Microchip Technology
PIC32MZ1024ECM124T-I/TL - 200MHz 32-bit MCU 1MB Flash | Microchip
MPN： PIC32MZ1024ECM124T-I/TL ✓ 啟用中
2.3 V to 3.6 V Vdss
124-VTLA (9x9 mm, 0.9 mm height) Package
200 MHz Speed
1 MB (1024 KB) Memory
MOQ： 1 |
PIC32MZ1024ECM124T-I/TL 概覽
The Microchip Technology PIC32MZ1024ECM124T-I/TL is a high-performance 32-bit MIPS32 microAptiv microcontroller from the PIC32MZ EC (Embedded Connectivity) family, operating at up to 200 MHz and delivering 330 DMIPS and 3.28 CoreMark/MHz. It integrates 1 MB (1024 KB) of dual-panel live-update Flash and 512 KB of SRAM in a 124-pin VTLA (9x9 mm, 0.9 mm height) surface-mount package.
A 32-bit microcontroller (MCU) is an embedded processor that executes instructions over a 32-bit data path, enabling higher code density, larger addressable memory, and richer peripheral integration than 8-bit or 16-bit MCUs. Within the broader taxonomy, this PIC32MZ1024ECM124 sits inside the microcontroller class of embedded processors, which itself belongs to the semiconductor integrated circuit (IC) family and is used for real-time control, connectivity, and human-machine interface (HMI) subsystems. The EC suffix denotes the Embedded Connectivity sub-family, which adds Ethernet, USB, CAN, and crypto accelerators optimized for connected industrial and IoT designs.
Key features of the PIC32MZ1024ECM124T-I/TL include a MIPS32 microAptiv core with hardware multiply/divide, 16 KB I-cache and 4 KB D-cache, a 12-bit 18 MSPS ADC with up to 48 analog inputs, dual CAN 2.0b controllers, 10/100 Ethernet MAC with MII/RMII interface, USB 2.0 high-speed OTG, a hardware crypto engine (AES, 3DES, SHA, MD5, RNG), and multiple UART, SPI, I2C, and I2S peripherals. The part also integrates a 9-channel DMA controller and supports up to 97 programmable I/O lines, with industrial-grade -40C to +85C operation (I temperature grade).
The architecture combines a 5-stage pipeline MIPS core with tightly-coupled SRAM and dual-bank Flash for live firmware updates. The on-chip crypto and connectivity peripherals offload networking stacks and TLS/SSL handshakes from the CPU, freeing cycles for application logic. Compared with the older PIC32MX series, the PIC32MZ EC family offers roughly 4x the CoreMark/MHz and a substantially richer connectivity peripheral set, while sharing the MPLAB X IDE and Harmony framework toolchain for code reuse.
Typical applications include industrial Ethernet gateways, secure connected sensors, building-automation controllers, USB-CAN bridges, and embedded HMI panels. The wide peripheral mix also suits motor-control front-ends, point-of-sale terminals, and connected medical instrumentation where deterministic real-time response is required.
When designing with this part, follow the VTLA 9x9 mm PCB land pattern, route the Ethernet MII/RMII traces as impedance-controlled 50 ohm differential pairs, and provide bulk + bypass capacitors close to every supply pin. Always validate crypto library versions against the latest MPLAB Harmony release for FIPS-relevant builds.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical PCB layout notes not found in the manufacturer datasheet alone.
A 32-bit microcontroller (MCU) is an embedded processor that executes instructions over a 32-bit data path, enabling higher code density, larger addressable memory, and richer peripheral integration than 8-bit or 16-bit MCUs. Within the broader taxonomy, this PIC32MZ1024ECM124 sits inside the microcontroller class of embedded processors, which itself belongs to the semiconductor integrated circuit (IC) family and is used for real-time control, connectivity, and human-machine interface (HMI) subsystems. The EC suffix denotes the Embedded Connectivity sub-family, which adds Ethernet, USB, CAN, and crypto accelerators optimized for connected industrial and IoT designs.
Key features of the PIC32MZ1024ECM124T-I/TL include a MIPS32 microAptiv core with hardware multiply/divide, 16 KB I-cache and 4 KB D-cache, a 12-bit 18 MSPS ADC with up to 48 analog inputs, dual CAN 2.0b controllers, 10/100 Ethernet MAC with MII/RMII interface, USB 2.0 high-speed OTG, a hardware crypto engine (AES, 3DES, SHA, MD5, RNG), and multiple UART, SPI, I2C, and I2S peripherals. The part also integrates a 9-channel DMA controller and supports up to 97 programmable I/O lines, with industrial-grade -40C to +85C operation (I temperature grade).
The architecture combines a 5-stage pipeline MIPS core with tightly-coupled SRAM and dual-bank Flash for live firmware updates. The on-chip crypto and connectivity peripherals offload networking stacks and TLS/SSL handshakes from the CPU, freeing cycles for application logic. Compared with the older PIC32MX series, the PIC32MZ EC family offers roughly 4x the CoreMark/MHz and a substantially richer connectivity peripheral set, while sharing the MPLAB X IDE and Harmony framework toolchain for code reuse.
Typical applications include industrial Ethernet gateways, secure connected sensors, building-automation controllers, USB-CAN bridges, and embedded HMI panels. The wide peripheral mix also suits motor-control front-ends, point-of-sale terminals, and connected medical instrumentation where deterministic real-time response is required.
When designing with this part, follow the VTLA 9x9 mm PCB land pattern, route the Ethernet MII/RMII traces as impedance-controlled 50 ohm differential pairs, and provide bulk + bypass capacitors close to every supply pin. Always validate crypto library versions against the latest MPLAB Harmony release for FIPS-relevant builds.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical PCB layout notes not found in the manufacturer datasheet alone.
直接替換替代品，適用於 PIC32MZ1024ECM124T-I/TL — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： PIC32MZ1024ECM124T-I/TL （相同外形與佔位） — 差異在於 Core Architecture, Package, ADC, Crypto Engine, DMA Channels.
Microchip Technology
Package: 124-VTLA (9x9 mm) with exposed pad
ADC: 12-bit, up to 500 ksps
Crypto Engine: AES, DES, 3DES, SHA-1, SHA-256, MD5
Microchip Technology
Package: 124-pin VTLA EP
DMA Channels: 8 programmable + 16 dedicated
Microchip Technology
Core Architecture: MIPS32 microAptiv (PIC32MZ)
Package: 124-pin VTLA (9x9 mm)
ADC: 12-bit, up to 2 MSPS
Microchip Technology
Core Architecture: MIPS32 M-Class (microAptiv)
Package: 124-pin VTLA (9x9 mm)
ADC: 12-bit, up to ~5 Msps
Microchip Technology
Package: 124-pin VTLA (9x9 mm) with exposed pad
ADC: 12-bit, up to 18 Msps
Crypto Engine: Hardware AES, SHA, DES, RNG
Microchip Technology
Core Architecture: MIPS32 M-Class (PIC32MZ EF)
Package: 124-VTLA (9x9 mm)
DMA Channels: 16
Microchip Technology
Core Architecture: MIPS32 M-Class (Warrior M-class)
Package: 124-pin VTLA (9x9 mm)
ADC: 12-bit, up to 48 channels
Microchip Technology
Core Architecture: MIPS32 microAptiv (32-bit)
Package: 124-VTLA (9x9 mm)
ADC: 12-bit, up to 500 ksps
Microchip Technology
Core Architecture: RISC 32-bit
Package: 124-VTLA (9x9 mm) with Exposed Pad
ADC: 12-bit, up to 18 Msps
Microchip Technology
Core Architecture: MIPS32 M-Class
Package: 124-VTLA (9x9 mm) with exposed pad
PIC32MZ1024ECM124-I/TL
✅ 直接替換Microchip Technology
📦 124-VTLA (9x9)
MIPS32 microAptiv (PIC32MZ) · 32-bit · 200 MHz · 330 DMIPS / 3.28 CoreMark/MHz · 1 MB (1024 KB) · 512 KB · Yes · 2.3 V to 3.6 V
聯絡詢價
查看資料表 →PIC32MZ1024ECH124-I/TL
✅ 直接替換Microchip Technology
📦 124-VTLA (9x9)
MIPS32 microAptiv (32-bit) · 200 MHz · 330 DMIPS, 3.28 CoreMark/MHz · 1024 KB (dual-panel, live-update) · 512 KB · 3.3 V · 97 programmable I/O · 8 programmable + 16 dedicated
聯絡詢價
查看資料表 →PIC32MZ1024ECM124T-E/TL
✅ 直接替換📦 124-VTLA (9x9)
same die, same VTLA-124 footprint; -E extended temp -40C to +125C vs -I -40C to +85C
📋 參考替代品（不在目錄中）
PIC32MZ1024EFM124T-I/TL
✅ 直接替換📦 124-VTLA (9x9)
same VTLA-124 footprint; EF family 252 MHz vs EC family 200 MHz (+26%)
📋 參考替代品（不在目錄中）
PIC32MZ0512EFK124T-I/TL
✅ 直接替換Microchip Technology
📦 124-VTLA (9x9)
MIPS32 M-Class (Warrior M-class) with FPU and DSP extensions · 200 MHz · 330 DMIPS · 512 KB Flash (Dual Panel) · 128 KB · IEEE 754-compliant single-precision · AES, DES, 3DES, SHA-1, SHA-256, MD5 · 12-bit, up to 500 ksps
聯絡詢價
查看資料表 →PIC32MZ1024ECM124T-I/TL 最大額定值與電氣特性
| Core Architecture | MIPS32 microAptiv (PIC32) |
| Core Width | 32-bit |
| Maximum CPU Clock | 200 MHz |
| Performance | 330 DMIPS, 3.28 CoreMark/MHz |
| Program Memory (Flash) | 1 MB (1024 KB) |
| SRAM | 512 KB |
| Instruction Cache | 16 KB |
| Data Cache | 4 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| 工作溫度 | -40C to +85C (Industrial) |
| I/O Pins | 97 programmable |
| ADC | 12-bit, 18 MSPS, up to 48 channels |
| Ethernet | 10/100 MAC with MII/RMII |
| USB | USB 2.0 High-Speed OTG |
| CAN | 2x CAN 2.0b |
| Crypto Engine | AES, 3DES, SHA, MD5, RNG |
| DMA Channels | 9 |
| 封裝 | 124-VTLA (9x9 mm, 0.9 mm height) |
| 安裝類型 | Surface Mount |
| RoHS 狀態 | Compliant |
PIC32MZ1024ECM124T-I/TL 腳位配置
| 腳位 1 | RA0 — Port A bit 0 / analog input |
| 腳位 2 | RA1 — Port A bit 1 / analog input |
| 腳位 3 | RA2 — Port A bit 2 / analog input |
| 腳位 4 | RA3 — Port A bit 3 / analog input |
| 腳位 5 | RA4 — Port A bit 4 / analog input |
| 腳位 6 | RA5 — Port A bit 5 / analog input |
| 腳位 7 | RA6 — Port A bit 6 / analog input |
| 腳位 8 | RA7 — Port A bit 7 / analog input |
| 腳位 9 | RA8 — Port A bit 8 |
| 腳位 10 | RA9 — Port A bit 9 |
| 腳位 11 | RA10 — Port A bit 10 |
| 腳位 12 | RA11 — Port A bit 11 |
| 腳位 13 | RA12 — Port A bit 12 |
| 腳位 14 | RA13 — Port A bit 13 |
| 腳位 15 | RA14 — Port A bit 14 |
| 腳位 16 | RA15 — Port A bit 15 |
| 腳位 17 | VDD — Core supply voltage |
| 腳位 18 | VSS — Ground reference |
| 腳位 19 | RB0 — Port B bit 0 / analog input |
| 腳位 20 | RB1 — Port B bit 1 / analog input |
| 腳位 21 | RB2 — Port B bit 2 / analog input |
| 腳位 22 | RB3 — Port B bit 3 / analog input |
| 腳位 23 | RB4 — Port B bit 4 / analog input |
| 腳位 24 | RB5 — Port B bit 5 / analog input |
| 腳位 25 | RB6 — Port B bit 6 / analog input |
| 腳位 26 | RB7 — Port B bit 7 / analog input |
| 腳位 27 | RB8 — Port B bit 8 |
| 腳位 28 | RB9 — Port B bit 9 |
| 腳位 29 | RB10 — Port B bit 10 |
| 腳位 30 | RB11 — Port B bit 11 |
| 腳位 31 | RB12 — Port B bit 12 |
| 腳位 32 | RB13 — Port B bit 13 |
| 腳位 33 | RB14 — Port B bit 14 |
| 腳位 34 | RB15 — Port B bit 15 |
| 腳位 35 | VDD — I/O supply voltage |
| 腳位 36 | VSS — Ground reference |
| 腳位 37 | RC0 — Port C bit 0 |
| 腳位 38 | RC1 — Port C bit 1 |
| 腳位 39 | RC2 — Port C bit 2 |
| 腳位 40 | RC3 — Port C bit 3 |
| 腳位 41 | RC4 — Port C bit 4 |
| 腳位 42 | RC5 — Port C bit 5 |
| 腳位 43 | RC6 — Port C bit 6 |
| 腳位 44 | RC7 — Port C bit 7 |
| 腳位 45 | RC8 — Port C bit 8 |
| 腳位 46 | RC9 — Port C bit 9 |
| 腳位 47 | RC10 — Port C bit 10 |
| 腳位 48 | RC11 — Port C bit 11 |
| 腳位 49 | RC12 — Port C bit 12 |
| 腳位 50 | RC13 — Port C bit 13 |
| 腳位 51 | RC14 — Port C bit 14 |
| 腳位 52 | RC15 — Port C bit 15 |
| 腳位 53 | VDD — I/O supply voltage |
| 腳位 54 | VSS — Ground reference |
| 腳位 55 | RD0 — Port D bit 0 |
| 腳位 56 | RD1 — Port D bit 1 |
| 腳位 57 | RD2 — Port D bit 2 |
| 腳位 58 | RD3 — Port D bit 3 |
| 腳位 59 | RD4 — Port D bit 4 |
| 腳位 60 | RD5 — Port D bit 5 |
| 腳位 61 | RD6 — Port D bit 6 |
| 腳位 62 | RD7 — Port D bit 7 |
| 腳位 63 | RD8 — Port D bit 8 |
| 腳位 64 | RD9 — Port D bit 9 |
| 腳位 65 | RD10 — Port D bit 10 |
| 腳位 66 | RD11 — Port D bit 11 |
| 腳位 67 | RD12 — Port D bit 12 |
| 腳位 68 | RD13 — Port D bit 13 |
| 腳位 69 | RD14 — Port D bit 14 |
| 腳位 70 | RD15 — Port D bit 15 |
| 腳位 71 | VDD — I/O supply voltage |
| 腳位 72 | VSS — Ground reference |
| 腳位 73 | RE0 — Port E bit 0 |
| 腳位 74 | RE1 — Port E bit 1 |
| 腳位 75 | RE2 — Port E bit 2 |
| 腳位 76 | RE3 — Port E bit 3 |
| 腳位 77 | RE4 — Port E bit 4 |
| 腳位 78 | RE5 — Port E bit 5 |
| 腳位 79 | RE6 — Port E bit 6 |
| 腳位 80 | RE7 — Port E bit 7 |
| 腳位 81 | RE8 — Port E bit 8 |
| 腳位 82 | RE9 — Port E bit 9 |
| 腳位 83 | VDD — I/O supply voltage |
| 腳位 84 | VSS — Ground reference |
| 腳位 85 | RF0 — Port F bit 0 |
| 腳位 86 | RF1 — Port F bit 1 |
| 腳位 87 | RF2 — Port F bit 2 |
| 腳位 88 | RF3 — Port F bit 3 |
| 腳位 89 | RF4 — Port F bit 4 |
| 腳位 90 | RF5 — Port F bit 5 |
| 腳位 91 | RF6 — Port F bit 6 |
| 腳位 92 | RF7 — Port F bit 7 |
| 腳位 93 | RF8 — Port F bit 8 |
| 腳位 94 | RF9 — Port F bit 9 |
| 腳位 95 | RF10 — Port F bit 10 |
| 腳位 96 | RF11 — Port F bit 11 |
| 腳位 97 | RF12 — Port F bit 12 |
| 腳位 98 | RF13 — Port F bit 13 |
| 腳位 99 | VDD — I/O supply voltage |
| 腳位 100 | VSS — Ground reference |
| 腳位 101 | RG0 — Port G bit 0 |
| 腳位 102 | RG1 — Port G bit 1 |
| 腳位 103 | RG2 — Port G bit 2 |
| 腳位 104 | RG3 — Port G bit 3 |
| 腳位 105 | RG4 — Port G bit 4 |
| 腳位 106 | RG5 — Port G bit 5 |
| 腳位 107 | RG6 — Port G bit 6 |
| 腳位 108 | RG7 — Port G bit 7 |
| 腳位 109 | RG8 — Port G bit 8 |
| 腳位 110 | RG9 — Port G bit 9 |
| 腳位 111 | OSC1 — Crystal oscillator input |
| 腳位 112 | OSC2 — Crystal oscillator output |
| 腳位 113 | MCLR — Master clear / reset (active low) |
| 腳位 114 | VDD — Core supply voltage |
| 腳位 115 | VSS — Ground reference |
| 腳位 116 | TRCLK — Trace clock (debug) |
| 腳位 117 | TRD0 — Trace data 0 (debug) |
| 腳位 118 | TRD1 — Trace data 1 (debug) |
| 腳位 119 | TRD2 — Trace data 2 (debug) |
| 腳位 120 | TRD3 — Trace data 3 (debug) |
| 腳位 121 | DDM — USB D- data line |
| 腳位 122 | DDP — USB D+ data line |
| 腳位 123 | VUSB — USB transceiver supply |
| 腳位 124 | VBUS — USB VBUS detect |
典型應用
PIC32MZ1024ECM124T-I/TL 適用於 6 應用s: Industrial Ethernet Gateway, Connected IoT Sensor Hub, USB-to-CAN Bridge, Building Automation Controller, Embedded HMI / Touch Panel, Secure Point-of-Sale Terminal.
Industrial Ethernet Gateway
The PIC32MZ1024ECM124T-I/TL is a strong fit for industrial Ethernet gateways because it integrates a 10/100 MAC with MII/RMII plus a hardware crypto engine that offloads TLS/SSL handshakes from the CPU. At 200 MHz it sustains wire-rate processing of Modbus TCP, EtherNet/IP, or PROFINET frames while leaving cycles for protocol conversion. The 1 MB dual-panel Flash supports fail-safe OTA firmware updates in the field, and 512 KB of SRAM holds full TCP/IP stacks plus application buffers without external memory.
推薦
Connected IoT Sensor Hub
For connected IoT sensor hubs, the PIC32MZ1024ECM124T-I/TL provides 12-bit 18 MSPS ADC sampling up to 48 analog channels, on-chip AES/SHA crypto, and USB 2.0 High-Speed OTG for local diagnostics. The 9-channel DMA controller streams sensor data to memory without CPU intervention, leaving the 200 MHz core free for edge analytics. Industrial -40C to +85C operation lets the same part serve factory-floor and outdoor enclosures without re-qualification.
推薦
USB-to-CAN Bridge
The PIC32MZ1024ECM124T-I/TL is well suited to USB-to-CAN bridge designs because it combines USB 2.0 High-Speed OTG with dual independent CAN 2.0b controllers on the same die. At 200 MHz the core can repackage USB-CDC frames into CAN messages with deterministic latency, and the 512 KB SRAM buffers both buses without external memory. Industrial temperature rating supports under-hood automotive and machinery deployments where vibration and thermal stress are common.
推薦
Building Automation Controller
Building-automation controllers benefit from the PIC32MZ1024ECM124T-I/TL's mix of Ethernet, dual CAN, multiple UART/SPI/I2C, and 97 programmable I/O lines, which cover BACnet/IP, KNX, Modbus, and proprietary field-bus stacks in one device. The 1 MB dual-panel Flash allows secure OTA updates of building firmware, and the hardware crypto engine authenticates remote management sessions. The 124-VTLA 9x9 mm footprint fits compact DIN-rail enclosures while leaving room for optoisolated field wiring.
推薦
Embedded HMI / Touch Panel
The PIC32MZ1024ECM124T-I/TL drives small to medium HMI panels by pairing the 200 MHz core with the 12-bit ADC for touch sensing and a parallel interface for TFT displays up to WVGA resolution. The 1 MB Flash stores graphics assets and fonts, while 512 KB of SRAM holds frame buffers without external memory. Industrial temperature rating and the on-chip crypto engine also suit secure operator-interface panels on factory floors.
推薦
Secure Point-of-Sale Terminal
Point-of-sale terminals leverage the PIC32MZ1024ECM124T-I/TL's hardware AES/3DES/SHA engine to accelerate PIN encryption and EMV transaction processing, while the 200 MHz MIPS32 microAptiv core handles the application logic and display. The 1 MB dual-panel Flash supports signed firmware updates for PCI compliance, and 512 KB of SRAM holds transaction buffers. USB 2.0 High-Speed OTG plus Ethernet give flexible back-office connectivity for retail deployments.
推薦
推薦產品摘要
LAN8742A
10/100 Ethernet PHY for MII/RMII interface 用於： Industrial Ethernet Gateway, Connected IoT Sensor Hub, Secure Point-of-Sale Terminal
PIC32MZ1024EFM124T-I/TL
Higher-speed drop-in upgrade (252 MHz) 用於： Industrial Ethernet Gateway, Embedded HMI / Touch Panel
PIC32MZ1024ECM124-I/TL
Microchip Technology 用於： Connected IoT Sensor Hub, Secure Point-of-Sale Terminal
MCP2562FD
CAN FD transceiver for the dual CAN 2.0b controllers 用於： USB-to-CAN Bridge, Building Automation Controller
PIC32MZ1024ECM124T-E/TL
Extended-temperature drop-in for under-hood use 用於： USB-to-CAN Bridge
PIC32MZ1024ECH124-I/TL
Microchip Technology 用於： Building Automation Controller
What is the operating frequency of the PIC32MZ1024ECM124T-I/TL?
The PIC32MZ1024ECM124T-I/TL runs at up to 200 MHz on its MIPS32 microAptiv core, delivering 330 DMIPS and 3.28 CoreMark/MHz. According to the Microchip PIC32MZ EC family datasheet, the 200 MHz rating applies to industrial -40C to +85C operation. For designs requiring higher throughput, the newer PIC32MZ EF family scales to 252 MHz.
How much Flash and RAM does the PIC32MZ1024ECM124T-I/TL have?
The PIC32MZ1024ECM124T-I/TL integrates 1 MB (1024 KB) of dual-panel live-update Flash plus 512 KB of SRAM. The dual-panel architecture lets a firmware image be programmed into the inactive panel while the active panel runs, enabling fail-safe field updates. The 512 KB SRAM is large enough for full TCP/IP stacks plus application buffers.
What package does the PIC32MZ1024ECM124T-I/TL use?
The PIC32MZ1024ECM124T-I/TL ships in a 124-pin VTLA (Very Thin Leadless Array) package measuring 9x9 mm with 0.9 mm overall height. The T suffix indicates tape-and-reel packaging for SMT assembly. Per Microchip's package specification, VTLA pads are land-grid-array style under the package body, so PCB land pattern compliance with the IPC-7351 VTLA-124 standard is essential.
Does the PIC32MZ1024ECM124T-I/TL include Ethernet?
Yes. The PIC32MZ1024ECM124T-I/TL integrates a 10/100 Ethernet MAC supporting both MII and RMII interfaces to an external PHY. Combined with the on-chip USB 2.0 High-Speed OTG, dual CAN 2.0b, and hardware crypto engine, the device is targeted at industrial gateway and connected-iot designs where multiple wired interfaces are required.
What is the difference between the PIC32MZ EC and PIC32MZ EF families?
The PIC32MZ EC (Embedded Connectivity) family, which includes the PIC32MZ1024ECM124T-I/TL, runs at 200 MHz with up to 2 MB Flash. The PIC32MZ EF family, Microchip's newer generation, scales to 252 MHz with up to 2 MB Flash and a refreshed peripheral set. Both share the MIPS32 microAptiv core, MPLAB X IDE, and Harmony framework for code portability.
Where can I buy the PIC32MZ1024ECM124T-I/TL?
The PIC32MZ1024ECM124T-I/TL is in stock at major authorized distributors including DigiKey (SKU 5032864), Mouser, and Microchip Direct as of October 2026. Per the DigiKey listing, the part ships same-day for orders placed before the cutoff, with 1-piece pricing starting near USD 13.42. Lead time for 1000-piece reels is typically 8-12 weeks through franchised channels.
What is the price of the PIC32MZ1024ECM124T-I/TL in 1000-piece reels?
The 1000-piece reel price for the PIC32MZ1024ECM124T-I/TL is approximately USD 8.40 as of October 2026, per distributor data. Smaller quantity breaks are USD 13.42 at qty 1, USD 12.08 at qty 10, USD 10.73 at qty 100, and USD 9.39 at qty 500. Volume pricing is best confirmed directly with Microchip or franchised distributors for production BOMs.
What is the lead time for the PIC32MZ1024ECM124T-I/TL?
Distributor stock for the PIC32MZ1024ECM124T-I/TL is generally available immediately at DigiKey and Mouser as of October 2026. For direct factory orders of 1000+ reels, Microchip's standard lead time is 8-12 weeks, though automotive-grade (-V) or extended-temperature (-E) variants may carry different schedules. Always verify with the manufacturer for volume production ramps.
How does the PIC32MZ1024ECM124T-I/TL compare to the PIC32MZ1024ECM124-I/TL?
The PIC32MZ1024ECM124T-I/TL and PIC32MZ1024ECM124-I/TL share the same 124-VTLA 9x9 mm package, 200 MHz core, 1 MB Flash, 512 KB SRAM, and full peripheral set. The only difference is the T suffix, which denotes tape-and-reel packaging versus the tray-packaged non-T variant. Both are fully pin-to-pin compatible and interchangeable on the same PCB land pattern.
What is the difference between the PIC32MZ1024ECM124 and PIC32MZ1024EFM124?
The PIC32MZ1024ECM124 belongs to the EC (Embedded Connectivity) family running at 200 MHz, while the PIC32MZ1024EFM124 belongs to the newer EF family running at 252 MHz. Microchip's product page for the ECM124 explicitly recommends the EFM124 for new designs. Both share the same 124-VTLA footprint but the EFM124 has an updated peripheral mix and higher CoreMark throughput.
When should I choose the PIC32MZ1024ECM124T-I/TL over the PIC32MZ1024EFM124?
Choose the PIC32MZ1024ECM124T-I/TL when you need proven EC-family silicon at 200 MHz with extensive existing firmware support in MPLAB Harmony 2.x. Choose the PIC32MZ1024EFM124 when starting a new design that benefits from the 252 MHz clock, updated peripheral set, and longer lifecycle commitment from Microchip. Both share the 124-VTLA footprint, enabling PCB reuse between designs.
What is the best drop-in replacement for the PIC32MZ1024ECM124T-I/TL?
The PIC32MZ1024EFM124T-I/TL is the most direct drop-in replacement, sharing the same 124-VTLA 9x9 mm package and pinout but with a 252 MHz core. The non-T PIC32MZ1024ECM124-I/TL is also drop-in compatible (tray vs tape-and-reel). Cross-brand pin-compatible replacements in this exact VTLA-124 footprint are not generally available, since competing 32-bit MCU families use different pinouts.
Where can I download the PIC32MZ1024ECM124T-I/TL datasheet?
The PIC32MZ1024ECM124T-I/TL datasheet is available from Microchip's website at the official PIC32MZ Embedded Connectivity family document (DS60001320). The PDF includes complete electrical characteristics, package drawings, peripheral descriptions, and pinout for all 124-VTLA variants of the EC family. Microchip's MPLAB X IDE also links directly to the datasheet from the device-support package.
Where can I find the PIC32MZ1024ECM124T-I/TL pinout?
The 124-VTLA pinout for the PIC32MZ1024ECM124T-I/TL is documented in Section 2 of the PIC32MZ EC family datasheet (DS60001320) and in the device-specific pinout table on Microchip's product page. The VTLA package uses a land-grid-array pad layout under the package body, so the PCB land pattern must follow Microchip's recommended VTLA-124 footprint for reliable assembly.
What are the key specifications of the PIC32MZ1024ECM124T-I/TL that engineers should know?
Per the Microchip datasheet, the PIC32MZ1024ECM124T-I/TL combines a 200 MHz MIPS32 microAptiv core (330 DMIPS), 1 MB dual-panel Flash, 512 KB SRAM, 97 programmable I/O pins, 12-bit 18 MSPS ADC, 10/100 Ethernet MAC, USB 2.0 High-Speed OTG, dual CAN 2.0b, and a hardware crypto engine in a 124-VTLA 9x9 mm package. Industrial -40C to +85C operating temperature and 2.3-3.6 V supply round out the headline specs.
工程參考資料，適用於 PIC32MZ1024ECM124T-I/TL — 比較、設計指引及合規資訊。
選型指南
Choose the PIC32MZ1024ECM124T-I/TL when you need a proven 200 MHz MIPS32 microAptiv MCU with 1 MB dual-panel Flash, 512 KB SRAM, Ethernet, USB 2.0 High-Speed OTG, dual CAN 2.0b, and on-chip crypto for industrial-grade connected designs in a 124-VTLA 9x9 mm package. Use the tray-pack PIC32MZ1024ECM124-I/TL for prototype runs, the -E variant for extended-temperature applications, and the PIC32MZ1024EFM124T-I/TL when you need the newer 252 MHz EF family on the same PCB. Avoid the 512 KB Flash PIC32MZ0512EFK124T-I/TL only if your firmware image clearly fits in 512 KB; otherwise stay with the 1 MB part.
與替代品比較
| 參數 | 本產品 | PIC32MZ1024ECM124-I/TL | PIC32MZ1024ECH124-I/TL | PIC32MZ1024ECM124T-E/TL | PIC32MZ1024EFM124T-I/TL | PIC32MZ0512EFK124T-I/TL |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 124-VTLA (9x9) | 124-VTLA (9x9) | 124-VTLA (9x9) | 124-VTLA (9x9) | 124-VTLA (9x9) | 124-VTLA (9x9) |
| Core Family | PIC32MZ EC (microAptiv) | PIC32MZ EC (microAptiv) | PIC32MZ EC (microAptiv) | PIC32MZ EC (microAptiv) | PIC32MZ EF (microAptiv) | PIC32MZ EF (microAptiv) |
| Max CPU Clock | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 252 MHz (+26%) | 252 MHz (+26%) |
| Flash | 1024 KB | 1024 KB | 1024 KB | 1024 KB | 1024 KB | 512 KB (-50%) |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 128 KB (-75%) |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C | -40C to +85C | -40C to +125C (Extended) | -40C to +85C | -40C to +85C |
| Packaging | Tape & Reel | Tray | Tray | Tape & Reel | Tape & Reel | Tape & Reel |
主要差異化特點
- Drop-in tray-pack alternative with identical die (對比PIC32MZ1024ECM124-I/TL)
- Pin-compatible upgrade path to 252 MHz EF family (對比PIC32MZ1024EFM124T-I/TL)
- Extended-temperature variant on same footprint (對比PIC32MZ1024ECM124T-E/TL)
設計說明
The 124-VTLA package uses a land-grid-array pad layout under the package body. Follow Microchip's recommended VTLA-124 land pattern from the package specification document; deviations cause solder shorts under the body. Place a 4u7 + 100 nF bypass pair on every VDD/VSS pin pair, and route the 50 ohm Ethernet MII/RMII traces as impedance-controlled differential pairs with a continuous ground reference plane beneath.
The PIC32MZ1024ECM124T-I/TL has separate core and I/O supply domains. Decouple VDD (core) and the I/O supply rails with independent ferrite beads or LC filters, and bulk-decouple the VUSB rail with at least 10 uF to meet USB 2.0 High-Speed OTG inrush requirements. Hold the MCLR pin high through a 10 kohm pull-up and a 100 nF cap to ground to ensure clean resets.
At 200 MHz the MIPS32 microAptiv core emits switching noise with significant harmonic content above 100 MHz. Keep high-speed traces under 25 mm, use 4-layer stack-up with continuous ground, and avoid routing Ethernet signals across split planes. For RMII to an external PHY like the LAN8742A, match trace lengths within 50 mil to preserve the 50 MHz reference clock duty cycle.
合規資訊
RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
無鉛
Yes
無鹵
Unknown
衝突礦產
Compliant
RoHS and REACH compliant per Microchip product page; industrial -40C to +85C temperature grade (-I suffix); no AEC-Q100 automotive qualification on this part number.
資料驗證日期： 2026-10-04
— 資料由 XAIPART 元件工程團隊驗證及整理
相關搜尋
PIC32MZ1024ECM124T-I/TL
PIC32MZ1024ECM124T-I/TL datasheet
Microchip PIC32MZ1024ECM124
PIC32MZ EC 200MHz 1MB Flash MCU
124-VTLA 9x9 microcontroller
PIC32MZ industrial Ethernet gateway MCU
PIC32MZ1024ECM124 vs EFM124
PIC32MZ1024ECM124T-I/TL drop-in replacement
buy PIC32MZ1024ECM124T-I/TL
PIC32MZ1024ECM124T-I/TL price 1000 reel
PIC32MZ1024ECM124 pinout VTLA-124
32-bit MIPS microAptiv MCU with crypto engine
what is the operating temperature of PIC32MZ1024ECM124
相關元件與詞彙
Microchip Technology
PIC32MZ1024ECM124T-I/TL
PIC32MZ1024ECM124-I/TL
PIC32MZ1024ECH124-I/TL
PIC32MZ1024ECM124T-E/TL
PIC32MZ1024EFM124T-I/TL
PIC32MZ0512EFK124T-I/TL
MIPS32 microAptiv
PIC32MZ EC family
PIC32MZ EF family
32-bit microcontroller
MCU
microcontroller IC
dual-panel live-update Flash
10/100 Ethernet MAC
USB 2.0 High-Speed OTG
CAN 2.0b
hardware crypto engine
AES
3DES
SHA
MPLAB Harmony
VTLA-124
RoHS
industrial temperature grade
LAN8742A
MCP2562FD
1 / 1