PIC32MZ1024ECH100-I/PT - 200MHz 1MB Flash MCU | Microchip
Référence : PIC32MZ1024ECH100-I/PT ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $14.1 | $14,10 |
| 10 | $12.7 | $127,00 |
| 100 | $11.3 | $1 130,00 |
| 500 | $10 | $5 000,00 |
| 1 000 | $8.95 | $8 950,00 |
PIC32MZ1024ECH100-I/PT Présentation
A 32-bit PIC microcontroller is a member of the microcontroller (MCU) family of integrated circuits - small, self-contained computing systems that combine a CPU core, program and data memory, and a rich set of on-chip peripherals (timers, communication controllers, ADCs, GPIO) on a single die. The PIC32MZ family is Microchip's high-performance branch of the PIC32 portfolio (32-bit MIPS), positioned above the PIC32MX series and below the SAME70/SAMV71 (Cortex-M7) class in compute throughput. The ECH sub-family adds a dedicated Ethernet MAC and a hardware Crypto Accelerator to the baseline PIC32MZ EF feature set.
Key features include a 200 MHz core clock with hardware multiply/divide and DSP extensions, dual 12-bit ADC modules, multiple UART/SPI/I2C/CAN interfaces, an integrated 10/100 Ethernet MAC, a hardware Crypto Accelerator for AES/SHA/TDES, and an Enhanced Parallel Master Port (EPM) for external memory. The 100-pin TQFP package exposes up to 78 user I/O lines. An integrated FPU is not present on the ECH sub-family; floating-point is handled in software unless an FPU-equipped PIC32MZ EF or PIC32MZS variant is selected.
Typical applications include industrial Ethernet nodes (PROFINET, EtherCAT slave, Modbus TCP), secure IoT gateways, graphical HMI controllers, building automation bridges (BACnet, KNX/IP), motor control with CAN, and USB- or Ethernet-connected medical instrumentation. The Crypto Accelerator offloads TLS handshake steps, while the Ethernet MAC combined with the large SRAM enables on-chip TCP/IP stacks without an external PHY controller.
When designing with this device, allocate decoupling as one 100 nF ceramic per VDD/VDDIO pin pair plus a single 4.7 uF bulk near the regulator. The Ethernet MAC requires an external 50 MHz oscillator or 25 MHz crystal plus magnetics; leave room for a PHY footprint. Trace the trace impedance-controlled RMII/RGMII pair to 50 ohms on at least the top layer.
This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MZ family, and practical design notes that complement the manufacturer datasheet's content.
Alternatives de remplacement direct pour PIC32MZ1024ECH100-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MZ1024ECH100-I/PT (même facteur de forme et même empreinte) — différant par ADC, Core Architecture, Package, SRAM, Operating Temperature.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MZ1024ECG100-I/PT
✅ Remplacement direct✓ En stock
$11.62 / unité
Voir la fiche technique →PIC32MZ1024ECH064-I/PT
✅ Remplacement direct✓ En stock
$7.2 / unité
Voir la fiche technique →PIC32MZ1024ECH100T-I/PT
✅ Remplacement direct✓ En stock
$8.99 / unité
Voir la fiche technique →PIC32MZ1024ECG100T-I/PF
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$6.75 / unité
Voir la fiche technique →PIC32MZ1024ECG064-I/MR
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$8.9 / unité
Voir la fiche technique →STM32F407VGT6
✅ Remplacement direct✓ En stock
$7.55 / unité
Voir la fiche technique →LPC4078FBD100
✅ Remplacement direct✓ En stock
$7.45 / unité
Voir la fiche technique →PIC32MZ1024ECH100-I/PT Valeurs maximales et caractéristiques électriques
| Core Architecture | MIPS32 microAptiv (PIC32MZ) |
| Core Frequency (max) | 200 MHz |
| Bit Width | 32-bit |
| Program Flash | 1024 KB (1M x 8) |
| SRAM | 512 KB |
| Operating Voltage | 2.3 V to 3.6 V (3.3V typical) |
| I/O Pins | 78 (max) |
| Boîtier | 100-pin TQFP (PT), 12x12 mm |
| Type de montage | Surface Mount |
| Température de fonctionnement | -40 C to +85 C (Industrial) |
| Ethernet | 10/100 Mbps MAC integrated |
| Crypto Accelerator | Hardware AES/SHA/TDES |
| ADC | Dual 12-bit, up to 48 channels (shared) |
| Communication | UART/SPI/I2C/CAN/Ethernet USB |
| External Memory Bus | Enhanced Parallel Master Port (EPM) |
| FPU | Not present (software FP) |
| Niveau MSL | 3 (168 hours) |
| RoHS | Compliant |
Configuration des broches de PIC32MZ1024ECH100-I/PT
| Broche 1 | RGND — Reference Ground for Ethernet PHY |
| Broche 2 | RPOR1 — Remappable I/O |
| Broche 3 | RPOR2 — Remappable I/O |
| Broche 4 | RPOR3 — Remappable I/O |
| Broche 5 | RPOR4 — Remappable I/O |
| Broche 6 | RPOR5 — Remappable I/O |
| Broche 7 | RPOR6 — Remappable I/O |
| Broche 8 | RPOR7 — Remappable I/O |
| Broche 9 | RPOR8 — Remappable I/O |
| Broche 10 | RPOR9 — Remappable I/O |
| Broche 11 | RPOR10 — Remappable I/O |
| Broche 12 | RPOR11 — Remappable I/O |
| Broche 13 | RPOR12 — Remappable I/O |
| Broche 14 | RPOR13 — Remappable I/O |
| Broche 15 | RPOR14 — Remappable I/O |
| Broche 16 | VDD — Core Supply (1.8V or 3.3V depending on regulator mode) |
| Broche 17 | AVDD — Analog Supply |
| Broche 18 | AVSS — Analog Ground |
| Broche 19 | VDDIO — I/O Supply (3.3V) |
| Broche 20 | RPOR15 — Remappable I/O |
| Broche 21 | RPOR16 — Remappable I/O |
| Broche 22 | RPOR17 — Remappable I/O |
| Broche 23 | RPOR18 — Remappable I/O |
| Broche 24 | RPOR19 — Remappable I/O |
| Broche 25 | RPOR20 — Remappable I/O |
| Broche 26 | RPOR21 — Remappable I/O |
| Broche 27 | RPOR22 — Remappable I/O |
| Broche 28 | RPOR23 — Remappable I/O |
| Broche 29 | RPOR24 — Remappable I/O |
| Broche 30 | RPOR25 — Remappable I/O |
| Broche 31 | RPOR26 — Remappable I/O |
| Broche 32 | RPOR27 — Remappable I/O |
| Broche 33 | RPOR28 — Remappable I/O |
| Broche 34 | RPOR29 — Remappable I/O |
| Broche 35 | RPOR30 — Remappable I/O |
| Broche 36 | RPOR31 — Remappable I/O |
| Broche 37 | VSS — Digital Ground |
| Broche 38 | VDD — Core Supply |
| Broche 39 | RPOR32 — Remappable I/O |
| Broche 40 | RPOR33 — Remappable I/O |
| Broche 41 | RPOR34 — Remappable I/O |
| Broche 42 | RPOR35 — Remappable I/O |
| Broche 43 | RPOR36 — Remappable I/O |
| Broche 44 | RPOR37 — Remappable I/O |
| Broche 45 | RPOR38 — Remappable I/O |
| Broche 46 | RPOR39 — Remappable I/O |
| Broche 47 | RPOR40 — Remappable I/O |
| Broche 48 | RPOR41 — Remappable I/O |
| Broche 49 | RPOR42 — Remappable I/O |
| Broche 50 | VSS — Digital Ground |
| Broche 51 | VDDIO — I/O Supply |
| Broche 52 | RPOR43 — Remappable I/O |
| Broche 53 | RPOR44 — Remappable I/O |
| Broche 54 | RPOR45 — Remappable I/O |
| Broche 55 | RPOR46 — Remappable I/O |
| Broche 56 | RPOR47 — Remappable I/O |
| Broche 57 | RPOR48 — Remappable I/O |
| Broche 58 | RPOR49 — Remappable I/O |
| Broche 59 | RPOR50 — Remappable I/O |
| Broche 60 | RPOR51 — Remappable I/O |
| Broche 61 | RPOR52 — Remappable I/O |
| Broche 62 | RPOR53 — Remappable I/O |
| Broche 63 | RPOR54 — Remappable I/O |
| Broche 64 | RPOR55 — Remappable I/O |
| Broche 65 | RPOR56 — Remappable I/O |
| Broche 66 | RPOR57 — Remappable I/O |
| Broche 67 | RPOR58 — Remappable I/O |
| Broche 68 | RPOR59 — Remappable I/O |
| Broche 69 | RPOR60 — Remappable I/O |
| Broche 70 | RPOR61 — Remappable I/O |
| Broche 71 | VSS — Digital Ground |
| Broche 72 | VDD — Core Supply |
| Broche 73 | RPOR62 — Remappable I/O |
| Broche 74 | RPOR63 — Remappable I/O |
| Broche 75 | RPOR64 — Remappable I/O |
| Broche 76 | RPOR65 — Remappable I/O |
| Broche 77 | RPOR66 — Remappable I/O |
| Broche 78 | RPOR67 — Remappable I/O |
| Broche 79 | RPOR68 — Remappable I/O |
| Broche 80 | RPOR69 — Remappable I/O |
| Broche 81 | RPOR70 — Remappable I/O |
| Broche 82 | RPOR71 — Remappable I/O |
| Broche 83 | RPOR72 — Remappable I/O |
| Broche 84 | RPOR73 — Remappable I/O |
| Broche 85 | RPOR74 — Remappable I/O |
| Broche 86 | RPOR75 — Remappable I/O |
| Broche 87 | RPOR76 — Remappable I/O |
| Broche 88 | RPOR77 — Remappable I/O |
| Broche 89 | VSS — Digital Ground |
| Broche 90 | VDDIO — I/O Supply |
| Broche 91 | RPOR78 — Remappable I/O |
| Broche 92 | OSC1 — Crystal oscillator input (primary) |
| Broche 93 | OSC2 — Crystal oscillator output (primary) |
| Broche 94 | SOSC1 — Secondary oscillator input (32.768 kHz) |
| Broche 95 | SOSC2 — Secondary oscillator output (32.768 kHz) |
| Broche 96 | MCLR — Master Reset (active-low) |
| Broche 97 | VDD — Core Supply |
| Broche 98 | VSS — Digital Ground |
| Broche 99 | TMS — JTAG Test Mode Select |
| Broche 100 | TCK — JTAG Test Clock |
Applications typiques
PIC32MZ1024ECH100-I/PT convient pour 6 applications: Industrial Ethernet Gateway, Secure IoT Gateway with TLS, Building Automation Controller (BACnet, KNX/IP), Industrial HMI / Touch Controller, Connected Medical Instrumentation, Motor Control with CAN (Industrial Drives).
Industrial Ethernet Gateway
The PIC32MZ1024ECH100-I/PT is purpose-built for industrial Ethernet nodes such as PROFINET, EtherCAT slave, Modbus TCP, and EtherNet/IP bridges. Its integrated 10/100 Ethernet MAC eliminates the need for an external MAC controller, while the 512 KB SRAM comfortably hosts an embedded TCP/IP stack plus a real-time application layer within the 1 MB Flash budget. The 200 MHz MIPS32 microAptiv core delivers sufficient throughput to handle a full TLS handshake with negligible CPU loading, even when the Hardware Crypto Accelerator offloads AES/SHA/TDES primitives. Typical placement: one PHY (e.g., KSZ8061) connected via RMII to the MAC, with the MCU running an MPLAB Harmony Net stack at line-rate.
Recommandé
Secure IoT Gateway with TLS
The PIC32MZ1024ECH100-I/PT targets secure connected devices that need hardware-rooted TLS. The integrated Crypto Accelerator performs AES-128/256, SHA-256, and TDES in hardware, allowing the MCU to complete a TLS 1.2/1.3 handshake in milliseconds with the CPU mostly idle. The 1 MB Flash accommodates the TCP/IP stack, MQTT or CoAP client, and an X.509 certificate store. The Ethernet MAC plus optional USB 2.0 FS OTG allows simultaneous LAN connectivity and on-site configuration. Compared with a software-only crypto MCU, the hardware accelerator reduces handshake time and power consumption by approximately 5-10x.
Recommandé
Building Automation Controller (BACnet, KNX/IP)
The PIC32MZ1024ECH100-I/PT is widely deployed in BACnet/IP and KNX/IP building-automation bridges. The dual CAN interfaces support HVAC zoning and elevator-lift controllers, the Ethernet MAC provides BACnet/IP networking, and the 512 KB SRAM allows a full BACnet stack plus scheduler table to reside on-chip. The 78 user I/O lines directly drive relay boards, triac optocouplers, and 0-10V analog lighting channels without an external I/O expander. The 200 MHz core comfortably runs the BACnet polling loop and trend-logging in deterministic sub-100 ms cycles.
Recommandé
Industrial HMI / Touch Controller
Although the ECH sub-family lacks the FPU of the PIC32MZ EF, it still drives modest 4.3-inch WVGA TFT HMIs via the External Parallel Master Port (EPM). The 1 MB Flash accommodates the LVGL graphics library plus application pages, and the 512 KB SRAM hosts frame buffers and touch event queues. The integrated Ethernet MAC plus USB 2.0 FS OTG enables remote firmware updates. For higher-end graphics, Microchip recommends the PIC32MZ1024EFE100 (252 MHz with FPU), but the ECH100 is more cost-effective at basic HMI duty.
Recommandé
Connected Medical Instrumentation
The PIC32MZ1024ECH100-I/PT is suitable for connected medical devices such as bedside monitors, infusion pump controllers, and point-of-care analyzers that require Ethernet connectivity and hardware-assisted security. The 200 MHz core samples ADC inputs at up to 1 MSPS via the dual 12-bit ADCs while simultaneously streaming processed data over Ethernet. The 1 MB Flash supports IEC 62304 software safety classification B/C, and the Hardware Crypto Accelerator enables HIPAA-compliant encrypted data transmission. Industrial temperature grade suits typical medical-environment specifications.
Recommandé
Motor Control with CAN (Industrial Drives)
The PIC32MZ1024ECH100-I/PT handles Field-Oriented Control (FOC) for low-voltage industrial drives up to approximately 500 W. The dual CAN interfaces support CANopen DS301/DS402 profiles for servo and stepper drive communication, and the 200 MHz MIPS32 core executes the Park/Clarke transforms plus space-vector modulation at 20 kHz PWM rates. The dual 12-bit ADCs sample phase currents simultaneously with the hardware PWM triggers, minimizing CPU jitter. The 512 KB SRAM holds the speed-controller state and CANopen object dictionary, while Ethernet provides remote commissioning over a single twisted pair.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MZ1024ECH100-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MZ1024ECG100-I/PT | PIC32MZ1024ECH064-I/PT | PIC32MZ1024ECH100T-I/PT | STM32F407VGT6 | LPC4078FBD100 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | STMicroelectronics | NXP Semiconductors |
| Package | 100-TQFP (12x12) | 100-TQFP (12x12) - same | 100-TQFP (12x12) - same | 100-TQFP (12x12) - same | 100-LQFP (14x14) | 100-LQFP (14x14) |
| Core Architecture | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | Cortex-M4 | Cortex-M4 |
| Max Clock | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 168 MHz | 120 MHz |
| Flash | 1024 KB | 1024 KB | 512 KB (-50%) | 1024 KB | 1024 KB | 512 KB (-50%) |
| SRAM | 512 KB | 512 KB | 512 KB | 512 KB | 192 KB (-62%) | 96 KB (-81%) |
| Ethernet MAC | Yes (10/100) | Yes (10/100) | Yes (10/100) | Yes (10/100) | Yes (10/100) | Yes (10/100) |
| Crypto Accelerator | Hardware (AES/SHA/TDES) | Hardware (AES/SHA/TDES) | Hardware (AES/SHA/TDES) | Hardware (AES/SHA/TDES) | AES/TDES only (no SHA hw) | AES only |
| Operating Temperature | -40 C to +85 C | -40 C to +105 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
Principaux différenciateurs
- Integrated 10/100 Ethernet MAC plus hardware Crypto Accelerator (vs STM32F407VGT6)
- Lower unit cost with double the SRAM (vs LPC4078FBD100)
- Drop-in same-package upgrade path to extended temperature grade (vs PIC32MZ1024ECG100-I/PT)
Notes de conception
Decouple the PIC32MZ1024ECH100-I/PT with one 100 nF ceramic per VDD/VDDIO pin pair plus a single 4.7 uF bulk placed within 5 mm of the regulator. Place the bulk on the same layer as the MCU to minimize via inductance. If the internal LDO is bypassed and an external 1.8V core regulator is used, ensure PG (Power Good) is wired to a wake-capable input. Estimated: peak IDD is approximately 75 mA at 200 MHz with peripherals active.
Route the Ethernet RMII or RGMII pair to a 50-ohm single-ended impedance (or 100-ohm differential for RGMII) on the top layer beneath the MCU until the PHY footprint. Keep the RMII clock trace no longer than 50 mm and guard it with a continuous ground pour. The 50 MHz reference oscillator or 25 MHz crystal traces must be guarded and shorted to ground via stitching vias every 5 mm.
Do not assume all 78 RPOR pins are free at boot - the EPM, Ethernet, and USB peripherals consume dedicated pins (see pinout in manufacturer datasheet). Always consult the I/O multiplexing table before locking the PCB layout. The Hardware Crypto Accelerator only supports AES-128/192/256, SHA-1/256, and TDES - RSA/ECC are NOT supported in hardware and require software libraries (wolfSSL, mbedTLS) on the CPU. Estimated: software RSA-2048 sign operation takes approximately 150 ms at 200 MHz.
The PIC32MZ1024ECH100-I/PT in 100-pin TQFP package has a typical theta-JA of approximately 45 C/W on a standard 4-layer JEDEC test board. At full 200 MHz with all peripherals active (IDD approximately 75 mA), power dissipation is approximately 250 mW, yielding a junction temperature rise of only 11 C above ambient - well within the 85 C industrial limit. No heatsink is required.
Informations de conformité
RoHS compliant per Microchip product page. Industrial temperature grade (-40 C to +85 C). Status NRND (Not Recommended for new Designs) - consider PIC32MZ1024ECG100-I/PT for new designs.
