conventional embedded control board, and the 16-SOIC footprint simplifies assembly alongside the host processor. Because a long cable can introduce ground-potential differences and electrostatic discharge, retain the transceiver close to the connector and add protection appropriate to the installation. Confirm the required temperature grade, baud rate, logic thresholds, and external capacitor network against the Analog Devices MAX232A data sheet.

🏭

Point-of-Sale Terminal Interface

A point-of-sale terminal can use the MAX232AEWE+T to connect a logic-level UART to a legacy RS-232 peripheral such as a reader, printer interface, or service connector. The two-driver and two-receiver arrangement supports full-duplex communication and permits two RS-232 ports when the board requires more than one cable connection. Running from +5 V avoids a separate translator supply rail, while integrated level conversion reduces the number of discrete interface components. The MAX232A family's higher slew rate is relevant when the selected interface emphasizes transition performance. Place the IC near the connector, route driver outputs as a separate group, and use a continuous board ground as the signal reference.

📊

Data-Acquisition Equipment

The MAX232AEWE+T is appropriate for data-acquisition equipment that must communicate with a host computer through RS-232. A controller or FPGA can drive the transmit input while receiving commands or measurements through a receiver channel, eliminating the need for separate RS-232 line devices. The 2/2 channel count can support a control link and a separate data or status link. The +5 V supply is convenient for legacy acquisition hardware, and the 16-SOIC package provides a conventional surface-mount footprint. Keep analog input circuitry and sensitive sensor references away from the RS-232 outputs, and use the manufacturer's recommended capacitor values and grounding arrangement to preserve signal integrity.

🧩

Embedded Control Board

The MAX232AEWE+T adds a conventional RS-232 port to an embedded control board built around a microcontroller, DSP, or programmable logic device. The processor UART connects directly to the transceiver's logic-side signals, while the driver and receiver outputs connect to the external RS-232 connector. Its +5 V operation supports established embedded power architectures, and the 16-SOIC package allows assembly without a specialized fine-pitch footprint. Design the connector-side protection network around the cable environment, and confirm the logic-level input thresholds and output drive capability for the selected host device. The manufacturer data sheet's charge-pump capacitor placement and application circuit should be followed closely.

🔧

Legacy Peripheral Connectivity

The MAX232AEWE+T provides a practical bridge to legacy RS-232 peripherals when a newer controller offers only UART or CMOS logic I/O. It converts the host's logic-level TX and RX signals to and from the bipolar, single-ended RS-232 interface, allowing equipment such as test instruments, service tools, and older industrial peripherals to remain in service. The two-channel transmitter and receiver arrangement can support more than one cable or leave spare channels for future expansion. Use the +5 V rail specified for the interface and validate the peripheral's connector wiring and signal polarity. Cable-side protection and a defined ground-reference strategy remain necessary for reliable operation over long or noisy interconnects.

📟

Instrumentation Control Link

The MAX232AEWE+T can serve as the RS-232 control-link interface in laboratory or field instrumentation. A microcontroller may use one transmitter and one receiver for commands, status, or measurement data, while the second channel supports another instrument function. The +5 V supply and 16-SOIC package are compatible with established instrument electronics, and the MAX232A family's higher slew rate can support improved RS-232 transition behavior. Care is required because both sides of an RS-232 link may have different ground potentials. Use a solid common reference within the equipment, isolate the cable if ground loops are possible, and verify the maximum supported data rate and cable length from the manufacturer documentation.

What is the MAX232AEWE+T?
The MAX232AEWE+T is a +5 V-powered, 2/2 RS-232 transceiver from Analog Devices, combining two drivers and two receivers in a 16-SOIC package. According to the Analog Devices MAX232A product page and data sheet, it is intended for EIA/TIA-232E and V.28/V.24 communications interfaces. The MAX232A family provides a higher slew rate than the base MAX232 family, while the +T ordering suffix identifies the tape-and-reel shipping format.
How many RS-232 drivers and receivers does the MAX232AEWE+T have?
The MAX232AEWE+T provides two RS-232 drivers and two receivers, matching the listed 2/2 transceiver configuration. Each driver accepts a logic-level transmit input and produces an RS-232-level output, while each receiver converts an RS-232-level input into a logic-level output. This combination supports two transmit and two receive channels in one 16-SOIC interface IC rather than requiring separate driver and receiver packages.
Where can I download the MAX232AEWE+T datasheet PDF?
Download the MAX232A family data sheet through the official Analog Devices MAX232A product page at https://www.analog.com/en/products/max232a.html. The page identifies MAX232AEWE+T as a +5 V-powered, multichannel RS-232 driver and receiver, and its documentation includes ordering information covering package and temperature options. Use the manufacturer data sheet as the controlling document for pin functions, capacitor values, electrical limits, and application-circuit details.
Where can I find the MAX232AEWE+T pinout?
The MAX232AEWE+T pinout is published in the MAX232A manufacturer data sheet and corresponds to its 16-SOIC package. The package contains two driver inputs, two driver outputs, two receiver inputs, two receiver outputs, power, ground, and charge-pump capacitor connections. Because the product page does not reproduce a complete numbered pin table, use the pin-description table and package drawing in the Analog Devices data sheet before assigning PCB nets.
What is the supply voltage of the MAX232AEWE+T?
The MAX232AEWE+T operates from a +5 V supply. Analog Devices describes the device as a +5 V-powered, multichannel RS-232 driver and receiver, which makes it suitable for systems whose UART and surrounding digital logic operate from the same conventional supply rail. The relevant bypass and charge-pump capacitor requirements should be implemented exactly as specified in the manufacturer data sheet.
Can the MAX232AEWE+T connect a microcontroller UART to an RS-232 port?
Yes, the MAX232AEWE+T is suitable for connecting a logic-level UART to a conventional RS-232 port. The microcontroller TX signal connects to a driver input, an RS-232 receiver output connects to the microcontroller RX signal, and the two ground-reference paths complete the interface. The device provides two transmit and two receive channels, so it can also support two independent RS-232 links when the corresponding lines are routed separately.
What is the best drop-in replacement for MAX232AEWE+T?
The closest same-brand drop-in choices are MAX232EWE+T, MAX232EIDWR, MAX232ECDWR, and MAX232EEWE+, subject to temperature, package, and electrical-limit checks. Each provides the same +5 V, 2/2 RS-232 transceiver function in a 16-SOIC format. The exact replacement must match the required temperature grade and suffix, and the manufacturer ordering information and data sheets should be compared before changing an approved design.
Are MAX232EWE+T and MAX232AEWE+T interchangeable?
MAX232EWE+T and MAX232AEWE+T share the +5 V, 2/2 RS-232 interface function and a 16-SOIC package, but MAX232AEWE+T is the MAX232A higher-slew-rate family. They are therefore close alternatives rather than automatically identical devices. Confirm driver and receiver limits, temperature grade, capacitance requirements, and the completed application circuit in the corresponding Analog Devices data sheets before substituting one for the other.
When should I choose MAX232AEWE+T instead of MAX232EWE+T?
Choose MAX232AEWE+T when the design benefits from the MAX232A family's higher slew rate while retaining a +5 V, 2/2 RS-232 interface. Choose MAX232EWE+T when the base MAX232 family's switching characteristics meet the interface requirements and the approved design is already standardized around that variant. Both use the same 16-SOIC footprint, so final selection should emphasize electrical performance, qualification, and lifecycle requirements rather than PCB changes.
Is MAX232AEWE+T suitable for industrial serial-console applications?
The MAX232AEWE+T is suitable for many industrial serial-console designs because it combines two +5 V RS-232 channels with a 16-SOIC package. The exact operating-temperature grade must match the enclosure environment, and the long-cable ground-potential and ESD requirements must be addressed outside the IC. Use the manufacturer application guidance for bypassing, charge-pump capacitors, and board layout.
How should the MAX232AEWE+T charge-pump capacitors be placed?
Place the required charge-pump capacitors close to their specified pins and provide a short, low-inductance return path to the device ground. The exact capacitor values, tolerances, and applicable layout diagrams must be taken from the Analog Devices MAX232A data sheet. Avoid placing sensitive traces beneath the capacitor network, and keep the RS-232 driver outputs separated from sensitive receiver inputs to reduce coupling.
Does the MAX232AEWE+T need external protection for RS-232 cables?
The MAX232AEWE+T performs RS-232 line driving and level translation, but it does not replace external surge and ESD protection for cables that leave an enclosure. Add suitable protection at the connector when the application requires it, and connect protection-device ground returns carefully to avoid injecting noise into the transceiver. The required protection level depends on cable length, environment, and applicable system requirements.
What are the key specifications of MAX232AEWE+T that engineers should know?
The key MAX232AEWE+T specifications are a +5 V supply, two RS-232 drivers, two receivers, EIA/TIA-232E and V.28/V.24 interface support, a higher-slew-rate MAX232A implementation, and a 16-SOIC package. Analog Devices presents the component as a production part within the MAX232A family. Its operating-temperature limits, maximum data rate, supply current, and complete electrical characteristics must be taken from the family data sheet for the selected ordering suffix.
Where can I buy MAX232AEWE+T and what is its lead time?
Use the Request a Quote form on this page to request MAX232AEWE+T pricing, current stock, quantity breaks, and lead time for the exact +T ordering suffix. The available distributor listings confirm that the part is offered in a 16-SOIC tape-and-reel format, but the displayed search results do not establish a fixed lead time. A formal quote provides the current commercial answer for the required quantity and shipment destination.
What is the best cross-brand equivalent for MAX232AEWE+T?
No cross-brand part should be treated as a confirmed drop-in replacement for the MAX232AEWE+T without a separate manufacturer-level review. Cross-reference listings identify similar RS-232 transceivers, but similarity alone does not prove that a different manufacturer's 16-SOIC pinout, charge-pump capacitor arrangement, logic thresholds, temperature range, and electrical limits are interchangeable. Compare the original and candidate manufacturer data sheets before approving a cross-brand substitution.

工程參考資料,適用於 MAX232AEWE+T — 比較、設計指引及合規資訊。

選型指南

Choose MAX232AEWE+T when the design requires a +5 V, two-driver and two-receiver RS-232 interface and benefits from the MAX232A family's higher slew rate. MAX232EWE+T is the closest base-family alternative when the higher-slew-rate distinction is unnecessary and the design is already qualified around MAX232E. MAX232EIDWR or MAX232ECDWR can be considered when their specific ordering codes provide a better temperature or assembly match, but confirm those electrical details in the manufacturer ordering table. MAX232EEWE+T is another same-package family option whose suffix determines its exact configuration. For any replacement, verify pin functions, charge-pump capacitor values, temperature limits, logic thresholds, and maximum data rate. Cross-brand products may perform a similar RS-232 function, but they should be approved only after a direct comparison of their manufacturer data sheets and PCB footprints.

與替代品比較

參數 本產品 MAX232EWE+T MAX232EIDWR MAX232ECDWR MAX232EEWE+T
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Driver and Receiver Configuration 2/2 transceiver 2/2 transceiver 2/2 transceiver 2/2 transceiver 2/2 transceiver
Supply Voltage +5 V +5 V +5 V +5 V +5 V
Interface Support EIA/TIA-232E and V.28/V.24 EIA/TIA-232E and V.28/V.24 EIA/TIA-232E and V.28/V.24 EIA/TIA-232E and V.28/V.24 EIA/TIA-232E and V.28/V.24
Slew-Rate Family MAX232A higher-slew-rate implementation Base MAX232 family Base MAX232 family Base MAX232 family Base MAX232 family
Charge-Pump Capacitor Requirement External capacitors required; values in manufacturer data sheet External capacitors required; values in manufacturer data sheet External capacitors required; values in manufacturer data sheet External capacitors required; values in manufacturer data sheet External capacitors required; values in manufacturer data sheet

主要差異化特點

  • Higher-slew-rate MAX232A family implementation (對比MAX232EWE+T)
  • Two complete RS-232 channels in one 16-SOIC package (對比MAX232EIDWR)
  • Supports standard RS-232 communication standards (對比MAX232ECDWR)

設計說明

Place the MAX232AEWE+T charge-pump capacitors directly beside their associated pins and keep each capacitor's return path short and continuous. Follow the manufacturer data-sheet capacitor values and layout drawing rather than substituting generic high-capacitance parts. Keep the RS-232 driver outputs away from receiver inputs and sensitive logic because the cable-side transitions are much larger than the internal logic levels.

Route each RS-232 driver output as a short, direct path toward its connector and preserve a continuous ground reference beneath the interface area. Avoid sharing narrow ground-current paths between the transceiver and switching regulators. If the board connects to a remote system with a potentially different ground potential, evaluate isolation or a carefully engineered common-reference design to prevent excessive current through the RS-232 interface.

Do not treat the MAX232AEWE+T as a surge-protection device. Add connector-side protection when cables are exposed to electrostatic discharge or industrial transients, and select protection parts that do not distort normal RS-232 signals. Also verify the exact ordering suffix, temperature grade, logic thresholds, and capacitor configuration before substitution; identical package dimensions alone do not establish drop-in compatibility.

Decouple the +5 V supply locally with the capacitance and placement specified by Analog Devices. The charge-pump network can produce supply ripple, so the bypass path should be independent of connector return currents and noisy switching nodes. Confirm the power-supply capacity for the IC and surrounding interface circuitry under startup and full-load conditions, particularly when the board also supports +3.3 V logic through level translation.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is stated in the product listings. AEC-Q100 is not applicable because this is a general-purpose RS-232 interface IC rather than an automotive-qualified device.

相關搜尋

MAX232AEWE+T datasheet MAX232AEWE+T pinout MAX232AEWE+T datasheet pdf MAX232AEWE+T equivalent MAX232AEWE+T replacement MAX232AEWE+T vs MAX232EWE+T MAX232AEWE+T 16-SOIC pinout MAX232AEWE+T application circuit Analog Devices MAX232AEWE+T MAX232AEWE+T price MAX232AEWE+T stock MAX232AEWE+T +5V RS-232

相關元件與詞彙

Analog Devices MAX232AEWE+T MAX232A MAX232EWE+T MAX232EIDWR MAX232ECDWR MAX232EEWE+T RS-232 transceiver RS-232 driver RS-232 receiver interface IC communication IC semiconductor UART CMOS logic EIA/TIA-232E V.28 V.24 higher slew rate 16-SOIC surface-mount technology charge-pump capacitor RS-232 level translation industrial automation data acquisition
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情