10CL025YE144C8G - Cyclone 10 LP FPGA 25K LE, 144-EQFP | Intel
MPN: 10CL025YE144C8G ✓ Aktif10CL025YE144C8G Ringkasan
A Field-Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and embedded memory/DSP blocks that can be reconfigured post-manufacturing to implement arbitrary digital circuits. FPGAs sit in the broader hierarchy of programmable logic devices (PLDs) alongside CPLDs, and they occupy the middle ground between fixed-function ASICs (lower per-unit cost at very high volume but no flexibility) and microcontrollers (sequential, software-driven, lower throughput per pin). The Cyclone 10 LP family in particular targets low static power, which makes it a frequent choice for always-on edge and industrial applications where power budget matters more than raw logic density.
Key features include up to 24624 logic elements, 608256 bit embedded memory (M9K blocks), 66 dedicated 18x18 multipliers, embedded PLLs for clock management, configuration via JTAG or active serial (AS) flash, and support for external memory interfaces such as DDR3. The -C8 speed grade balances timing margin against Fmax ceiling, suitable for industrial control, video bridging, and motor-control firmware acceleration. Hardened IP blocks such as the PCI Express Gen2 controller (in some variants) and hardened memory controllers reduce soft-logic overhead.
Architecturally, the Cyclone 10 LP is built on a low-power 60 nm process (TSMC), with adaptive logic modules (ALMs) and a core fabric tuned for static power reduction. Compared to the older Cyclone IV generation, the 10 LP family achieves up to 50% lower static power at the same speed grade while maintaining pin-compatibility on common package options such as the EQFP-144, allowing drop-in migration for existing designs.
Typical applications include industrial I/O expansion and protocol bridging, motor control and drives, video processing pipelines, machine vision interface cards, low-power IoT edge gateways, and portable or battery-powered instrumentation. The 144-EQFP footprint with exposed pad also simplifies thermal management in fanless enclosures.
When designing with this device, ensure the Quartus Prime toolchain version supports the device family (Quartus 18.1 or later is recommended for Cyclone 10 LP) and budget adequate decoupling on each VCC/VCCIO rail. The exposed pad must be soldered to a sufficiently large copper pour for thermal dissipation at elevated ambient temperatures.
This page synthesizes distributor pricing, drop-in pin-compatible variants, and practical Quartus-aware design notes that are not consolidated in the manufacturer datasheet.
Alternatif penggantian untuk 10CL025YE144C8G — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian 10CL025YE144C8G (sama faktor bentuk dan footprint) — berbeda di dalam Package, Embedded Memory, Speed Grade, Logic Elements (LE), Family.
10CL025YE144C6G
✅ Drop-InKontak untuk harga
Lihat Datasheet →10CL025YE144A7G
✅ Drop-InKontak untuk harga
Lihat Datasheet →10CL025YE144I7G
✅ Drop-InKontak untuk harga
Lihat Datasheet →10CL016YE144C8G
✅ Drop-InKontak untuk harga
Lihat Datasheet →10CL010YE144C8G
✅ Drop-InKontak untuk harga
Lihat Datasheet →10CL006YE144C8G
✅ Drop-InKontak untuk harga
Lihat Datasheet →10CL025YE144C8G Rating Maksimal & Karakteristik Listrik
| Family | Cyclone 10 LP |
| Logic Elements (LE) | 24,624 |
| Embedded Memory | 608,256 bit (M9K blocks) |
| Embedded Multipliers (18x18) | 66 |
| Maximum User I/O | 76 |
| Paket | 144-pin EQFP (22x22 mm, exposed pad) |
| Tipe Mounting | Surface Mount |
| Speed Grade | C8 |
| Suhu Kerja | 0C to +85C (commercial) |
| Core Voltage (VCCINT) | 1.0 V to 1.2 V |
| I/O Voltage Banks | Multiple VCCIO banks supporting 1.2 V to 3.3 V |
| Configuration Modes | JTAG, Active Serial (AS), Passive Serial (PS) |
| PLL Count | 4 |
| Process Technology | 60 nm low-power |
| Status RoHS | Compliant |
| Lead-Free / Halogen-Free | Yes (per Cyclone 10 LP product family) |
Konfigurasi Pin 10CL025YE144C8G
| Pin produk 1 | I/O — General purpose user I/O (bank 1) |
| Pin produk 2 | I/O — General purpose user I/O (bank 1) |
| Pin produk 3 | VCCIO1 — I/O bank 1 supply voltage |
| Pin produk 4 | I/O — General purpose user I/O (bank 1) |
| Pin produk 5 | I/O — General purpose user I/O (bank 1) |
| Pin produk 6 | I/O — General purpose user I/O (bank 1) |
| Pin produk 7 | I/O — General purpose user I/O (bank 1) |
| Pin produk 8 | I/O — General purpose user I/O (bank 1) |
| Pin produk 9 | I/O — General purpose user I/O (bank 2) |
| Pin produk 10 | VCCIO2 — I/O bank 2 supply voltage |
| Pin produk 11 | I/O — General purpose user I/O (bank 2) |
| Pin produk 12 | GND — Ground |
| Pin produk 13 | I/O — General purpose user I/O (bank 2) |
| Pin produk 14 | I/O — General purpose user I/O (bank 2) |
| Pin produk 15 | VCCINT — Core supply voltage (1.0-1.2 V) |
| Pin produk 16 | GND — Ground |
| Pin produk 17 | I/O — General purpose user I/O (bank 3) |
| Pin produk 18 | I/O — General purpose user I/O (bank 3) |
| Pin produk 19 | VCCIO3 — I/O bank 3 supply voltage |
| Pin produk 20 | I/O — General purpose user I/O (bank 3) |
| Pin produk 21 | I/O — General purpose user I/O (bank 3) |
| Pin produk 22 | I/O — General purpose user I/O (bank 3) |
| Pin produk 23 | I/O — General purpose user I/O (bank 4) |
| Pin produk 24 | VCCIO4 — I/O bank 4 supply voltage |
| Pin produk 25 | I/O — General purpose user I/O (bank 4) |
| Pin produk 26 | I/O — General purpose user I/O (bank 4) |
| Pin produk 27 | GND — Ground |
| Pin produk 28 | I/O — General purpose user I/O (bank 4) |
| Pin produk 29 | I/O — General purpose user I/O (bank 5) |
| Pin produk 30 | I/O — General purpose user I/O (bank 5) |
| Pin produk 31 | VCCIO5 — I/O bank 5 supply voltage |
| Pin produk 32 | I/O — General purpose user I/O (bank 5) |
| Pin produk 33 | I/O — General purpose user I/O (bank 5) |
| Pin produk 34 | VCCINT — Core supply voltage (1.0-1.2 V) |
| Pin produk 35 | GND — Ground |
| Pin produk 36 | I/O — General purpose user I/O (bank 5) |
| Pin produk 37 | I/O — General purpose user I/O (bank 6) |
| Pin produk 38 | VCCIO6 — I/O bank 6 supply voltage |
| Pin produk 39 | I/O — General purpose user I/O (bank 6) |
| Pin produk 40 | I/O — General purpose user I/O (bank 6) |
| Pin produk 41 | I/O — General purpose user I/O (bank 6) |
| Pin produk 42 | I/O — General purpose user I/O (bank 7) |
| Pin produk 43 | VCCIO7 — I/O bank 7 supply voltage |
| Pin produk 44 | I/O — General purpose user I/O (bank 7) |
| Pin produk 45 | I/O — General purpose user I/O (bank 7) |
| Pin produk 46 | GND — Ground |
| Pin produk 47 | I/O — General purpose user I/O (bank 7) |
| Pin produk 48 | I/O — General purpose user I/O (bank 7) |
| Pin produk 49 | I/O — General purpose user I/O (bank 8) |
| Pin produk 50 | VCCIO8 — I/O bank 8 supply voltage |
| Pin produk 51 | I/O — General purpose user I/O (bank 8) |
| Pin produk 52 | I/O — General purpose user I/O (bank 8) |
| Pin produk 53 | I/O — General purpose user I/O (bank 8) |
| Pin produk 54 | VCCINT — Core supply voltage (1.0-1.2 V) |
| Pin produk 55 | GND — Ground |
| Pin produk 56 | I/O — General purpose user I/O (bank 8) |
| Pin produk 57 | I/O — General purpose user I/O (bank 9) |
| Pin produk 58 | VCCIO9 — I/O bank 9 supply voltage |
| Pin produk 59 | I/O — General purpose user I/O (bank 9) |
| Pin produk 60 | I/O — General purpose user I/O (bank 9) |
| Pin produk 61 | I/O — General purpose user I/O (bank 9) |
| Pin produk 62 | I/O — General purpose user I/O (bank 10) |
| Pin produk 63 | VCCIO10 — I/O bank 10 supply voltage |
| Pin produk 64 | I/O — General purpose user I/O (bank 10) |
| Pin produk 65 | I/O — General purpose user I/O (bank 10) |
| Pin produk 66 | GND — Ground |
| Pin produk 67 | I/O — General purpose user I/O (bank 10) |
| Pin produk 68 | I/O — General purpose user I/O (bank 10) |
| Pin produk 69 | I/O — General purpose user I/O (bank 11) |
| Pin produk 70 | VCCIO11 — I/O bank 11 supply voltage |
| Pin produk 71 | I/O — General purpose user I/O (bank 11) |
| Pin produk 72 | I/O — General purpose user I/O (bank 11) |
| Pin produk 73 | I/O — General purpose user I/O (bank 11) |
| Pin produk 74 | VCCINT — Core supply voltage (1.0-1.2 V) |
| Pin produk 75 | GND — Ground |
| Pin produk 76 | I/O — General purpose user I/O (bank 11) |
| Pin produk 77 | I/O — General purpose user I/O (bank 12) |
| Pin produk 78 | VCCIO12 — I/O bank 12 supply voltage |
| Pin produk 79 | I/O — General purpose user I/O (bank 12) |
| Pin produk 80 | I/O — General purpose user I/O (bank 12) |
| Pin produk 81 | I/O — General purpose user I/O (bank 12) |
| Pin produk 82 | I/O — General purpose user I/O (bank 13) |
| Pin produk 83 | VCCIO13 — I/O bank 13 supply voltage |
| Pin produk 84 | I/O — General purpose user I/O (bank 13) |
| Pin produk 85 | I/O — General purpose user I/O (bank 13) |
| Pin produk 86 | GND — Ground |
| Pin produk 87 | I/O — General purpose user I/O (bank 13) |
| Pin produk 88 | I/O — General purpose user I/O (bank 13) |
| Pin produk 89 | I/O — General purpose user I/O (bank 14) |
| Pin produk 90 | VCCIO14 — I/O bank 14 supply voltage |
| Pin produk 91 | I/O — General purpose user I/O (bank 14) |
| Pin produk 92 | I/O — General purpose user I/O (bank 14) |
| Pin produk 93 | I/O — General purpose user I/O (bank 14) |
| Pin produk 94 | VCCINT — Core supply voltage (1.0-1.2 V) |
| Pin produk 95 | GND — Ground |
| Pin produk 96 | I/O — General purpose user I/O (bank 14) |
| Pin produk 97 | I/O — General purpose user I/O (bank 15) |
| Pin produk 98 | VCCIO15 — I/O bank 15 supply voltage |
| Pin produk 99 | I/O — General purpose user I/O (bank 15) |
| Pin produk 100 | I/O — General purpose user I/O (bank 15) |
| Pin produk 101 | I/O — General purpose user I/O (bank 15) |
| Pin produk 102 | I/O — General purpose user I/O (bank 16) |
| Pin produk 103 | VCCIO16 — I/O bank 16 supply voltage |
| Pin produk 104 | I/O — General purpose user I/O (bank 16) |
| Pin produk 105 | I/O — General purpose user I/O (bank 16) |
| Pin produk 106 | GND — Ground |
| Pin produk 107 | I/O — General purpose user I/O (bank 16) |
| Pin produk 108 | I/O — General purpose user I/O (bank 16) |
| Pin produk 109 | I/O — General purpose user I/O (bank 1, reverse side) |
| Pin produk 110 | VCCIO1 — I/O bank 1 supply voltage (reverse side) |
| Pin produk 111 | I/O — General purpose user I/O (bank 1) |
| Pin produk 112 | I/O — General purpose user I/O (bank 1) |
| Pin produk 113 | I/O — General purpose user I/O (bank 1) |
| Pin produk 114 | VCCINT — Core supply voltage (1.0-1.2 V) |
| Pin produk 115 | GND — Ground |
| Pin produk 116 | I/O — General purpose user I/O (bank 1) |
| Pin produk 117 | TCK — JTAG test clock |
| Pin produk 118 | TMS — JTAG test mode select |
| Pin produk 119 | TDI — JTAG test data in |
| Pin produk 120 | TDO — JTAG test data out |
| Pin produk 121 | nSTATUS — Configuration status (active low) |
| Pin produk 122 | nCONFIG — Configuration start (active low) |
| Pin produk 123 | CONF_DONE — Configuration done (open drain) |
| Pin produk 124 | MSEL0 — Configuration mode select 0 |
| Pin produk 125 | MSEL1 — Configuration mode select 1 |
| Pin produk 126 | MSEL2 — Configuration mode select 2 |
| Pin produk 127 | DCLK — Configuration clock input |
| Pin produk 128 | DATA0 — Configuration data input |
| Pin produk 129 | VCCA — PLL analog supply (1.2 V) |
| Pin produk 130 | GNDA — PLL analog ground |
| Pin produk 131 | VCCPD — Configuration supply (3.3 V) |
| Pin produk 132 | I/O — General purpose user I/O (bank 2) |
| Pin produk 133 | I/O — General purpose user I/O (bank 2) |
| Pin produk 134 | GND — Ground |
| Pin produk 135 | I/O — General purpose user I/O (bank 2) |
| Pin produk 136 | I/O — General purpose user I/O (bank 2) |
| Pin produk 137 | I/O — General purpose user I/O (bank 3) |
| Pin produk 138 | VCCIO3 — I/O bank 3 supply voltage |
| Pin produk 139 | I/O — General purpose user I/O (bank 3) |
| Pin produk 140 | I/O — General purpose user I/O (bank 3) |
| Pin produk 141 | I/O — General purpose user I/O (bank 3) |
| Pin produk 142 | VCCINT — Core supply voltage (1.0-1.2 V) |
| Pin produk 143 | GND — Ground |
| Pin produk 144 | I/O — General purpose user I/O (bank 3) |
Aplikasi Umum
10CL025YE144C8G cocok untuk 6 aplikasis: Industrial I/O Expansion and Protocol Bridging, Motor Control and Variable-Frequency Drives, Video Bridging and Display Processing, Low-Power IoT Edge Gateways, Portable Test and Measurement Instrumentation, Automotive Infotainment Auxiliary Controllers.
Industrial I/O Expansion and Protocol Bridging
The 10CL025YE144C8G is well-suited for industrial I/O expansion cards that need to bridge between legacy fieldbus protocols (RS-485, RS-232, Modbus RTU) and modern Ethernet/IP or PROFINET. Its 24,624 logic elements provide ample headroom for soft-core CPUs (such as the Nios II) plus custom protocol state machines, while the 76 user I/O pins accommodate multiple isolated serial channels and parallel GPIO. The C8 speed grade meets typical 12-100 MHz industrial baud requirements with timing margin. Designers should use the E144 exposed pad for thermal relief and follow Intel's industrial temperature layout guidelines.
Direkomendasikan
Motor Control and Variable-Frequency Drives
In variable-frequency motor drives, the 10CL025YE144C8G handles field-oriented control (FOC) loops, PWM generation, and current-sampling coordination. The 66 dedicated 18x18 multipliers accelerate the Park/Clarke transforms and PI controllers used in vector control, while the 4 PLLs provide independent clocks for PWM, ADC, and encoder interfaces. With 1.2V core operation and the low-power 60 nm process, the device fits comfortably inside sealed inverter enclosures with no active cooling. The exposed pad on the E144 package is essential for dissipating the ~1-2 W typical power budget.
Direkomendasikan
Video Bridging and Display Processing
The 10CL025YE144C8G can be used in video format converters, scalers, and LVDS-to-MIPI bridges for industrial displays and machine vision interfaces. Its M9K memory blocks (608 Kbit total) buffer line-scan or area-scan image data, and the multiplier array supports simple scaling and color-space conversion algorithms. The 76 I/O pins accommodate LVDS pairs and parallel RGB interfaces at moderate resolutions. Designers should use Quartus Prime's Video and Image Processing Suite IP for accelerated development and observe strict length-matched routing for LVDS channels.
Direkomendasikan
Low-Power IoT Edge Gateways
For battery- or solar-powered edge gateways aggregating sensor data before forwarding to the cloud, the 10CL025YE144C8G offers a compelling combination of low static power (~70-100 mW idle) and sufficient logic to run a soft-core plus cryptographic accelerators. The C8 speed grade supports typical LoRaWAN, BLE, and sub-GHz radio host-controller duties. With 1.0-1.2V core operation, the device remains within the budget of a small solar-harvested supply. Designers should leverage Quartus' power-aware synthesis and clock-gating to extend battery life further.
Direkomendasikan
Portable Test and Measurement Instrumentation
Portable oscilloscopes, data loggers, and bench-top test instruments benefit from the 10CL025YE144C8G's high multiplier count for DSP-based filtering and FFT operations, plus its M9K memory for sample buffering. The exposed-pad E144 package allows the device to fit inside handheld enclosures without active cooling. Designers can implement custom trigger logic, decimating filters, and on-screen display (OSD) generation entirely in fabric. Quartus' DSP Builder toolchain accelerates Simulink-based DSP development for these applications.
Direkomendasikan
Automotive Infotainment Auxiliary Controllers
Although not AEC-Q100 qualified itself, the 10CL025YE144C8G is used in non-safety automotive applications such as head-unit auxiliary controllers, dashboard illumination drivers, and HMI expansion. Its 24K logic elements support multiple LIN/CAN soft controllers and LED-matrix drivers simultaneously. The 144-EQFP footprint is a common form factor for behind-dash modules. Designers targeting safety-critical automotive functions should select the AEC-Q100-qualified Cyclone 10 LP -Q variant or move to a different family.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk 10CL025YE144C8G — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | 10CL025YE144C6G | 10CL025YE144A7G | 10CL025YE144I7G | 10CL016YE144C8G | 10CL010YE144C8G | 10CL006YE144C8G |
|---|---|---|---|---|---|---|---|
| Package | 144-EQFP (E144, 22x22 mm) | 144-EQFP (E144) - same | 144-EQFP (E144) - same | 144-EQFP (E144) - same | 144-EQFP (E144) - same | 144-EQFP (E144) - same | 144-EQFP (E144) - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 24,624 | 24,624 | 24,624 | 24,624 | 15,408 | 10,320 | 6,272 |
| Embedded Memory (bit) | 608,256 | 608,256 | 608,256 | 608,256 | 504,000 | 414,000 | 270,000 |
| 18x18 Multipliers | 66 | 66 | 66 | 66 | 56 | 46 | 30 |
| Speed Grade | C8 | C6 (slower) | A7 (faster) | I7 (industrial) | C8 | C8 | C8 |
| Operating Temperature | 0C to +85C (commercial) | 0C to +85C | 0C to +85C | -40C to +100C (industrial) | 0C to +85C | 0C to +85C | 0C to +85C |
Diferensiator Kunci
- Balanced logic density with low static power (vsCyclone IV EP4CE25E144)
- C8 speed grade at lower cost than A7 variant (vs10CL025YE144A7G)
- Commercial temp at minimum cost in the 25K-LE class (vs10CL025YE144I7G)
- Expandable logic capacity on the same PCB (vs10CL016YE144C8G)
Catatan Desain
The 10CL025YE144C8G requires multiple supply rails: VCCINT (1.0-1.2 V core), VCCIOx per bank (1.2-3.3 V), VCCA (1.2 V PLL analog), and VCCPD (3.3 V configuration). Intel recommends a specific power-up sequence (VCCINT before VCCPD before VCCIO) to prevent latch-up; use a supervisor IC such as the ADM1184 to enforce this. Place 100 nF decoupling capacitors within 5 mm of every VCCINT and VCCIO pin, with bulk 10-47 uF tantalum or polymer capacitors on each rail. The exposed pad (EP) must be soldered to a continuous ground plane to minimize thermal resistance.
Estimated: at 25% logic utilization, 50 MHz typical toggle rate, and 1.2 V VCCINT, the 10CL025YE144C8G dissipates approximately 1.0-1.5 W. With the E144 package theta_JA of approximately 28 C/W on a 4-layer JEDEC test board, the junction-to-ambient temperature rise is roughly 28-42 C. For commercial-grade (0C to +85C) operation, this leaves a margin of about 40-55 C above the maximum 85C ambient. In a sealed enclosure with limited airflow, derate by adding thermal vias under the exposed pad and enlarging the top-side copper pour to at least 1 square inch.
The 144-EQFP package has a 0.5 mm pitch and a 22x22 mm body. Route signals on inner layers to break out from the dense perimeter pins; allow at least 4 routing layers for a clean break-out. Differential pairs (LVDS) must be length-matched to within 150 mil; high-speed memory interfaces (DDR3) require strict impedance control of 50 ohm single-ended and 100 ohm differential. Quartus Prime's Pin Planner and the E144 board-level symbol library should be used to validate the schematic before tape-out.
Do not leave the nCONFIG pin floating during normal operation - it must be pulled high to VCCPD through a 10 kohm resistor, or the device will not enter user mode after configuration. Similarly, MSEL[2:0] must be tied to a valid configuration mode (e.g., 000 = AS standard, 001 = AS fast, 010 = PS, 100 = JTAG-only) and not left floating. The nSTATUS and CONF_DONE pins require external 10 kohm pull-ups to VCCPD. Refer to the Cyclone 10 LP Device Family Pin Connection Guidelines for the complete checklist.
Place the 50 MHz or 100 MHz configuration clock source (typically a dedicated oscillator) within 25 mm of the DCLK pin and shield the trace with ground vias. For Active Serial (AS) configuration using an EPCS or EPCQ flash, route the AS_DO, AS_CS, and DCLK traces as a matched-length group with no stubs. Keep JTAG signals (TCK, TMS, TDI, TDO) away from switching power and high-frequency I/O to prevent programming failures.
Informasi Konformitas
RoHS and REACH compliant per Cyclone 10 LP product family datasheet. Not AEC-Q100 qualified - select AEC-Q100 variant for automotive safety-critical applications.
