STMicroelectronics
STF25NM60ND - 600V 21A N-Ch MOSFET TO-220FP | STMicroelectronics
MPN: STF25NM60ND ✓ सक्रिय
600 V Vdss
21 A Id
0.13 ohm Rds(on)
TO-220FP (isolated) Package
न्यूनतम ऑर्डर मात्रा: 1 |
STF25NM60ND अवलोकन
The STMicroelectronics STF25NM60ND is an N-channel 600 V power MOSFET built on the FDmesh II trench technology, rated for 21 A drain current (at Tc) and 40 W power dissipation in an isolated TO-220FP package. Its typical on-resistance of 0.13 ohm and integrated fast-recovery body diode make it well suited for off-line switched-mode power conversion.
A power MOSFET is a voltage-controlled semiconductor switch used to regulate or convert electrical power. Within the component hierarchy, the STF25NM60ND belongs to the transistor family, specifically the MOSFET (metal-oxide-semiconductor field-effect transistor) class, which sits within the broader category of discrete semiconductors and power management components. Power MOSFETs are the switching elements in SMPS topologies such as flyback, forward, half-bridge and resonant converters.
Key features include the 600 V drain-source breakdown voltage rating for universal-mains rectified-bus applications, FDmesh II process technology that lowers RDS(on) and gate charge for improved efficiency, and the fast-recovery intrinsic body diode (indicated by the D suffix) that reduces reverse-recovery losses in hard-switched topologies such as two-switch forward and LLC converters. The F suffix in the part number denotes the TO-220FP fully molded isolated package, providing 2500 Vrms electrical isolation without an external insulator, simplifying heatsink mounting.
The FDmesh II stripe-trench architecture balances conduction and switching losses, allowing designers to optimize for either low-frequency conduction efficiency or high-frequency switching performance. Low gate charge reduces gate-drive losses, while the rugged body diode withstands avalanche events typical of transformer-leakage-inductance environments.
Typical applications include off-line flyback and forward AC-DC converters for industrial power supplies, PFC pre-regulator stages, motor drive inverter legs for light industrial loads, and high-voltage DC-DC modules for solar and telecom rectifiers.
Design tip: the TO-220FP isolated package has higher thermal resistance than standard TO-220, so verify junction temperature with proper heatsink sizing; drive the gate with a low-impedance driver (e.g., 10 ohm series resistor) to manage EMI from fast switching edges.
A power MOSFET is a voltage-controlled semiconductor switch used to regulate or convert electrical power. Within the component hierarchy, the STF25NM60ND belongs to the transistor family, specifically the MOSFET (metal-oxide-semiconductor field-effect transistor) class, which sits within the broader category of discrete semiconductors and power management components. Power MOSFETs are the switching elements in SMPS topologies such as flyback, forward, half-bridge and resonant converters.
Key features include the 600 V drain-source breakdown voltage rating for universal-mains rectified-bus applications, FDmesh II process technology that lowers RDS(on) and gate charge for improved efficiency, and the fast-recovery intrinsic body diode (indicated by the D suffix) that reduces reverse-recovery losses in hard-switched topologies such as two-switch forward and LLC converters. The F suffix in the part number denotes the TO-220FP fully molded isolated package, providing 2500 Vrms electrical isolation without an external insulator, simplifying heatsink mounting.
The FDmesh II stripe-trench architecture balances conduction and switching losses, allowing designers to optimize for either low-frequency conduction efficiency or high-frequency switching performance. Low gate charge reduces gate-drive losses, while the rugged body diode withstands avalanche events typical of transformer-leakage-inductance environments.
Typical applications include off-line flyback and forward AC-DC converters for industrial power supplies, PFC pre-regulator stages, motor drive inverter legs for light industrial loads, and high-voltage DC-DC modules for solar and telecom rectifiers.
Design tip: the TO-220FP isolated package has higher thermal resistance than standard TO-220, so verify junction temperature with proper heatsink sizing; drive the gate with a low-impedance driver (e.g., 10 ohm series resistor) to manage EMI from fast switching edges.
के लिए ड्रॉप-इन विकल्प STF25NM60ND — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।
विकल्प अनुरोध करेंSTF25NM60ND Maximum Ratings और Electrical Characteristics
| Polarity | N-Channel |
| Drain-Source Voltage (VDSS) | 600 V |
| Continuous Drain Current (ID at Tc) | 21 A |
| On-Resistance (RDS(on) typ) | 0.13 ohm |
| Power Dissipation (PD at Tc) | 40 W |
| Technology | FDmesh II trench |
| Body Diode | Fast recovery intrinsic |
| पैकेज | TO-220FP (isolated) |
| माउंटिंग प्रकार | Through Hole |
| Isolation | Fully molded isolated package (F suffix) |
| RoHS स्थिति | Compliant |
| Configuration | Single MOSFET |
STF25NM60ND पिन कॉन्फ़िगरेशन
| पिन 1 | Gate (G) — Gate control terminal |
| पिन 2 | Drain (D) — Connected to heatsink tab, drain terminal |
| पिन 3 | Source (S) — Source terminal |
सुरक्षित संचालन क्षेत्र
DC कंटीन्यूअस ऑपरेशन
सामान्य अनुप्रयोग
STF25NM60ND के लिए उपयुक्त है 3 अनुप्रयोगs: पावर मैनेजमेंट, मोटर कंट्रोल, LED लाइटिंग.
पावर मैनेजमेंट
STF25NM60ND का उपयोग करके पावर सप्लाई सर्किट में स्विचिंग और रेगुलेशन।
मोटर कंट्रोल
STF25NM60ND के साथ DC/BLDC मोटर चलाना और नियंत्रित करना।
LED लाइटिंग
STF25NM60ND के साथ LED स्ट्रिंग और ऐरे चलाना।
इस उत्पाद के लिए कोई FAQ उपलब्ध नहीं।
के लिए इंजीनियरिंग संदर्भ डेटा STF25NM60ND — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
Choose the STF25NM60ND when you need a 600 V, 21 A N-channel MOSFET with an isolated TO-220FP package for off-line power converters requiring a fast-recovery body diode and no external isolation pad. Choose STP25NM60ND for non-isolated TO-220 mounting with better thermal performance. Choose STB25NM60ND (D2PAK) for surface-mount-friendly boards. Choose STF23NM60ND when slightly lower current (23 A class) suffices at lower cost. For 650 V designs with more margin, consider STF24NM65N. The isolated FP package trades thermal resistance for mounting convenience and isolation.
अनुपालन जानकारी
RoHS
Compliant
REACH
Unknown
AEC-Q100
लीड फ्री
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown
RoHS compliance per STMicroelectronics product listing; other statuses not stated in provided data.
डेटा सत्यापन तिथि: 2026-08-29
— डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया
संबंधित खोजें
STF25NM60ND datasheet PDF
STF25NM60ND STMicroelectronics MOSFET
STF25NM60ND pinout TO-220FP
600V N-channel MOSFET 21A isolated TO-220FP
STF25NM60ND equivalent replacement
STF25NM60ND vs STF23NM60ND
STF25NM60ND price buy
STF25NM60ND flyback converter switch
fast body diode 600V MOSFET
what replaces STF25NM60ND
संबंधित कंपोनेंट्स और शब्द
STMicroelectronics
STF25NM60ND
STP25NM60ND
STB25NM60ND
STF23NM60ND
STF24NM65N
power MOSFET
N-channel MOSFET
discrete semiconductor
FDmesh II
TO-220FP
TO-220
D2PAK
fast recovery body diode
RDS(on)
600 V breakdown voltage
RoHS
off-line SMPS
flyback converter
PFC
1 / 1