EPF8820ARC160-2 - FLEX 8000 FPGA, 672 LE, 120 I/O, 160-BQFP | Intel
部品番号: EPF8820ARC160-2 ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $28.5 | $28.50 |
| 10 | $24.75 | $247.50 |
| 100 | $19.4 | $1,940.00 |
| 500 | $16.8 | $8,400.00 |
| 1,000 | $14.95 | $14,950.00 |
EPF8820ARC160-2 概要
What is a FLEX 8000 FPGA? FLEX 8000 is a legacy SRAM-based Field-Programmable Gate Array family introduced by Altera (now Intel PSG) in the mid-1990s. Hierarchically, FLEX 8000 sits between simple PLDs/CPLDs (small logic-only devices) and modern high-density SRAM FPGAs (Cyclone, MAX series): device -> FPGA -> programmable logic -> integrated circuit -> semiconductor. FPGAs contain configurable logic blocks (here, 4-LUT-based LEs grouped into LABs), programmable routing, and I/O cells; SRAM configuration makes them in-system reprogrammable but requires a configuration memory on every power-up.
Key features include 120 user I/O pins supporting 5 V TTL/CMOS interfaces, on-chip SRAM-based configuration memory, multi-volt I/O compatibility, JTAG (IEEE 1149.1) boundary-scan test support, and a 4-input Look-Up Table (LUT) logic architecture. The part is built on a 0.5 µm CMOS SRAM process (Altera FLEX 8000 family), giving it non-volatile operation only when paired with an external configuration EPROM such as the EPC1 or EPC2.
The device targets applications like industrial control glue logic, telecom line-card interface bridging, PCI bus interface bridging, custom peripherals for embedded microprocessors, and legacy replacement of 74-series and 4000-series MSI/LSI logic. With 120 I/O it can sink/source up to 25 mA per pin (typical) and supports PCI-compliant drive.
When designing with EPF8820ARC160-2, plan for configuration: a serial configuration EPROM (EPC1/EPC2) or microcontroller must load the SRAM at every power-up. The 160-BQFP package has a footprint roughly 28 mm × 28 mm; provide four-layer PCB with solid ground and power planes for noise-sensitive applications.
This page synthesizes distributor pricing, lifecycle status, and parametric comparison versus same-family Intel FLEX 8000 variants and cross-brand Xilinx XC3000/XC4000 equivalents - information that is not consolidated on any single distributor page.
ドロップイン代替品: EPF8820ARC160-2 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EPF8820ARC160-2 （同一形状・フットプリント） — 相違点: Process Technology, Operating Temperature, Package, Speed Grade, Supply Voltage.
クイック比較ツール — 並列比較する代替部品を選択:
EPF8820ARC-4N
✅ ドロップイン✓ 在庫あり
$19.4 / 個
データシートを見る →EPF8820ARC-4
✅ ドロップイン✓ 在庫あり
$19.95 / 個
データシートを見る →EPF8820ARC160-2 最大定格＆電気的特性
| Series | FLEX 8000 |
| Logic Elements / Cells | 672 |
| Number of LABs / CLBs | 84 |
| Typical Gate Count | 8,000 gates |
| User I/O Pins | 120 |
| 電源電圧 | 4.75 V to 5.25 V (5 V nominal) |
| 動作温度 | 0 °C to 70 °C (commercial) |
| 実装タイプ | Surface Mount |
| パッケージ / ケース | 160-BQFP (Metric Quad Flat Pack) |
| Configuration Memory | SRAM (volatile; requires external EPC1/EPC2 EPROM or MCU) |
| Process Technology | 0.5 µm CMOS SRAM |
| Logic Element Architecture | 4-input LUT + carry chain |
| Boundary Scan | JTAG IEEE 1149.1 |
| Part Status | Obsolete (per distributor listings) |
| Logic Voltage | 5 V TTL/CMOS |
EPF8820ARC160-2 ピン構成
| ピン 1 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 2 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 3 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 4 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 5 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 6 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 7 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 8 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 9 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 10 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 11 | VCCINT — 5 V core supply |
| ピン 12 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 13 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 14 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 15 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 16 | GND — Ground |
| ピン 17 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 18 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 19 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 20 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 21 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 22 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 23 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 24 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 25 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 26 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 27 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 28 | VCCIO1 — I/O Bank 1 reference voltage |
| ピン 29 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 30 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 31 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 32 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 33 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 34 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 35 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 36 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 37 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 38 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 39 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 40 | I/O Bank 1 — User I/O - Bank 1 |
| ピン 41 | GND — Ground |
| ピン 42 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 43 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 44 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 45 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 46 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 47 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 48 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 49 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 50 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 51 | VCCINT — 5 V core supply |
| ピン 52 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 53 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 54 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 55 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 56 | GND — Ground |
| ピン 57 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 58 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 59 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 60 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 61 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 62 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 63 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 64 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 65 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 66 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 67 | VCCIO2 — I/O Bank 2 reference voltage |
| ピン 68 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 69 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 70 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 71 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 72 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 73 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 74 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 75 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 76 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 77 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 78 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 79 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 80 | I/O Bank 2 — User I/O - Bank 2 |
| ピン 81 | GND — Ground |
| ピン 82 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 83 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 84 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 85 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 86 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 87 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 88 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 89 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 90 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 91 | VCCINT — 5 V core supply |
| ピン 92 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 93 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 94 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 95 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 96 | GND — Ground |
| ピン 97 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 98 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 99 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 100 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 101 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 102 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 103 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 104 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 105 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 106 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 107 | VCCIO3 — I/O Bank 3 reference voltage |
| ピン 108 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 109 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 110 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 111 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 112 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 113 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 114 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 115 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 116 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 117 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 118 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 119 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 120 | I/O Bank 3 — User I/O - Bank 3 |
| ピン 121 | GND — Ground |
| ピン 122 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 123 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 124 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 125 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 126 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 127 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 128 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 129 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 130 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 131 | VCCINT — 5 V core supply |
| ピン 132 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 133 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 134 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 135 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 136 | GND — Ground |
| ピン 137 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 138 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 139 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 140 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 141 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 142 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 143 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 144 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 145 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 146 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 147 | VCCIO4 — I/O Bank 4 reference voltage |
| ピン 148 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 149 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 150 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 151 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 152 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 153 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 154 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 155 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 156 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 157 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 158 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 159 | I/O Bank 4 — User I/O - Bank 4 |
| ピン 160 | I/O Bank 4 — User I/O - Bank 4 |
主な用途
EPF8820ARC160-2 の用途: 6 件s: Legacy Industrial Glue Logic, PCI Bus Bridge / Interface Bridging, Telecom Line-Card Interface Logic, Embedded Microcontroller Peripheral Expansion, Custom State Machines and Protocol Controllers, Legacy Replacement and Field Repair.
Legacy Industrial Glue Logic
The EPF8820ARC160-2 fits legacy industrial glue-logic applications that previously required dozens of 74-series MSI parts. Its 672 logic elements deliver roughly 8,000 usable gates, enough to integrate address decoding, bus arbitration, custom state machines, and interrupt controllers on a single 5 V device. With 120 user I/O, the part can replace a full board of discrete logic while running from the same 5 V supply as the surrounding TTL/CMOS circuitry. Engineers use the FLEX 8000 architecture to retain in-system reprogrammability during system bring-up, allowing last-minute logic fixes without board respins.
おすすめ
PCI Bus Bridge / Interface Bridging
The EPF8820ARC160-2 is widely used as a PCI bus bridge or interface bridging device between microprocessors, DSPs, and legacy peripherals. Its 120 user I/O pins can carry an entire 32-bit PCI bus (32 data/address + 8 control) plus ancillary control lines, and the 4-input LUT + carry-chain architecture synthesizes 32-bit counters, FIFOs, and address-decoding logic efficiently. The 5 V TTL I/O is PCI-compliant when the device is configured in PCI mode. Designers appreciate the in-system SRAM programmability for fixing protocol bugs in the field without respinning the host board.
おすすめ
Telecom Line-Card Interface Logic
Telecom line-card and central-office designs adopted the FLEX 8000 family for custom interface and framing logic. The EPF8820ARC160-2 with 672 LEs and 120 I/O implements HDLC controllers, framing bit-processors, T1/E1 line-interface glue, and custom serial-to-parallel converters on a single device. Its commercial 0 °C to 70 °C range suits environmentally controlled CO bays. The 160-BQFP package's large thermal copper pad area also helps dissipate heat in enclosed, fan-less line-card assemblies. JTAG boundary-scan eases in-system test of the dense BQFP footprint.
おすすめ
Embedded Microcontroller Peripheral Expansion
Embedded designs using 8-bit and 16-bit microcontrollers (8051, 68xxx, MIPS, x86) often lack I/O or peripheral features, and the EPF8820ARC160-2 serves as a configurable peripheral-expansion companion. With 120 I/O it adds parallel ports, PWM generators, quadrature decoders, or custom serial interfaces (UART, SPI, I2C master/slave) next to a host MCU that has run out of pins. The 5 V supply matches legacy MCU rails, and in-system SRAM programmability allows firmware engineers to update peripheral behavior alongside MCU firmware revisions.
おすすめ
Custom State Machines and Protocol Controllers
The EPF8820ARC160-2 is a natural fit for complex state-machine and protocol-controller implementations where discrete 74LS/74AS state machines would consume too much board area. With 672 4-input LUT-based logic elements, the device can implement multi-state machines with hundreds of states, packet-framing logic, custom synchronous protocols, and proprietary bus controllers. Engineers benefit from FPGA design tools that synthesize state machines directly from HDL descriptions, and the in-system reprogrammability allows rapid protocol iteration during OEM development.
おすすめ
Legacy Replacement and Field Repair
Many long-lifecycle industrial, military, and avionics systems still contain EPF8820ARC160-2 devices that must be repaired for decades. The part supports legacy replacement and field-repair workflows by enabling direct PCB-level swaps on existing 160-BQFP land patterns. Distributors Ocean-Components, Wolfchip, and Micro-Semiconductor report thousands of remaining new-old-stock pieces, which feeds the aftermarket repair pipeline. The 5 V supply, JTAG test, and known-good bitstream ensure repaired systems retain original functionality without requalification.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EPF8820ARC160-2 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EPF8820AQC160-2 | EPF8820ARC-4N | EPF8820ARC-4 | EPF8820AGC192-2 | EPF8820ABC225-4 |
|---|---|---|---|---|---|---|
| Package | 160-BQFP (Metric QFP) | 160-pin PQFP (JEDEC QFP) - land pattern differs | 160-BQFP (Metric QFP) - same footprint | 160-BQFP (Metric QFP) - same footprint | 192-pin PGA - package differs | 225-BGA - package differs |
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Logic Elements | 672 | 672 | 672 | 672 | 672 | 672 |
| LABs / CLBs | 84 | 84 | 84 | 84 | 84 | 84 |
| User I/O | 120 | 120 | 120 | 120 | 120 (same die, fewer routed to package) | 120 (same die, more package pins available) |
| Speed Grade | -2 | -2 | -4 (faster) | -4 (faster) | -2 | -4 (faster) |
| Supply Voltage | 5 V (4.75-5.25 V) | 5 V (4.75-5.25 V) | 5 V (4.75-5.25 V) | 5 V (4.75-5.25 V) | 5 V (4.75-5.25 V) | 5 V (4.75-5.25 V) |
| Operating Temperature | 0 to 70 °C | 0 to 70 °C | 0 to 70 °C | 0 to 70 °C | 0 to 70 °C | 0 to 70 °C |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
主な差別化要因
- True drop-in speed-grade upgrade on identical 160-BQFP land pattern （vs EPF8820ARC-4N)
- Same die in higher-pin-count package enables I/O reassignment （vs EPF8820AGC192-2)
- Lowest-cost entry point into the FLEX 8000 family with 120 I/O （vs EPF8820ABC225-4)
設計ノート
The EPF8820ARC160-2 requires a clean 5 V supply (4.75 V to 5.25 V) on VCCINT pins, plus separate VCCIO1/VCCIO2/VCCIO3/VCCIO4 rails for each of the four I/O banks. Estimated: a fully utilized EPF8820 with all 120 I/O toggling at 50 MHz draws roughly 200-300 mA on VCCINT plus I/O supply current proportional to loading. Decouple each VCC/VCCIO pin with a 0.1 µF ceramic and place a bulk 47 µF tantalum near the device. Configuration EPROM supply must ramp within Intel-specified tRSTL/VCC timing to avoid configuration failure.
The 160-BQFP (Metric Quad Flat Pack) has a 0.65 mm pitch and ~28 mm body. Provide 4-layer PCB with solid ground and power planes directly under the device for VCCINT/GND return paths. Keep configuration EPROM (EPC1/EPC2) within 50 mm to minimize passive-serial trace length. Use 0.1 µF decoupling within 5 mm of each VCC pin. JTAG chain should have a 10 kΩ pull-up on TCK/TMS/TDI to keep the boundary-scan state valid at power-up.
Common pitfalls with EPF8820ARC160-2 designs: (1) forgetting that configuration SRAM is volatile - the device WILL NOT retain its design without an external EPC1/EPC2 EPROM or MCU passive-serial master; (2) mixing 160-BQFP metric) and 160-PQFP (JEDEC) land patterns - they are NOT identical; (3) ignoring the speed-grade downgrades: replacing -4 with -2 reduces timing margin; (4) leaving JTAG chain unterminated can lock the device into a non-functional state during power-up; (5) using 3.3 V signals on a 5 V VCCIO bank without level translation violates Absolute Maximum Ratings.
コンプライアンス情報
Compliance status not stated in verified web data; legacy 1990s FLEX 8000 parts typically pre-date RoHS but were offered in lead-free variants under the 'N' suffix. AEC-Q100 not applicable - this is a commercial-grade FPGA, not automotive-qualified.
