Altera

EPM9560WC208-20 - 560-Macrocell CPLD, 23.6ns, PQFP-208 | Intel/Altera

Name: EPM9560WC208-20 - 560-Macrocell CPLD, 23.6ns, PQFP-208 | Intel/Altera
Brand: Altera
SKU: EPM9560WC208-20
Price: 25.8 USD
Availability: InStock

Référence : EPM9560WC208-20 ✗ Fin de vie

En stock Expédié sous 1 à 3 jours ouvrés

5 V (typical, see datasheet) Vdss PQFP-208 (RQFP/WQFP) Package

À partir de $25.8 USD / unité

MOQ : 1 |

Prix mis à jour : 2026-09-13

Tarifs dégressifs

Qté	Prix unitaire	Total
1	$42.5	$42,50
10	$38.2	$382,00
100	$33.95	$3 395,00
500	$29.4	$14 700,00
1 000	$25.8	$25 800,00

ℹ️ Tous les prix sont en USD

Voir la fiche technique (PDF) Voir les alternatives

Quantité

EPM9560WC208-20 Présentation

The Intel (formerly Altera) EPM9560WC208-20 is a high-density electrically-erasable programmable logic device (EPLD) from the MAX 9000 family, delivering 560 macrocells organized in 35 logic array blocks (LABs) in a 208-pin power quad flat pack (PQFP/RQFP) package. The device is a CMOS, in-system-programmable complex PLD with a maximum propagation delay of approximately 23.6 ns (the “-20” speed grade) and supports operation with both 3.3 V and 5 V I/O signaling for flexible mixed-voltage system design.

A CPLD (Complex Programmable Logic Device) is a non-volatile reconfigurable digital IC built from an array of AND/OR macrocell structures backed by EEPROM or flash memory; it occupies the design hierarchy between simple PLDs (PAL/GAL) and FPGAs, providing deterministic timing, fast I/O response, and instant-on behavior without external boot memory. Within Altera’s MAX 9000 family the EPM9560 sits at the top of the 9000 series density range, with 149 usable I/O pins and a programmable interconnect that makes it well suited to bus decoding, address mapping, glue-logic and state-machine replacement in industrial and telecom systems.

Key features of the EPM9560WC208-20 include 560 macrocells, 35 LABs, 149 user I/O pins, JTAG-based in-system programmability via the IEEE 1149.1 boundary-scan test (BST) interface, dual 3.3 V/5 V I/O capability, and a programmable register/feedback architecture. The “W” suffix designates the power PQFP package with enhanced thermal characteristics for high-density designs, and the “-20” designator indicates a 23.6 ns pin-to-pin logic delay suitable for systems clocked up to roughly 40 MHz on combinational paths.

Architecturally the device uses an EEPROM-based macrocell with individually programmable product-term steering, D/T/JK flip-flops, and a global interconnect matrix that delivers predictable, deterministic timing independent of routing density. This makes timing closure straightforward for address decoding, interrupt steering, and synchronous state-machine designs where FPGAs would add unnecessary silicon cost and configuration overhead.

Typical applications include high-density bus and address decoding in microprocessor/microcontroller systems, peripheral interface glue logic (e.g., PCI/ISA bus bridges), state-machine and sequencer replacement, industrial control logic, telecom backplane glue logic, and JTAG-driven system monitoring. The 149 I/O pins allow large pin-count designs to be consolidated into a single PLD.

When designing with this device, always observe the maximum I/O count (149), respect the dual-voltage VCCIO/VCCINT power sequencing rules, and use the Quartus II or MAX+PLUS II toolchain for design entry, fitting, and JTAG programming. Decoupling caps (0.1 microfarad ceramic in parallel with 10 microfarad bulk) should be placed within 1 cm of each supply pin to maintain signal integrity during in-system programming cycles.

This page synthesizes distributor pricing, parameter-correct drop-in alternatives from the same MAX 9000 family, and practical design notes drawn from Altera application notes and reference designs, content not consolidated on any single distributor page.

Alternatives de remplacement direct pour EPM9560WC208-20 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec EPM9560WC208-20 (même facteur de forme et même empreinte) — différant par Package, Device Type, Process Technology, Operating Temperature Grade, RoHS Status.

EPM9560RC208-20

Intel

Package: 208-pin RQFP (28x28 mm)