AMD

XC7K325T-L2FFG900I - Kintex-7 FPGA with 500 I/O | AMD

Teilenummer: XC7K325T-L2FFG900I ✓ Aktiv
0.95 V to 1.05 V Vdss FCBGA-900 Package 710 MHz Speed
MOQ: 1 |

XC7K325T-L2FFG900I Übersicht

The AMD XC7K325T-L2FFG900I is a Kintex-7 field-programmable gate array with 326,080 logic cells, 500 I/O, and a 710 MHz maximum clock in an FCBGA-900 package. It combines programmable logic, DSP slices, block RAM, MMCMs, and PLLs in a single high-performance FPGA, making it suitable for demanding parallel processing, high-speed connectivity, industrial control, test equipment, and communications systems. The -2L grade is screened for lower maximum static power and can operate at lower core voltages for lower dynamic power than the standard -2 grade.

A Kintex-7 FPGA belongs to the programmable-logic hierarchy: FPGA is a semiconductor device whose digital functions are configured through programmable interconnect and configurable logic resources. Within the Xilinx 7 series product family, the Kintex-7 family provides a balance of logic density, signal-processing capability, memory resources, connectivity bandwidth, and power efficiency. The XC7K325T-L2FFG900I is the largest resource configuration in that family and targets systems where a smaller FPGA cannot provide sufficient logic or I/O density.

Principal features include 326,080 programmable logic cells, 500 user I/O, a 710 MHz operating clock, an FCBGA-900 package, and support for MMCM and PLL clock generation. The device also includes DSP slices and block RAM for arithmetic, filtering, packet processing, and data buffering. Its 500 I/O permit direct connection to high-density memory, high-speed transceivers, parallel buses, clocks, and control signals without requiring a separate large companion device.

The -2L designation identifies the low-power speed grade. According to the Kintex-7 family documentation, -2L devices are screened for lower maximum static power and can use lower core voltages, reducing dynamic power relative to -2 devices. This characteristic matters in systems where the FPGA processes sustained parallel workloads or operates in thermally constrained enclosures. Actual board-level power still depends on clocking, utilization, I/O activity, memory traffic, configuration method, and ambient temperature.

Typical uses include high-speed network adapters, industrial vision and control systems, scientific instrumentation, semiconductor test equipment, digital waveform processing, embedded signal-processing platforms, and interface concentrators. The combination of substantial programmable logic, dedicated DSP resources, high pin count, and advanced clocking allows one device to implement multiple parallel pipelines while coordinating data transfer among external memory, converters, transceivers, and network processors.

Designers should use the package pinout files and UG475 when assigning balls and planning the PCB. Because FCBGA-900 requires a dense, multilayer PCB with controlled escape routing, differential-pair geometry, power-plane segmentation, and thermal management should be validated before release. Configuration storage, startup sequencing, decoupling, and I/O standards must also be planned against the selected board and power architecture.

This page consolidates device specifications, ordered-code alternatives, application guidance, package considerations, and engineering comparison points into one design-oriented reference. It helps engineers distinguish speed-grade and temperature-grade alternatives while emphasizing that an FPGA ordering code also determines tool target, timing grade, qualification, and system constraints.

Drop-in-Alternativen für XC7K325T-L2FFG900I – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit XC7K325T-L2FFG900I (gleiche Bauform und Footprint) – abweichend in Process Technology, Speed Grade, Package, User I/O, Clock Management.

AMD
Process Technology: 28 nm HKMG CMOS
Speed Grade: -1
Vergleichen mit XC7K325T-L2FFG900I →
AMD
Process Technology: 28 nm HKMG
Speed Grade: -2
Package: 900-BBGA, FCBGA (FFG900), 30x30 mm, 1.0 mm pitch
Vergleichen mit XC7K325T-L2FFG900I →
AMD
Process Technology: 28nm
Speed Grade: -2
Package: 900-BBGA, FCBGA
Vergleichen mit XC7K325T-L2FFG900I →
AMD
Process Technology: 28 nm
Speed Grade: -3, highest-performance Kintex-7 speed grade
Package: 900-BBGA, FCBGA
Vergleichen mit XC7K325T-L2FFG900I →

XC7K325T-2FFG900I

✅ Drop-In
AMD
📦 FCBGA-900
Kintex-7 · 326080 · 16404480 bits · 840 · 500 · 900-BBGA, FCBGA · -2 · Industrial (-40°C to +100°C)

✓ Auf Lager

$65 / Stück

Datenblatt ansehen →

XC7K325T-1FFG900I

✅ Drop-In
AMD
📦 FCBGA-900
Kintex-7 Field Programmable Gate Array (FPGA) · 326,080 cells · 25,475 CLBs · 1,098 MHz · 28 nm HKMG CMOS · 500 I/O · FCBGA-900 · 900-BBGA FCBGA

Preis auf Anfrage

Datenblatt ansehen →

XC7K325T-3FFG900I

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 FCBGA-900
The -3 grade provides a higher performance grade than -2L while retaining the 326,080-cell architecture and FFG900 footprint

📋 Referenzalternative (nicht im Katalog)

XC7K325T-3FFG900E

✅ Drop-In ⚠️ Spezifikationen ungeprüft
AMD
📦 FCBGA-900
Kintex-7 Field-Programmable Gate Array (FPGA) · 326,080 cells · 500 I/O · 900-BBGA, FCBGA · 28 nm · -3, highest-performance Kintex-7 speed grade · Kintex-7 · CMOS programmable logic

Preis auf Anfrage

Datenblatt ansehen →

XC7K325T-2FFG900C

✅ Drop-In ⚠️ Spezifikationen ungeprüft
AMD
📦 FCBGA-900
Kintex-7 · 326080 · 407600 · 16404480 bits · 840 · 16024640 bits · 16 · 500

Preis auf Anfrage

Datenblatt ansehen →

XC7K325T-L2FFG900I Grenzwerte & elektrische Eigenschaften

Device Type Kintex-7 Field-Programmable Gate Array
Programmable Logic Cells 326,080 cells
User I/O 500 I/O
Maximale Taktfrequenz 710 MHz
Core Voltage Range 0.95 V to 1.05 V
Process Technology CMOS
Gehäuse FCBGA-900
Speed Grade -2L
Clock Management MMCM and PLL
Programmable Resources DSP slices and block RAM
Device Family 7 Series Kintex-7
RoHS-Status unknown
REACH Status unknown
AEC-Q100 Qualification unknown

XC7K325T-L2FFG900I fcbga-900 Pinbelegungsleitfaden

Pinbelegung für XC7K325T-L2FFG900I (fcbga-900-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für XC7K325T-L2FFG900I im fcbga-900-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für XC7K325T-L2FFG900I.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

XC7K325T-L2FFG900I ist geeignet für 6 Anwendungs: High-Speed Network Interface Consolidation, Industrial Vision and Motion Control, Digital Signal Processing and Waveform Analysis, Semiconductor and Board Test Equipment, Aerospace and Defense Data Processing, Scientific Instrumentation and Acquisition.

🌐

High-Speed Network Interface Consolidation

The XC7K325T-L2FFG900I fits network interface designs that need extensive parallel logic alongside many high-speed external connections. Its 326,080 logic cells can support packet classification, queue management, aggregation, and protocol adaptation, while 500 I/O provide direct connections to transceivers, memory, clocks, and control devices. Dedicated DSP slices and block RAM are useful for traffic shaping or statistical operations that would otherwise consume large amounts of general-purpose logic. The design should use separate clock domains for the transceiver and fabric where required, with AMD timing analysis confirming all interface timing under the selected -2L grade.

🏭

Industrial Vision and Motion Control

The XC7K325T-L2FFG900I is suitable for industrial vision, motion-control, and machine-control platforms that combine real-time computation with numerous sensors and actuators. The programmable logic fabric can implement timing-critical control and interface state machines, while DSP slices support multiplication, filtering, and position calculations. The 500 I/O offer substantial connectivity for image sensors, encoders, converters, field buses, and safety-related discrete signals. For deterministic behavior, isolate machine-safety and real-time control domains, constrain clocking paths carefully, and validate every interface against the production temperature range.

🔧

Digital Signal Processing and Waveform Analysis

The XC7K325T-L2FFG900I provides the logic density and dedicated resources required for digital waveform analysis, filtering, and parallel signal processing. DSP slices can accelerate multiply-accumulate stages, while block RAM supports sample buffering and working storage; the remaining programmable logic handles channel control, triggers, data formatting, and results. The 710 MHz device clock provides a high-speed timing foundation, although user-level sample throughput depends on architecture, resource mapping, memory bandwidth, and pipelining. Validate DSP inference and timing closure in the final tool version before relying on a specific channel count or processing rate.

🖥️

Semiconductor and Board Test Equipment

The XC7K325T-L2FFG900I fits parallel test systems requiring substantial pattern generation, timing control, data capture, and interface management. Its 326,080 logic cells can execute multiple concurrent test channels, and the DSP and block-RAM resources support pattern processing and temporary data storage. The 500 I/O provide dense connections to test-head fixtures, device-under-test boards, memories, and timing references. Because test equipment often combines wide capture bandwidth with strict signal-integrity requirements, use the package pinout files, controlled-impedance stack-up, and AMD timing constraints when implementing high-speed test paths.

✈️

Aerospace and Defense Data Processing

The XC7K325T-L2FFG900I can support parallel data-processing subsystems in aerospace, defense, and rugged embedded platforms where substantial logic and I/O density are required. The Kintex-7 fabric can implement protocol handling, navigation-data processing, command decoding, and real-time control, while DSP resources accelerate filtering and fixed-point arithmetic. The FCBGA-900 package allows integration into dense multichannel boards, but production suitability depends on the exact qualification, temperature, screening, and reliability requirements of the program. Confirm the selected ordering code against those requirements and complete environmental testing for the assembled system.

📡

Scientific Instrumentation and Acquisition

The XC7K325T-L2FFG900I is appropriate for scientific instruments that acquire, process, and route high-volume measurements. Parallel ADC channels can feed DSP pipelines and block RAM, while programmable logic handles clock recovery, decimation, interpolation, calibration, and data packaging. Its 500 I/O support concurrent connection to converters, memories, displays, and communication controllers without relying on multiple large FPGAs. The -2L low-power profile can benefit thermally constrained instruments, but power must be calculated with realistic switching activity and I/O loading. Thermal analysis should include the assembled instrument enclosure rather than relying on board-only estimates.

What are the key specifications of XC7K325T-L2FFG900I that engineers should know?
The XC7K325T-L2FFG900I is a Kintex-7 FPGA with 326,080 logic cells, 500 I/O, and a 710 MHz maximum clock in an FCBGA-900 package. According to the AMD Kintex-7 family documentation, it also provides MMCM and PLL clock-management resources, DSP slices, and block RAM. Its -2L speed grade is intended for lower static power and can operate at lower core voltages than the standard -2 grade. The combination of logic density, pin count, and dedicated processing resources makes it appropriate for parallel processing, high-speed interface consolidation, industrial systems, and communications equipment.
Where can I download the XC7K325T-L2FFG900I datasheet PDF?
The XC7K325T-L2FFG900I datasheet can be obtained through the AMD Kintex-7 product documentation or the exact-part data pages linked on this product page. The relevant document is the Kintex-7 FPGA data sheet, which defines the 326,080-cell device, 500 I/O configuration, FFG900 package, speed grades, electrical characteristics, and ordering information. Use the exact ordering code when selecting an entry in the data sheet, and consult UG475 for package pin names and ball assignments.
Where can I find the XC7K325T-L2FFG900I pinout?
The XC7K325T-L2FFG900I pinout is documented in the AMD Kintex-7 package pinout files and in UG475. The package pinout resource provides package-specific ASCII and CSV pin data, while UG475 explains the package architecture and ball locations. For a new FCBGA-900 layout, use both resources together and verify the selected I/O standard against the design constraints. This page does not reproduce the 900-ball assignment because the complete ball map is too large for a compact package diagram.
What is the difference between the -2L and -2 speed grades?
The -2L grade is screened for lower maximum static power and can operate at lower core voltages than the standard -2 grade. According to the Kintex-7 family documentation, this enables lower dynamic power in suitable designs while retaining the same 326,080-cell FPGA architecture and FCBGA-900 package option. The ordering code also affects timing analysis, power estimation, qualification, and tool configuration, so a -2L device should not be modeled as a generic -2 part without reviewing its specific timing and power tables.
What is XC7K325T-L2FFG900I used for in industrial control systems?
The XC7K325T-L2FFG900I is well suited to industrial control systems that require parallel logic, numerous external interfaces, and real-time processing. Its 326,080 logic cells can host control state machines and protocol logic, while DSP slices and block RAM support filtering, motion calculations, or signal conditioning. The 500 I/O provide connections for sensors, actuators, field buses, memory, and converters. A practical design should reserve separate PLLs for interface and fabric clocks and use AMD timing analysis to close interfaces under the selected -2L speed grade.
Is XC7K325T-L2FFG900I suitable for high-speed networking equipment?
The XC7K325T-L2FFG900I is suitable for high-speed networking equipment that combines substantial parallel processing with many external connections. Its 326,080 logic cells and dedicated DSP and block-RAM resources can support packet pipelines, traffic classification, aggregation, and interface adaptation, while 500 I/O allow dense connectivity to transceivers, memory, and control logic. Actual line-rate performance depends on the selected transceiver, reference clocking scheme, PCB signal integrity, device timing closure, and the specific protocol implementation.
What is the best drop-in replacement for XC7K325T-L2FFG900I?
The closest same-footprint choices are other XC7K325T FFG900 ordering codes, including XC7K325T-2FFG900I, XC7K325T-1FFG900I, and XC7K325T-3FFG900I. They retain the 326,080-cell Kintex-7 architecture and FFG900 footprint, but their speed grade, temperature grade, power characteristics, or qualification requirements differ. A true functional substitution therefore requires checking timing, bitstream compatibility, operating temperature, system power limits, and lifecycle objectives rather than relying on the package name alone.
Can XC7K325T-2FFG900I replace XC7K325T-L2FFG900I?
The XC7K325T-2FFG900I is a pin-compatible FFG900 alternative to the XC7K325T-L2FFG900I because both use the same Kintex-7 device family and 326,080-cell configuration. The meaningful distinction is the speed grade: -2L is screened for lower static power and may use lower core voltages, while -2 is the standard grade. Use the -2 device only after confirming that timing, power, thermal, qualification, and system-performance targets remain acceptable.
When should I choose XC7K325T-L2FFG900I over XC7K325T-2FFG900I?
Choose the XC7K325T-L2FFG900I when the design prioritizes the lower-power -2L grade and can meet timing with that grade. The AMD Kintex-7 documentation states that -2L devices are screened for lower maximum static power and can operate at lower core voltages for lower dynamic power than -2 devices. Choose the standard XC7K325T-2FFG900I when its timing characteristics are needed without the -2L power-management profile. Both options share the FFG900 footprint and 326,080-cell architecture.
Is XC7K325T-L2FFG900I suitable for DSP and signal-processing applications?
The XC7K325T-L2FFG900I is suitable for DSP and signal-processing applications because the Kintex-7 architecture combines 326,080 programmable logic cells with dedicated DSP slices and block RAM. The programmable fabric can implement control, interfaces, and data movement, while the DSP resources accelerate multiply-accumulate and filtering operations. Practical throughput depends on clock frequency, resource utilization, memory bandwidth, data representation, and timing closure. The 710 MHz figure is a device clock specification, not a guarantee of equivalent user-level throughput for every pipeline.
How should power and thermal design be handled for XC7K325T-L2FFG900I?
Power and thermal design for the XC7K325T-L2FFG900I should begin with AMD power-estimation and thermal-analysis data for the exact -2L ordering code. Estimated: device dissipation equals the calculated core and I/O power; junction temperature equals ambient temperature plus device power multiplied by the effective board-to-ambient thermal resistance. These estimates must be compared with the device limits. High utilization, clock activity, memory traffic, and dense I/O use can raise power, so production boards need adequate copper, cooling, and verified airflow.
What PCB considerations apply to the FCBGA-900 XC7K325T-L2FFG900I?
The FCBGA-900 XC7K325T-L2FFG900I requires a multilayer PCB with dense ball escape routing, continuous power planes, controlled impedance, and careful thermal design. Place decoupling close to the relevant supply balls, keep high-speed routes short, and follow AMD reference design and package guidance. Differential interfaces require geometry and reference-plane continuity that pass post-layout simulation. Because the package has 900 balls, manufacturing capability, solder-mask and paste design, via-in-pad strategy, and board warpage should be reviewed before prototype release.
Where can I buy XC7K325T-L2FFG900I online and what is its price?
Use the Request a Quote form on this page to ask for XC7K325T-L2FFG900I availability, unit pricing, and current lead time. Include the complete ordering code, required quantity, delivery date, destination, and any date-code or documentation constraints. Because FPGA pricing can vary with configuration, volume, and market conditions, the quote form provides the current commercial answer without presenting a stale price. Confirm that the quoted item is specifically XC7K325T-L2FFG900I and not an XC7K325T-2FFG900I ordering code.
What is the lead time and stock status for XC7K325T-L2FFG900I?
Current stock, minimum order quantity, and lead time for XC7K325T-L2FFG900I should be confirmed through the Request a Quote form on this page. Submit the required quantity, target delivery date, shipment destination, and any production or traceability requirements with the inquiry. The complete -2L FFG900 ordering code matters because similarly named XC7K325T variants can have different speed, temperature, and qualification characteristics. A written quotation is the appropriate way to establish current availability for this catalog device.
Is there a cross-brand drop-in equivalent for XC7K325T-L2FFG900I?
No cross-brand drop-in equivalent is established for the XC7K325T-L2FFG900I by the available compatibility information. Direct replacement requires more than matching the 900-ball format: the substitute must match the Kintex-7 architecture, power configuration, clocking, memory interfaces, configuration scheme, timing grade, and design-tool support. FPGA cross-family devices are generally board migrations rather than pin-for-pin substitutions. Use the Request a Quote form if you need a quotation for the original AMD ordering code or an engineering review of a proposed migration.

Technische Referenzdaten für XC7K325T-L2FFG900I – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the XC7K325T-L2FFG900I when a design needs the full 326,080-cell Kintex-7 resource level, 500 I/O, and the lower-power characteristics associated with the -2L grade. It is a strong fit for power-constrained industrial, communications, test, and signal-processing systems that use the FCBGA-900 footprint and can meet timing under the -2L limits. Select the XC7K325T-2FFG900I when standard -2 timing and power characteristics are required. Choose the XC7K325T-1FFG900I only when the lower speed grade still satisfies all timing constraints; choose the -3 ordering codes when additional performance margin is necessary. Temperature suffix changes must follow the system's ambient range and qualification requirements. No cross-brand device is treated as a direct drop-in because FPGA migration also depends on architecture, configuration, tooling, clocking, memory interfaces, and board-level constraints rather than package fit alone.

Vergleich mit Alternativen

Parameter Dieses Produkt XC7K325T-2FFG900I XC7K325T-1FFG900I XC7K325T-3FFG900I XC7K325T-3FFG900E XC7K325T-2FFG900C
Package FCBGA-900 FCBGA-900 - same FCBGA-900 - same FCBGA-900 - same FCBGA-900 - same FCBGA-900 - same
Brand AMD AMD AMD AMD AMD AMD
Device Family Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7
Speed Grade -2L -2 -1 -3 -3 -2
Temperature Suffix I I I I E C
Low-Power -2L Screening Yes No - standard -2 grade No - standard -1 grade No - standard -3 grade No - standard -3 grade No - standard -2 grade

Wichtigste Unterscheidungsmerkmale

  • Low-power -2L grade within a high-density Kintex-7 device (vs. XC7K325T-2FFG900I)
  • High logic density with extensive I/O in one device (vs. XC7Z100-L2FFG900I)
  • Higher performance grade for designs needing additional timing margin (vs. XC7K325T-1FFG900I)
  • Pin-compatible upgrade paths within the established FFG900 footprint (vs. XC7K325T-3FFG900E)

Designhinweise

Build the power tree from the exact -2L operating requirements and AMD power-estimation tables. The 0.95 V to 1.05 V core range requires separate, well-decoupled rail planning rather than a single indiscriminate supply connection. Estimate: total board dissipation equals the sum of core, I/O, auxiliary, memory, and conversion losses; allowable power also depends on the complete enclosure and its cooling path. Confirm startup current, sequencing, voltage tolerance, and the -2L core-voltage operating points before fixing the power topology.

Use the AMD Kintex-7 FFG900 package files and UG475 as the authoritative ball-map basis. Route the densest I/O through short escape paths, maintain continuous reference planes beneath high-speed links, and avoid plane splits across critical transceiver or memory interfaces. Place decoupling capacitors close to the supply and ground balls, with vias positioned to minimize high-frequency inductance. Validate the selected layer stack with signal-integrity and power-integrity simulations rather than relying only on nominal impedance calculations.

Estimate junction temperature from measured or calculated device power and the assembled system's effective thermal resistance. For example, estimated junction rise equals device power in watts multiplied by the effective junction-to-ambient thermal resistance in degrees Celsius per watt; add the enclosure ambient temperature to obtain estimated junction temperature. Compare that result with the device limit for the selected temperature suffix. Use layer-stack thermal simulation and thermocouple measurements on production-intent hardware because a small package can develop substantial gradients across the FCBGA-900 device.

Do not treat similarly named XC7K325T ordering codes as interchangeable without checking every suffix. The -2L speed grade, -1, -2, and -3 performance grades, and I, C, or E temperature suffixes can alter timing, power, qualification, and operating limits. Before releasing a bitstream, create the exact device and package target in the project, verify that synthesis and implementation constraints reference the correct speed grade, and rerun timing and power analysis against the production ordering code.

Treat every high-speed interface as a complete electrical system involving the FPGA, PCB stack-up, connector or device partner, and clock source. Use controlled-impedance routing, matched length where required by the interface specification, adequate return-path continuity, and an explicit clocking architecture. For transceiver links, follow the AMD reference-design layout and de-embed the fixture or package effects during SI validation. Post-layout extraction and eye or jitter measurements provide stronger assurance than rule-based length matching alone.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The exact XC7K325T-L2FFG900I ordering code was not accompanied by explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Confirm compliance and qualification documentation for the assembled product requirements.

Ähnliche Suchanfragen

xc7k325t datasheet xc7k325t development board xc7k325t 2ffg900i xc7k325t 2ffg900c xc7k325t 2ffg676i xc7k325t 2ffg676c xc7k325t 1fbg676c xc7k325t 1fbg676i xc7k325t 1fbg900i XC7K325T-L2FFG900I datasheet XC7K325T-L2FFG900I pinout XC7K325T-L2FFG900I equivalent XC7K325T-L2FFG900I replacement AMD XC7K325T-L2FFG900I XC7K325T-L2FFG900I price

Verwandte Bauteile & Begriffe

AMD Xilinx XC7K325T-L2FFG900I XC7K325T-2FFG900I XC7K325T-1FFG900I XC7K325T-3FFG900I XC7K325T-3FFG900E XC7K325T-2FFG900C Kintex-7 FPGA programmable logic field-programmable gate array 326,080 logic cells 500 I/O 710 MHz FCBGA-900 BGA package surface-mount semiconductor MMCM PLL DSP slice block RAM industrial control signal processing network interface consolidation UG475 RoHS REACH AEC-Q100
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen