STM32MP157CAC3 - Dual Cortex-A7 650MHz + M4 MPU | ST
MPN： STM32MP157CAC3 ✓ 啟用中| 數量 | 單價 | 小計 |
|---|---|---|
| 1 | $33.1 | $33.10 |
| 10 | $30.5 | $305.00 |
| 100 | $27.9 | $2,790.00 |
| 500 | $25.8 | $12,900.00 |
| 1,000 | $24.2 | $24,200.00 |
STM32MP157CAC3 概覽
An MPU (microprocessor unit) is a general-purpose processor that runs rich operating systems such as Linux or Android, unlike a microcontroller (MCU) that executes bare-metal or RTOS firmware from on-chip flash. The STM32MP1 series bridges both worlds: the Cortex-A7 subsystem handles Linux-based user interfaces and networking, while the Cortex-M4 core delivers deterministic real-time control, all on one die. This heterogeneous architecture reduces system complexity and BOM cost compared with a discrete MPU-plus-MCU two-chip solution.
Key features include 2x Ethernet GMAC with 1-Gbps RGMII compliance per IEEE-802.3ab, 2x USB 2.0 OTG, 8x UART, 5x I2C, 5x SPI, 2x CAN FD, an OpenGL ES 2.0-capable 3D GPU, MIPI DSI display interface, and a 12-bit ADC with up to 16 channels. Memory support spans 16-bit DDR3/DDR3L/LPDDR2/LPDDR3 plus NAND, NOR, and SRAM controllers. A cryptographic accelerator covers AES, DES, 3DES, SHA-1, SHA-256, and MD5 with secure boot support.
The device is fabricated on a 28nm FD-SOI process, delivering roughly 1300 DMIPS from the dual Cortex-A7 cores plus 240 DMIPS from the Cortex-M4, with multiple low-power modes (Sleep, Stop, Standby). Core voltage is 1.2 V with I/O rails from 1.8 V to 3.3 V.
Typical applications include industrial HMI panels, smart home and IoT gateways, medical monitoring devices, and edge nodes needing Linux connectivity alongside hard real-time motor control or sensor acquisition on the M4 core.
Design consideration: use the STPMIC1 PMIC for the required multi-rail power sequencing (VDD, VDD_CPU, VDD_IO) and apply impedance-controlled DDR3 routing with proper termination for signal integrity.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.
直接替換替代品，適用於 STM32MP157CAC3 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： STM32MP157CAC3 （相同外形與佔位） — 差異在於 Core Processor, Package, Number of Cores, Security, Series.
快速比較工具 — 選擇替代零件進行並排比較：
STM32MP157CAD3
✅ 直接替換📋 參考替代品（不在目錄中）
STM32MP157CAD3T
✅ 直接替換📋 參考替代品（不在目錄中）
STM32MP153CAC3
✅ 直接替換聯絡詢價
查看資料表 →STM32MP157FAD7
✅ 直接替換聯絡詢價
查看資料表 →STM32MP151AAD3
✅ 直接替換聯絡詢價
查看資料表 →STM32MP133CAG3
✅ 直接替換📋 參考替代品（不在目錄中）
STM32MP157CAC3 最大額定值與電氣特性
| Core Processor | Dual Arm Cortex-A7 + Arm Cortex-M4 |
| Cortex-A7 Max Frequency | 650 MHz |
| Cortex-M4 Max Frequency | 209 MHz |
| Architecture | 32-bit, 2+1 core heterogeneous |
| Series | STM32MP1 |
| Ethernet | 2x GMAC, 1-Gbps RGMII (IEEE-802.3ab) |
| USB | 2x USB 2.0 OTG |
| UART | 8x |
| SPI | 5x |
| I2C | 5x |
| CAN | 2x CAN FD |
| GPU | 3D GPU (OpenGL ES 2.0) |
| Display Interface | TFT / MIPI DSI |
| DRAM Controller | 16-bit DDR3/DDR3L/LPDDR2/LPDDR3 |
| Security | Crypto accelerator (AES, DES, 3DES, SHA-1, SHA-256, MD5), secure boot |
| 工作溫度 | -40C to +125C |
| 封裝 | 361-TFBGA (12x12 mm) |
| 安裝類型 | Surface Mount |
| RoHS 狀態 | Compliant |
STM32MP157CAC3 361-tfbga (12x12 mm) 腳位配置指南
STM32MP157CAC3（361-tfbga (12x12 mm) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： STM32MP157CAC3.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32MP157CAC3 適用於 6 應用s: Industrial HMI Panels, Smart Home and IoT Gateways, Medical Monitoring Devices, Edge AI and Vision Nodes, Building Automation Controllers, Consumer Appliances with Displays.
Industrial HMI Panels
The STM32MP157CAC3 fits industrial human-machine interface panels because its 3D GPU (OpenGL ES 2.0) and MIPI DSI display controller drive touchscreen UIs while the dual Cortex-A7 at 650 MHz runs Linux-based visualization software. Industrial protocols ride on 2x Ethernet GMAC (1-Gbps RGMII per IEEE-802.3ab), 2x CAN FD, and 8x UART, letting one chip replace an MPU plus separate fieldbus controller. The Cortex-M4 at 209 MHz handles safety-critical I/O scanning deterministically under OpenAMP. Its -40C to +125C rating and secure boot via the crypto accelerator (AES, SHA-256) satisfy factory-floor robustness and firmware integrity requirements that consumer-grade application processors cannot meet.
推薦
Smart Home and IoT Gateways
Smart home and IoT edge gateways benefit from the STM32MP157CAC3's combination of Linux-capable dual Cortex-A7 cores and rich connectivity: 2x Ethernet for WAN/LAN bridging, 2x USB 2.0 OTG for cellular or Wi-Fi dongles, and SDMMC for storage. The Cortex-M4 coprocessor continuously samples Zigbee, Thread, or sensor radio interfaces at 209 MHz while Linux manages cloud connectivity, cutting latency for local automation rules. The cryptographic accelerator covering AES and SHA-256 with secure boot secures OTA firmware updates, a hard requirement for consumer IoT. Multiple low-power modes (Sleep, Stop, Standby) on the 28nm FD-SOI process reduce standby consumption for always-on wall-powered gateways.
推薦
Medical Monitoring Devices
The STM32MP157CAC3 serves medical monitoring equipment where the -40C to +125C industrial grade, deterministic Cortex-M4 core, and secure boot chain support regulatory-oriented designs. The M4 at 209 MHz acquires physiological signals from the 12-bit, 16-channel ADC with hard real-time timing, while dual Cortex-A7 cores at 650 MHz run the Linux UI, charting, and network telemetry over 1-Gbps Ethernet or USB. The cryptographic engine (AES, 3DES, SHA-256, MD5) protects patient-data links and authenticated firmware. A single heterogeneous device consolidates signal chain control and UI processing, shrinking the BOM of bedside monitors, infusion interfaces, and portable diagnostic terminals.
推薦
Edge AI and Vision Nodes
For edge nodes that preprocess camera or sensor data, the STM32MP157CAC3 provides Linux-level connectivity and application logic while offloading deterministic sampling to the Cortex-M4. Although the 3D GPU targets graphics rather than neural inference, the dual Cortex-A7 at 650 MHz (about 1300 DMIPS total) runs lightweight vision preprocessing, and the MIPI DSI/TFT pipeline outputs local previews. Gigabit RGMII Ethernet streams processed data to servers; CAN FD and UART link to actuators. Designers needing heavier inference pair this MPU with an external accelerator over USB or Ethernet, using the STM32MP157CAC3 as the deterministic control and communications hub of the node.
推薦
Building Automation Controllers
Building automation controllers use the STM32MP157CAC3 to merge BMS protocol gateways and local control loops on one die. Two CAN FD interfaces and dual GMAC Ethernet (IEEE-802.3ab RGMII) carry BACnet/MS-TP and IP traffic, while 5x SPI, 5x I2C, and 8x UART connect HVAC sensors, meters, and drivers. The Cortex-M4 executes deterministic control loops (damper, valve, PID) at 209 MHz independent of Linux maintenance and reboots on the Cortex-A7 side, improving availability. Secure boot and the crypto accelerator protect controller firmware in accessible building infrastructure, and the -40C to +125C range covers rooftop and mechanical-room environments.
推薦
Consumer Appliances with Displays
Connected appliances - coffee machines, ovens, thermostats with rich UIs - map well to the STM32MP157CAC3: the 3D GPU and MIPI DSI interface render animated touch interfaces, dual Cortex-A7 cores run Linux application stacks with Wi-Fi/BLE dongles on USB 2.0 OTG, and the Cortex-M4 manages motor, heater, and sensor loops in real time. The 28nm FD-SOI process and Standby mode cut standby power toward regulatory limits. One-chip integration of UI, connectivity, and control displaces an MCU-plus-processor two-chip design, reducing BOM cost and certification surface, while STMicroelectronics' long-lifetime industrial-grade commitment suits appliance service-life expectations.
推薦
推薦產品摘要
工程參考資料，適用於 STM32MP157CAC3 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32MP157CAD3 | STM32MP153CAC3 | STM32MP157FAD7 | STM32MP151AAD3 | STM32MP133CAG3 |
|---|---|---|---|---|---|---|
| Package | 361-TFBGA (12x12 mm) | 361-TFBGA - same | 361-TFBGA - same | 361-TFBGA - same | 361-TFBGA - same | 361-TFBGA - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Cortex-M4 Coprocessor | Yes, 209 MHz | Yes | Yes | Yes | Yes | Yes |
| 3D GPU | Yes (OpenGL ES 2.0) | Yes | No | Yes | No | No |
| Lifecycle Status | Active | Active | Active | Active | Active | Active |
主要差異化特點
- Integrated 3D GPU and MIPI DSI display subsystem (對比STM32MP153CAC3)
- Dual-core heterogeneity (A7 + M4) on one die (對比STM32MP151AAD3)
- Upgrade path to 800 MHz-class silicon (對比STM32MP157FAD7)
設計說明
Use the STPMIC1 PMIC rather than discrete regulators: the STM32MP157CAC3 requires strictly sequenced rails (VDD, VDD_CPU, VDD_IO plus DDR supplies), and the STPMIC1 implements the correct order with I2C control. Estimated: a typical Linux design draws core, DDR, and I/O currents summing to roughly 1-3 W depending on CPU load; verify against the datasheet power tables at your actual 650 MHz operating point. Follow the STMicroelectronics STM32MP157x-EV1 reference design for rail sequencing and decoupling placement.
DDR3/LPDDR routing is the leading cause of board bring-up failure on this MPU. Use length-matched, impedance-controlled traces (50 ohm single-ended, 100 ohm differential for clocks), proper on-die termination settings, and reference-plane continuity under the byte lanes. Follow the layout guidelines in the STMicroelectronics datasheet and application notes for the 16-bit DDR interface. Keep DDR traces on layers adjacent to a solid ground plane and avoid crossing plane splits anywhere in the address/data bus.
Boot media configuration is a frequent pitfall: the STM32MP157CAC3 boot pins select NAND, NOR, SDMMC, or eMMC at reset, and an incorrect strap leaves the board unbootable with no diagnostic output. Verify boot mode strapping against the datasheet boot-selection table before first power-up. Also reserve the Cortex-M4 resource partition (RAM region, peripherals) in the device tree when running OpenAMP, or Linux and the M4 will contend for shared peripherals.
合規資訊
RoHS compliant per standard STMicroelectronics STM32MP1 product listings; REACH and halogen-free status not stated in provided data.
