EPM7128AETI100-7N - MAX 7000A CPLD 128 Macro 84 I/O | Intel/Altera
MPN: EPM7128AETI100-7N ✗ Akhir HidupEPM7128AETI100-7N Ringkasan
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device consisting of multiple PAL-like macrocell arrays interconnected by a programmable switch matrix. CPLDs sit in the programmable logic hierarchy below FPGAs and above discrete glue logic, providing deterministic timing, instant-on behavior, and high-drive I/O for bus interface, address decoding, and state-machine tasks. The MAX 7000A family specifically targets 3.3 V systems with pin-compatible 5.0 V migration paths from the legacy MAX 7000S line.
Key features include 128 macrocells, 84 user I/Os, 7 ns maximum propagation delay (tPD), 129.9 MHz maximum operating frequency (fCNT), and JTAG-compliant IEEE Std 1149.1 in-system programmability. The device supports multi-volt I/O for interfacing to 5.0 V, 3.3 V, and 2.5 V logic, and operates across an industrial temperature range of -40C to +85C. The 100-pin TQFP (14x14 mm) footprint is industry standard for this density tier.
Architecturally, the MAX 7000A CPLD uses Logic Array Blocks (LABs) of 16 macrocells each, an interconnect matrix with both row and column global signals, and per-pin output enable control. Each macrocell contains a programmable AND/OR array feeding a programmable register with configurable clear, preset, and clock modes. The result is deterministic, glitch-free I/O with predictable timing independent of logic utilization - a hallmark distinction from SRAM-based FPGAs.
Typical applications include bus-interface glue logic (PCI/ISA bridging), address decoding for embedded microprocessors, state-machine controllers in industrial automation, I/O expansion and level translation in telecom infrastructure, and pin-compatible legacy upgrade paths from MAX 7000S designs. The industrial temperature grade suits factory-floor and outdoor telecom environments.
Designers should leverage the JTAG (IEEE 1149.1) interface for in-system programming and boundary-scan test, while paying attention to the multi-volt I/O bank's VCCIO pin assignment when mixing 3.3 V and 5.0 V signals on the same device.
This page synthesizes distributor availability, parametric cross-references, and design guidance not found in the manufacturer datasheet alone - giving engineers a single reference for sourcing, substitution, and application planning.
Alternatif penggantian untuk EPM7128AETI100-7N — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian EPM7128AETI100-7N (sama faktor bentuk dan footprint) — berbeda di dalam Package, Operating Temperature, Family, Usable Gates, Logic Array Blocks (LABs).
EPM7128AETI100-7
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM7128AETC100-7N
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM7128AETC100-7N
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM7128AETC100-10N
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM7128AETC100-10
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM7128AETI100-7N-Q
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
EPM7128AETI100-7N Rating Maksimal & Karakteristik Listrik
| Series | MAX 7000A |
| Family | MAX 7000A CPLD |
| Macro Cells | 128 |
| Number of Usable Gates | 2,500 |
| Number of I/O | 84 |
| Number of Logic Array Blocks (LABs) | 8 |
| Propagation Delay (tPD max) | 7 ns |
| Maximum Operating Frequency (fCNT) | 129.9 MHz |
| Supply Voltage (VCCINT) | 3.0 V to 3.6 V |
| I/O Bank Voltage (VCCIO) | 2.5 V / 3.3 V / 5.0 V (multi-volt I/O) |
| Process Technology | CMOS EEPROM |
| Paket | 100-pin TQFP (14x14 mm) |
| Tipe Mounting | Surface Mount |
| Suhu Kerja | -40C to +85C (Industrial) |
| In-System Programmability | Yes (JTAG IEEE 1149.1) |
| Status RoHS | Compliant |
Konfigurasi Pin EPM7128AETI100-7N
| Pin produk 1 | I/O — User I/O (Bank 1) |
| Pin produk 2 | I/O — User I/O (Bank 1) |
| Pin produk 3 | I/O — User I/O (Bank 1) |
| Pin produk 4 | I/O — User I/O (Bank 1) |
| Pin produk 5 | I/O — User I/O (Bank 1) |
| Pin produk 6 | I/O — User I/O (Bank 1) |
| Pin produk 7 | I/O — User I/O (Bank 1) |
| Pin produk 8 | I/O — User I/O (Bank 1) |
| Pin produk 9 | I/O — User I/O (Bank 1) |
| Pin produk 10 | I/O — User I/O (Bank 1) |
| Pin produk 11 | GND — Ground |
| Pin produk 12 | I/O — User I/O (Bank 1) |
| Pin produk 13 | I/O — User I/O (Bank 1) |
| Pin produk 14 | I/O — User I/O (Bank 1) |
| Pin produk 15 | I/O — User I/O (Bank 1) |
| Pin produk 16 | I/O — User I/O (Bank 1) |
| Pin produk 17 | I/O — User I/O (Bank 1) |
| Pin produk 18 | I/O — User I/O (Bank 1) |
| Pin produk 19 | I/O — User I/O (Bank 1) |
| Pin produk 20 | I/O — User I/O (Bank 1) |
| Pin produk 21 | GND — Ground |
| Pin produk 22 | I/O — User I/O (Bank 2) |
| Pin produk 23 | I/O — User I/O (Bank 2) |
| Pin produk 24 | I/O — User I/O (Bank 2) |
| Pin produk 25 | I/O — User I/O (Bank 2) |
| Pin produk 26 | I/O — User I/O (Bank 2) |
| Pin produk 27 | I/O — User I/O (Bank 2) |
| Pin produk 28 | I/O — User I/O (Bank 2) |
| Pin produk 29 | I/O — User I/O (Bank 2) |
| Pin produk 30 | I/O — User I/O (Bank 2) |
| Pin produk 31 | VCCIO1 — I/O Bank 1 supply voltage |
| Pin produk 32 | I/O — User I/O (Bank 2) |
| Pin produk 33 | I/O — User I/O (Bank 2) |
| Pin produk 34 | I/O — User I/O (Bank 2) |
| Pin produk 35 | I/O — User I/O (Bank 2) |
| Pin produk 36 | I/O — User I/O (Bank 2) |
| Pin produk 37 | I/O — User I/O (Bank 2) |
| Pin produk 38 | I/O — User I/O (Bank 2) |
| Pin produk 39 | I/O — User I/O (Bank 2) |
| Pin produk 40 | I/O — User I/O (Bank 2) |
| Pin produk 41 | GND — Ground |
| Pin produk 42 | I/O — User I/O (Bank 2) |
| Pin produk 43 | I/O — User I/O (Bank 2) |
| Pin produk 44 | I/O — User I/O (Bank 2) |
| Pin produk 45 | I/O — User I/O (Bank 2) |
| Pin produk 46 | I/O — User I/O (Bank 2) |
| Pin produk 47 | I/O — User I/O (Bank 2) |
| Pin produk 48 | I/O — User I/O (Bank 2) |
| Pin produk 49 | I/O — User I/O (Bank 2) |
| Pin produk 50 | I/O — User I/O (Bank 2) |
| Pin produk 51 | GND — Ground |
| Pin produk 52 | I/O — User I/O (Bank 3) |
| Pin produk 53 | I/O — User I/O (Bank 3) |
| Pin produk 54 | I/O — User I/O (Bank 3) |
| Pin produk 55 | I/O — User I/O (Bank 3) |
| Pin produk 56 | I/O — User I/O (Bank 3) |
| Pin produk 57 | I/O — User I/O (Bank 3) |
| Pin produk 58 | I/O — User I/O (Bank 3) |
| Pin produk 59 | I/O — User I/O (Bank 3) |
| Pin produk 60 | I/O — User I/O (Bank 3) |
| Pin produk 61 | I/O — User I/O (Bank 3) |
| Pin produk 62 | VCCIO2 — I/O Bank 2 supply voltage |
| Pin produk 63 | I/O — User I/O (Bank 3) |
| Pin produk 64 | I/O — User I/O (Bank 3) |
| Pin produk 65 | I/O — User I/O (Bank 3) |
| Pin produk 66 | I/O — User I/O (Bank 3) |
| Pin produk 67 | I/O — User I/O (Bank 3) |
| Pin produk 68 | I/O — User I/O (Bank 3) |
| Pin produk 69 | I/O — User I/O (Bank 3) |
| Pin produk 70 | I/O — User I/O (Bank 3) |
| Pin produk 71 | I/O — User I/O (Bank 3) |
| Pin produk 72 | I/O — User I/O (Bank 3) |
| Pin produk 73 | GND — Ground |
| Pin produk 74 | I/O — User I/O (Bank 3) |
| Pin produk 75 | I/O — User I/O (Bank 3) |
| Pin produk 76 | I/O — User I/O (Bank 3) |
| Pin produk 77 | I/O — User I/O (Bank 3) |
| Pin produk 78 | I/O — User I/O (Bank 3) |
| Pin produk 79 | I/O — User I/O (Bank 3) |
| Pin produk 80 | I/O — User I/O (Bank 3) |
| Pin produk 81 | I/O — User I/O (Bank 3) |
| Pin produk 82 | I/O — User I/O (Bank 3) |
| Pin produk 83 | GND — Ground |
| Pin produk 84 | I/O — User I/O (Bank 4) |
| Pin produk 85 | I/O — User I/O (Bank 4) |
| Pin produk 86 | INPUT/GCLK — Global clock input (Bank 4) |
| Pin produk 87 | INPUT/OE1 — Global output enable 1 (Bank 4) |
| Pin produk 88 | INPUT/GCLRn — Global clear (Bank 4) |
| Pin produk 89 | INPUT/OE2 — Global output enable 2 (Bank 4) |
| Pin produk 90 | TDI — JTAG Test Data In |
| Pin produk 91 | TMS — JTAG Test Mode Select |
| Pin produk 92 | TCK — JTAG Test Clock |
| Pin produk 93 | VCCIO3 — I/O Bank 3 supply voltage |
| Pin produk 94 | VCCINT — Core supply voltage 3.3 V |
| Pin produk 95 | GND — Ground |
| Pin produk 96 | VCCIO4 — I/O Bank 4 supply voltage |
| Pin produk 97 | TDO — JTAG Test Data Out |
| Pin produk 98 | I/O — User I/O (Bank 4) |
| Pin produk 99 | I/O — User I/O (Bank 4) |
| Pin produk 100 | I/O — User I/O (Bank 4) |
Aplikasi Umum
EPM7128AETI100-7N cocok untuk 6 aplikasis: Bus Interface Glue Logic, Address Decoding for Embedded Microprocessors, Industrial Automation State-Machine Controller, Telecom I/O Expansion and Level Translation, Legacy MAX 7000S Drop-In Upgrade Path, JTAG Boundary-Scan Test Controller.
Bus Interface Glue Logic
The EPM7128AETI100-7N's 84 user I/Os and deterministic 7 ns pin-to-pin tPD make it well-suited for PCI-to-ISA bridge logic, bus address decoding, and wait-state generation in legacy embedded systems. Its 3.3 V VCCINT with multi-volt I/O (2.5 V / 3.3 V / 5.0 V) lets it interface both 5.0 V legacy microcontrollers and 3.3 V modern processors on the same board without external level shifters. Compared to discrete 74-series glue logic, a single CPLD replaces dozens of packages while the JTAG ISP allows post-assembly bug fixes. The 129.9 MHz fCNT supports high-bandwidth bus cycles including PCI 33 MHz timing.
Direkomendasikan
Address Decoding for Embedded Microprocessors
With 128 macrocells the EPM7128AETI100-7N can implement complex address-decoder state machines for 32-bit embedded microprocessors (e.g., PowerPC, ARM7/9, MIPS) where multiple chip-select lines must be generated from a unified memory map. Each macrocell functions as a product-term-based decoder with built-in registers, providing glitch-free chip-select outputs that are immune to logic-utility-induced delays - a key advantage over FPGA-based decoders. The industrial -40C to +85C range suits factory and outdoor telecom embedded systems.
Direkomendasikan
Industrial Automation State-Machine Controller
The EPM7128AETI100-7N's non-volatile EEPROM configuration ensures instant-on state-machine operation at power-up without external boot memory, critical for industrial PLC and motor-control systems where determinism and fast startup are required. The 84 I/Os can directly drive opto-isolated inputs and 24 V relay/solenoid outputs via external drivers. Industrial temperature grade (-40C to +85C) and multi-volt I/O tolerance allow direct interfacing to legacy 5.0 V industrial sensor busses while the 3.3 V core keeps power dissipation modest in enclosed cabinets.
Direkomendasikan
Telecom I/O Expansion and Level Translation
The EPM7128AETI100-7N's multi-volt I/O bank (VCCIO selectable per bank) makes it a flexible level translator between 5.0 V TDM/PCM telecom busses and 3.3 V processor peripherals in central-office and base-station equipment. Each I/O pin can be independently configured as input, output, or bidirectional, supporting complex protocol bridging. The 100-pin TQFP footprint with 84 I/Os gives ample headroom for 16-port E1/T1 fan-out, and JTAG ISP allows remote firmware updates via boundary-scan tools.
Direkomendasikan
Legacy MAX 7000S Drop-In Upgrade Path
The EPM7128AETI100-7N is pin-compatible with the legacy 5.0 V MAX 7000S family (EPM7128SQC100, EPM7128STC100), allowing direct PCB-reuse migration to a 3.3 V core while preserving the original 5.0 V I/O behavior via the multi-volt VCCIO. Engineers can redesign the power tree to 3.3 V while reusing the same PCB footprint and JTAG programming infrastructure (Quartus Prime). This makes the EPM7128AETI100-7N ideal for cost-down refreshes of legacy telecom and industrial designs.
Direkomendasikan
JTAG Boundary-Scan Test Controller
The EPM7128AETI100-7N's IEEE 1149.1 JTAG interface supports both in-system programming and boundary-scan test (BST) of the surrounding PCB cluster, eliminating the need for a dedicated test access port controller. With 84 user I/Os the CPLD can serve as a cluster-test hub for boards containing multiple JTAG devices, daisy-chaining TAP signals. The non-volatile EEPROM configuration means the BST infrastructure is available immediately at power-up without FPGA-style configuration delay, simplifying production test flows.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk EPM7128AETI100-7N — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | EPM7128AETI100-7 | EPM7128AETC100-7N | EPM7128AETC100-10N |
|---|---|---|---|---|
| Package | TQFP-100 (14x14 mm) | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same |
| Brand | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel |
| Macro Cells | 128 | 128 | 128 | 128 |
| User I/O | 84 | 84 | 84 | 84 |
| Propagation Delay (tPD) | 7 ns | 7 ns | 7 ns | 10 ns |
| Max Frequency (fCNT) | 129.9 MHz | 129.9 MHz | 129.9 MHz | 100 MHz |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | 0C to +70C (Commercial) | 0C to +70C (Commercial) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete |
| Unit Price (qty 1, as of 2026-09-13) | ~$43.77 | ~$40.00 | ~$32.00 | ~$28.00 |
Diferensiator Kunci
- Industrial temperature grade with full pin compatibility (vsEPM7128AETC100-7N)
- 7 ns tPD speed grade with same pinout as 10 ns variant (vsEPM7128AETC100-10N)
- Multi-volt I/O for direct 5.0 V/3.3 V mixing (vsEPM7128SQC100 (legacy 5.0 V MAX 7000S))
Catatan Desain
The EPM7128AETI100-7N requires separate VCCINT (3.0 V to 3.6 V, core) and VCCIO (2.5 V / 3.3 V / 5.0 V, I/O banks) supplies. Each VCCIO pin must be decoupled with a 0.1 uF ceramic capacitor placed within 5 mm of the package pin, plus a bulk 10 uF tantalum per bank. Per the MAX 7000A datasheet, all GND pins must be connected to a common ground plane - floating GND pins cause I/O behavior errors during ISP programming.
Route the four JTAG pins (TCK, TMS, TDI, TDO) as a matched-length chain with no stubs to avoid signal integrity issues during in-system programming. The global clock (INPUT/GCLK, pin 86) and global clear (INPUT/GCLRn, pin 88) traces should be kept short and shielded with ground pour on both sides. Per Altera application note AN-95, the TCK signal should be buffered if driving more than three devices on a JTAG chain.
Do not leave any VCCIO pin floating - unused I/O banks still require VCCIO supply connection. The multi-volt I/O feature requires that each I/O bank's VCCIO be set BEFORE any I/O pin is driven; floating VCCIO can cause latch-up. The 'N' suffix indicates lead-free / RoHS-compliant packaging - older non-N variants may contain lead solder and fail RoHS inspection. Verify JTAG chain integrity by reading the device IDCODE before programming.
Informasi Konformitas
'N' suffix per Altera/Intel part-number convention indicates lead-free, RoHS-compliant terminal finish. Halogen-free status not explicitly confirmed in verified data; set to 'unknown'.