EP1SGX40GF1020I5 - 41,250 Logic Cells Stratix GX FPGA | Intel
Référence : EP1SGX40GF1020I5 ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $1850 | $1 850,00 |
| 10 | $1720 | $17 200,00 |
| 100 | $1580 | $158 000,00 |
| 500 | $1450 | $725 000,00 |
| 1 000 | $1325 | $1 325 000,00 |
EP1SGX40GF1020I5 Présentation
What is a Stratix GX FPGA? A Stratix GX is a high-density SRAM-based FPGA that integrates dedicated multi-gigabit transceivers (MGTs) alongside general-purpose programmable logic, embedded memory blocks, and DSP blocks on a single die. The GX family belongs to the broader category of programmable logic devices (PLD), which in the digital IC hierarchy sits between fixed-function ASICs and software-defined processors. Integrating transceivers with logic makes the Stratix GX especially suited for high-bandwidth serial interconnect applications where discrete PHY chips would otherwise consume board area and add latency.
Key features include 3,423,744 embedded memory bits, 384 9x9 multiplier blocks, dedicated clock management with up to 12 PLLs, and high-speed transceivers operating up to 6.375 Gbps per channel. The 'I' speed grade denotes an industrial temperature range (-40 C to +100 C ambient), and '5' indicates the device speed bin within the Stratix GX family. The 1020-ball FC-FBGA (Flip-Chip Fine-pitch Ball Grid Array) package supports high I/O count and excellent signal integrity for backplane and line-card designs.
Architecture-wise, the device employs a fine-grained logic element with a 4-input look-up table (LUT), a dedicated carry chain, and per-LUT register. Embedded TriMatrix memory provides three block sizes (512 bits, 4 Kbits, 512 Kbits) for flexible buffering. The transceiver channels implement clock data recovery (CDR) compliant with IEEE 802.3 clause 36 for Gigabit Ethernet, supporting /I2/ ordered-set clock compensation and rate matching through /K28.5/+/D16.2/- patterns.
Typical applications include 10 Gigabit Ethernet line cards, Serial RapidIO bridges, PCI Express endpoints, base-station baseband processing, and high-end test & measurement backplanes. The integrated transceivers replace external PHY ICs and reduce board complexity. Designers also use the EP1SGX40GF1020I5 in broadcast video routing, defence signal processing, and storage area network (SAN) switching.
A primary design consideration is PCB BGA fanout and escape routing for a 1020-ball package, which demands high-layer-count PCBs (typically 10+ layers) and 0.8 mm or 1.0 mm pitch escape techniques. Power estimation is critical because the transceiver analogue supply and core logic together can exceed 15 W at full utilization, requiring a multi-rail DC-DC architecture. JTAG and Active Serial configuration both supported; in-system programming is enabled via a dedicated AS configuration flash.
This page synthesizes XAIPART distributor pricing, drop-in same-package alternatives, and practical BGA layout/design notes not found in the manufacturer datasheet alone.
Alternatives de remplacement direct pour EP1SGX40GF1020I5 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EP1SGX40GF1020I5 (même facteur de forme et même empreinte) — différant par Operating Temperature, Speed Grade, Package, Process Technology, Family.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EP1SGX40GF1020C7
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1475 / unité
Voir la fiche technique →EP1SGX40GF1020C6
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$360 / unité
Voir la fiche technique →EP1SGX40GF1020C5
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$120 / unité
Voir la fiche technique →EP1SGX40GF1020C7N
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$285 / unité
Voir la fiche technique →EP1SGX40GF1020C8
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1390 / unité
Voir la fiche technique →EP1SGX40GF1020I6N
✅ Remplacement direct✓ En stock
$1195 / unité
Voir la fiche technique →EP1SGX40GF1020I5 Valeurs maximales et caractéristiques électriques
| Family | Stratix GX |
| Logic Elements | 41,250 |
| Configurable Logic Blocks (CLBs) | 4,125 |
| Embedded Memory Bits | 3,423,744 |
| Embedded Multiplier Blocks | 384 (9x9) |
| Number of Terminals | 1020 (Ball) |
| Package Type | 1020-ball FC-FBGA |
| Package Code | BGA |
| Package Shape | Square |
| Process Technology | 130 nm CMOS |
| Core Supply Voltage | 1.5 V (1.425 V to 1.575 V) |
| Temperature Grade | Military / Industrial (I-grade) |
| Combinatorial Delay (per CLB) | 7.49 ns |
| Type de montage | Surface Mount |
| Statut RoHS | Unknown - verify with Intel/Altera product page |
Guide de configuration des broches du EP1SGX40GF1020I5 square
Configuration des broches du EP1SGX40GF1020I5 (boîtier square). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour EP1SGX40GF1020I5.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
EP1SGX40GF1020I5 convient pour 7 applications: 10 Gigabit Ethernet Line Cards, Serial RapidIO Bridge / Switch, PCI Express Endpoint Card, Wireless Base-Station Baseband, Broadcast Video Routing / Switchers, Storage Area Network Switch / HBA, Industrial Test & Measurement Backplane.
10 Gigabit Ethernet Line Cards
The EP1SGX40GF1020I5 is well suited for 10 Gigabit Ethernet line cards because its up to 20 integrated multi-gigabit transceivers operate at 6.375 Gbps per channel, enough to backplane-grade XAUI or four-lane 10 GbE PHY interfaces without external SerDes chips. The 41,250 logic elements and 384 9x9 multiplier blocks provide ample resource for MAC, PCS, and traffic-manager functions, while the 3,423,744 embedded memory bits absorb packet-buffer bursts. Compared to discrete transceiver-plus-FPGA designs, the GX integration reduces BOM, board area, and inter-chip latency. Placed on the line card with a multi-rail DC-DC power tree and 0.8 mm-pitch BGA escape, the device delivers deterministic 10 GbE throughput across the industrial -40 C to +100 C range.
Recommandé
Serial RapidIO Bridge / Switch
The EP1SGX40GF1020I5 fits Serial RapidIO bridge and switch fabrics because its multi-gigabit transceivers natively support 1.25 Gbps, 2.5 Gbps, and 3.125 Gbps SRIO physical-layer rates while the 41,250 logic elements implement the SRIO logical layer, transport layer, and maintenance operations. The 1020-ball FC-FBGA package provides the signal integrity and pin count needed for four or more SRIO links plus parallel control interfaces. Designers integrate packet buffering in the 3.4 Mbits of TriMatrix memory and accelerate CRC/scheduling with the 384 hardware multipliers. The industrial temperature grade makes the part appropriate for ruggedized embedded-computing applications such as defence signal processing.
Recommandé
PCI Express Endpoint Card
The EP1SGX40GF1020I5 is a natural choice for PCI Express Gen1/Gen2 endpoint cards because its transceivers support the 2.5 Gbps and 5.0 Gbps line rates of PCIe 1.1/2.0 directly, eliminating an external PHY. The 41,250 logic elements implement the PIPE-mapped PCIe IP core, transaction layer, and application logic, while 3,423,744 embedded memory bits serve as completion-header and payload buffers. Industrial temperature rating allows deployment in servers, base stations, and industrial-control backplanes. The 1020-ball FC-FBGA's short electrical paths meet PCIe channel-loss budgets, and the I-grade speed bin provides robust timing margins on multi-lane Gen2 links. Power design must allocate separate rails for the PCIe analogue transceiver block and the core logic to meet jitter specifications.
Recommandé
Wireless Base-Station Baseband
The EP1SGX40GF1020I5 fits wireless base-station baseband processing because its 384 9x9 hardware multipliers and 41,250 logic elements execute the symbol-rate DSP pipelines for WCDMA, LTE, and WiMAX while the multi-gigabit transceivers carry digitized RF to and from the radio card. The 3.4 Mbits of TriMatrix memory accommodates channel-estimation tables and HARQ buffer windows. Industrial temperature rating supports outdoor cabinet and tower-top deployments. The 1020-ball FC-FBGA integrates cleanly with high-layer-count baseband PCBs and supports the antenna-card CPRI/OBSAI backhaul links. Compared with DSP-only architectures, the GX's logic+memory balance accelerates multi-mode base-station designs.
Recommandé
Broadcast Video Routing / Switchers
The EP1SGX40GF1020I5 supports broadcast video routers and switchers because its multi-gigabit transceivers handle SDI, HD-SDI, 3G-SDI, and DVB-ASI serial streams while the 41,250 logic elements implement crosspoint switches, audio embedders, and ancillary-data processing. The 3.4 Mbits of embedded memory absorb frame buffering and audio-channel de-embedding tables. The industrial temperature grade and BGA package's signal integrity are well matched to broadcast-facility rack environments where thermal stability and long cable runs demand jitter tolerance. The part is also deployed in mobile broadcast trucks where compact, multi-rate serial I/O is required.
Recommandé
Storage Area Network Switch / HBA
The EP1SGX40GF1020I5 is appropriate for Fibre Channel and SAS/SATA storage-area-network switches because its integrated transceivers deliver 1.0625 Gbps, 2.125 Gbps, and 4.25 Gbps Fibre Channel rates directly to SFP modules, while the 41,250 logic elements implement FC class-3 services, frame routing, and FCP protocol state machines. The 1020-ball FC-FBGA package provides the high pin count required for multiple FC ports plus Ethernet management interfaces. The 3.4 Mbits of embedded memory hold credit-recovery and buffer-credit tables, and the 384 multipliers accelerate CRC and XOR parity computations. Industrial temperature rating allows deployment in data-centre and ruggedized edge-storage applications.
Recommandé
Industrial Test & Measurement Backplane
The EP1SGX40GF1020I5 is suited for industrial test and measurement backplane controllers because its multi-gigabit transceivers carry high-speed serial data from digitizer and arbitrary-waveform-generator mezzanines, while the 41,250 logic elements implement timing engines, trigger logic, and data-reduction DSP. The 1020-ball FC-FBGA supports dense backplane pin-out and excellent signal integrity for LVPECL/LVDS parallel paths to adjacent slots. The 3.4 Mbits of embedded memory buffer acquisition bursts and the 384 multipliers accelerate FFT/DFT pre-processing. Industrial temperature rating and the 'I' speed-grade bin make the part a strong choice for factory-floor ATE where reliability and long-life support outweigh the cost premium.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EP1SGX40GF1020I5 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EP1SGX40GF1020C7 | EP1SGX40GF1020C6 | EP1SGX40GF1020C5 | EP1SGX40GF1020C7N | EP1SGX40GF1020C8 | EP1SGX40GF1020I6N |
|---|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 1020-ball FC-FBGA | 1020-ball FC-FBGA - same | 1020-ball FC-FBGA - same | 1020-ball FC-FBGA - same | 1020-ball FC-FBGA - same | 1020-ball FC-FBGA - same | 1020-ball FC-FBGA - same |
| Logic Elements | 41,250 | 41,250 | 41,250 | 41,250 | 41,250 | 41,250 | 41,250 |
| Speed Grade | I5 (industrial, 5 bin) | C7 (commercial, 7 bin) | C6 (commercial, 6 bin) | C5 (commercial, 5 bin) | C7N (commercial, Pb-free) | C8 (commercial, 8 bin) | I6N (industrial, Pb-free) |
| Temperature Grade | Industrial (-40 C to +100 C) | Commercial (0 C to +85 C) | Commercial (0 C to +85 C) | Commercial (0 C to +85 C) | Commercial (0 C to +85 C) | Commercial (0 C to +85 C) | Industrial (-40 C to +100 C) |
| Embedded Memory Bits | 3,423,744 | 3,423,744 | 3,423,744 | 3,423,744 | 3,423,744 | 3,423,744 | 3,423,744 |
| Multi-Gigabit Transceivers | Up to 20 channels, 6.375 Gbps | Up to 20 channels, 6.375 Gbps | Up to 20 channels, 6.375 Gbps | Up to 20 channels, 6.375 Gbps | Up to 20 channels, 6.375 Gbps | Up to 20 channels, 6.375 Gbps | Up to 20 channels, 6.375 Gbps |
| Lead-Free Finish | Unknown / verify with vendor | Unknown | Unknown | Unknown | Yes (N suffix) | Unknown | Yes (N suffix) |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND | NRND |
Principaux différenciateurs
- Industrial speed grade with broader temperature range (vs EP1SGX40GF1020C7)
- Multi-gigabit transceivers integrated on die (vs EP1SGX40DF1020I5)
- Faster speed grade than legacy C7/C8 bin (vs EP1SGX40GF1020C8)
Notes de conception
The 1020-ball FC-FBGA package requires a high-layer-count PCB (10 or more layers) for fanout and escape routing. Use a 0.8 mm or 1.0 mm BGA pitch escape technique with laser-drilled microvias, and maintain a continuous reference plane under the BGA for transceiver power integrity. Decoupling must include 0.1 uF X7R capacitors within 2 mm of each power pin, plus bulk polymer/tantalum capacitors on the PCB side. Differential transceiver pairs require 100 ohm controlled-impedance routing with length matching within 150 mil (3.81 mm) for 6.375 Gbps signals.
Power estimation should be performed early using the Quartus II PowerPlay analyzer. The Stratix GX core, transceiver analogue supply, and PLL supply each require dedicated switching regulators. Estimated: at 1.5 V core with 80% utilization and 16 active transceivers at 6.375 Gbps, the device can consume 15 W or more. A multi-rail DC-DC architecture (e.g., 1.0 V, 1.5 V, 2.5 V, 3.3 V) is mandatory; isolate the transceiver analogue supply with a ferrite bead or LDO to minimize jitter coupling from digital switching noise.
Avoid mixing commercial (C-grade) and industrial (I-grade) speed bins on the same PCB; thermal-sensor calibration and PLL characteristics differ between grades. Do not assume the EP1SGX40GF1020I5 and EP1SGX40DF1020I5 share the same pinout - the DF (non-GX) variant reassigns transceiver pins to general-purpose I/O, so verify the Quartus II pinout file before reusing an existing layout. Always confirm lead-free (Pb-free) finish requirements against your assembly house's process; the bare EP1SGX40GF1020I5 may have SnPb balls, while 'N'-suffixed variants use Pb-free SAC alloy.
Informations de conformité
RoHS and lead-free status were not present in the verified web data. Intel/Altera product page should be consulted to confirm the finish of the EP1SGX40GF1020I5 specifically. Bare (non-N) Stratix GX variants historically shipped with SnPb balls; Pb-free variants carry the 'N' suffix (e.g., EP1SGX40GF1020I6N). AEC-Q100 does not apply because this is an FPGA, not an automotive-qualified simple IC.