10CL025YE144C8G - Cyclone 10 LP FPGA 25K LE, 144-EQFP | Intel
MPN: 10CL025YE144C8G ✓ نشط10CL025YE144C8G نظرة عامة
A Field-Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and embedded memory/DSP blocks that can be reconfigured post-manufacturing to implement arbitrary digital circuits. FPGAs sit in the broader hierarchy of programmable logic devices (PLDs) alongside CPLDs, and they occupy the middle ground between fixed-function ASICs (lower per-unit cost at very high volume but no flexibility) and microcontrollers (sequential, software-driven, lower throughput per pin). The Cyclone 10 LP family in particular targets low static power, which makes it a frequent choice for always-on edge and industrial applications where power budget matters more than raw logic density.
Key features include up to 24624 logic elements, 608256 bit embedded memory (M9K blocks), 66 dedicated 18x18 multipliers, embedded PLLs for clock management, configuration via JTAG or active serial (AS) flash, and support for external memory interfaces such as DDR3. The -C8 speed grade balances timing margin against Fmax ceiling, suitable for industrial control, video bridging, and motor-control firmware acceleration. Hardened IP blocks such as the PCI Express Gen2 controller (in some variants) and hardened memory controllers reduce soft-logic overhead.
Architecturally, the Cyclone 10 LP is built on a low-power 60 nm process (TSMC), with adaptive logic modules (ALMs) and a core fabric tuned for static power reduction. Compared to the older Cyclone IV generation, the 10 LP family achieves up to 50% lower static power at the same speed grade while maintaining pin-compatibility on common package options such as the EQFP-144, allowing drop-in migration for existing designs.
Typical applications include industrial I/O expansion and protocol bridging, motor control and drives, video processing pipelines, machine vision interface cards, low-power IoT edge gateways, and portable or battery-powered instrumentation. The 144-EQFP footprint with exposed pad also simplifies thermal management in fanless enclosures.
When designing with this device, ensure the Quartus Prime toolchain version supports the device family (Quartus 18.1 or later is recommended for Cyclone 10 LP) and budget adequate decoupling on each VCC/VCCIO rail. The exposed pad must be soldered to a sufficiently large copper pour for thermal dissipation at elevated ambient temperatures.
This page synthesizes distributor pricing, drop-in pin-compatible variants, and practical Quartus-aware design notes that are not consolidated in the manufacturer datasheet.
بدائل مباشرة لـ 10CL025YE144C8G — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع 10CL025YE144C8G (نفس عامل الشكل والبصمة) — يختلف في Package, Embedded Memory, Speed Grade, Logic Elements (LE), Family.
10CL025YE144C6G
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←10CL025YE144A7G
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←10CL025YE144I7G
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←10CL016YE144C8G
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←10CL010YE144C8G
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←10CL006YE144C8G
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←10CL025YE144C8G الحدود القصوى والخصائص الكهربائية
| Family | Cyclone 10 LP |
| Logic Elements (LE) | 24,624 |
| Embedded Memory | 608,256 bit (M9K blocks) |
| Embedded Multipliers (18x18) | 66 |
| Maximum User I/O | 76 |
| العلبة | 144-pin EQFP (22x22 mm, exposed pad) |
| نوع التركيب | Surface Mount |
| Speed Grade | C8 |
| درجة حرارة التشغيل | 0C to +85C (commercial) |
| Core Voltage (VCCINT) | 1.0 V to 1.2 V |
| I/O Voltage Banks | Multiple VCCIO banks supporting 1.2 V to 3.3 V |
| Configuration Modes | JTAG, Active Serial (AS), Passive Serial (PS) |
| PLL Count | 4 |
| Process Technology | 60 nm low-power |
| حالة RoHS | Compliant |
| Lead-Free / Halogen-Free | Yes (per Cyclone 10 LP product family) |
تكوين أطراف 10CL025YE144C8G
| دبوس 1 | I/O — General purpose user I/O (bank 1) |
| دبوس 2 | I/O — General purpose user I/O (bank 1) |
| دبوس 3 | VCCIO1 — I/O bank 1 supply voltage |
| دبوس 4 | I/O — General purpose user I/O (bank 1) |
| دبوس 5 | I/O — General purpose user I/O (bank 1) |
| دبوس 6 | I/O — General purpose user I/O (bank 1) |
| دبوس 7 | I/O — General purpose user I/O (bank 1) |
| دبوس 8 | I/O — General purpose user I/O (bank 1) |
| دبوس 9 | I/O — General purpose user I/O (bank 2) |
| دبوس 10 | VCCIO2 — I/O bank 2 supply voltage |
| دبوس 11 | I/O — General purpose user I/O (bank 2) |
| دبوس 12 | GND — Ground |
| دبوس 13 | I/O — General purpose user I/O (bank 2) |
| دبوس 14 | I/O — General purpose user I/O (bank 2) |
| دبوس 15 | VCCINT — Core supply voltage (1.0-1.2 V) |
| دبوس 16 | GND — Ground |
| دبوس 17 | I/O — General purpose user I/O (bank 3) |
| دبوس 18 | I/O — General purpose user I/O (bank 3) |
| دبوس 19 | VCCIO3 — I/O bank 3 supply voltage |
| دبوس 20 | I/O — General purpose user I/O (bank 3) |
| دبوس 21 | I/O — General purpose user I/O (bank 3) |
| دبوس 22 | I/O — General purpose user I/O (bank 3) |
| دبوس 23 | I/O — General purpose user I/O (bank 4) |
| دبوس 24 | VCCIO4 — I/O bank 4 supply voltage |
| دبوس 25 | I/O — General purpose user I/O (bank 4) |
| دبوس 26 | I/O — General purpose user I/O (bank 4) |
| دبوس 27 | GND — Ground |
| دبوس 28 | I/O — General purpose user I/O (bank 4) |
| دبوس 29 | I/O — General purpose user I/O (bank 5) |
| دبوس 30 | I/O — General purpose user I/O (bank 5) |
| دبوس 31 | VCCIO5 — I/O bank 5 supply voltage |
| دبوس 32 | I/O — General purpose user I/O (bank 5) |
| دبوس 33 | I/O — General purpose user I/O (bank 5) |
| دبوس 34 | VCCINT — Core supply voltage (1.0-1.2 V) |
| دبوس 35 | GND — Ground |
| دبوس 36 | I/O — General purpose user I/O (bank 5) |
| دبوس 37 | I/O — General purpose user I/O (bank 6) |
| دبوس 38 | VCCIO6 — I/O bank 6 supply voltage |
| دبوس 39 | I/O — General purpose user I/O (bank 6) |
| دبوس 40 | I/O — General purpose user I/O (bank 6) |
| دبوس 41 | I/O — General purpose user I/O (bank 6) |
| دبوس 42 | I/O — General purpose user I/O (bank 7) |
| دبوس 43 | VCCIO7 — I/O bank 7 supply voltage |
| دبوس 44 | I/O — General purpose user I/O (bank 7) |
| دبوس 45 | I/O — General purpose user I/O (bank 7) |
| دبوس 46 | GND — Ground |
| دبوس 47 | I/O — General purpose user I/O (bank 7) |
| دبوس 48 | I/O — General purpose user I/O (bank 7) |
| دبوس 49 | I/O — General purpose user I/O (bank 8) |
| دبوس 50 | VCCIO8 — I/O bank 8 supply voltage |
| دبوس 51 | I/O — General purpose user I/O (bank 8) |
| دبوس 52 | I/O — General purpose user I/O (bank 8) |
| دبوس 53 | I/O — General purpose user I/O (bank 8) |
| دبوس 54 | VCCINT — Core supply voltage (1.0-1.2 V) |
| دبوس 55 | GND — Ground |
| دبوس 56 | I/O — General purpose user I/O (bank 8) |
| دبوس 57 | I/O — General purpose user I/O (bank 9) |
| دبوس 58 | VCCIO9 — I/O bank 9 supply voltage |
| دبوس 59 | I/O — General purpose user I/O (bank 9) |
| دبوس 60 | I/O — General purpose user I/O (bank 9) |
| دبوس 61 | I/O — General purpose user I/O (bank 9) |
| دبوس 62 | I/O — General purpose user I/O (bank 10) |
| دبوس 63 | VCCIO10 — I/O bank 10 supply voltage |
| دبوس 64 | I/O — General purpose user I/O (bank 10) |
| دبوس 65 | I/O — General purpose user I/O (bank 10) |
| دبوس 66 | GND — Ground |
| دبوس 67 | I/O — General purpose user I/O (bank 10) |
| دبوس 68 | I/O — General purpose user I/O (bank 10) |
| دبوس 69 | I/O — General purpose user I/O (bank 11) |
| دبوس 70 | VCCIO11 — I/O bank 11 supply voltage |
| دبوس 71 | I/O — General purpose user I/O (bank 11) |
| دبوس 72 | I/O — General purpose user I/O (bank 11) |
| دبوس 73 | I/O — General purpose user I/O (bank 11) |
| دبوس 74 | VCCINT — Core supply voltage (1.0-1.2 V) |
| دبوس 75 | GND — Ground |
| دبوس 76 | I/O — General purpose user I/O (bank 11) |
| دبوس 77 | I/O — General purpose user I/O (bank 12) |
| دبوس 78 | VCCIO12 — I/O bank 12 supply voltage |
| دبوس 79 | I/O — General purpose user I/O (bank 12) |
| دبوس 80 | I/O — General purpose user I/O (bank 12) |
| دبوس 81 | I/O — General purpose user I/O (bank 12) |
| دبوس 82 | I/O — General purpose user I/O (bank 13) |
| دبوس 83 | VCCIO13 — I/O bank 13 supply voltage |
| دبوس 84 | I/O — General purpose user I/O (bank 13) |
| دبوس 85 | I/O — General purpose user I/O (bank 13) |
| دبوس 86 | GND — Ground |
| دبوس 87 | I/O — General purpose user I/O (bank 13) |
| دبوس 88 | I/O — General purpose user I/O (bank 13) |
| دبوس 89 | I/O — General purpose user I/O (bank 14) |
| دبوس 90 | VCCIO14 — I/O bank 14 supply voltage |
| دبوس 91 | I/O — General purpose user I/O (bank 14) |
| دبوس 92 | I/O — General purpose user I/O (bank 14) |
| دبوس 93 | I/O — General purpose user I/O (bank 14) |
| دبوس 94 | VCCINT — Core supply voltage (1.0-1.2 V) |
| دبوس 95 | GND — Ground |
| دبوس 96 | I/O — General purpose user I/O (bank 14) |
| دبوس 97 | I/O — General purpose user I/O (bank 15) |
| دبوس 98 | VCCIO15 — I/O bank 15 supply voltage |
| دبوس 99 | I/O — General purpose user I/O (bank 15) |
| دبوس 100 | I/O — General purpose user I/O (bank 15) |
| دبوس 101 | I/O — General purpose user I/O (bank 15) |
| دبوس 102 | I/O — General purpose user I/O (bank 16) |
| دبوس 103 | VCCIO16 — I/O bank 16 supply voltage |
| دبوس 104 | I/O — General purpose user I/O (bank 16) |
| دبوس 105 | I/O — General purpose user I/O (bank 16) |
| دبوس 106 | GND — Ground |
| دبوس 107 | I/O — General purpose user I/O (bank 16) |
| دبوس 108 | I/O — General purpose user I/O (bank 16) |
| دبوس 109 | I/O — General purpose user I/O (bank 1, reverse side) |
| دبوس 110 | VCCIO1 — I/O bank 1 supply voltage (reverse side) |
| دبوس 111 | I/O — General purpose user I/O (bank 1) |
| دبوس 112 | I/O — General purpose user I/O (bank 1) |
| دبوس 113 | I/O — General purpose user I/O (bank 1) |
| دبوس 114 | VCCINT — Core supply voltage (1.0-1.2 V) |
| دبوس 115 | GND — Ground |
| دبوس 116 | I/O — General purpose user I/O (bank 1) |
| دبوس 117 | TCK — JTAG test clock |
| دبوس 118 | TMS — JTAG test mode select |
| دبوس 119 | TDI — JTAG test data in |
| دبوس 120 | TDO — JTAG test data out |
| دبوس 121 | nSTATUS — Configuration status (active low) |
| دبوس 122 | nCONFIG — Configuration start (active low) |
| دبوس 123 | CONF_DONE — Configuration done (open drain) |
| دبوس 124 | MSEL0 — Configuration mode select 0 |
| دبوس 125 | MSEL1 — Configuration mode select 1 |
| دبوس 126 | MSEL2 — Configuration mode select 2 |
| دبوس 127 | DCLK — Configuration clock input |
| دبوس 128 | DATA0 — Configuration data input |
| دبوس 129 | VCCA — PLL analog supply (1.2 V) |
| دبوس 130 | GNDA — PLL analog ground |
| دبوس 131 | VCCPD — Configuration supply (3.3 V) |
| دبوس 132 | I/O — General purpose user I/O (bank 2) |
| دبوس 133 | I/O — General purpose user I/O (bank 2) |
| دبوس 134 | GND — Ground |
| دبوس 135 | I/O — General purpose user I/O (bank 2) |
| دبوس 136 | I/O — General purpose user I/O (bank 2) |
| دبوس 137 | I/O — General purpose user I/O (bank 3) |
| دبوس 138 | VCCIO3 — I/O bank 3 supply voltage |
| دبوس 139 | I/O — General purpose user I/O (bank 3) |
| دبوس 140 | I/O — General purpose user I/O (bank 3) |
| دبوس 141 | I/O — General purpose user I/O (bank 3) |
| دبوس 142 | VCCINT — Core supply voltage (1.0-1.2 V) |
| دبوس 143 | GND — Ground |
| دبوس 144 | I/O — General purpose user I/O (bank 3) |
التطبيقات النموذجية
10CL025YE144C8G مناسب لـ 6 التطبيقs: Industrial I/O Expansion and Protocol Bridging, Motor Control and Variable-Frequency Drives, Video Bridging and Display Processing, Low-Power IoT Edge Gateways, Portable Test and Measurement Instrumentation, Automotive Infotainment Auxiliary Controllers.
Industrial I/O Expansion and Protocol Bridging
The 10CL025YE144C8G is well-suited for industrial I/O expansion cards that need to bridge between legacy fieldbus protocols (RS-485, RS-232, Modbus RTU) and modern Ethernet/IP or PROFINET. Its 24,624 logic elements provide ample headroom for soft-core CPUs (such as the Nios II) plus custom protocol state machines, while the 76 user I/O pins accommodate multiple isolated serial channels and parallel GPIO. The C8 speed grade meets typical 12-100 MHz industrial baud requirements with timing margin. Designers should use the E144 exposed pad for thermal relief and follow Intel's industrial temperature layout guidelines.
موصى به
Motor Control and Variable-Frequency Drives
In variable-frequency motor drives, the 10CL025YE144C8G handles field-oriented control (FOC) loops, PWM generation, and current-sampling coordination. The 66 dedicated 18x18 multipliers accelerate the Park/Clarke transforms and PI controllers used in vector control, while the 4 PLLs provide independent clocks for PWM, ADC, and encoder interfaces. With 1.2V core operation and the low-power 60 nm process, the device fits comfortably inside sealed inverter enclosures with no active cooling. The exposed pad on the E144 package is essential for dissipating the ~1-2 W typical power budget.
موصى به
Video Bridging and Display Processing
The 10CL025YE144C8G can be used in video format converters, scalers, and LVDS-to-MIPI bridges for industrial displays and machine vision interfaces. Its M9K memory blocks (608 Kbit total) buffer line-scan or area-scan image data, and the multiplier array supports simple scaling and color-space conversion algorithms. The 76 I/O pins accommodate LVDS pairs and parallel RGB interfaces at moderate resolutions. Designers should use Quartus Prime's Video and Image Processing Suite IP for accelerated development and observe strict length-matched routing for LVDS channels.
موصى به
Low-Power IoT Edge Gateways
For battery- or solar-powered edge gateways aggregating sensor data before forwarding to the cloud, the 10CL025YE144C8G offers a compelling combination of low static power (~70-100 mW idle) and sufficient logic to run a soft-core plus cryptographic accelerators. The C8 speed grade supports typical LoRaWAN, BLE, and sub-GHz radio host-controller duties. With 1.0-1.2V core operation, the device remains within the budget of a small solar-harvested supply. Designers should leverage Quartus' power-aware synthesis and clock-gating to extend battery life further.
موصى به
Portable Test and Measurement Instrumentation
Portable oscilloscopes, data loggers, and bench-top test instruments benefit from the 10CL025YE144C8G's high multiplier count for DSP-based filtering and FFT operations, plus its M9K memory for sample buffering. The exposed-pad E144 package allows the device to fit inside handheld enclosures without active cooling. Designers can implement custom trigger logic, decimating filters, and on-screen display (OSD) generation entirely in fabric. Quartus' DSP Builder toolchain accelerates Simulink-based DSP development for these applications.
موصى به
Automotive Infotainment Auxiliary Controllers
Although not AEC-Q100 qualified itself, the 10CL025YE144C8G is used in non-safety automotive applications such as head-unit auxiliary controllers, dashboard illumination drivers, and HMI expansion. Its 24K logic elements support multiple LIN/CAN soft controllers and LED-matrix drivers simultaneously. The 144-EQFP footprint is a common form factor for behind-dash modules. Designers targeting safety-critical automotive functions should select the AEC-Q100-qualified Cyclone 10 LP -Q variant or move to a different family.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ 10CL025YE144C8G — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | 10CL025YE144C6G | 10CL025YE144A7G | 10CL025YE144I7G | 10CL016YE144C8G | 10CL010YE144C8G | 10CL006YE144C8G |
|---|---|---|---|---|---|---|---|
| Package | 144-EQFP (E144, 22x22 mm) | 144-EQFP (E144) - same | 144-EQFP (E144) - same | 144-EQFP (E144) - same | 144-EQFP (E144) - same | 144-EQFP (E144) - same | 144-EQFP (E144) - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 24,624 | 24,624 | 24,624 | 24,624 | 15,408 | 10,320 | 6,272 |
| Embedded Memory (bit) | 608,256 | 608,256 | 608,256 | 608,256 | 504,000 | 414,000 | 270,000 |
| 18x18 Multipliers | 66 | 66 | 66 | 66 | 56 | 46 | 30 |
| Speed Grade | C8 | C6 (slower) | A7 (faster) | I7 (industrial) | C8 | C8 | C8 |
| Operating Temperature | 0C to +85C (commercial) | 0C to +85C | 0C to +85C | -40C to +100C (industrial) | 0C to +85C | 0C to +85C | 0C to +85C |
أبرز الفروقات
- Balanced logic density with low static power (مقابلCyclone IV EP4CE25E144)
- C8 speed grade at lower cost than A7 variant (مقابل10CL025YE144A7G)
- Commercial temp at minimum cost in the 25K-LE class (مقابل10CL025YE144I7G)
- Expandable logic capacity on the same PCB (مقابل10CL016YE144C8G)
ملاحظات التصميم
The 10CL025YE144C8G requires multiple supply rails: VCCINT (1.0-1.2 V core), VCCIOx per bank (1.2-3.3 V), VCCA (1.2 V PLL analog), and VCCPD (3.3 V configuration). Intel recommends a specific power-up sequence (VCCINT before VCCPD before VCCIO) to prevent latch-up; use a supervisor IC such as the ADM1184 to enforce this. Place 100 nF decoupling capacitors within 5 mm of every VCCINT and VCCIO pin, with bulk 10-47 uF tantalum or polymer capacitors on each rail. The exposed pad (EP) must be soldered to a continuous ground plane to minimize thermal resistance.
Estimated: at 25% logic utilization, 50 MHz typical toggle rate, and 1.2 V VCCINT, the 10CL025YE144C8G dissipates approximately 1.0-1.5 W. With the E144 package theta_JA of approximately 28 C/W on a 4-layer JEDEC test board, the junction-to-ambient temperature rise is roughly 28-42 C. For commercial-grade (0C to +85C) operation, this leaves a margin of about 40-55 C above the maximum 85C ambient. In a sealed enclosure with limited airflow, derate by adding thermal vias under the exposed pad and enlarging the top-side copper pour to at least 1 square inch.
The 144-EQFP package has a 0.5 mm pitch and a 22x22 mm body. Route signals on inner layers to break out from the dense perimeter pins; allow at least 4 routing layers for a clean break-out. Differential pairs (LVDS) must be length-matched to within 150 mil; high-speed memory interfaces (DDR3) require strict impedance control of 50 ohm single-ended and 100 ohm differential. Quartus Prime's Pin Planner and the E144 board-level symbol library should be used to validate the schematic before tape-out.
Do not leave the nCONFIG pin floating during normal operation - it must be pulled high to VCCPD through a 10 kohm resistor, or the device will not enter user mode after configuration. Similarly, MSEL[2:0] must be tied to a valid configuration mode (e.g., 000 = AS standard, 001 = AS fast, 010 = PS, 100 = JTAG-only) and not left floating. The nSTATUS and CONF_DONE pins require external 10 kohm pull-ups to VCCPD. Refer to the Cyclone 10 LP Device Family Pin Connection Guidelines for the complete checklist.
Place the 50 MHz or 100 MHz configuration clock source (typically a dedicated oscillator) within 25 mm of the DCLK pin and shield the trace with ground vias. For Active Serial (AS) configuration using an EPCS or EPCQ flash, route the AS_DO, AS_CS, and DCLK traces as a matched-length group with no stubs. Keep JTAG signals (TCK, TMS, TDI, TDO) away from switching power and high-frequency I/O to prevent programming failures.
معلومات الامتثال
RoHS and REACH compliant per Cyclone 10 LP product family datasheet. Not AEC-Q100 qualified - select AEC-Q100 variant for automotive safety-critical applications.
