بەرهەمەکان (5,100+)

CY7C68001-56PVXC - USB 2.0 Controller | Infineon
CY7C68001-56PVXC

CY7C68001-56PVXC - USB 2.0 Controller | Infineon

The Infineon Technologies CY7C68001-56PVXC is a USB 2.0 high-speed interface controller with an 8/16-bit parallel datapath, operating from a 24 MHz clock and housed in a 56-pin SSOP package. The device provides the USB-facing signal processing and transaction handling required to add USB connectivity to a design built around an external microprocessor, DSP, ASIC, or FPGA. A USB interface controller is an interface IC that bridges a conventional parallel processor bus with a serial USB link. It belongs to the USB controller hierarchy, where USB 2.0 support is added to an embedded system without requiring the host processor to implement the complete USB physical and protocol layer. The CY7C68001 series is identified as the EZ-USB SX2 high-speed USB interface device and also appears in documentation for EZ-USB AT2LP USB 2.0-to-ATA/ATAPI bridges. Verified catalog information identifies an 8/16-bit datapath, a 24 MHz operating frequency, USB 2.0 connectivity, and a 56-pin SSOP package. The associated documentation also describes support for CompactFlash and one ATA or ATAPI device, board-level manufacturing test through the USB interface, and a high-impedance ATA interface state that permits sharing the ATA bus with another controller such as an IEEE-1394 controller. The parallel datapath lets an external processor exchange USB data through a conventional parallel interface while the dedicated USB controller handles the USB 2.0 high-speed endpoint behavior. This architecture is useful when a product already contains a capable application processor but needs a specialized, standards-oriented USB interface. The 56-pin SSOP package also provides a larger pin count than many compact USB transceivers, supporting the parallel-side connections and dedicated control signals required by this bridge-oriented device family. Typical uses include USB-to-ATA storage adapters, CompactFlash readers, board-level production and manufacturing test systems, and legacy peripheral designs being upgraded with USB 2.0 connectivity. The ATA/ATAPI description and CompactFlash support make the controller especially relevant to storage-interface bridges rather than general-purpose low-speed USB transceivers. Designers should verify the exact pin functions, clock requirements, timing limits, power rails, ATA interface states, and external component requirements against the manufacturer datasheet before layout. The verified excerpts do not provide complete electrical tables or a complete pin list, so those details should not be inferred from the catalog summary. The SSOP package also requires careful plane assignment and signal-integrity review around the high-speed USB differential pair. This page consolidates verified distributor catalog information, package identification, USB function details, candidate drop-in comparisons, and practical design cautions. It distinguishes documented facts from unverified specifications and avoids presenting unsupported timing, pricing, compliance, or pin-assignment data as established engineering parameters.

RFQ پەیوەندی
CY7C68001-56PVXCT USB 2.0 Controller | Infineon
CY7C68001-56PVXCT

CY7C68001-56PVXCT USB 2.0 Controller | Infineon

The Infineon Technologies CY7C68001-56PVXCT is a USB 2.0 controller with a parallel interface, supplied in a 56-pin SSOP package. The device is identified in commercial catalogs as an 8/16-bit datapath USB interface controller and is intended for systems that require a host or device USB interface bridged to a parallel data bus. Its 56-lead surface-mount package supports compact integration in industrial, instrument, communications, and embedded USB equipment. A USB controller is an interface IC that manages the physical USB connection, transaction handling, and transfer of data between a USB bus and an internal parallel processor or peripheral. The CY7C68001-56PVXCT sits within the hierarchy of USB interface controllers, interface ICs, and broader semiconductor signal-processing devices. Its parallel datapath provides a practical bridge between a USB connection and a conventional digital system bus. The principal identifiable features are USB 2.0 operation, an 8/16-bit parallel datapath, a 56-pin SSOP package, and commercial temperature-grade positioning. The controller is useful when a board needs USB connectivity without routing the USB traffic directly into the host processor's internal bus architecture. The parallel interface can simplify firmware interfacing when the system already uses an 8-bit or 16-bit external data path. The CY7C68001 family belongs to the USB controller and bus-controller product category rather than to microcontrollers or general-purpose interface transceivers. Its role is protocol and datapath management at the USB-to-parallel boundary. This makes it relevant to embedded control boards, test equipment, data-acquisition systems, printers, scanners, and other peripherals where USB is the external connection and an embedded controller manages the local data path. Typical applications include USB-to-parallel embedded bridges, laboratory and industrial interface adapters, USB data acquisition front ends, and compact control systems requiring a deterministic parallel interface. In these applications, the controller can offload USB transaction handling from the main processor while preserving a familiar parallel bus connection for registers, FIFOs, or external peripherals. The primary design consideration is confirming the controller's electrical interface, clocking, firmware support, and signal timing against the system architecture. Place the device with its signal and power connections organized according to the manufacturer datasheet, provide appropriate decoupling at the supply pins, and route high-speed USB differential traces as a controlled impedance pair. Keep the parallel bus timing margin explicit in the firmware and board design. This page summarizes the part's identified USB interface role, package, and commercial catalog attributes, then adds application context, design guidance, comparison criteria, and sourcing questions that are more useful than a basic distributor listing alone.

RFQ پەیوەندی
CY7C68003-20FNXI - Full-Speed USB 2.0 | Infineon
CY7C68003-20FNXI

CY7C68003-20FNXI - Full-Speed USB 2.0 | Infineon

Infineon Technologies CY7C68003-20FNXI is a full-speed USB 2.0 transceiver with one transmitter and one receiver, operating from a 1.8 V to 3.3 V supply in a 20-WLCSP package measuring 2.14 mm by 1.76 mm. The compact device provides the physical-layer signaling required to connect a USB 2.0 controller, processor, or peripheral to a USB connector. A USB transceiver is an interface IC that converts digital data from a host or device controller into USB differential signaling, and converts incoming differential signals into logic-level data. The USB transceiver belongs to the interface IC hierarchy, alongside USB controllers, serial transceivers, and line drivers. Its full-speed designation corresponds to USB 2.0 low-speed and full-speed operation rather than USB 2.0 high-speed operation. The verified product information identifies a one-driver, one-receiver configuration, a full-speed USB 2.0 interface, and a 1.8 V to 3.3 V supply range. These characteristics suit space-constrained portable equipment, industrial controllers, and USB peripherals that use low-voltage digital logic. The very small WLCSP footprint reduces board area but requires careful assembly and routing practices. The part's compact 20-WLCSP construction is suitable for high-density designs where connector placement, EMI control, and trace length are important. Because this is a physical-layer transceiver, system behavior also depends on the connected USB controller, pull-up or pull-down implementation, crystal or clock source, termination network, connector, and firmware configuration. The transceiver alone does not negotiate USB speed or implement the complete protocol stack. Typical applications include USB-to-serial adapters, embedded USB peripherals, portable instruments, industrial data-acquisition equipment, and compact control systems. In each case, the 1.8 V to 3.3 V operating range aligns with modern low-voltage processors, while the 2.14 mm by 1.76 mm footprint supports compact assemblies. A critical design consideration is PCB layout. USB differential traces should be routed as a controlled-impedance pair over a continuous ground plane, with minimized stubs and careful separation from switching nodes. The manufacturer's datasheet should be consulted for the exact ball assignments, exposed-pad treatment, recommended capacitors, and USB routing dimensions. This page combines verified supplier information, package and interface specifications, replacement-family references, pricing context, and practical USB PCB-design guidance to support faster component selection and design review.

RFQ پەیوەندی
CY7C68003-20FNXIT Full-Speed USB 2.0 Transceiver | Infineon
CY7C68003-20FNXIT

CY7C68003-20FNXIT Full-Speed USB 2.0 Transceiver | Infineon

The Infineon CY7C68003-20FNXIT is a single-transceiver USB 2.0 full-speed interface IC offered in a 20-ball WLCSP package measuring 2.14 mm by 1.76 mm. The device is identified as the MoBL USB TX3LP18, placing it in the low-power MoBL USB family. Its compact footprint supports designs where connector placement, board area, and routing distance strongly influence the overall USB interface layout. A USB transceiver converts between the serial data signaling used by a USB controller and the electrical signaling present on a USB connection. A full-speed USB transceiver operates within the USB 2.0 full-speed range and is intended for USB controllers or processors that implement the required USB protocol and data handling. The CY7C68003 provides one transceiver, allowing a single USB connection to be supported without a multi-port transceiver array. The principal feature of the CY7C68003-20FNXIT is its integration into one 20-ball WLCSP package. At only 2.14 mm by 1.76 mm, the package substantially reduces the routing area required by the interface circuit. The MoBL designation also indicates a design intended for mobile and portable applications where low power and compact implementation are important considerations. Exact operating voltage, current, temperature range, and I/O characteristics are defined in the manufacturer datasheet. This interface IC is suited to portable equipment, data-collection terminals, personal computer accessories, and other embedded USB products. In each case, the surrounding controller must contain a compatible USB device or host controller core, because the transceiver handles the physical interface rather than the complete USB protocol stack. Firmware determines enumeration behavior, descriptor handling, power management, and the supported USB class. PCB implementation requires careful treatment of the USB data and supply connections. Short, impedance-controlled routing from the transceiver to the USB connector minimizes reflections and susceptibility to external interference. Decoupling capacitance should be placed close to the relevant supply pins, while the ground structure should provide a low-impedance return path beneath and around the interface section. The WLCSP land pattern also requires assembly processes capable of handling very small pitch packages. Because the CY7C68003-20FNXIT is a dedicated interface component rather than a complete USB controller, designers should select it when USB host or device functionality already exists elsewhere in the system. This page combines the confirmed interface and package characteristics with practical guidance on routing, decoupling, assembly, component selection, and design trade-offs.

RFQ پەیوەندی
CY7C68003-24LQXI - USB 2.0 ATA Bridge | Infineon | 24-QFN
CY7C68003-24LQXI

CY7C68003-24LQXI - USB 2.0 ATA Bridge | Infineon | 24-QFN

Infineon Technologies CY7C68003-24LQXI is a full-speed USB 2.0 interface transceiver and EZ-USB AT2LP bridge that supports CompactFlash and one ATA/ATAPI device in a 24-QFN (4 x 4 mm) surface-mount package. It operates from a 1.8 V to 3.3 V supply over a -40°C to +85°C temperature range. The device provides the physical interface required to connect USB storage equipment to an ATA or ATAPI-compatible embedded controller. An EZ-USB AT2LP bridge is a specialized interface IC that translates between the USB 2.0 bus and an ATA/ATAPI storage bus. Within the product hierarchy, it belongs to the USB transceiver family, then to interface ICs, and finally to the broader semiconductor category. This bridge is intended to simplify USB-to-ATA product designs by combining USB signaling and ATA-side control in one compact package. Key verified features include full-speed USB 2.0 operation, support for CompactFlash and one ATA/ATAPI device, and board-level manufacturing test through the USB interface. The ATA interface can also be placed in a high-impedance state, allowing the ATA bus to be shared with another controller such as an IEEE-1394 controller. Its 24-QFN package supports compact PCB layouts while the exposed pad provides a thermal connection to the board. The CY7C68003 family separates USB connectivity from the storage-facing ATA interface and is intended for board-level embedded storage designs. Board-level manufacturing test is especially useful because production fixtures can exercise the attached storage path over USB instead of requiring a separate ATA test interface. The shared-bus capability also provides a route to designs in which USB and another transport must coexist. Typical applications include USB CompactFlash readers, USB-to-ATA storage adapters, embedded industrial data loggers, portable diagnostic equipment, board-level storage subsystems, and legacy ATA peripheral modernization. These systems benefit from a single USB-facing interface while retaining compatibility with CompactFlash or ATA/ATAPI storage devices. Designers should account for the 1.8 V to 3.3 V operating range, the -40°C to +85°C industrial temperature rating, exposed-pad layout, USB routing, and ATA signal-integrity requirements. The datasheet-supported high-impedance ATA mode must be coordinated carefully whenever multiple potential bus controllers share the ATA side. This page consolidates verified distributor information, same-family replacement options, package details, and application-specific engineering guidance. It distinguishes genuine same-footprint alternatives from cross-package parts that would require PCB redesign, helping engineers make a replacement decision based on fit, function, sourcing, and thermal requirements rather than part-number similarity alone.

RFQ پەیوەندی
CY7C68003-24LQXIT USB 2.0 Transceiver | Infineon
CY7C68003-24LQXIT

CY7C68003-24LQXIT USB 2.0 Transceiver | Infineon

Infineon Technologies CY7C68003-24LQXIT is a 1/1 full-speed USB 2.0 transceiver in a 24-QFN package measuring 4 mm by 4 mm. The MoBL-USB TX2UL device provides the interface between a USB controller and a USB physical layer, while the distributor classification also identifies it as a driver and receiver component. Its compact square package supports space-conscious USB connectivity designs without requiring a large peripheral footprint. A USB transceiver is an interface IC that converts signals between a USB controller and the physical USB data path. In the broader hierarchy, this USB interface transceiver belongs to the semiconductor and interface-controller category. The term MoBL-USB identifies the low-power USB controller family associated with the CY7C68003, while TX2UL identifies the transceiver configuration described for this exact device. The verified product listings identify the part as a one-transceiver, full-speed USB 2.0 solution rather than a multi-channel USB hub controller. Its stated 24-QFN construction supports compact PCB integration, and the exposed-pad package description provides a practical thermal path when the device is used with sustained USB activity. The exact electrical limits, voltage ratings, and signal timing should be confirmed against the manufacturer datasheet before release. Typical implementation choices include portable-device controllers, USB-to-serial adapters, embedded USB connectivity, and compact peripheral interfaces. These applications benefit from a dedicated transceiver that separates controller-side signaling from the USB physical connection. Firmware and board-level design must also account for the controller's operating state, USB power requirements, signal routing, and the transceiver's enable or sleep behavior. The most important layout consideration is controlled USB differential routing. Place input and output decoupling capacitors close to their associated supply pins, preserve the recommended return-path continuity beneath the interface, and avoid routing USB signals through areas affected by switching nodes. The exposed pad should be connected according to the manufacturer land-pattern and thermal-via guidance. This page consolidates the exact package, USB classification, transceiver ratio, lifecycle-facing distributor context, and source links for CY7C68003-24LQXIT. It also provides practical application guidance, a parameter comparison framework, and explicit notes for identifying a true pin-compatible replacement rather than relying only on a similar USB transceiver description.

RFQ پەیوەندی
CY7C68013A-100AXI - 48MHz EZ-USB FX2LP | Infineon
CY7C68013A-100AXI

CY7C68013A-100AXI - 48MHz EZ-USB FX2LP | Infineon

Infineon Technologies CY7C68013A-100AXI is a high-speed USB 2.0 peripheral controller with an enhanced 8051 core, 48 MHz operating frequency, 16 KB internal RAM, and 40 general-purpose I/O pins in a 100-pin TQFP package. The ROMless EZ-USB FX2LP architecture combines an integrated USB 2.0 transceiver, programmable endpoint logic, and a low-cost 8051 microcontroller to support data-transfer rates above 53 MB/s. An EZ-USB FX2LP USB microcontroller is a specialized USB interface controller that places a configurable USB peripheral, USB transceiver, and embedded 8051 processor on one device. Within the product hierarchy, it belongs to the USB interface controller class, then microcontrollers, then integrated circuits and semiconductors. Its principal advantage over a discrete USB system interface controller is that firmware can configure endpoint behavior, packet handling, and data routing without requiring a separate external USB transceiver. Key features include full-speed and high-speed USB 2.0 operation, 16 KB of internal RAM, 40 GPIO, an enhanced 8051 processor, and integrated USB transceiver circuitry. The controller supports multiple endpoint configurations, allowing a system to buffer data, perform local transformations, or separate streams before transferring them over USB. Its ROMless architecture leaves the final application firmware in external memory, which supports product-specific boot code, device identification, and configuration routines. The FX2LP architecture is designed for high-throughput peripheral applications where USB bandwidth is more important than general-purpose processor integration. Its 8051 core operates at 48 MHz, while the USB engine handles the protocol and transfer functions. Up to 16 KB of internal RAM provides working space for descriptors, endpoint buffers, status variables, and firmware routines. The 100-pin TQFP package also exposes substantially more GPIO and interface signals than compact 56-pin FX2LP variants. Typical uses include USB-to-serial adapters, logic analyzers, test and measurement equipment, data acquisition systems, custom USB peripherals, and industrial data-logging products. In a logic analyzer, the GPIO array can capture digital activity while the USB engine transfers buffered samples to a host computer. In an instrumentation product, firmware can implement device-specific protocols and data formats while preserving full-speed and high-speed USB connectivity. Designers should select external flash and passive components according to the manufacturer's reference circuit, preserve the required USB impedance-controlled layout, and provide correct power, clock, reset, and decoupling arrangements. Firmware planning must also account for endpoint RAM allocation, setup packet handling, and host compatibility. The 100-pin package requires a corresponding 100-pin PCB footprint and careful escape routing around all perimeter leads. This product page combines manufacturer specifications, package details, search-oriented technical questions, application guidance, and verified same-footprint alternatives. It also identifies lifecycle constraints and organizes practical USB controller design considerations that engineers can apply when planning firmware, PCB layout, and product longevity.

RFQ پەیوەندی
CY7C68014A-100AXC - 24MHz USB 2.0 Controller | Infineon
CY7C68014A-100AXC

CY7C68014A-100AXC - 24MHz USB 2.0 Controller | Infineon

Infineon Technologies CY7C68014A-100AXC is an 8-bit 8051 EZ-USB FX2LP high-speed USB 2.0 peripheral controller with a 24 MHz clock, 16 KB RAM, 16 KB program memory, and a 100-pin LQFP package. It operates from a 3 V to 3.6 V supply and is designed for USB peripherals requiring programmable data acquisition, endpoint control, and direct USB bus interfacing. An EZ-USB FX2LP is an application-specific USB microcontroller that combines an enhanced 8051-compatible core with high-speed USB 2.0 device hardware. Within the semiconductor hierarchy, it is a USB interface controller and embedded microcontroller that sits above general-purpose microcontrollers while providing dedicated peripheral connectivity without a separate USB interface IC. The CY7C68014A-100AXC provides a 24 MHz operating clock, 16 KB of RAM, and 16 KB of program storage. Its high-speed USB 2.0 interface supports peripheral designs such as data acquisition equipment, printers, scanners, industrial interfaces, and test systems. The 100-pin LQFP provides a higher pin count than smaller FX2LP packages and supports expanded external connectivity. The controller's integrated USB engine manages low- and full-speed device transactions while its 8051-compatible processor executes firmware that controls endpoint buffers and transfers. Firmware determines the USB descriptors, endpoint behavior, and application protocol. This combination allows a single controller to implement a vendor-specific peripheral rather than requiring a separate host-side interface or discrete USB transceiver. Typical applications include high-speed test and measurement adapters, data loggers, industrial acquisition modules, printers, scanners, and USB-to-protocol bridges. Its 16 KB RAM and 16 KB program memory are particularly useful for buffering acquisition data and implementing moderate protocol-processing workloads in a compact embedded USB peripheral. Circuit design should begin with the manufacturer pin description table and recommended USB routing layout. The 3 V to 3.6 V operating range requires careful regulator selection, while USB signal routing should minimize trace length and discontinuities. Firmware must also provide valid descriptors and test each supported endpoint with the intended USB host and transfer conditions. This page combines device-specific electrical information, application guidance, package details, replacement analysis, and design notes to support faster component selection and PCB implementation. It also identifies the limitations of directly substituting packages or controller families without validating pin functions and USB behavior.

RFQ پەیوەندی
CY7C68015A-56PVXC - Low-Power USB 2.0 Controller | Infineon
CY7C68015A-56PVXC

CY7C68015A-56PVXC - Low-Power USB 2.0 Controller | Infineon

The Infineon CY7C68015A-56PVXC is an EZ-USB FX2LP low-power USB 2.0 peripheral controller with extra GPIO and communication capability, supplied in a 56-pin SSOP package. It is designed for USB peripheral applications that require high-speed USB connectivity, flexible data transfer, and programmable general-purpose I/O. The device family combines a USB interface controller with an embedded 8051-compatible core, internal RAM, and firmware-programmable endpoint architecture, allowing peripheral designers to implement custom USB protocols, data acquisition, control, and data-processing functions without a separate external processor. An EZ-USB FX2LP controller is a USB interface IC and an application-specific microcontroller. It belongs to the broader hierarchy of interface ICs, USB controllers, peripheral controllers, embedded microcontrollers, and semiconductors. Unlike a conventional fixed-function USB transceiver, the FX2LP architecture can divide USB traffic among multiple endpoint buffers, support control, bulk, and interrupt transfers, and connect external parallel data buses to the USB host through a deterministic, firmware-controlled protocol. The CY7C68015A is positioned as the low-power member of the EZ-USB family, with additional GPIO and communication features intended for non-battery-powered applications. USB 2.0 high-speed operation, internal endpoint buffering, and programmable firmware make the controller suitable for data acquisition systems, test equipment, industrial peripherals, communications equipment, and custom USB bridges. The 56-pin SSOP package provides a practical option for compact board designs requiring a high pin count and external peripheral connectivity. Engineering designs should pay close attention to USB signal routing, crystal and clock requirements, supply decoupling, firmware initialization, and endpoint memory allocation. The SSOP footprint has fine lead pitch and requires a careful PCB layout with short differential USB traces, continuous reference planes, and minimized stub lengths. Power sequencing, ground-plane continuity, and proper crystal loading are equally important for reliable enumeration across multiple host environments. This product page combines manufacturer-oriented device information, distributor listings, family cross-reference results, and application-specific engineering guidance. It emphasizes the role of the CY7C68015A-56PVXC as a configurable USB 2.0 peripheral controller rather than presenting the device merely as a generic interface IC. Buyers should compare the exact package suffix, firmware compatibility, electrical requirements, and USB behavior of any replacement before committing to a drop-in substitution.

RFQ پەیوەندی
CY7C68300A-56PVC - USB 2.0 to ATA Bridge | Infineon
CY7C68300A-56PVC

CY7C68300A-56PVC - USB 2.0 to ATA Bridge | Infineon

Infineon Technologies CY7C68300A-56PVC is a USB 2.0 to ATA/ATAPI interface controller with 56 pins, a 3.3 V supply, and a 56-SSOP package. It bridges a USB host connection with legacy ATA storage, providing a practical migration path for embedded systems that must retain parallel ATA storage support. The device is identified as an EZ-USB AT2 USB 2.0-to-ATA bridge in the available manufacturer-linked data. A USB-to-ATA bridge is an interface controller that translates USB traffic into ATA commands and data transfers. Within the product hierarchy, it is a USB interface bridge, then a storage interface controller, then an integrated circuit and semiconductor. This device is particularly relevant to legacy embedded platforms, industrial equipment, and storage peripherals designed around the ATA/ATAPI command set before USB mass-storage became dominant. The available specifications identify USB 2.0 on the host side, ATA and ATAPI support on the storage side, a 3.3 V supply, and a 56-pin SSOP package. The operating-temperature range reported by the distributor data is 0°C to 70°C, placing the specified device in a commercial-temperature environment. These characteristics make the controller suitable for USB-to-ATA adapters, embedded storage subsystems, and equipment requiring compatibility with existing ATA/ATAPI storage peripherals. The controller is intended to absorb protocol conversion between the USB host domain and the parallel ATA device domain. This separation allows a USB-capable processor or embedded host to manage removable or fixed ATA storage without implementing the ATA electrical interface directly. System designers must still validate command support, media compatibility, power sequencing, and cable or connector behavior in the final equipment. Typical implementations include USB storage adapters, embedded data-acquisition systems, industrial control equipment, and legacy computing platforms being extended with USB connectivity. The 56-SSOP package offers a high pin count for external interface, power, control, and data connections, but it requires careful high-density PCB layout and appropriate connector signal-integrity practices. A primary design consideration is that USB and ATA are both sensitive to voltage, timing, and signal-integrity requirements. Validate input and output capacitance, cable behavior, pull-up and pull-down networks, supply sequencing, ground return paths, and enclosure or shield termination against the manufacturer datasheet before production. This page consolidates the verified distributor data, strict drop-in candidates, comparison parameters, and application guidance into an engineering-focused purchasing reference.

RFQ پەیوەندی
CY7C68300A-56PVXC USB 2.0 ATA Bridge | Infineon
CY7C68300A-56PVXC

CY7C68300A-56PVXC USB 2.0 ATA Bridge | Infineon

The Infineon Technologies CY7C68300A-56PVXC is a fixed-function USB 2.0 to ATA or ATAPI bridge packaged in a 56-pin SSOP. It connects one USB port with one ATA- or ATAPI-based mass-storage device port and implements the USB Mass Storage Class Bulk-Only Transport specification. The device is intended for self-powered USB storage equipment. Its USB 2.0 interface, dedicated ATA/ATAPI port, and fixed-function architecture make the CY7C68300A-56PVXC suitable for external storage enclosures, backup appliances, archival systems, and embedded mass-storage products. The -56PVXC ordering code identifies the 56-SSOP package option, while the A version denotes the associated CY7C68300A product family. A USB-to-ATA bridge is an interface controller that allows a USB host to communicate with a conventional parallel ATA or ATAPI storage device. Within the broader hierarchy, it is a USB interface controller, then a mass-storage interface IC, then a peripheral interface integrated circuit. This fixed-function category differs from a software-programmable USB controller: the bridge performs the USB mass-storage protocol conversion directly, reducing the host-side processing required for a compliant storage transfer. The principal device characteristics are a USB 2.0 host connection, a dedicated ATA/ATAPI mass-storage connection, Mass Storage Class Bulk-Only Transport support, a 56-SSOP package, and operation in self-powered systems. Because it bridges USB to a parallel ATA device rather than directly driving a flash-based device, the design must also account for ATA signal integrity, connector pin assignment, cable or enclosure geometry, and power-supply capacity. The bridge consolidates these host-interface and mass-storage functions into one fixed-function controller. Functionally, the CY7C68300A implements the command and data-path translation required for a USB host to exchange Bulk-Only Transport data with an ATA or ATAPI device. The USB side provides the external computer interface, while the ATA side communicates with the internal storage mechanism. This separation allows an existing ATA-based drive design to be reused in a USB enclosure, provided that the enclosure supplies adequate power, USB signaling, ATA wiring, and mechanical support. Typical implementations include USB-to-IDE storage bridges, external hard-drive enclosures, portable backup appliances, media-copy systems, and industrial data-capture equipment with local storage. In these systems, the bridge can be placed directly between the USB connector and the ATA device connector, simplifying firmware requirements on the storage controller. Designers should also consider whether a direct USB-to-SATA interface would be more appropriate when the mechanical enclosure is designed specifically for SATA devices rather than legacy ATA connectors. For layout, follow the pin-description table and reference layout in the manufacturer datasheet for the 56-SSOP footprint, signal routing, and decoupling. Pay particular attention to USB differential pair routing, ATA signal integrity, ground-return paths, and power-supply isolation between the USB and drive domains. Prototype the interface with the intended enclosure, cable, and storage device, and verify enumeration and sustained transfer behavior before releasing the PCB. This page consolidates the manufacturer datasheet information, distributor catalog records, package details, protocol coverage, and practical interface-design guidance for engineers evaluating the CY7C68300A-56PVXC as a USB 2.0 mass-storage interface solution.

RFQ پەیوەندی
CY7C68300B-56LFXC - USB 2.0 to ATA Bridge | Infineon
CY7C68300B-56LFXC

CY7C68300B-56LFXC - USB 2.0 to ATA Bridge | Infineon

Infineon Technologies CY7C68300B-56LFXC is a fixed-function EZ-USB AT2LP USB 2.0 to ATA/ATAPI bridge controller operating from 3.3 V, with support for data rates up to 480 Mbps. The device is packaged in a 56-pin QFN with exposed pad, measuring 8 x 8 mm, and is intended for USB peripheral, external storage, CompactFlash, and ATA interface applications. A USB-to-ATA bridge is an interface controller that translates transactions between a USB host and an ATA or ATAPI storage device. Within the interface-controller hierarchy, the CY7C68300B provides a fixed-function bridge rather than a software-programmable USB peripheral controller. It supports one USB port and one or two ATA/ATAPI devices, allowing portable storage, card-reader, and legacy embedded-storage designs to use a common USB connection. Key features include full-speed and high-speed USB 2.0 operation, ATA and ATAPI interfacing, CompactFlash support, and a low-power designation. The bridge can place its ATA interface into a high-impedance state so that the ATA bus can be shared with another controller, such as an IEEE 1394 storage controller. The 56-QFN exposed-pad construction also supports compact PCB layouts while providing a thermal connection to the board. The fixed-function architecture simplifies firmware and host-driver integration because the controller does not depend on a general-purpose microcontroller core. USB signaling is handled alongside ATA/ATAPI protocol conversion within one bridge controller. The 480 Mbps interface capability is suitable for external storage workloads, while the support for one or two ATA devices expands design flexibility for multi-drive peripherals. Typical uses include USB desktop hard-drive enclosures, CompactFlash readers, dual-ATA storage appliances, industrial data-acquisition equipment, and legacy embedded systems that need a USB-to-ATA interface. In a desktop enclosure, the USB connector feeds the controller and the controller interfaces directly with the storage device’s ATA signals. A design requiring bus sharing can use the available Hi-Z behavior during alternate-controller operation. A key design consideration is package footprint and exposed-pad layout. The 8 x 8 mm QFN requires a land pattern matching the 56-pin package, and the exposed thermal pad should be connected according to the manufacturer’s recommended land-pattern guidance. Keep USB and ATA routing away from sensitive analog sections, and observe the signal-integrity and decoupling practices shown in the manufacturer datasheet. This page combines the verified device identity, USB and ATA interface capabilities, package information, drop-in alternatives, comparison data, and practical implementation guidance to support engineering selection, PCB design, sourcing, and legacy product maintenance.

RFQ پەیوەندی
CY7C68300B-56PVXC USB 2.0 ATA Bridge | Infineon
CY7C68300B-56PVXC

CY7C68300B-56PVXC USB 2.0 ATA Bridge | Infineon

The Infineon Technologies CY7C68300B-56PVXC is an EZ-USB AT2LP USB 2.0 to ATA/ATAPI bridge controller with a 3.15 V to 3.45 V operating supply range, 50 mA supply current, and a 56-pin SSOP package. It implements a fixed-function bridge between one USB port and one ATA or ATAPI device, with support for CompactFlash. The device is listed as obsolete, so it is primarily relevant to maintenance, repair, and legacy equipment designs. A USB-to-ATA bridge is an interface controller that translates USB traffic into ATA and ATAPI commands, allowing storage devices designed for an embedded IDE or flash interface to connect through a USB host. Within the power-management IC hierarchy, this device belongs to the interface-controller and USB-bridge class rather than a voltage regulator or switching converter. It provides the protocol and electrical interface between a USB 2.0 host and a directly attached ATA/ATAPI storage device. The principal features include USB 2.0 operation, fixed-function ATA and ATAPI bridging, one-device support, and CompactFlash compatibility. The ATA interface can also be placed in a high-impedance state, allowing the bus to be shared with another controller such as an IEEE 1394 device. This Hi-Z capability is useful in legacy portable systems where an internal storage bus must be arbitrated between multiple controllers. The 56-pin SSOP package is a legacy surface-mount format suited to established controller boards and adapter hardware. The CY7C68300B/CY7C68301B device family provides a USB-to-ATA/ATAPI interface for embedded storage designs. Its 3.3 V-class operating range and 50 mA supply-current figure make it appropriate for systems already operating around 3.3 V. Unlike a general-purpose USB host controller, the EZ-USB AT2LP implementation is a fixed-function bridge, which simplifies host software support while limiting configuration flexibility compared with a programmable USB controller. Typical applications include legacy industrial data-acquisition equipment, compact embedded storage systems, legacy portable computers, and USB-to-ATA or CompactFlash adapter boards. The bridge is particularly appropriate when an existing ATA or ATAPI device must be retained but exposed to a modern host through USB. Its Hi-Z ATA interface also supports designs in which another controller, including an IEEE 1394 interface, must share access to the same storage bus. Designers should preserve the original 56-pin SSOP footprint, supply decoupling, and ATA signal routing when replacing an existing board. Because the product is obsolete, validate the ATA protocol behavior, BIOS or operating-system driver support, connector wiring, and USB high-speed signal integrity in the complete system. A footprint match alone does not guarantee that replacement USB enumeration, power management, or storage compatibility will be identical. This page combines the device specifications, lifecycle status, sourcing guidance, and drop-in alternatives for the CY7C68300B-56PVXC. It also provides application-specific engineering context for USB-to-ATA bridges, CompactFlash systems, and legacy embedded storage controllers.

RFQ پەیوەندی
CY7C68300C-100AXC - USB 2.0 to ATA Bridge | Infineon
CY7C68300C-100AXC

CY7C68300C-100AXC - USB 2.0 to ATA Bridge | Infineon

The Infineon Technologies CY7C68300C-100AXC is an EZ-USB AT2LP USB 2.0 to ATA/ATAPI bridge controller housed in a 100-pin TQFP package measuring 14 mm by 20 mm. It provides a USB 2.0 host-facing interface, support for one ATA/ATAPI device, and CompactFlash support for portable storage designs. A USB-to-ATA bridge is an interface controller that translates USB transactions into ATA and ATAPI commands used by conventional storage devices. Within the semiconductor hierarchy, this device combines a USB device controller, ATA/ATAPI host interface, embedded firmware, and USB connectivity. Its primary role is to let a USB-equipped computer or embedded host use storage peripherals that originally use the parallel ATA interface. The bridge supports one ATA or ATAPI device and CompactFlash media through its storage-side interface. It also supports board-level manufacturing testing through the USB interface, reducing the need for a separate fixture interface during production. The ATA interface can be placed in a high-impedance state, allowing the bus to be shared with another controller such as an IEEE 1394 controller. The USB side supports USB 2.0 operation, making the controller suitable for systems requiring a standards-compliant USB connection to CompactFlash or ATA-based storage. The 100-pin TQFP package provides a substantial number of interface, control, power, and ground connections, supporting both host-side USB signaling and the wider ATA bus. Typical applications include CompactFlash card readers, USB-to-IDE adapters, embedded data loggers, industrial storage gateways, test equipment, and legacy computer upgrades. The integrated USB manufacturing-test capability is particularly useful in high-volume production because it allows configuration and functional checks through the same USB connection used during normal operation. PCB design requires careful routing of the ATA and ATAPI signals, including the differential USB pair and associated signal-integrity considerations. The device should be placed close to its connectors and storage-interface circuitry, with short return paths and controlled impedance routing for the USB differential pair. Power and ground-pin distribution should follow the manufacturer’s package and reference-layout guidance. This page combines the device identity, package details, interface capabilities, replacement guidance, comparison criteria, and practical implementation considerations needed to evaluate the CY7C68300C-100AXC for a USB storage interface. Use the manufacturer datasheet pin-description table and recommended layout when assigning every PCB connection.

RFQ پەیوەندی
CY7C68300C-56LFXC - USB 2.0 ATA Bridge | Infineon
CY7C68300C-56LFXC

CY7C68300C-56LFXC - USB 2.0 ATA Bridge | Infineon

The Infineon Technologies CY7C68300C-56LFXC is a USB 2.0-to-ATA/ATAPI bridge controller for transferring data between a USB host and an ATA storage device. It operates from a 3.15 V to 3.45 V supply, has a listed operating current of 50 mA, and is packaged in a 56-QFN with exposed pad measuring 8 mm by 8 mm. The device is identified as an EZ-USB AT2LP USB 2.0 to ATA/ATAPI bridge. A USB-to-ATA bridge is an interface controller that bridges the protocol and electrical differences between USB and ATA storage. USB provides a host-controlled peripheral connection, while ATA/ATAPI is used with compatible storage devices. This bridge controller therefore belongs to the broader USB interface IC and data-transfer controller hierarchy, reducing the need for a host system to implement the storage-facing protocol directly. The principal specifications are its USB 2.0 interface support, ATA/ATAPI bridge function, 3.15 V to 3.45 V operating supply range, 50 mA operating supply current, and 56-QFN-EP surface-mount package. The compact 8 mm by 8 mm outline supports space-conscious USB storage equipment, while the exposed pad provides the thermal and electrical connection required by the package construction. The C revision is associated with the EZ-USB AT2LP family of USB-to-ATA storage controllers. The available product records identify the same USB 2.0 ATA-interface function for CY7C68300C and CY7C68301C, while CY7C68300B is described as a low-power USB peripheral variant. These family comparisons are useful for revision and sourcing reviews, but detailed differences in clocking, signaling, and feature support should be checked against the relevant manufacturer datasheet before a replacement is approved. Typical applications include USB-connected hard-disk and removable-storage systems, ATA/ATAPI storage adapters, embedded data-logging equipment, and legacy computer peripherals that require a USB 2.0 storage interface. The 3.15 V to 3.45 V operating range is suitable for regulated 3.3 V system rails, allowing the bridge to share a conventional 3.3 V supply architecture when the complete system design permits it. The 56-QFN exposed-pad footprint requires careful PCB layout and thermal design. Place the device’s decoupling capacitors close to the supply pins, provide a low-impedance ground connection, and follow the manufacturer’s exposed-pad land-pattern and assembly guidance. Because the recorded operating temperature range is 0 °C to 70 °C, verify the complete enclosure temperature and thermal rise before using the part in industrial or automotive environments. This product record combines the USB 2.0 ATA-bridge identity, package data, lifecycle information, cross-reference candidates, and practical design considerations needed for legacy-system review. Because the component is recorded as obsolete, engineers should confirm availability, inspect the original ATA/ATAPI interface requirements, and verify every pin and timing constraint against the manufacturer datasheet before beginning a new design.

RFQ پەیوەندی
CY7C68300C-56LTXC USB 2.0 ATA Bridge | Infineon
CY7C68300C-56LTXC

CY7C68300C-56LTXC USB 2.0 ATA Bridge | Infineon

Infineon Technologies CY7C68300C-56LTXC is a USB 2.0 to ATA/ATAPI bridge controller operating from a 3.3 V supply in a 56-pin QFN package measuring 8 mm by 8 mm. The device provides a full-speed/high-speed USB 2.0 host-to-ATA interface for portable storage, card-reader, and embedded storage systems. Its 56-QFN construction includes an exposed pad for improved package-level heat dissipation, while the compact 8 mm by 8 mm footprint supports space-constrained portable equipment. A USB-to-ATA bridge is an interface controller that translates USB transactions into ATA and ATAPI commands. It sits between a USB host and a disk drive or storage subsystem, allowing equipment that lacks a native ATA interface to communicate with conventional mass-storage devices. Within the hierarchy of USB interface controllers, the CY7C68300 family belongs to the broader category of USB-to-storage bridge controllers and mass-storage interface semiconductors. The CY7C68300C-56LTXC supports USB 2.0 full-speed and high-speed operation, ATA/ATAPI bridging, and a 3.3 V supply. The commercial-temperature ordering code corresponds to an operating range of 0°C to 70°C. The 56-pin QFN package exposes a high number of ATA data, control, and power connections while maintaining a compact board area suitable for portable storage products. The exposed thermal pad also provides a direct heat-transfer path into the PCB copper plane. Typical uses include USB external enclosures, personal-media players, portable disk systems, industrial data-acquisition equipment, and embedded ATA storage. The bridge is most appropriate when an existing USB host must communicate with an ATA or ATAPI peripheral through a cable rather than mounting the drive directly on a host bus. Its design converts a general-purpose USB connection into the command and data protocol expected by the storage device. Circuit design should preserve the voltage, signal-integrity, and decoupling requirements specified by the manufacturer datasheet. The ATA interface is a high-speed parallel bus, so controlled impedance routing, short point-to-point connections, solid ground-plane continuity, and careful separation between sensitive supply paths and fast data lines are essential. Place the required input, output, and interface capacitors close to their associated pins, and connect the exposed pad to the recommended ground-plane construction. This product page combines the exact ordering information, package details, and verified listing links for CY7C68300C-56LTXC with practical USB-to-ATA implementation guidance. It also identifies the confirmed same-family alternatives that can support sourcing evaluation while emphasizing that firmware support, ATA protocol details, exposed-pad layout, and signal timing must be checked before any replacement is approved.

RFQ پەیوەندی
CY7C68300C-56PVXC USB 2.0 ATA Bridge | Infineon
CY7C68300C-56PVXC

CY7C68300C-56PVXC USB 2.0 ATA Bridge | Infineon

Infineon CY7C68300C-56PVXC is a 3.3 V USB 2.0 to ATA/ATAPI bridge controller designed for external storage applications in a 56-pin SSOP package. The device supports Full Speed and High Speed USB operation and bridges USB connectivity to an ATA/ATAPI storage interface. A USB-to-ATA bridge is an interface controller that allows a USB host to communicate with an ATA disk or optical-drive subsystem through a USB connection. It belongs to the USB interface bridge, peripheral controller, and interface IC hierarchy. The CY7C68300C-56PVXC combines USB device-controller and ATA interface functions in one package, reducing the component count required by legacy USB storage adapters and embedded storage appliances. The principal features include USB 2.0 compatibility, Full Speed and High Speed operation, ATA and ATAPI support, and a 3.3 V supply. It is intended for applications requiring a conventional USB connection to an ATA storage device. The 56-pin surface-mount package supports compact external-drive and industrial-storage designs, although its relatively large lead count requires careful PCB routing and adequate pin clearance. The controller is associated with the EZ-USB family and provides a dedicated interface between the USB system and ATA/ATAPI peripherals. System designers must account for the voltage levels, signal timing, connector requirements, and enumeration behavior of the complete USB storage system rather than treating the bridge as a generic data connector. Typical uses include USB-to-IDE adapters, legacy external storage enclosures, backup appliances, industrial data-retention equipment, and embedded systems that retain an ATA interface while adding USB connectivity. For these applications, the IC can reduce parallel-ATA cabling by presenting a USB-facing port to a host computer while the controller handles the ATA-side protocol translation. PCB implementation requires placing the controller close to the USB connector, maintaining the required USB signal topology, and providing clean 3.3 V power with appropriate decoupling. The ATA side should be routed according to the manufacturer's reference layout, with attention to signal integrity, ground continuity, and connector strain relief. Firmware and operating-system support must also be validated for the intended ATA device class. This product page combines the device identity, electrical and packaging specifications, verified cross-reference candidates, application guidance, and practical implementation notes. It also distinguishes the confirmed same-family revision from unverified substitutes, helping engineers avoid assuming that a similar USB bridge is electrically and pin compatible.

RFQ پەیوەندی
CY7C68301B-56LFXC - USB 2.0 ATA Bridge | Infineon
CY7C68301B-56LFXC

CY7C68301B-56LFXC - USB 2.0 ATA Bridge | Infineon

The Infineon Technologies CY7C68301B-56LFXC is a USB 2.0 to ATA/ATAPI interface bridge housed in a 56-pin QFN package measuring 8 mm by 8 mm. It provides the bridge function between a USB 2.0 host interface and an ATA or ATAPI storage device, supporting the transfer of storage commands and data across the two interfaces. A USB-to-ATA bridge is an interface controller that translates USB transactions into ATA commands and returns ATA responses through USB. These devices are used to connect USB storage systems to embedded computers, industrial equipment, test systems, and legacy storage peripherals. The CY7C68301B belongs to the EZ-USB AT2LP product family, combining a full-speed or high-speed USB bridge with ATA interface logic in one integrated circuit. The device's defining specifications are its USB 2.0 ATA bridge function, 56-QFN package, and 8 mm by 8 mm body size. A comparison associated with the part lists an operating-voltage range of 3.15 V to 3.45 V and a temperature grade beginning at 0 degrees Celsius. The QFN package supports compact PCB layouts while exposing the bridge's power, USB, ATA, and control connections through a high pin count. The CY7C68301B is intended for systems that need a dedicated USB storage interface rather than a general-purpose host controller. Its USB side connects to an external host, while the ATA side connects to compatible storage devices. The bridge architecture allows existing ATA/ATAPI storage subsystems to be accessed through a USB connection without implementing the full storage stack in host firmware. Typical uses include USB-connected embedded storage, industrial data-acquisition equipment, legacy disk systems, test and measurement fixtures, and portable computing products. System designers should match the power rails, USB signaling requirements, ATA connector arrangement, clocking, and firmware configuration to the manufacturer datasheet before laying out the PCB. Because the package uses a dense 56-pin QFN footprint, PCB planning requires careful escape routing and uninterrupted ground-plane placement. The manufacturer datasheet should be used for the authoritative pin assignments, exposed-pad connection, decoupling requirements, clock source, and ATA interface details. This page also compares related EZ-USB AT2LP devices and highlights where a different bridge variant may require design review. For a new USB-to-ATA design, the CY7C68301B is most relevant when its documented USB, ATA, voltage, temperature, and package requirements match the target system. For an existing board, verify that the footprint, exposed pad, signal functions, firmware configuration, and electrical limits remain unchanged before considering a related bridge as a replacement.

RFQ پەیوەندی
CY7C68301B-56PVXC USB 2.0 ATA Bridge | Infineon
CY7C68301B-56PVXC

CY7C68301B-56PVXC USB 2.0 ATA Bridge | Infineon

Infineon Technologies CY7C68301B-56PVXC is a USB 2.0 to ATA/ATAPI mass-storage bridge controller in a 56-pin SSOP package. The device bridges USB storage connectivity to ATA/ATAPI-compatible drives and is associated with battery-powered portable-storage designs. It operates from a 3.3 V supply identified by the product documentation, while the associated datasheet search record identifies a 3.15 V to 3.45 V operating range. A USB-to-ATA bridge is a controller within the USB interface-controller and mass-storage interface hierarchy. Its purpose is to translate USB host transactions into ATA or ATAPI commands for compatible storage devices. This USB-to-ATA bridge category falls under interface ICs, semiconductor controllers, and data-transfer interface devices. Such controllers are used to connect external storage hardware to a USB-capable computer, embedded system, or portable electronics platform without requiring a conventional internal storage interface. The CY7C68301B family supports USB 2.0 mass-storage applications and is offered in lead-free 56-pin SSOP and 56-pin QFN package options. The CY7C68301B-56PVXC is the SSOP configuration, while the separate -56LFXC ordering code identifies a QFN package. Its USB 2.0 ATA-interface positioning makes it suitable for portable and embedded storage equipment requiring a host-side USB connection to an ATA or ATAPI-compatible drive. The controller is intended for ATA/ATAPI-6 compliant mass-storage devices, including portable storage applications associated with battery-powered designs. A typical system places the bridge between a USB connector and an ATA-compatible drive interface, allowing a USB host to enumerate and transfer data to the attached storage device. The 56-pin SSOP package supports compact, surface-mount assembly while providing enough pins for the USB, ATA, storage-interface, clock, power, and configuration functions defined by the family. Potential uses include USB-connected portable drives, card-reader systems, embedded data loggers, industrial storage equipment, and legacy ATA storage adapters. Because it targets ATA and ATAPI storage rather than modern SATA or NVMe interfaces, system compatibility must be confirmed before deployment. The bridge should also be checked against the host operating system, drive interface, power requirements, and required USB enumeration behavior. A key design consideration is that the -56PVXC and -56LFXC suffixes identify different package constructions rather than electrically identical drop-in land patterns. Confirm the mechanical drawing, pin assignment, PCB footprint, and exposed or non-exposed package details before schematic capture. Review the manufacturer pin-description table when assigning ATA signals, USB data lines, control inputs, and supply pins. This page consolidates the verified USB 2.0 ATA-interface description, package distinctions, related controller options, and design guidance into an engineer-focused component reference. It also distinguishes same-footprint family alternatives from QFN variants and separates documented specifications from parameters that still require confirmation against the manufacturer datasheet.

RFQ پەیوەندی
CY7C68301C-56LFXC - USB 2.0 ATA Bridge | Cypress Semiconductor
CY7C68301C-56LFXC

CY7C68301C-56LFXC - USB 2.0 ATA Bridge | Cypress Semiconductor

The Cypress Semiconductor CY7C68301C-56LFXC is a USB 2.0 high-speed peripheral controller and USB-to-ATA/ATAPI bridge packaged in a 56-pin VFQFN measuring 8 x 8 mm. It is intended to provide a USB interface for storage devices that use the ATA or ATAPI command set, allowing legacy storage peripherals to communicate through a USB 2.0 host. A USB-to-ATA bridge is an interface controller that translates USB transactions into ATA commands and transfers data between a USB host and an ATA-compatible storage device. Within the interface-controller hierarchy, this device belongs to the USB high-speed peripheral-controller class and bridges USB connectivity with the ATA storage ecosystem. The bridge can therefore be used in storage peripherals, adapters, embedded systems, and legacy-device modernization designs. The principal identified characteristics are USB 2.0 high-speed operation, a USB-to-ATA/ATAPI bridge function, and a compact 56-VFQFN package with an exposed pad. Its surface-mount package supports high-density PCB layouts while providing a thermal and electrical connection between the device and the board. The exposed-pad construction requires careful PCB layout and thermal management to achieve reliable operation without excessive junction temperature. This controller is associated with the EZ-USB AT2LP family of USB-to-ATA solutions. Its position between the USB host and an ATA device means that system designers must account for USB enumeration, ATA signaling, storage timing, power management, and connector requirements. The device is therefore more specialized than a general-purpose USB hub or serial interface controller: it is intended specifically for bridging USB connectivity to ATA or ATAPI storage functions. Typical applications include USB external-storage enclosures, USB-to-ATA storage adapters, embedded data-storage systems, industrial equipment with legacy ATA peripherals, and compact industrial or retrofitted storage products. In these applications, the CY7C68301C-56LFXC centralizes protocol translation while allowing the storage subsystem to retain the ATA command and electrical architecture used by legacy devices. For PCB implementation, follow the manufacturer's pin-assignment and reference-layout guidance exactly. Place the exposed pad on a continuous ground plane, connect USB and ATA differential pairs with controlled impedance and matched routing, and provide local decoupling at the supply pins. Keep high-current and high-speed routing areas separated where practical, and verify the complete interface with USB compliance, signal-integrity, and power-integrity testing. This product summary combines the device identity, USB-to-ATA function, package information, sourcing context, and practical PCB guidance. It also distinguishes the identified same-package family references so engineers can evaluate migration options while checking device revisions, electrical ratings, firmware requirements, and pin-level compatibility before making a replacement.

RFQ پەیوەندی
CY7C68301C-56LTXC - USB 2.0 ATA Bridge | Infineon
CY7C68301C-56LTXC

CY7C68301C-56LTXC - USB 2.0 ATA Bridge | Infineon

The Infineon Technologies CY7C68301C-56LTXC is a USB 2.0 interface bridge for connecting an ATA or ATAPI device through a USB port. It operates from a 3.3 V supply, supports bulk, interrupt, and isochronous data transfers, and provides seven endpoints. The device is housed in a 56-pin QFN package measuring 8 mm by 8 mm, with an exposed pad identified in product documentation. A USB-to-ATA bridge is an interface controller that translates USB host transactions into ATA and ATAPI commands used by hard-disk drives, optical storage, and related peripherals. This device belongs to the USB interface controller hierarchy, which connects USB host controllers to storage media and provides the electrical and protocol translation required for removable or externally connected storage systems. The principal feature set includes USB 2.0 operation, ATA and ATAPI support, seven endpoints, and three supported transfer types. Bulk transfers suit disk data movement, interrupt transfers support status or control traffic, and isochronous transfers provide time-sensitive channels. The 3.3 V operating supply and compact 8 mm by 8 mm QFN package support space-constrained external storage equipment. The AT2LP implementation is intended for high-speed USB storage interfaces. Its endpoint structure provides multiple channels for command, status, and data traffic between the USB host and an attached ATA device. Because the controller handles protocol translation, the storage subsystem can use USB connectivity without implementing the USB-to-ATA transaction layer directly. Typical uses include USB-to-IDE adapters, external storage enclosures, compact disk systems, and legacy ATA equipment connected to a modern USB host. The named CY4615B development kit is associated with the device for design evaluation. System integration also requires careful USB routing, power-supply design, ATA signal conditioning, and thermal management around the exposed-pad package. For a new layout, route USB and ATA differential pairs on controlled-impedance layers, keep bypass capacitors close to the supply pins, and provide uninterrupted ground references around the package. Confirm voltage levels, connector orientation, power-source requirements, and ATA master or slave configuration against the manufacturer datasheet before releasing production hardware. This page combines the device specifications, protocol capabilities, application guidance, package information, and documented family comparisons needed to evaluate the CY7C68301C-56LTXC. The alternatives section is limited to same-package family candidates identified through cross-reference records, and each substitution still requires firmware, electrical, and footprint validation before use.

RFQ پەیوەندی
CY7C68301C-56PVXC USB 2.0 ATA Bridge | Infineon
CY7C68301C-56PVXC

CY7C68301C-56PVXC USB 2.0 ATA Bridge | Infineon

The Infineon Technologies CY7C68301C-56PVXC is a USB 2.0 ATA/ATAPI bridge controller packaged as a 56-SSOP device. It provides the interface between a USB 2.0 host and an ATA/ATAPI storage device, supporting the transfer of USB high-speed peripheral data to the ATA storage domain. The controller is identified as an EZ-USB AT2LP USB 2.0 to ATA/ATAPI bridge in the manufacturer documentation. A USB-to-ATA bridge is an interface controller within the broader semiconductor hierarchy of USB interface ICs, interface controllers, and system connectivity devices. Its role is to translate commands and data between the packet-based Universal Serial Bus architecture and the parallel command and data conventions used by ATA storage devices. This allows a storage subsystem using a legacy ATA/ATAPI connection to be accessed through a USB 2.0 host interface. The verified product information identifies USB 2.0 support, ATA/ATAPI bridging, and high-speed USB peripheral operation as the principal functional characteristics. The ordering code CY7C68301C-56PVXC denotes a 56-lead SSOP package. The suffix also distinguishes the device revision, temperature and qualification options, and shipping format, so a replacement should be selected by the complete ordering code rather than by the base device name alone. Technically, the bridge is designed for systems that need protocol conversion and USB connectivity for an ATA or ATAPI device. Its implementation includes USB-side and ATA-side logic, command handling, data transfer paths, and package-level support for the associated storage interface. Because the exact electrical timing, current, voltage, and environmental limits are not stated in the retrieved product records, designers should confirm those values against the manufacturer datasheet before finalizing a power, layout, or signal-integrity design. Typical uses include legacy ATA storage adapters, USB-to-ATA equipment, embedded data acquisition systems, industrial storage controllers, and test equipment that must present an ATA/ATAPI device through USB 2.0. In these systems, the bridge reduces the need for a host to understand ATA electrical signaling and provides a standardized USB connection to the storage peripheral. The primary design consideration is exact replacement compatibility. Board designers should verify the lead count, exposed or routed pins, supply requirements, ATA-side pin assignments, USB routing, crystal or clock requirements, and supported ATA device type against the manufacturer pin description table. Signal-routing and power-layout decisions should not be inferred solely from the family name. This product page consolidates the confirmed USB 2.0 ATA/ATAPI interface information, package identity, source links, comparison candidates, and application guidance. It also separates confirmed facts from electrical details that still require datasheet verification, helping engineers evaluate this legacy bridge without treating generic controller assumptions as part-specific guarantees.

RFQ پەیوەندی
CY7C68310-80AXC USB 2.0 ATA Bridge | Infineon
CY7C68310-80AXC

CY7C68310-80AXC USB 2.0 ATA Bridge | Infineon

The Infineon Technologies CY7C68310-80AXC is a low-power USB 2.0 to ATA/ATAPI bridge integrated circuit with a 2.5 V operating supply identified in the verified results and an 80-pin TQFP package. It is designed to provide a bridge between a USB 2.0 host interface and ATA or ATAPI storage devices, making it suitable for embedded storage adapters, legacy computer peripherals, and systems that need protocol conversion without implementing the complete storage interface in host hardware. The verified sources identify the part as an ISD-300LP Low-Power USB 2.0 to ATA/ATAPI Bridge IC. A USB-to-ATA bridge is an interface controller that translates USB commands and data traffic into ATA/ATAPI commands and electrical signaling. In the device hierarchy, it belongs to interface ICs, then data converters and bus bridges, and finally the broader semiconductor category. The bridge can help preserve investment in storage mechanisms designed around parallel ATA while adding a USB connection for a newer host system. Its low-power designation is important for portable and embedded equipment where USB connectivity must not dominate the system power budget. The available verified data confirms the key identity and package information: CY7C68310-80AXC, USB 2.0, ATA/ATAPI bridge operation, 2.5 V supply information, and an 80-pin TQFP package measuring 12 x 12 mm according to the DigiKey result. The search results also identify the device as an Infineon/Cypress component through distributor and Octopart listings. Detailed electrical limits, transfer-rate values, operating-temperature limits, and timing parameters were not supplied in the verified snippets, so those values must be confirmed from the manufacturer datasheet before a design is released. Typical uses include USB storage adapters, embedded data loggers, industrial equipment with legacy ATA storage, test fixtures, and computer systems that need a controlled bridge to an ATA device. In these applications, the bridge handles USB enumeration and storage-protocol translation while the host operating system presents the storage device through its normal USB mass-storage path. Designers should confirm host compatibility, device-side ATA signaling, power requirements, connector implementation, and operating-system support using the official CY7C68310 documentation. The most important design consideration is interface validation rather than raw substitution. A candidate part must match the 80-pin TQFP footprint, pin functions, supply requirements, USB behavior, ATA/ATAPI timing, and operating system requirements. The verified web results do not establish a qualified pin-to-pin replacement, so substitute parts should not be treated as drop-in without manufacturer documentation. This page distinguishes verified facts from missing technical data and emphasizes datasheet-based review. This product page combines the verified distributor identity, package information, pricing reference, and practical selection context with explicit markers for unavailable electrical specifications. It is intended as an engineering-oriented starting point for sourcing and design review rather than a substitute for the full manufacturer datasheet.

RFQ پەیوەندی
CY7C68320-100AXC - USB 2.0 to ATA Bridge | Infineon
CY7C68320-100AXC

CY7C68320-100AXC - USB 2.0 to ATA Bridge | Infineon

The Infineon Technologies CY7C68320-100AXC is a USB 2.0 to ATA/ATAPI interface bridge controller packaged in a 100-lead LQFP. The device is designed to bridge a USB high-speed host connection to an ATA or ATAPI storage interface, reducing the need for a discrete host-controller and storage-interface implementation. The verified product records identify the device as a USB Bridge with a USB 2.0 ATA interface and a 100-TQFP package measuring 14 x 20 mm. A USB-to-ATA bridge is a storage-interface controller within the broader USB interface-controller and data-conversion IC hierarchy. Its primary role is to translate USB transactions and descriptors into ATA or ATAPI commands, allowing compatible storage equipment to appear as a USB peripheral. This device class is useful when legacy or removable storage interfaces must be connected through a standardized USB high-speed host port. The verified listings identify the CY7C68320-100AXC as a Cypress Semiconductor EZ-USB AT2LP USB 2.0 to ATA/ATAPI bridge. Related listings describe the corresponding CY7C68320C-100AXC as a 100-pin USB-to-ATA bridge, providing confirmation of the interface function, family positioning, and package format. The commercial-grade operating-temperature information listed for the closely identified CY7C68320C-100AXC is 0°C to 70°C, while the exact specification for the non-C target order code remains to be confirmed from its manufacturer datasheet. Architecturally, this controller sits between a USB host and an ATA/ATAPI storage device. USB provides the external connection and enumeration boundary, while ATA commands operate internally through the bridge's ATA-compatible interface. The integration can shorten firmware and hardware development for USB storage products by consolidating protocol handling in a dedicated controller instead of implementing the complete bridge function in a separate microcontroller. Typical use cases include USB-connected external storage, embedded data-logging systems, industrial storage adapters, legacy ATA equipment modernization, and test fixtures that require a USB front end for an ATA peripheral. In each case, system design must still provide the required USB termination, ATA signal routing, storage connector, power architecture, and firmware support for the selected device configuration. The primary design consideration is package verification. Distributor records alternate between CY7C68320-100AXC and CY7C68320C-100AXC, and the available search results do not provide a verified pin-by-pin comparison for every order code. Engineers should therefore confirm the exact MPN, pinout, electrical limits, supported ATA modes, and firmware compatibility against the applicable manufacturer datasheet before releasing a PCB or production order. This page consolidates verified distributor and manufacturer-document discovery records with package-aware selection guidance, practical integration considerations, and an explicit separation of confirmed facts from unresolved data. It is intended to accelerate engineering review while avoiding unsupported claims about lifecycle, pricing, pin assignments, or drop-in substitution.

RFQ پەیوەندی