XC7K325T-L2FFG900I - Kintex-7 FPGA with 500 I/O | AMD
MPN: XC7K325T-L2FFG900I ✓ ActiveXC7K325T-L2FFG900I Overview
A Kintex-7 FPGA belongs to the programmable-logic hierarchy: FPGA is a semiconductor device whose digital functions are configured through programmable interconnect and configurable logic resources. Within the Xilinx 7 series product family, the Kintex-7 family provides a balance of logic density, signal-processing capability, memory resources, connectivity bandwidth, and power efficiency. The XC7K325T-L2FFG900I is the largest resource configuration in that family and targets systems where a smaller FPGA cannot provide sufficient logic or I/O density.
Principal features include 326,080 programmable logic cells, 500 user I/O, a 710 MHz operating clock, an FCBGA-900 package, and support for MMCM and PLL clock generation. The device also includes DSP slices and block RAM for arithmetic, filtering, packet processing, and data buffering. Its 500 I/O permit direct connection to high-density memory, high-speed transceivers, parallel buses, clocks, and control signals without requiring a separate large companion device.
The -2L designation identifies the low-power speed grade. According to the Kintex-7 family documentation, -2L devices are screened for lower maximum static power and can use lower core voltages, reducing dynamic power relative to -2 devices. This characteristic matters in systems where the FPGA processes sustained parallel workloads or operates in thermally constrained enclosures. Actual board-level power still depends on clocking, utilization, I/O activity, memory traffic, configuration method, and ambient temperature.
Typical uses include high-speed network adapters, industrial vision and control systems, scientific instrumentation, semiconductor test equipment, digital waveform processing, embedded signal-processing platforms, and interface concentrators. The combination of substantial programmable logic, dedicated DSP resources, high pin count, and advanced clocking allows one device to implement multiple parallel pipelines while coordinating data transfer among external memory, converters, transceivers, and network processors.
Designers should use the package pinout files and UG475 when assigning balls and planning the PCB. Because FCBGA-900 requires a dense, multilayer PCB with controlled escape routing, differential-pair geometry, power-plane segmentation, and thermal management should be validated before release. Configuration storage, startup sequencing, decoupling, and I/O standards must also be planned against the selected board and power architecture.
This page consolidates device specifications, ordered-code alternatives, application guidance, package considerations, and engineering comparison points into one design-oriented reference. It helps engineers distinguish speed-grade and temperature-grade alternatives while emphasizing that an FPGA ordering code also determines tool target, timing grade, qualification, and system constraints.
Drop-in alternatives for XC7K325T-L2FFG900I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with XC7K325T-L2FFG900I (same form factor and footprint) — differing in Process Technology, Speed Grade, Package, User I/O, Clock Management.
XC7K325T-2FFG900I
✅ Drop-In✓ In Stock
$65 / Unit
View Datasheet →XC7K325T-1FFG900I
✅ Drop-InContact for price
View Datasheet →XC7K325T-3FFG900I
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XC7K325T-3FFG900E
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →XC7K325T-2FFG900C
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →XC7K325T-L2FFG900I Maximum Ratings & Electrical Characteristics
| Device Type | Kintex-7 Field-Programmable Gate Array |
| Programmable Logic Cells | 326,080 cells |
| User I/O | 500 I/O |
| Maximum Clock Frequency | 710 MHz |
| Core Voltage Range | 0.95 V to 1.05 V |
| Process Technology | CMOS |
| Package | FCBGA-900 |
| Speed Grade | -2L |
| Clock Management | MMCM and PLL |
| Programmable Resources | DSP slices and block RAM |
| Device Family | 7 Series Kintex-7 |
| RoHS Status | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
XC7K325T-L2FFG900I fcbga-900 Pin Configuration Guide
Pin configuration for XC7K325T-L2FFG900I (fcbga-900 package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XC7K325T-L2FFG900I.
Refer to the datasheet for full pin configuration.
Typical Applications
XC7K325T-L2FFG900I is suitable for 6 applications: High-Speed Network Interface Consolidation, Industrial Vision and Motion Control, Digital Signal Processing and Waveform Analysis, Semiconductor and Board Test Equipment, Aerospace and Defense Data Processing, Scientific Instrumentation and Acquisition.
High-Speed Network Interface Consolidation
The XC7K325T-L2FFG900I fits network interface designs that need extensive parallel logic alongside many high-speed external connections. Its 326,080 logic cells can support packet classification, queue management, aggregation, and protocol adaptation, while 500 I/O provide direct connections to transceivers, memory, clocks, and control devices. Dedicated DSP slices and block RAM are useful for traffic shaping or statistical operations that would otherwise consume large amounts of general-purpose logic. The design should use separate clock domains for the transceiver and fabric where required, with AMD timing analysis confirming all interface timing under the selected -2L grade.
Recommended
Industrial Vision and Motion Control
The XC7K325T-L2FFG900I is suitable for industrial vision, motion-control, and machine-control platforms that combine real-time computation with numerous sensors and actuators. The programmable logic fabric can implement timing-critical control and interface state machines, while DSP slices support multiplication, filtering, and position calculations. The 500 I/O offer substantial connectivity for image sensors, encoders, converters, field buses, and safety-related discrete signals. For deterministic behavior, isolate machine-safety and real-time control domains, constrain clocking paths carefully, and validate every interface against the production temperature range.
Recommended
Digital Signal Processing and Waveform Analysis
The XC7K325T-L2FFG900I provides the logic density and dedicated resources required for digital waveform analysis, filtering, and parallel signal processing. DSP slices can accelerate multiply-accumulate stages, while block RAM supports sample buffering and working storage; the remaining programmable logic handles channel control, triggers, data formatting, and results. The 710 MHz device clock provides a high-speed timing foundation, although user-level sample throughput depends on architecture, resource mapping, memory bandwidth, and pipelining. Validate DSP inference and timing closure in the final tool version before relying on a specific channel count or processing rate.
Recommended
Semiconductor and Board Test Equipment
The XC7K325T-L2FFG900I fits parallel test systems requiring substantial pattern generation, timing control, data capture, and interface management. Its 326,080 logic cells can execute multiple concurrent test channels, and the DSP and block-RAM resources support pattern processing and temporary data storage. The 500 I/O provide dense connections to test-head fixtures, device-under-test boards, memories, and timing references. Because test equipment often combines wide capture bandwidth with strict signal-integrity requirements, use the package pinout files, controlled-impedance stack-up, and AMD timing constraints when implementing high-speed test paths.
Recommended
Aerospace and Defense Data Processing
The XC7K325T-L2FFG900I can support parallel data-processing subsystems in aerospace, defense, and rugged embedded platforms where substantial logic and I/O density are required. The Kintex-7 fabric can implement protocol handling, navigation-data processing, command decoding, and real-time control, while DSP resources accelerate filtering and fixed-point arithmetic. The FCBGA-900 package allows integration into dense multichannel boards, but production suitability depends on the exact qualification, temperature, screening, and reliability requirements of the program. Confirm the selected ordering code against those requirements and complete environmental testing for the assembled system.
Recommended
Scientific Instrumentation and Acquisition
The XC7K325T-L2FFG900I is appropriate for scientific instruments that acquire, process, and route high-volume measurements. Parallel ADC channels can feed DSP pipelines and block RAM, while programmable logic handles clock recovery, decimation, interpolation, calibration, and data packaging. Its 500 I/O support concurrent connection to converters, memories, displays, and communication controllers without relying on multiple large FPGAs. The -2L low-power profile can benefit thermally constrained instruments, but power must be calculated with realistic switching activity and I/O loading. Thermal analysis should include the assembled instrument enclosure rather than relying on board-only estimates.
Recommended
Recommended Products Summary
Engineering reference data for XC7K325T-L2FFG900I — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XC7K325T-2FFG900I | XC7K325T-1FFG900I | XC7K325T-3FFG900I | XC7K325T-3FFG900E | XC7K325T-2FFG900C |
|---|---|---|---|---|---|---|
| Package | FCBGA-900 | FCBGA-900 - same | FCBGA-900 - same | FCBGA-900 - same | FCBGA-900 - same | FCBGA-900 - same |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Speed Grade | -2L | -2 | -1 | -3 | -3 | -2 |
| Temperature Suffix | I | I | I | I | E | C |
| Low-Power -2L Screening | Yes | No - standard -2 grade | No - standard -1 grade | No - standard -3 grade | No - standard -3 grade | No - standard -2 grade |
Key Differentiators
- Low-power -2L grade within a high-density Kintex-7 device (vs XC7K325T-2FFG900I)
- High logic density with extensive I/O in one device (vs XC7Z100-L2FFG900I)
- Higher performance grade for designs needing additional timing margin (vs XC7K325T-1FFG900I)
- Pin-compatible upgrade paths within the established FFG900 footprint (vs XC7K325T-3FFG900E)
Design Notes
Build the power tree from the exact -2L operating requirements and AMD power-estimation tables. The 0.95 V to 1.05 V core range requires separate, well-decoupled rail planning rather than a single indiscriminate supply connection. Estimate: total board dissipation equals the sum of core, I/O, auxiliary, memory, and conversion losses; allowable power also depends on the complete enclosure and its cooling path. Confirm startup current, sequencing, voltage tolerance, and the -2L core-voltage operating points before fixing the power topology.
Use the AMD Kintex-7 FFG900 package files and UG475 as the authoritative ball-map basis. Route the densest I/O through short escape paths, maintain continuous reference planes beneath high-speed links, and avoid plane splits across critical transceiver or memory interfaces. Place decoupling capacitors close to the supply and ground balls, with vias positioned to minimize high-frequency inductance. Validate the selected layer stack with signal-integrity and power-integrity simulations rather than relying only on nominal impedance calculations.
Estimate junction temperature from measured or calculated device power and the assembled system's effective thermal resistance. For example, estimated junction rise equals device power in watts multiplied by the effective junction-to-ambient thermal resistance in degrees Celsius per watt; add the enclosure ambient temperature to obtain estimated junction temperature. Compare that result with the device limit for the selected temperature suffix. Use layer-stack thermal simulation and thermocouple measurements on production-intent hardware because a small package can develop substantial gradients across the FCBGA-900 device.
Do not treat similarly named XC7K325T ordering codes as interchangeable without checking every suffix. The -2L speed grade, -1, -2, and -3 performance grades, and I, C, or E temperature suffixes can alter timing, power, qualification, and operating limits. Before releasing a bitstream, create the exact device and package target in the project, verify that synthesis and implementation constraints reference the correct speed grade, and rerun timing and power analysis against the production ordering code.
Treat every high-speed interface as a complete electrical system involving the FPGA, PCB stack-up, connector or device partner, and clock source. Use controlled-impedance routing, matched length where required by the interface specification, adequate return-path continuity, and an explicit clocking architecture. For transceiver links, follow the AMD reference-design layout and de-embed the fixture or package effects during SI validation. Post-layout extraction and eye or jitter measurements provide stronger assurance than rule-based length matching alone.
Compliance Information
The exact XC7K325T-L2FFG900I ordering code was not accompanied by explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Confirm compliance and qualification documentation for the assembled product requirements.