STM32F372VCH6 - 72MHz Cortex-M4 256KB MCU | STMicroelectronics
MPN： STM32F372VCH6 ✓ 啟用中STM32F372VCH6 概覽
A microcontroller is a semiconductor device that executes embedded software and coordinates sensors, actuators, communications, and user interfaces. In the product hierarchy, the STM32F372VCH6 is an MCU, an embedded processor, a semiconductor, and part of the broader embedded-control and industrial-control device categories. Its Cortex-M4 architecture supports efficient real-time control while integrating hardware peripherals for connected equipment.
Verified distributor information identifies a 32-bit ARM Cortex-M4 core, 72 MHz operating frequency, 256 KB Flash organized as 256K x 8, and a 100-UFBGA 7 x 7 mm package. Additional distributor descriptions identify dual watchdogs and numerous peripherals. The listed package is intended for compact PCB layouts, while the 256 KB Flash provides application-program storage for control code, configuration data, and firmware updates.
The STM32F372VCH6 is suitable for industrial automation, motor control, communications equipment, sensing systems, and consumer electronics. Its 72 MHz processing capability can support time-sensitive control loops, while the integrated MCU peripherals reduce the need for separate interface devices. Designers should confirm exact peripheral availability, electrical limits, pin assignments, and memory-map details from the STMicroelectronics STM32F373 family documentation before finalizing a new design.
A key engineering consideration is package and pin verification. This exact orderable MPN uses a 100-UFBGA package according to DigiKey and Mouser, so replacement must match the land pattern and pin functions rather than merely share the STM32F3 name. A similarly named STM32F3 device in another package may not be a drop-in substitute.
For firmware bring-up, use the documented STMicroelectronics programming and debug workflow, preserve the required reset and clock behavior, and validate the power supply and decoupling network against the manufacturer reference design. Use the family documentation as the source of truth for peripheral configuration and pin multiplexing.
This page combines verified distributor specifications, sourcing links, package information, and design-oriented selection guidance. It does not invent electrical details absent from the supplied web data; missing parameters are explicitly marked for verification.
直接替換替代品，適用於 STM32F372VCH6 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： STM32F372VCH6 （相同外形與佔位） — 差異在於 Architecture, Flash Organization, Package, Supply Voltage.
STM32F373VCH6
✅ 直接替換聯絡詢價
查看資料表 →STM32F372VCH6 最大額定值與電氣特性
| Core | ARM Cortex-M4 |
| Architecture | 32-bit |
| 最大時脈頻率 | 72 MHz |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 |
| Product Series | STM32F3 |
| Series Position | STM32F372 |
| 封裝 | 100-UFBGA |
| Package Dimensions | 7 x 7 mm |
| 腳位數 | 100 pins |
| 安裝類型 | Surface mount |
| 供應電壓 | 2.5 V / 3.3 V |
| Watchdog Count | Dual watchdogs |
| Peripheral Integration | Numerous peripherals |
| Manufacturer Documentation | STM32F373 documentation page |
STM32F372VCH6 7 x 7 mm 腳位配置指南
STM32F372VCH6（7 x 7 mm 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： STM32F372VCH6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32F372VCH6 適用於 6 應用s: Industrial Automation Controller, Motor Control and Power Electronics, Connected Sensor Node, Communications Equipment, Consumer Electronics and Embedded Products, Test and Measurement Front End.
Industrial Automation Controller
The STM32F372VCH6 fits compact automation equipment where a 72 MHz ARM Cortex-M4 core must execute control logic while the 256 KB Flash stores application firmware and configuration data. Its 100-UFBGA 7 x 7 mm package can reduce board footprint compared with larger leaded packages, making the MCU useful in distributed controllers, sensor gateways, and equipment-control modules. The design should be validated against the exact required timer, communications, analog, and industrial-temperature specifications before schematic release. Verify decoupling, grounding, reset behavior, and exposed-package assembly details using the official STMicroelectronics documentation.
推薦
Motor Control and Power Electronics
The 72 MHz Cortex-M4 processor in STM32F372VCH6 can provide the computational headroom expected in real-time embedded control systems, while 256 KB Flash provides room for control algorithms and configuration. It may suit compact motor-drive or actuator-control designs only after timer channels, PWM capability, encoder interfaces, ADC performance, fault handling, and operating-temperature limits are confirmed in the family documentation. Do not infer suitability from clock speed alone. Validate current sensing, power-stage isolation, watchdog behavior, and thermal performance during prototype testing.
推薦
Connected Sensor Node
STM32F372VCH6 is a logical candidate for a compact sensor node that must acquire measurements, run local filtering, and communicate through a serial or industrial network interface. Its 256 KB Flash provides storage for embedded application code, while the 100-UFBGA package helps minimize PCB area in distributed sensing equipment. Because the supplied data does not identify the exact communication peripherals or ADC resources, the engineer must verify interface availability, electrical levels, timing, and low-power requirements in the manufacturer documentation. Select external transceivers and sensors only after those checks pass.
推薦
Communications Equipment
The STM32F372VCH6 can serve as the control processor in compact communications equipment when the design needs a 72 MHz Cortex-M4 core and 256 KB Flash without requiring a large external processor. The MCU can coordinate protocol handling, configuration, status reporting, and supervisory logic. The exact UART, USB, CAN, or other interface availability is not included in the supplied distributor snippets, so no specific interface should be claimed without checking the official STM32F373 documentation. Board-level signal integrity, ESD protection, connector routing, and firmware timing should be reviewed with the final peripheral configuration.
推薦
Consumer Electronics and Embedded Products
The STM32F372VCH6 can support compact consumer or embedded products that need a dedicated real-time controller instead of a general-purpose application processor. Its 72 MHz Cortex-M4 performance and 256 KB Flash are useful for user-interface control, actuator management, status logic, and firmware organization in a small 7 x 7 mm package. Confirm whether the required display, audio, storage, USB, and touch peripherals exist before committing to it. Mechanical placement, thermal exposure, EMC, and end-of-life sourcing requirements should also be considered for consumer-volume production.
推薦
Test and Measurement Front End
The STM32F372VCH6 can be considered for a compact measurement front end when firmware must coordinate sensor acquisition, calibration, status indicators, and a communications link. The Cortex-M4 core provides real-time processing capability and the 256 KB Flash provides a defined application-code budget for basic control software. However, the supplied data does not verify analog resolution, sample rate, timer accuracy, reference accuracy, or operating-temperature range. Those parameters are decisive for instrumentation, so validate them in the official datasheet and reference design before using the MCU as the measurement front end.
推薦
推薦產品摘要
工程參考資料，適用於 STM32F372VCH6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32F373VCH6 |
|---|---|---|
| Package | 100-UFBGA | 100-UFBGA - same package family indicated; exact footprint comparison requires verification |
| Brand | STMicroelectronics | STMicroelectronics |
主要差異化特點
- 72 MHz ARM Cortex-M4 processing (對比STM32F373VCH6)
- Compact 100-UFBGA implementation (對比STM32F373VCH6)
- Documented 256 KB Flash budget (對比STM32F373VCH6)
- Dual-watchdog support in distributor descriptions (對比STM32F373VCH6)
設計說明
Use the official STMicroelectronics 100-UFBGA land pattern and assembly recommendations rather than generating a footprint from the package dimensions alone. Confirm ball numbering, pad and mask definitions, paste volume, reflow profile, and any exposed thermal or ground-pad requirements. Because the supplied data does not include a complete pin map, preserve the manufacturer footprint and validate it against the exact package drawing before fabrication.
Follow the STM32F373 family reference design for supply routing and decoupling. Place required bulk and high-frequency capacitors close to the appropriate power pins, keep supply and return paths short, and verify the 2.5 V / 3.3 V operating context against the complete device datasheet. Do not assume the distributor snippet defines all voltage limits, current requirements, or power-sequencing constraints.
Review every high-speed or communication signal for proper reference planes, controlled impedance where applicable, series termination, and protection before layout release. Keep sensitive analog or timing paths away from switching nodes and noisy power loops. The supplied data does not enumerate the MCU communication peripherals or their electrical characteristics, so pin selection and edge-rate calculations must use the official datasheet and peripheral documentation.
Do not substitute a similarly named STM32 device solely because it has a Cortex-M4 core or a related package. Verify the exact 100-UFBGA ball map, memory size, peripheral set, voltage limits, clock configuration, package markings, and software-device support. Also check whether the firmware uses device-specific register definitions, because a nominal package match does not guarantee register-level or peripheral-level compatibility.
合規資訊
The supplied distributor and search data do not provide verified compliance declarations for STM32F372VCH6. Obtain current RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification information from STMicroelectronics or an authorized distributor before making a compliance claim.
