EPF8452ATC100-3N - FLEX 8000 FPGA, 4K Gates, 100-TQFP | Intel EPF8452ATC100-3N oleh Intel - komponen elektronik
Intel

EPF8452ATC100-3N - FLEX 8000 FPGA, 4K Gates, 100-TQFP | Intel

MPN: EPF8452ATC100-3N ✗ Akhir Hidup
5 V (4.75 V to 5.25 V) Vdss 100-pin TQFP Package 125 MHz Speed
Ajukan Diskon
MOQ: 1 |
Lihat Datasheet (PDF) Lihat Alternatif

EPF8452ATC100-3N Ringkasan

The Intel (formerly Altera) EPF8452ATC100-3N is a member of the FLEX 8000 family of Field Programmable Gate Arrays (FPGAs), delivering approximately 4,000 usable gates and 336 logic cells in a 100-pin TQFP package. It is built on a 0.42 µm CMOS SRAM process, operates from a 5 V supply (4.75 V to 5.25 V), and is offered in the commercial 0 °C to 70 °C temperature grade with 78 user I/Os available for external interfacing.

An FPGA is a programmable logic device that combines a large array of configurable logic blocks (LABs), programmable interconnect, and configurable I/O elements on a single die. In the FLEX 8000 hierarchy, the EPF8452ATC100-3N belongs to the FLEX 8000 family -> programmable logic device -> semiconductor IC. FPGAs sit above traditional PLDs and CPLDs in integration density and are used when design requirements exceed the capacity of simpler glue-logic or PAL/GAL devices.

Key features include 42 Logic Array Blocks (LABs), 336 logic elements, 78 user I/Os, in-circuit reconfigurability through SRAM configuration cells, and a system-level maximum internal frequency of approximately 125 MHz. Configuration is performed at power-up via industry-standard parallel EPROM, Altera serial configuration devices (EPC1, EPC1064, EPC1213, EPC1441), or a system controller, making the part suitable for prototype and production flows alike.

The fast continuous interconnect of FLEX 8000 uses a row-and-column routing structure with continuous FastTrack channels that drive signals predictably between LABs. This architecture gives predictable timing and short propagation delays across typical designs. EPF8452ATC100-3N uses 5 V CMOS I/O with PCI-compliant drive capability, supporting bus interfaces that were common in the late 1990s and early 2000s.

Typical applications include PCI bus interfaces, peripheral glue-logic consolidation, industrial control boards, telecommunications line-card interface logic, and legacy replacement of discrete 74-series logic. The 100-TQFP footprint is convenient for prototype boards and through-hole-compatible adapters.

When designing with this part, note that configuration data must be reloaded at every power-up because the FLEX 8000 uses SRAM configuration cells; pair it with a configuration EPROM or Altera EPC-series device. The 100-TQFP package dissipates moderate power; review the datasheet thermal section for high-utilization designs.

This page consolidates distributor pricing, same-package drop-in alternatives within the FLEX 8000 family, and practical design notes not found in the standalone datasheet PDF.

Alternatif penggantian untuk EPF8452ATC100-3N — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian EPF8452ATC100-3N (sama faktor bentuk dan footprint) — berbeda di dalam Configuration Method, Package, Usable Gates, Operating Temperature, Process Technology.

Intel
Package: 100-pin TQFP (14x14 mm)
Operating Temperature: 0C to 85C (TJ)
Bandingkan dengan EPF8452ATC100-3N →
Intel
Configuration Method: SRAM, EPC1/EPC1064/EPC1213/EPC1441, microprocessor
Package: 100-pin TQFP (100-TQFP)
Usable Gates: 2,500
Bandingkan dengan EPF8452ATC100-3N →
Intel
Configuration Method: Serial/parallel EPROM, EPC1, EPC1213, EPC1064, EPC1441, or system controller
Package: 100-pin TQFP (14x14 mm)
Usable Gates: 4,000
Bandingkan dengan EPF8452ATC100-3N →
Intel
Configuration Method: SRAM, loaded from EPC1 / EPC1213 / EPC1064 / EPC1441 or external EPROM/microcontroller
Usable Gates: approximately 4,000 (up to 16,000 across family)
Operating Temperature: 0 C to 70 C (Commercial)
Bandingkan dengan EPF8452ATC100-3N →
Altera
Configuration Method: CMOS SRAM, configured via parallel EPROM or Altera EPC1/EPC1064/EPC1213/EPC1441 serial device
Package: 100-TQFP
Process Technology: CMOS
Bandingkan dengan EPF8452ATC100-3N →
Intel
Configuration Method: SRAM, external EPROM or EPC-series device
Package: 144-pin TQFP / LFQFP (20 x 20 mm)
Usable Gates: 8,000 (typical)
Bandingkan dengan EPF8452ATC100-3N →

EPF8452ATC100-3

✅ Drop-In
Intel
📦 100-TQFP
FLEX 8000 · 4,000 · 336 · 42 · 452 · 78 · 4.75 V to 5.25 V (5 V nominal) · 125 MHz

Kontak untuk harga

Lihat Datasheet →

EPF8452ATC100-4N

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Altera
📦 100-TQFP
FLEX 8000 · FPGA - Field Programmable Gate Array · 336 LEs · 42 LABs · 68 · 100-TQFP · LFQFP

Kontak untuk harga

Lihat Datasheet →

EPF8282ATC100-3

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Intel
📦 100-TQFP
FLEX 8000 · 208 · 2,500 · 12,000 · 78 · 26 · 6 · 12 Kbits

Kontak untuk harga

Lihat Datasheet →

EPF6016ATC100-3N

✅ Drop-In
Intel
📦 100-TQFP
FLEX 6000 · SRAM-based FPGA · 16,000 · 1,320 · 132 · 81 · 142.86 MHz (max) · 0.42 um CMOS

Kontak untuk harga

Lihat Datasheet →

EPF8452ATC100-3N Rating Maksimal & Karakteristik Listrik

Family FLEX 8000
Logic Elements / Cells 336
Number of LABs/CLBs 42
Usable Gates approximately 4,000
User I/Os 78
Tegangan Pemuat 5 V (4.75 V to 5.25 V)
Process Technology 0.42 µm CMOS SRAM
Suhu Kerja 0 °C to 70 °C (commercial)
Maximum Internal Frequency 125 MHz
Paket 100-pin TQFP
Tipe Mounting Surface Mount
Configuration Method SRAM, in-circuit reconfigurable (EPC1/EPC1064/EPC1213/EPC1441 or parallel EPROM)
I/O Standard 5 V CMOS, PCI-compliant drive
Logic Family CMOS

Konfigurasi Pin EPF8452ATC100-3N

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
Pin produk 1 I/O — User I/O (bank-dependent function per datasheet)
Pin produk 10 I/O — User I/O
Pin produk 11 I/O — User I/O
Pin produk 12 I/O — User I/O
Pin produk 13 I/O — User I/O
Pin produk 14 I/O — User I/O
Pin produk 15 GND — Ground
Pin produk 16 I/O — User I/O
Pin produk 17 I/O — User I/O
Pin produk 18 I/O — User I/O
Pin produk 19 I/O — User I/O
Pin produk 2 I/O — User I/O
Pin produk 20 I/O — User I/O
Pin produk 21 VCC — 5 V supply
Pin produk 22 I/O — User I/O
Pin produk 23 I/O — User I/O
Pin produk 24 I/O — User I/O
Pin produk 25 I/O — User I/O
Pin produk 26 I/O — User I/O
Pin produk 27 I/O — User I/O
Pin produk 28 GND — Ground
Pin produk 29 I/O — User I/O
Pin produk 3 I/O — User I/O
Pin produk 30 I/O — User I/O
Pin produk 31 I/O — User I/O
Pin produk 32 I/O — User I/O
Pin produk 33 I/O — User I/O
Pin produk 34 VCC — 5 V supply
Pin produk 35 I/O — User I/O
Pin produk 36 I/O — User I/O
Pin produk 37 I/O — User I/O
Pin produk 38 I/O — User I/O
Pin produk 39 I/O — User I/O
Pin produk 4 I/O — User I/O
Pin produk 40 GND — Ground
Pin produk 41 nCONFIG — Configuration control (active-low)
Pin produk 42 nSTATUS — Configuration status (active-low)
Pin produk 43 CONF_DONE — Configuration done indicator
Pin produk 44 DCLK — Configuration clock input
Pin produk 45 DATA0 — Configuration data input
Pin produk 46 MSEL1 — Configuration mode select 1
Pin produk 47 MSEL0 — Configuration mode select 0
Pin produk 48 I/O — User I/O
Pin produk 49 I/O — User I/O
Pin produk 5 I/O — User I/O
Pin produk 50 VCC — 5 V supply
Pin produk 51 I/O — User I/O
Pin produk 52 I/O — User I/O
Pin produk 53 I/O — User I/O
Pin produk 54 I/O — User I/O
Pin produk 55 I/O — User I/O
Pin produk 56 I/O — User I/O
Pin produk 57 GND — Ground
Pin produk 58 I/O — User I/O
Pin produk 59 I/O — User I/O
Pin produk 6 I/O — User I/O
Pin produk 60 I/O — User I/O
Pin produk 61 I/O — User I/O
Pin produk 62 I/O — User I/O
Pin produk 63 I/O — User I/O
Pin produk 64 I/O — User I/O
Pin produk 65 VCC — 5 V supply
Pin produk 66 I/O — User I/O
Pin produk 67 I/O — User I/O
Pin produk 68 I/O — User I/O
Pin produk 69 I/O — User I/O
Pin produk 7 I/O — User I/O
Pin produk 70 GND — Ground
Pin produk 71 I/O — User I/O
Pin produk 72 I/O — User I/O
Pin produk 73 I/O — User I/O
Pin produk 74 I/O — User I/O
Pin produk 75 I/O — User I/O
Pin produk 76 I/O — User I/O
Pin produk 77 I/O — User I/O
Pin produk 78 VCC — 5 V supply
Pin produk 79 TDI — JTAG test data input
Pin produk 8 I/O — User I/O
Pin produk 80 TMS — JTAG test mode select
Pin produk 81 TCK — JTAG test clock
Pin produk 82 TDO — JTAG test data output
Pin produk 83 I/O — User I/O
Pin produk 84 I/O — User I/O
Pin produk 85 I/O — User I/O
Pin produk 86 GND — Ground
Pin produk 87 I/O — User I/O
Pin produk 88 I/O — User I/O
Pin produk 89 I/O — User I/O
Pin produk 9 I/O — User I/O
Pin produk 90 I/O — User I/O
Pin produk 91 I/O — User I/O
Pin produk 92 VCC — 5 V supply
Pin produk 93 I/O — User I/O
Pin produk 94 I/O — User I/O
Pin produk 95 I/O — User I/O
Pin produk 96 I/O — User I/O
Pin produk 97 I/O — User I/O
Pin produk 98 GND — Ground
Pin produk 99 I/O — User I/O
Pin produk 100 I/O — User I/O

Aplikasi Umum

EPF8452ATC100-3N cocok untuk 6 aplikasis: PCI Bus Interface Bridge, Industrial Control Glue Logic Consolidation, Telecommunications Line-Card Interface Logic, Legacy 74-Series Logic Replacement, Prototyping Platform for Custom State Machines, Test and Measurement Front-End Logic.

🌐

PCI Bus Interface Bridge

The EPF8452ATC100-3N's 5 V PCI-compliant I/O drive strength and 78 user I/Os make it well suited for legacy PCI bus interface bridging between a host controller and peripheral glue logic. With 4,000 usable gates and 42 LABs, it can implement target-state machines, address decoding, interrupt steering, and byte-enable logic in a single 100-TQFP device. The 125 MHz internal frequency comfortably supports 33 MHz PCI timing budgets. Designers place the FPGA between the PCI connector and an application-specific ASIC or microcontroller, using Quartus II for synthesis and timing closure. Its 5 V CMOS I/O eliminates the need for level shifters on the PCI bus side, simplifying PCB routing. Configuration via an EPC1 or EPC1441 serial PROM allows autonomous power-up without host intervention.

Direkomendasikan

EPC1 (Altera serial configuration PROM for FLEX 8000) EPC1441 (Higher-density serial configuration PROM)
🏭

Industrial Control Glue Logic Consolidation

In industrial control boards, the EPF8452ATC100-3N replaces dozens of 74-series discrete logic ICs by integrating address decoding, bus arbitration, watchdog timers, and I/O expansion into a single 100-TQFP device. The 78 user I/Os support direct connection to many sensors, optocouplers, and relay drivers, reducing board area and BOM cost. Industrial systems benefit from the part's 0 °C to 70 °C commercial temperature range when housed in controlled enclosures. The in-circuit reconfigurability of FLEX 8000 allows field firmware updates via JTAG, useful for late-stage protocol changes without board rework. Engineers should add a small EEPROM-style configuration device and ensure clean 5 V supply decoupling for reliable operation in electrically noisy industrial environments.

Direkomendasikan

EPC1064 (Compact serial configuration PROM for cost-sensitive industrial designs)
📡

Telecommunications Line-Card Interface Logic

Telecommunications line cards historically rely on FLEX 8000 devices such as the EPF8452ATC100-3N to implement TDM bus formatting, framer/mapper glue, clock-domain crossing, and hardware-protocol adaptation between line-interface units and switch-fabric ASICs. With 4,000 usable gates, the device comfortably fits state machines for HDB3/AMI encoding, slip-buffer control, and alarm-collection registers. Its 5 V tolerant CMOS I/O connects directly to legacy telecom backplanes without external level shifters. The 100-TQFP footprint supports standard SMT assembly lines, while the 78 I/Os are sufficient to drive multi-protocol serial buses. Designers should validate timing closure with Quartus II and use a configuration EPROM sized for the compiled bitstream.

Direkomendasikan

EPC1213 (Mid-density serial configuration PROM)
🔧

Legacy 74-Series Logic Replacement

The EPF8452ATC100-3N is a strong candidate when modernizing legacy boards that contain many discrete 74LS/74HC/74F TTL packages. The 4,000 usable gates and 78 user I/Os can absorb the equivalent of 20-40 small-scale and medium-scale ICs in a single chip, dramatically reducing PCB complexity and assembly cost. Designers capture the original schematic logic into Quartus II using either VHDL, Verilog, or schematic-entry netlists, then target the FLEX 8000 device directly. The 100-TQFP pinout fits standard 1.6 mm board stack-ups, and the 5 V I/O is drop-in compatible with the TTL rails it replaces. In-circuit reconfigurability allows incremental logic fixes without board spin.

Direkomendasikan

EPF8282ATC100-3 · Intel
🧩

Prototyping Platform for Custom State Machines

Engineering teams use the EPF8452ATC100-3N as a fast-prototyping platform for custom state machines, FIFO controllers, and protocol converters in the 100-TQFP form factor. The 125 MHz internal frequency and Quartus II synthesis flow enable iterative design cycles measured in hours rather than weeks. The 78 user I/Os are accessible on standard 0.5 mm-pitch TQFP land patterns, simplifying breakout-board integration. Because FLEX 8000 supports SRAM-based in-circuit reconfigurability, a single board can host multiple design revisions simply by reprogramming the configuration EPROM. This makes it ideal for FPGA-meets-ASIC proof-of-concept work where designers need a quick hardware target before committing to a masked gate array.

Direkomendasikan

EPF81500ARC240-3 · Intel
🔬

Test and Measurement Front-End Logic

Test and measurement instruments often use FLEX 8000 devices such as the EPF8452ATC100-3N for front-end channel switching, trigger logic, timing generators, and counter pre-scalers. The 4,000 usable gates are sufficient for 8-to-16 channel mux trees, while 78 I/Os interface directly to ADC/DAC and comparator front-ends. The 5 V supply rails simplify integration with op-amps and analog multiplexers that still run on ±5 V or single 5 V rails. PCI-compliant drive strength also supports insertion into PXI/cPCI measurement chassis via a bridge interface. Configuration is straightforward with an EPC1 or EPC1064, and the 100-TQFP package handles reflow assembly on standard 1.6 mm FR-4 boards.

Direkomendasikan

EPC1064 (Compact configuration PROM for instrument front-ends)

Ringkasan Produk Direkomendasikan

EPC1 Altera serial configuration PROM for FLEX 8000 Digunakan di dalam: PCI Bus Interface Bridge EPC1441 Higher-density serial configuration PROM Digunakan di dalam: PCI Bus Interface Bridge EPC1064 Compact serial configuration PROM for cost-sensitive industrial designs Digunakan di dalam: Industrial Control Glue Logic Consolidation, Test and Measurement Front-End Logic EPC1213 Mid-density serial configuration PROM Digunakan di dalam: Telecommunications Line-Card Interface Logic EPF8282ATC100-3 Intel Digunakan di dalam: Legacy 74-Series Logic Replacement EPF81500ARC240-3 Intel Digunakan di dalam: Prototyping Platform for Custom State Machines
What is the usable gate count of EPF8452ATC100-3N?
The EPF8452ATC100-3N is a FLEX 8000 family FPGA with approximately 4,000 usable gates and 336 logic cells. According to Altera/Intel FLEX 8000 family documentation, the device contains 42 Logic Array Blocks (LABs) and supports up to 78 user I/Os on the 100-pin TQFP package. This makes it a mid-density entry in the FLEX 8000 line, well-suited for interface bridging and glue-logic consolidation.
What supply voltage does EPF8452ATC100-3N require?
The EPF8452ATC100-3N operates from a single 5 V supply with a tolerance of 4.75 V to 5.25 V per the manufacturer datasheet. It uses 5 V CMOS I/O with PCI-compliant drive strength. Designers should provide a well-decoupled supply rail; place 0.1 µF and 10 µF capacitors close to the VCC pins to suppress switching noise during configuration and normal operation.
What is the difference between EPF8452ATC100-3N and EPF8452ATC100-3?
The EPF8452ATC100-3N and the EPF8452ATC100-3 differ in operating temperature grade. The EPF8452ATC100-3N is the commercial-temperature version rated 0 °C to 70 °C, while the EPF8452ATC100-3 is typically the lead-free or Pb-free variant. Both share the same die, 100-TQFP package, pinout, and 4,000 usable-gate density, making them functionally drop-in compatible in most designs.
What configuration device should I use with EPF8452ATC100-3N?
The EPF8452ATC100-3N requires an external configuration device because its logic is stored in volatile SRAM. According to the Altera datasheet, supported options include the EPC1, EPC1064, EPC1213, and EPC1441 serial configuration devices, plus industry-standard parallel EPROMs. Altera/Intel offers these configuration devices specifically for the FLEX 8000 family, ensuring correct data format and timing during power-up.
Where can I buy EPF8452ATC100-3N today?
As of 2026-09-12, EPF8452ATC100-3N is listed as obsolete or last-time-buy by Altera/Intel but is still available through authorized distributors such as DigiKey and Mouser, plus secondary-market brokers. Pricing for the 100-TQFP commercial version is approximately $28.50 at qty 1. Lead time varies; quote-on-request status is common for end-of-life FLEX 8000 devices, so check live inventory before committing to a new design.
What is the lead time for EPF8452ATC100-3N orders?
Lead time for EPF8452ATC100-3N as of 2026-09-12 ranges from same-day to several weeks, depending on distributor stock and remaining manufacturer inventory. Because the FLEX 8000 family is in its end-of-life phase, large orders should be confirmed with the seller directly. Customers designing new production boards should secure full-quantity buy-ahead inventory or qualify an alternative FPGA family (Cyclone, MAX II) before depletion.
Is EPF8452ATC100-3N still in production or obsolete?
The EPF8452ATC100-3N is classified as obsolete by Altera/Intel as of 2026-09-12. The FLEX 8000 family has been superseded by Cyclone and later MAX device families. Active stock exists only at distributors and brokers; new factory orders are generally not accepted. Engineers should treat this part as a long-term-availability risk for new designs and consider a modern drop-in replacement path.
What is the maximum operating frequency of EPF8452ATC100-3N?
The maximum internal frequency of the EPF8452ATC100-3N is approximately 125 MHz, per the Altera FLEX 8000 family datasheet. Achievable system frequency depends on routing path length, number of LABs traversed, and I/O register usage. The FastTrack continuous interconnect provides predictable timing that can be analyzed with the Quartus II design tool during compile-time timing closure.
Can EPF8452ATC100-3N replace EPF8452ATC100-4N directly?
Yes, the EPF8452ATC100-3N is a drop-in replacement for the EPF8452ATC100-4N on the same 100-TQFP footprint, differing primarily in speed grade. The -3N suffix denotes a faster speed grade than -4N, so existing 100-TQFP designs that use the -4N device can mount the -3N part without PCB changes. Designers should verify timing margins are still acceptable when downgrading from -3N to -4N, not when upgrading.
Which other FLEX 8000 devices share the 100-TQFP package?
Other FLEX 8000 family members offered in 100-TQFP include the EPF8282ATC100 variants (approximately 2,500 gates, 82 user I/Os) and the EPF6016ATC100-3N (approximately 16,000 usable gates, 81 user I/Os). Both share the 100-TQFP footprint with the EPF8452ATC100-3N, allowing a single PCB layout to be reused across density upgrades and speed-grade variants within the same family.
Where do I download the EPF8452ATC100-3N datasheet PDF?
The official Altera FLEX 8000 datasheet covering the EPF8452ATC100-3N is hosted by Altera/Intel and is mirrored at alterasemi.com. Search for the FLEX 8000 datasheet (covers EPF8282, EPF8452, EPF8636, EPF8820, EPF81188, EPF81500) at https://www.alterasemi.com/datasheet/alterasemi/EPF8452ATC100-3.pdf. Always verify the device-grade suffix matches your order when reviewing the electrical characteristics section.
What is the pinout of the EPF8452ATC100-3N in 100-TQFP?
The EPF8452ATC100-3N pinout in the 100-pin TQFP package is defined by the FLEX 8000 family datasheet and includes dedicated configuration pins (nCONFIG, nSTATUS, CONF_DONE, MSEL0/1, DCLK, DATA0), JTAG pins (TCK, TMS, TDI, TDO), 78 user I/Os, multiple VCC and GND pins, and dedicated JTAG/programming pins. Because pin functions are device-specific, consult the Altera pin-out table for the exact 100-TQFP ball assignments.
What tools are required to program EPF8452ATC100-3N?
Designs for the EPF8452ATC100-3N are developed using the Altera Quartus II (legacy) or MAX+PLUS II design software. Quartus II supports the FLEX 8000 family with synthesis, place-and-route, timing analysis, and programming-file generation. A programming cable (Altera USB-Blaster or ByteBlaster) is needed to load the configuration EPROM image or to program the device directly during board bring-up.
What are the key specifications of EPF8452ATC100-3N that engineers should know?
The EPF8452ATC100-3N key facts: FLEX 8000 family, 336 logic cells, 42 LABs, 78 user I/Os, approximately 4,000 usable gates, 125 MHz maximum internal frequency, 5 V ±5% supply, 0.42 µm CMOS SRAM process, 100-TQFP surface-mount package, 0 °C to 70 °C commercial temperature grade, in-circuit SRAM reconfigurability via EPC1/EPC1064/EPC1213/EPC1441 configuration devices. Designers should plan for EOL inventory because the part is obsolete as of 2026.

Data referensi engineering untuk EPF8452ATC100-3N — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose EPF8452ATC100-3N when you need a moderate-density (~4,000 usable gates) FLEX 8000 FPGA with 5 V PCI-compliant I/O and 78 user I/Os in a 100-TQFP package. It is ideal for legacy 5 V designs, including PCI bus interfaces, industrial glue logic, and telecom line-card adaptations. Choose EPF8452ATC100-3 when you need a lead-free variant of the same die; choose EPF8452ATC100-4N when you have wider timing margins and prefer lower cost. Choose EPF8282ATC100-3 when ~2,500 gates are sufficient and you want to reuse an existing 100-TQFP layout at lower density. For new designs, consider migrating to the Cyclone or MAX II family instead, as the entire FLEX 8000 family is obsolete as of 2026-09-12.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini EPF8452ATC100-3 EPF8452ATC100-4N EPF8282ATC100-3 EPF6016ATC100-3N
Package 100-TQFP 100-TQFP - same 100-TQFP - same 100-TQFP - same 100-TQFP - same
Brand Intel Intel Intel Intel Intel
Family FLEX 8000 FLEX 8000 FLEX 8000 FLEX 8000 FLEX 6000
Usable Gates ~4,000 ~4,000 ~4,000 ~2,500 ~16,000
Logic Cells 336 336 336 208 1,320
User I/Os 78 78 78 ~68 81
Speed Grade -3 -3 -4 (slower) -3 -3
Supply Voltage 5 V 5 V 5 V 5 V 5 V

Diferensiator Kunci

  • Higher logic density within the same 100-TQFP footprint (vsEPF8282ATC100-3)
  • Same-package FLEX 8000 family drop-in compatibility (vsEPF8452ATC100-4N)
  • Mature, well-documented 5 V PCI-capable I/O (vsEPF6016ATC100-3N)

Catatan Desain

EPF8452ATC100-3N requires a clean 5 V ±5% supply. Place a 0.1 µF ceramic decoupling capacitor adjacent to every VCC pin and a 10 µF bulk tantalum or ceramic at the package entry. Because the device draws surge current during configuration, ensure the upstream regulator can supply at least 200 mA peak. Decoupling the JTAG and configuration pins separately prevents configuration failures caused by supply bounce.

Use a 4-layer PCB with a continuous ground plane beneath the 100-TQFP footprint. Keep configuration traces (DCLK, DATA0, nCONFIG, nSTATUS, CONF_DONE) under 50 mm and away from switching signals. Route user I/O differential pairs with matched lengths if used for clock distribution. Provide a 100 Ω differential termination on TCK if JTAG cable length exceeds 150 mm to avoid signal-integrity issues.

Do not leave MSEL0/MSEL1 floating - they select the configuration mode (passive serial vs. parallel) and an undefined state can prevent the device from configuring. Tie CONF_DONE high through a 10 kΩ resistor to VCC for proper power-on behavior. Remember that FLEX 8000 configuration is volatile: the device loses its logic on every power-down, so a configuration EPROM (EPC1/EPC1064/EPC1213/EPC1441) is mandatory for autonomous operation.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
No
Bebas Halogena
Unknown
Mineral Konflik
Unknown

RoHS/REACH/halogen-free status not specified in verified web data. EPF8452ATC100-3N is a legacy 5 V FPGA in a commercial temperature grade; the lead-free variant is the EPF8452ATC100-3 suffix. AEC-Q100 not applicable as this is a commercial-grade programmable logic device.

Data disahkan pada: 2026-09-12 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

EPF8452ATC100-3N EPF8452ATC100-3N datasheet FLEX 8000 FPGA 4000 gates Altera FLEX 8000 100-TQFP Intel EPF8452ATC100-3N EPF8452ATC100-3N PCI interface FPGA EPF8452ATC100-3N vs EPF8452ATC100-4N EPF8452ATC100-3N buy obsolete FLEX 8000 configuration device EPC1 what is EPF8452ATC100-3N used for EPF8452ATC100-3N drop-in replacement 5V FPGA 100-pin TQFP Altera

Komponen dan Istilah Terkait

Intel Altera EPF8452ATC100-3N EPF8452ATC100-3 EPF8452ATC100-4N EPF8282ATC100-3 EPF6016ATC100-3N FLEX 8000 FPGA Field Programmable Gate Array TQFP 100-pin TQFP CMOS SRAM configuration EPC1 EPC1064 EPC1213 EPC1441 PCI bus LAB (Logic Array Block) JTAG Quartus II
Kutipan Cepat RFQ
Tim penjualan kami akan merespon dalam 24 jam
Nomor PartMfrPkgKwantitasHarga Target
×
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

Keranjang Belanja 0 item
Keranjang belanja Anda kosong
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ