STMicroelectronics

STF25NM60ND - 600V 21A N-Ch MOSFET TO-220FP | STMicroelectronics

MPN: STF25NM60ND ✓ چالاک
600 V Vdss 21 A Id 0.13 ohm Rds(on) TO-220FP (isolated) Package
لە $1 USD / یەکە
MOQ: 1 |
نرخ نوێکرایەوە: 2026-09-03
نرخی بەکۆمەڵ
بڕ نرخی یەکە کۆی گشتی
1 $1 $1.00
ℹ️ ھەموو نرخەکان بە USD ن

STF25NM60ND گشتی

The STMicroelectronics STF25NM60ND is an N-channel 600 V power MOSFET built on the FDmesh II trench technology, rated for 21 A drain current (at Tc) and 40 W power dissipation in an isolated TO-220FP package. Its typical on-resistance of 0.13 ohm and integrated fast-recovery body diode make it well suited for off-line switched-mode power conversion.

A power MOSFET is a voltage-controlled semiconductor switch used to regulate or convert electrical power. Within the component hierarchy, the STF25NM60ND belongs to the transistor family, specifically the MOSFET (metal-oxide-semiconductor field-effect transistor) class, which sits within the broader category of discrete semiconductors and power management components. Power MOSFETs are the switching elements in SMPS topologies such as flyback, forward, half-bridge and resonant converters.

Key features include the 600 V drain-source breakdown voltage rating for universal-mains rectified-bus applications, FDmesh II process technology that lowers RDS(on) and gate charge for improved efficiency, and the fast-recovery intrinsic body diode (indicated by the D suffix) that reduces reverse-recovery losses in hard-switched topologies such as two-switch forward and LLC converters. The F suffix in the part number denotes the TO-220FP fully molded isolated package, providing 2500 Vrms electrical isolation without an external insulator, simplifying heatsink mounting.

The FDmesh II stripe-trench architecture balances conduction and switching losses, allowing designers to optimize for either low-frequency conduction efficiency or high-frequency switching performance. Low gate charge reduces gate-drive losses, while the rugged body diode withstands avalanche events typical of transformer-leakage-inductance environments.

Typical applications include off-line flyback and forward AC-DC converters for industrial power supplies, PFC pre-regulator stages, motor drive inverter legs for light industrial loads, and high-voltage DC-DC modules for solar and telecom rectifiers.

Design tip: the TO-220FP isolated package has higher thermal resistance than standard TO-220, so verify junction temperature with proper heatsink sizing; drive the gate with a low-impedance driver (e.g., 10 ohm series resistor) to manage EMI from fast switching edges.

جێگرەوەکانی جێگۆڕکێ بۆ STF25NM60ND — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

ئامرازی بەراوردکردنی خێرا — بەشە جێگرەوەکان هەڵبژێرە بۆ بەراوردکردنی لایەن بە لایەن:

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

STF25NM60ND زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Polarity N-Channel
Drain-Source Voltage (VDSS) 600 V
Continuous Drain Current (ID at Tc) 21 A
On-Resistance (RDS(on) typ) 0.13 ohm
Power Dissipation (PD at Tc) 40 W
Technology FDmesh II trench
Body Diode Fast recovery intrinsic
پاکێج TO-220FP (isolated)
جۆری دامەزراندن Through Hole
Isolation Fully molded isolated package (F suffix)
دۆخی RoHS Compliant
Configuration Single MOSFET

ڕێکخستنی پینی STF25NM60ND

TO-220 Package Pinout Diagram TO-220 3-pin vertical mount with tab, JEDEC. 1 2 3 TO-220
پین 1 Gate (G) — Gate control terminal
پین 2 Drain (D) — Connected to heatsink tab, drain terminal
پین 3 Source (S) — Source terminal

ناوچەی کارکردنی سەلامەت

کارکردنی بەردەوامی DC

بەکارهێنانە باوەکان

STF25NM60ND گونجاوە بۆ 3 بەکارھێنانs: بەڕێوەبردنی وزە, کۆنترۆڵی مۆتۆر, ڕووناکی LED.

⚡

بەڕێوەبردنی وزە

گۆڕین و ڕێکخستن لە خولەکانی دابینکردنی وزە بە بەکارهێنانی STF25NM60ND.

⚙️

کۆنترۆڵی مۆتۆر

بەکارخستن و کۆنترۆڵکردنی مۆتۆرەکانی DC/BLDC بە STF25NM60ND.

💡

ڕووناکی LED

بەکارخستنی زنجیرە و کۆمەڵە LEDەکان بە STF25NM60ND.

هیچ پرسیارێکی باو بۆ ئەم بەرهەمە بەردەست نییە.

داتای سەرچاوەی ئەندازیاری بۆ STF25NM60ND — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the STF25NM60ND when you need a 600 V, 21 A N-channel MOSFET with an isolated TO-220FP package for off-line power converters requiring a fast-recovery body diode and no external isolation pad. Choose STP25NM60ND for non-isolated TO-220 mounting with better thermal performance. Choose STB25NM60ND (D2PAK) for surface-mount-friendly boards. Choose STF23NM60ND when slightly lower current (23 A class) suffices at lower cost. For 650 V designs with more margin, consider STF24NM65N. The isolated FP package trades thermal resistance for mounting convenience and isolation.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Unknown
AEC-Q100
بێ قوڕقوشم
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

RoHS compliance per STMicroelectronics product listing; other statuses not stated in provided data.

داتا پشتڕاستکراوەتەوە لە: 2026-08-29 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

STF25NM60ND datasheet PDF STF25NM60ND STMicroelectronics MOSFET STF25NM60ND pinout TO-220FP 600V N-channel MOSFET 21A isolated TO-220FP STF25NM60ND equivalent replacement STF25NM60ND vs STF23NM60ND STF25NM60ND price buy STF25NM60ND flyback converter switch fast body diode 600V MOSFET what replaces STF25NM60ND

پێکهاتە و زاراوە پەیوەندیدارەکان

STMicroelectronics STF25NM60ND STP25NM60ND STB25NM60ND STF23NM60ND STF24NM65N power MOSFET N-channel MOSFET discrete semiconductor FDmesh II TO-220FP TO-220 D2PAK fast recovery body diode RDS(on) 600 V breakdown voltage RoHS off-line SMPS flyback converter PFC
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ