M7AFS600-FGG256 - Fusion FPGA 600K Gates 256-BGA | Microchip
Teilenummer: M7AFS600-FGG256 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $268.04 | $268,04 |
| 10 | $258.5 | $2.585,00 |
| 90 | $243.67 | $21.930,30 |
| 500 | $238 | $119.000,00 |
| 1.000 | $232.4 | $232.400,00 |
M7AFS600-FGG256 Übersicht
An FPGA (Field Programmable Gate Array) is a semiconductor device containing a matrix of configurable logic blocks and programmable interconnects that the designer wires together after manufacturing. The Fusion family extends this concept to mixed-signal system-on-chip integration, combining flash-based programmable logic, configurable analog blocks, large flash memory, and comprehensive clock management circuitry in a single monolithic die, sitting within the broader hierarchy of programmable logic devices alongside CPLDs and ASICs.
Key features of the M7AFS600 include 110592 flip-flops of register capacity, 130nm flash-based process technology, and an integrated ARM CoreMP7 hard processor core running at up to 1098.9 MHz per distributor listings, which distinguishes the M7 series from the standard AFS600 that lacks the ARM core. The flash-based fabric is inherently single-chip, secure, and retains configuration at power-up without external boot PROM, reducing bill-of-materials cost and improving tamper resistance.
Architecturally, the Fusion family integrates configurable analog modules for system supervision, power management, and smart battery charging alongside the digital fabric, replacing discrete analog components in space-constrained designs. Clock generation and management circuitry is built in, eliminating external PLL chips in many designs.
Typical applications include industrial power management and motor control, smart battery charging systems, portable instrumentation, and embedded control systems requiring a soft mix of analog supervision and digital logic.
Designers should note the 16-week lead time reported by Mouser as of 2026-09-02, and plan board layout for the 1mm-pitch 256-ball BGA footprint early in the design cycle.
This page synthesizes distributor pricing, drop-in alternatives, comparison data, and design guidance not found in a single manufacturer datasheet.
Drop-in-Alternativen für M7AFS600-FGG256 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit M7AFS600-FGG256 (gleiche Bauform und Footprint) – abweichend in Package, Family, Operating Temperature, Process Technology, System Gates.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
M7AFS600-2FGG256
✅ Drop-In✓ Auf Lager
$274.05 / Stück
Datenblatt ansehen →M7AFS600-FG256I
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →AFS600-FGG256
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
M7AFS600-FGG256I
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →M7AFS600-1FGG256
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$92 / Stück
Datenblatt ansehen →M7AFS600-FGG256 Grenzwerte & elektrische Eigenschaften
| Family | Fusion (M7AFS600) |
| System Gates | 600K |
| Flip-Flops | 110592 |
| User I/O | 119 |
| Embedded Processor | ARM CoreMP7 |
| Core Supply Voltage | 1.5 V |
| Process Technology | 130 nm flash-based |
| Maximum Frequency | 1098.9 MHz (distributor listing) |
| Gehäuse | 256-LBGA / 256-FBGA |
| Ball Pitch | 1 mm |
| Montageart | Surface Mount |
| Configuration Memory | Flash (single-chip, non-volatile) |
| Analog Features | Integrated configurable analog blocks, clock generation and management |
| Packaging | Tray |
M7AFS600-FGG256 256-lbga / 256-fbga Pinbelegungsleitfaden
Pinbelegung für M7AFS600-FGG256 (256-lbga / 256-fbga-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für M7AFS600-FGG256.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
M7AFS600-FGG256 ist geeignet für 6 Anwendungs: Industrial Power Management, Smart Battery Charging Systems, Motor Control and Industrial Automation, Clock Generation and Management, Secure Embedded Control, Portable and Battery-Powered Instrumentation.
Industrial Power Management
The Fusion family was designed explicitly for power management applications, replacing discrete analog supervision components with integrated configurable analog blocks inside the M7AFS600-FGG256. Its flash-based fabric provides instant-on configuration so supervision and sequencing logic is active at power-up without an external boot device, a critical property for hot-swap and brown-out handling. With 119 user I/Os and built-in clock management, the device can simultaneously monitor voltage rails, sequence DC-DC converters, and run control algorithms on the ARM CoreMP7. In a typical topology, analog inputs feed the configurable analog modules while the digital fabric implements state machines for fault response, reducing board area versus a discrete supervisor plus separate FPGA approach.
Empfohlen
Smart Battery Charging Systems
Smart battery chargers require precise voltage/current monitoring, charge-profile state machines, and communication interfaces - exactly the mixed-signal combination the M7AFS600-FGG256 integrates. Per the Microchip Fusion family datasheet, smart battery charging is a headline application of the configurable analog blocks, which measure battery voltage and current while the digital fabric and ARM CoreMP7 execute charging algorithms such as CC/CV profiles. The flash-based, single-chip architecture eliminates external configuration memory on compact charger boards, and 119 I/Os leave headroom for SMBus/I2C charging ports, LED indicators, and protection FET drivers. Using one mixed-signal FPGA instead of an MCU plus AFE reduces BOM count and improves fault-response latency.
Empfohlen
Motor Control and Industrial Automation
Motor drives and factory automation nodes benefit from the M7AFS600-FGG256's ability to fuse PWM generation, encoder decoding, and safety interlock logic in one flash-based device. The fabric's instant-on behavior ensures interlocks and watchdog logic are live before an external processor boots, improving functional safety posture. The ARM CoreMP7 core can host the communication stack (e.g., fieldbus slave logic) while dedicated fabric logic closes high-rate current loops, avoiding the scheduling jitter of a software-only approach. With 119 user I/Os and multiple clock-management resources, the device supports multi-axis control within a single 256-ball BGA. Distributors report 16-week lead time, so include this FPGA early in automation BOM planning.
Empfohlen
Clock Generation and Management
The Fusion family integrates comprehensive clock generation and management circuitry on-chip, so the M7AFS600-FGG256 can replace discrete PLL/clock-buffer chips in backplane and line-card designs. The on-chip clock conditioning resources clean and distribute system clocks while the fabric implements programmable dividers, phase relationships, and glitch-free switching logic - functions that are difficult to change in fixed clock-tree silicon. Distributor listings show a maximum frequency capability of 1098.9 MHz for the M7 device, sufficient for gigahertz-class timing supervision alongside lower-rate logic. The 1.5V core and 256-ball 1mm-pitch BGA keep the clock-management footprint compact; designers should follow the datasheet power-decoupling guidelines for the analog blocks to minimize jitter contribution.
Empfohlen
Secure Embedded Control
Flash-based FPGAs are inherently more tamper-resistant than SRAM FPGAs because the bitstream is stored on-chip in non-volatile flash rather than loaded from an external, interceptable configuration PROM. The M7AFS600-FGG256 exploits this for secure embedded control: configuration data never appears on a visible bus at power-up, and the single-chip design removes the classic clone-and-replay attack vector of SRAM FPGA systems. The ARM CoreMP7 core executes application firmware while fabric logic handles real-time I/O, and the 130nm flash process provides mature reliability for long-lifecycle industrial and defense-adjacent programs. Designers should still enable available device security features in Libero and manage programming-file custody per Microchip security documentation.
Empfohlen
Portable and Battery-Powered Instrumentation
Handheld instruments and battery-powered data loggers value the M7AFS600-FGG256's integration density: one 256-ball BGA provides logic, an ARM processor, analog monitoring, and clock management, shrinking board area and quiescent complexity versus an MCU plus discrete AFE. The flash fabric draws no configuration-load current at startup and supports low-power design flows in Libero, letting unused blocks be gated. The 1.5V core supply suits modern battery rails through a small buck converter, while the 119 I/Os cover display, sensor, and communication interfaces. Instant-on behavior allows the instrument to capture the first event after power-up, an advantage over SRAM FPGA designs that need hundreds of milliseconds to boot from external memory.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für M7AFS600-FGG256 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | M7AFS600-2FGG256 | M7AFS600-FG256I | AFS600-FGG256 | M7AFS600-FGG256I | M7AFS600-1FGG256 |
|---|---|---|---|---|---|---|
| Package | 256-FBGA (1 mm pitch) | 256-FBGA - same | 256-FBGA - same | 256-FBGA - same | 256-FBGA - same | 256-FBGA - same |
| Brand | Microchip Technology (Microsemi) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 600K | 600K | 600K | 600K | 600K | 600K |
| User I/O | 119 | 119 | 119 | 119 | 119 | 119 |
| ARM CoreMP7 Processor | Yes | Yes | Yes | No | Yes | Yes |
Wichtigste Unterscheidungsmerkmale
- Embedded ARM CoreMP7 hard processor (vs. AFS600-FGG256)
- Fastest speed grade available in the same footprint (vs. M7AFS600-1FGG256)
- Integrated mixed-signal analog blocks (vs. Generic SRAM FPGAs)
Designhinweise
The 256-ball FBGA with 1mm ball pitch requires a controlled-impedance stackup and via-in-pad or dogbone fanout. Plan at least two dedicated power planes for the 1.5V core and I/O banks, and follow the Microchip Fusion datasheet power-decoupling table: place bulk capacitance near each VCC ball group and 0.1uF ceramics within 2mm of the package perimeter. The integrated analog blocks need a clean analog supply; segregate the analog ball group's return path from switching-regulator currents to preserve measurement accuracy.
Two commercial pitfalls recur with this part. First, lead time: Mouser reports 16 weeks (non-stocked) as of 2026-09-02, so do not design this FPGA into a fast-turn program without confirming allocation. Second, part-number confusion: AFS600-FGG256 (no ARM core) and M7AFS600-FGG256 share one datasheet and package; placing the wrong suffix silently removes the CoreMP7. Always specify the full ordering code including speed-grade and temperature suffixes on BOMs and purchase orders.
Estimated: with a 1.5V core on a 600K-gate 130nm flash fabric, core current depends heavily on toggle rate; a mid-utilization design toggling ~20% of 110592 flip-flops at 50 MHz may draw several hundred milliamps of core current (rough estimate - verify with the Microchip Fusion power calculator in Libero). Size the 1.5V rail regulator for peak including inrush, and use the ARM CoreMP7 clock gating during idle phases. Budget I/O bank currents separately per bank to avoid rail collapse.
Compliance-Informationen
Distributor data retrieved 2026-09-02 does not state RoHS/REACH status explicitly; verify against the Microchip product page certificate of conformance for the exact ordering code.
