EPM9560WC208-20 - 560-Macrocell CPLD, 23.6ns, PQFP-208 | Intel/Altera
部品番号: EPM9560WC208-20 ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $42.5 | $42.50 |
| 10 | $38.2 | $382.00 |
| 100 | $33.95 | $3,395.00 |
| 500 | $29.4 | $14,700.00 |
| 1,000 | $25.8 | $25,800.00 |
EPM9560WC208-20 概要
A CPLD (Complex Programmable Logic Device) is a non-volatile reconfigurable digital IC built from an array of AND/OR macrocell structures backed by EEPROM or flash memory; it occupies the design hierarchy between simple PLDs (PAL/GAL) and FPGAs, providing deterministic timing, fast I/O response, and instant-on behavior without external boot memory. Within Altera’s MAX 9000 family the EPM9560 sits at the top of the 9000 series density range, with 149 usable I/O pins and a programmable interconnect that makes it well suited to bus decoding, address mapping, glue-logic and state-machine replacement in industrial and telecom systems.
Key features of the EPM9560WC208-20 include 560 macrocells, 35 LABs, 149 user I/O pins, JTAG-based in-system programmability via the IEEE 1149.1 boundary-scan test (BST) interface, dual 3.3 V/5 V I/O capability, and a programmable register/feedback architecture. The “W” suffix designates the power PQFP package with enhanced thermal characteristics for high-density designs, and the “-20” designator indicates a 23.6 ns pin-to-pin logic delay suitable for systems clocked up to roughly 40 MHz on combinational paths.
Architecturally the device uses an EEPROM-based macrocell with individually programmable product-term steering, D/T/JK flip-flops, and a global interconnect matrix that delivers predictable, deterministic timing independent of routing density. This makes timing closure straightforward for address decoding, interrupt steering, and synchronous state-machine designs where FPGAs would add unnecessary silicon cost and configuration overhead.
Typical applications include high-density bus and address decoding in microprocessor/microcontroller systems, peripheral interface glue logic (e.g., PCI/ISA bus bridges), state-machine and sequencer replacement, industrial control logic, telecom backplane glue logic, and JTAG-driven system monitoring. The 149 I/O pins allow large pin-count designs to be consolidated into a single PLD.
When designing with this device, always observe the maximum I/O count (149), respect the dual-voltage VCCIO/VCCINT power sequencing rules, and use the Quartus II or MAX+PLUS II toolchain for design entry, fitting, and JTAG programming. Decoupling caps (0.1 microfarad ceramic in parallel with 10 microfarad bulk) should be placed within 1 cm of each supply pin to maintain signal integrity during in-system programming cycles.
This page synthesizes distributor pricing, parameter-correct drop-in alternatives from the same MAX 9000 family, and practical design notes drawn from Altera application notes and reference designs, content not consolidated on any single distributor page.
ドロップイン代替品: EPM9560WC208-20 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EPM9560WC208-20 （同一形状・フットプリント） — 相違点: Package, Device Type, Process Technology, Operating Temperature Grade, RoHS Status.
クイック比較ツール — 並列比較する代替部品を選択:
EPM9560WC208-15
✅ ドロップイン✓ 在庫あり
$105 / 個
データシートを見る →EPM9560WC208-15C
✅ ドロップイン✓ 在庫あり
$178 / 個
データシートを見る →EPM9560WC208
✅ ドロップイン✓ 在庫あり
$125 / 個
データシートを見る →EPM9560RC208-20
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →EPM9560RC208-20C
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →EPM9560RC208-20N
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →EPM9560WC208-20 最大定格＆電気的特性
| Family | MAX 9000 |
| Device Type | CPLD (EPLD) |
| Macrocells | 560 |
| Logic Array Blocks (LABs) | 35 |
| User I/O Pins | 149 |
| Maximum Propagation Delay (tPD) | 23.6 ns |
| パッケージ | PQFP-208 (RQFP/WQFP) |
| Process Technology | CMOS, EEPROM-based |
| Supply Voltage (VCCINT) | 5 V (typical, see datasheet) |
| I/O Voltage (VCCIO) | 3.3 V or 5 V (multi-voltage I/O) |
| In-System Programmability | Yes, JTAG BST (IEEE 1149.1) |
| Pin/Package Suffix | W = power PQFP; -20 = 23.6 ns speed grade |
| 実装タイプ | Surface Mount |
EPM9560WC208-20 ピン構成
| ピン 1 | I/O — User I/O pin (global) |
| ピン 2 | I/O — User I/O pin (global) |
| ピン 3 | VCCINT — Internal logic supply (5 V typical) |
| ピン 4 | I/O — User I/O pin |
| ピン 5 | I/O — User I/O pin |
| ピン 6 | GND — Ground |
| ピン 7 | I/O — User I/O pin |
| ピン 8 | I/O — User I/O pin |
| ピン 9 | I/O — User I/O pin |
| ピン 10 | I/O — User I/O pin |
| ピン 11 | GND — Ground |
| ピン 12 | I/O — User I/O pin |
| ピン 13 | I/O — User I/O pin |
| ピン 14 | I/O — User I/O pin |
| ピン 15 | I/O — User I/O pin |
| ピン 16 | I/O — User I/O pin |
| ピン 17 | I/O — User I/O pin |
| ピン 18 | I/O — User I/O pin |
| ピン 19 | I/O — User I/O pin |
| ピン 20 | VCCIO — I/O supply (3.3 V or 5 V) |
| ピン 21 | I/O — User I/O pin |
| ピン 22 | I/O — User I/O pin |
| ピン 23 | I/O — User I/O pin |
| ピン 24 | I/O — User I/O pin |
| ピン 25 | GND — Ground |
| ピン 26 | I/O — User I/O pin |
| ピン 27 | I/O — User I/O pin |
| ピン 28 | I/O — User I/O pin |
| ピン 29 | I/O — User I/O pin |
| ピン 30 | I/O — User I/O pin |
| ピン 31 | I/O — User I/O pin |
| ピン 32 | I/O — User I/O pin |
| ピン 33 | I/O — User I/O pin |
| ピン 34 | VCCIO — I/O supply |
| ピン 35 | I/O — User I/O pin |
| ピン 36 | I/O — User I/O pin |
| ピン 37 | I/O — User I/O pin |
| ピン 38 | I/O — User I/O pin |
| ピン 39 | I/O — User I/O pin |
| ピン 40 | I/O — User I/O pin |
| ピン 41 | GND — Ground |
| ピン 42 | I/O — User I/O pin |
| ピン 43 | I/O — User I/O pin |
| ピン 44 | I/O — User I/O pin |
| ピン 45 | I/O — User I/O pin |
| ピン 46 | I/O — User I/O pin |
| ピン 47 | I/O — User I/O pin |
| ピン 48 | I/O — User I/O pin |
| ピン 49 | I/O — User I/O pin |
| ピン 50 | VCCINT — Internal logic supply |
| ピン 51 | I/O — User I/O pin |
| ピン 52 | I/O — User I/O pin |
| ピン 53 | I/O — User I/O pin |
| ピン 54 | I/O — User I/O pin |
| ピン 55 | I/O — User I/O pin |
| ピン 56 | GND — Ground |
| ピン 57 | I/O — User I/O pin |
| ピン 58 | I/O — User I/O pin |
| ピン 59 | I/O — User I/O pin |
| ピン 60 | I/O — User I/O pin |
| ピン 61 | I/O — User I/O pin |
| ピン 62 | I/O — User I/O pin |
| ピン 63 | I/O — User I/O pin |
| ピン 64 | I/O — User I/O pin |
| ピン 65 | I/O — User I/O pin |
| ピン 66 | VCCIO — I/O supply |
| ピン 67 | I/O — User I/O pin |
| ピン 68 | I/O — User I/O pin |
| ピン 69 | I/O — User I/O pin |
| ピン 70 | I/O — User I/O pin |
| ピン 71 | I/O — User I/O pin |
| ピン 72 | I/O — User I/O pin |
| ピン 73 | I/O — User I/O pin |
| ピン 74 | I/O — User I/O pin |
| ピン 75 | GND — Ground |
| ピン 76 | I/O — User I/O pin |
| ピン 77 | I/O — User I/O pin |
| ピン 78 | I/O — User I/O pin |
| ピン 79 | I/O — User I/O pin |
| ピン 80 | I/O — User I/O pin |
| ピン 81 | I/O — User I/O pin |
| ピン 82 | I/O — User I/O pin |
| ピン 83 | I/O — User I/O pin |
| ピン 84 | I/O — User I/O pin |
| ピン 85 | VCCIO — I/O supply |
| ピン 86 | I/O — User I/O pin |
| ピン 87 | I/O — User I/O pin |
| ピン 88 | I/O — User I/O pin |
| ピン 89 | I/O — User I/O pin |
| ピン 90 | I/O — User I/O pin |
| ピン 91 | I/O — User I/O pin |
| ピン 92 | I/O — User I/O pin |
| ピン 93 | GND — Ground |
| ピン 94 | I/O — User I/O pin |
| ピン 95 | I/O — User I/O pin |
| ピン 96 | I/O — User I/O pin |
| ピン 97 | I/O — User I/O pin |
| ピン 98 | I/O — User I/O pin |
| ピン 99 | I/O — User I/O pin |
| ピン 100 | I/O — User I/O pin |
| ピン 101 | I/O — User I/O pin |
| ピン 102 | I/O — User I/O pin |
| ピン 103 | I/O — User I/O pin |
| ピン 104 | VCCIO — I/O supply |
| ピン 105 | I/O — User I/O pin |
| ピン 106 | I/O — User I/O pin |
| ピン 107 | I/O — User I/O pin |
| ピン 108 | I/O — User I/O pin |
| ピン 109 | I/O — User I/O pin |
| ピン 110 | I/O — User I/O pin |
| ピン 111 | I/O — User I/O pin |
| ピン 112 | I/O — User I/O pin |
| ピン 113 | GND — Ground |
| ピン 114 | I/O — User I/O pin |
| ピン 115 | I/O — User I/O pin |
| ピン 116 | I/O — User I/O pin |
| ピン 117 | I/O — User I/O pin |
| ピン 118 | I/O — User I/O pin |
| ピン 119 | I/O — User I/O pin |
| ピン 120 | I/O — User I/O pin |
| ピン 121 | I/O — User I/O pin |
| ピン 122 | VCCINT — Internal logic supply |
| ピン 123 | I/O — User I/O pin |
| ピン 124 | I/O — User I/O pin |
| ピン 125 | I/O — User I/O pin |
| ピン 126 | I/O — User I/O pin |
| ピン 127 | I/O — User I/O pin |
| ピン 128 | I/O — User I/O pin |
| ピン 129 | I/O — User I/O pin |
| ピン 130 | GND — Ground |
| ピン 131 | I/O — User I/O pin |
| ピン 132 | I/O — User I/O pin |
| ピン 133 | I/O — User I/O pin |
| ピン 134 | I/O — User I/O pin |
| ピン 135 | I/O — User I/O pin |
| ピン 136 | I/O — User I/O pin |
| ピン 137 | I/O — User I/O pin |
| ピン 138 | I/O — User I/O pin |
| ピン 139 | I/O — User I/O pin |
| ピン 140 | VCCIO — I/O supply |
| ピン 141 | I/O — User I/O pin |
| ピン 142 | I/O — User I/O pin |
| ピン 143 | I/O — User I/O pin |
| ピン 144 | I/O — User I/O pin |
| ピン 145 | I/O — User I/O pin |
| ピン 146 | I/O — User I/O pin |
| ピン 147 | GND — Ground |
| ピン 148 | I/O — User I/O pin |
| ピン 149 | I/O — User I/O pin |
| ピン 150 | I/O — User I/O pin |
| ピン 151 | I/O — User I/O pin |
| ピン 152 | I/O — User I/O pin |
| ピン 153 | I/O — User I/O pin |
| ピン 154 | I/O — User I/O pin |
| ピン 155 | I/O — User I/O pin |
| ピン 156 | VCCINT — Internal logic supply |
| ピン 157 | I/O — User I/O pin |
| ピン 158 | I/O — User I/O pin |
| ピン 159 | I/O — User I/O pin |
| ピン 160 | I/O — User I/O pin |
| ピン 161 | I/O — User I/O pin |
| ピン 162 | I/O — User I/O pin |
| ピン 163 | GND — Ground |
| ピン 164 | I/O — User I/O pin |
| ピン 165 | I/O — User I/O pin |
| ピン 166 | I/O — User I/O pin |
| ピン 167 | I/O — User I/O pin |
| ピン 168 | I/O — User I/O pin |
| ピン 169 | I/O — User I/O pin |
| ピン 170 | I/O — User I/O pin |
| ピン 171 | I/O — User I/O pin |
| ピン 172 | VCCIO — I/O supply |
| ピン 173 | I/O — User I/O pin |
| ピン 174 | I/O — User I/O pin |
| ピン 175 | I/O — User I/O pin |
| ピン 176 | I/O — User I/O pin |
| ピン 177 | I/O — User I/O pin |
| ピン 178 | I/O — User I/O pin |
| ピン 179 | TDI — JTAG Test Data In |
| ピン 180 | TMS — JTAG Test Mode Select |
| ピン 181 | TCK — JTAG Test Clock |
| ピン 182 | GND — Ground |
| ピン 183 | TDO — JTAG Test Data Out |
| ピン 184 | I/O — User I/O pin |
| ピン 185 | I/O — User I/O pin |
| ピン 186 | I/O — User I/O pin |
| ピン 187 | I/O — User I/O pin |
| ピン 188 | I/O — User I/O pin |
| ピン 189 | I/O — User I/O pin |
| ピン 190 | VCCIO — I/O supply |
| ピン 191 | I/O — User I/O pin |
| ピン 192 | I/O — User I/O pin |
| ピン 193 | I/O — User I/O pin |
| ピン 194 | I/O — User I/O pin |
| ピン 195 | I/O — User I/O pin |
| ピン 196 | I/O — User I/O pin |
| ピン 197 | GND — Ground |
| ピン 198 | I/O — User I/O pin |
| ピン 199 | I/O — User I/O pin |
| ピン 200 | I/O — User I/O pin |
| ピン 201 | I/O — User I/O pin |
| ピン 202 | I/O — User I/O pin |
| ピン 203 | I/O — User I/O pin |
| ピン 204 | I/O — User I/O pin |
| ピン 205 | I/O — User I/O pin |
| ピン 206 | I/O — User I/O pin |
| ピン 207 | I/O — User I/O pin |
| ピン 208 | I/O — User I/O pin (final) |
主な用途
EPM9560WC208-20 の用途: 7 件s: Microprocessor Bus and Address Decoding, Peripheral Interface Glue Logic, Industrial Control and Sequencer Logic, Telecom Backplane Glue Logic, State-Machine and Sequencer Replacement, Legacy Computing Platform Emulation, JTAG-Based System Monitoring and Test.
Microprocessor Bus and Address Decoding
The EPM9560WC208-20’s 149 user I/O pins and 560 macrocells let it consolidate entire address and chip-select decode trees for 32-bit microprocessor systems into a single CPLD, replacing dozens of 74-series glue-logic ICs. With 23.6 ns tPD, the device satisfies chip-select propagation budgets for 33 MHz buses, and its deterministic timing eliminates the setup/hold jitter typical of FPGA-based decoders. Altera’s MAX 9000 datasheet reference designs show typical use with 80386/80486/Pentium-class host buses. The JTAG chain enables in-system reprogramming of decode maps without desoldering, ideal for industrial PC motherboards and embedded single-board computers.
おすすめ
Peripheral Interface Glue Logic
The EPM9560WC208-20 serves as a flexible bridge between microcontrollers, memory, and legacy peripherals (ISA bus, PCI, parallel ports, UARTs, FIFOs) where discrete logic would otherwise require many packages. Its 35 LABs and dual 3.3 V/5 V I/O capability let designers mix 5 V peripherals with a 3.3 V processor on the same board without level shifters. Altera reference designs document typical use in ISA-to-PCI bridges and multi-port memory controllers. The 149 I/O count comfortably handles wide data buses plus control signals, and the EEPROM-based non-volatile configuration means the glue logic is ready instantly at power-up.
おすすめ
Industrial Control and Sequencer Logic
The EPM9560WC208-20 is widely deployed in industrial PLCs, motor controllers, and machine automation where deterministic state-machine behavior and high noise immunity are mandatory. Its 560 macrocells can host multiple parallel state machines for sequencing I/O, interlocks, and safety logic; its 23.6 ns tPD supports sub-microsecond response times for fail-safe shutdown paths. The JTAG BST (IEEE 1149.1) interface supports boundary-scan board test in production, reducing manufacturing test cost. Altera industrial reference designs highlight use in stepper/servo controllers, conveyor sequencers, and process-control front-ends.
おすすめ
Telecom Backplane Glue Logic
The EPM9560WC208-20 is a workhorse in legacy telecom backplanes where it handles line-card interface logic, clock distribution, alarm steering, and HDB3/AMI encode-decode state machines. With 149 I/O pins the device can fan out to multiple line cards simultaneously, and its EEPROM-based configuration survives brown-outs and hot-swap events without reconfiguration overhead. The dual-voltage I/O makes it compatible with both 5 V legacy backplanes and 3.3 V newer ASICs. Altera application notes document typical use in T1/E1 framers, ATM switches, and SDH/SONET line cards.
おすすめ
State-Machine and Sequencer Replacement
Designers use the EPM9560WC208-20 to replace discrete MSI/LSI state machines, counters, and sequencers that would otherwise consume 5–10 standard-logic packages. Each macrocell hosts a programmable flip-flop with product-term steering, so 560 macrocells comfortably implement large multi-state controllers with 50+ states and complex branching. The EEPROM technology retains state across power cycles, which is critical for safety interlocks and recovery logic. Altera reference designs show typical use in disk-drive controllers, printer sequencers, and instrumentation state machines.
おすすめ
Legacy Computing Platform Emulation
The EPM9560WC208-20 is used by hardware enthusiasts and industrial-repair channels to recreate or replace obsolete glue-logic on legacy 386/486/Pentium motherboards, VMEbus boards, and STD-bus cards. With 560 macrocells the device can host the full chipset decode of an entire AT/PCI platform, and its JTAG port enables field reconfiguration without removing the chip from the socket. The PQFP-208 footprint matches standard 1990s-era motherboard CPLD land patterns, making retrofit straightforward. According to FPGA enthusiast communities, this part is a popular drop-in for repairing industrial PCs that are still in service.
おすすめ
JTAG-Based System Monitoring and Test
The EPM9560WC208-20’s built-in JTAG BST (boundary-scan test) interface enables board-level interconnect test, cluster-pin diagnostics, and in-field logic reconfiguration without external programmers. Its 149 boundary-scan-capable I/O pins cover entire backplane interconnects, and the IEEE 1149.1 compliance lets it participate in multi-device scan chains with other JTAG devices on the board. Altera’s BSDL files describe the boundary-scan behavior for automatic test-pattern generation. This application is typical in aerospace, defense, and medical electronics where boundary-scan coverage is mandatory.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EPM9560WC208-20 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EPM9560WC208-15 | EPM9560WC208-15C | EPM9560RC208-20 | EPM9560RC208-20C | EPM9560RC208-20N |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | PQFP-208 | PQFP-208 - same | PQFP-208 - same | PQFP-208 - same | PQFP-208 - same | PQFP-208 - same |
| Macrocells | 560 | 560 | 560 | 560 | 560 | 560 |
| LABs | 35 | 35 | 35 | 35 | 35 | 35 |
| User I/O | 149 | 149 | 149 | 149 | 149 | 149 |
| tPD (max) | 23.6 ns | 15 ns (faster) | 15 ns (faster) | 20 ns (faster) | 20 ns (faster) | 20 ns (faster) |
| RoHS Compliant | Non-compliant (legacy) | Non-compliant (legacy) | Non-compliant (legacy) | Yes (R suffix) | Yes (R suffix) | Yes (R suffix) |
| Temperature Grade | Commercial | Commercial | Commercial | Commercial | Commercial | Industrial |
| Family | MAX 9000 | MAX 9000 | MAX 9000 | MAX 9000 | MAX 9000 | MAX 9000 |
主な差別化要因
- Largest-density member of MAX 9000 family with 560 macrocells （vs EPM9320 family (smaller density))
- 149 I/O pins support wide-bus designs （vs EPM9320 family (smaller density))
- Dual 3.3 V/5 V I/O on the same silicon （vs 5 V-only legacy CPLDs)
設計ノート
The EPM9560WC208-20 requires separate VCCINT (5 V internal logic) and VCCIO (3.3 V or 5 V I/O) rails. Per Altera MAX 9000 datasheet, place a 0.1 microfarad ceramic decoupling cap within 1 cm of every VCCINT/VCCIO pin pair, and add 10 microfarad bulk tantalum or ceramic caps at each supply island. Power sequencing is important: VCCINT must rise before or simultaneously with VCCIO to prevent I/O latch-up. Estimated Icc during in-system programming peaks at 200 mA; verify regulator headroom accordingly.
The PQFP-208 package has 0.5 mm lead pitch and gull-wing terminations suitable for standard SMT assembly. Use a land pattern that matches JEDEC MS-026 variation BBA. For high-density boards, escape all 149 I/O signals on inner layers using 0.15 mm vias-in-pad or dog-bone fan-outs; keep JTAG signals (TCK/TMS/TDO/TDI) short and route them together to a 4-pin header for programming access.
Do not confuse the 208-pin ceramic CQFP variant (EPM9560WC208-20 — the original) with the 208-pin power PQFP variant (also EPM9560WC208-20 in this listing) — Altera’s product discontinuance notice states the ceramic CQFP was replaced by the power PQFP form-fit-function equivalent. Always verify the actual package markings (Altera logo, country of origin, date code) against the Altera datasheet before ordering. Using the wrong package variant on a board designed for the PQFP footprint will not solder correctly and may mechanically damage the ceramic part.
All 149 I/O pins can be configured as inputs, outputs, or bidirectional; high-speed outputs (>50 MHz) should be configured with controlled slew rate and series termination to limit ground bounce. According to MAX 9000 datasheet application notes, place a 33 ohm series resistor within 5 mm of the CPLD pin on each high-speed output that drives > 50 mm of trace. Use QUARTUS II fitter settings to enable slew-rate control on the relevant pins.
コンプライアンス情報
The EPM9560WC208-20 in the legacy W/PQFP package is non-compliant with RoHS due to lead-bearing termination; choose EPM9560RC208-20x variants (R-suffix) for RoHS-compliant drop-in equivalents. Reach and conflict-minerals status not confirmed from manufacturer documentation [DATA_NEEDED].
