H5AN8G6NAFR-RDC - 8Gb DDR4 SDRAM 512Mx16 | SK Hynix
部品番号: H5AN8G6NAFR-RDC ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $4.2 | $4.20 |
| 10 | $3.9 | $39.00 |
| 100 | $3.55 | $355.00 |
| 500 | $3.3 | $1,650.00 |
| 1,000 | $3.05 | $3,050.00 |
H5AN8G6NAFR-RDC 概要
DDR4 SDRAM is the fourth generation of double-data-rate synchronous dynamic random-access memory, the dominant main-memory technology in servers, workstations, desktop PCs, and embedded systems. As a memory IC within the DRAM hierarchy, it synchronizes all operations to a clock and transfers data on both clock edges, doubling effective bandwidth versus SDR DRAM. DDR4 raised the bank-group architecture, lowered operating voltage from 1.5V (DDR3) to 1.2V, and increased prefetched data per access to 8n.
Key features of this device include 8Gb density in a single die, a 16-bit wide data bus, multi-bank page burst access mode, and DDR4 bank-group architecture that improves effective bandwidth at a given clock rate. The 1.2V core supply significantly reduces memory-subsystem power compared with DDR3 solutions, which matters in density-critical modules and battery-operated equipment.
Architecturally, the H5AN8G6NAFR family uses CMOS DRAM core technology with DDR4 signaling, on-die termination support, and a JEDEC-standard DDR4 interface. The -RDC speed grade suffix identifies the speed bin and temperature-range configuration of this variant; consult the SK Hynix datasheet for the exact clock-rate and timing parameters of the -RDC bin.
Typical applications include main memory for industrial PCs and embedded controllers, DRAM memory modules (SO-DIMM/DIMM component population), networking equipment buffers, and high-capacity storage caching systems. The x16 organization suits designs that need moderate bus widths with high per-device density.
Design consideration: DDR4 routing requires length-matched, impedance-controlled fly-by or tree topologies; verify the controller supports x16 devices and the -RDC speed grade before layout.
This page synthesizes datasheet data, distributor listings, and verified drop-in alternatives not consolidated in the manufacturer datasheet.
ドロップイン代替品: H5AN8G6NAFR-RDC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: H5AN8G6NAFR-RDC （同一形状・フットプリント） — 相違点: Package, Interface, RoHS Status, Organization, Density.
クイック比較ツール — 並列比較する代替部品を選択:
H5AN8G6NAFR-UHC
✅ ドロップイン✓ 在庫あり
$5.7422 / 個
データシートを見る →H5AN8G6NAFR-VKC
✅ ドロップイン✓ 在庫あり
$6.25 / 個
データシートを見る →H5AN8G6NAFR-PBC
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$3.55 / 個
データシートを見る →H5AN8G8NAFR-RDC
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$2.95 / 個
データシートを見る →MT40A512M16JY-075E
✅ ドロップイン✓ 在庫あり
$30.5 / 個
データシートを見る →H5AN8G6NAFR-RDC 最大定格＆電気的特性
| メモリタイプ | DDR4 SDRAM |
| Memory Density | 8 Gb |
| メモリ構成 | 512M x 16 |
| 電源電圧 | 1.2 V |
| インターフェース | DDR4 (JEDEC-standard) |
| Access Mode | Multi Bank Page Burst |
| Package Code | TFBGA |
| Package Shape | Rectangular |
| Number of Terminals | 96 |
| 実装タイプ | Surface Mount |
| Temperature Grade | OTHER (per Partstack listing) |
| Technology | CMOS |
| RoHS ステータス | Compliant (Lead-Free & Halogen-Free) |
| Speed Grade | -RDC (see datasheet for bin timing) |
| Family | H5AN8G4NAFR-xxC / H5AN8G8NAFR-xxC / H5AN8G6NAFR-xxC |
H5AN8G6NAFR-RDC rectangular ピン配置ガイド
H5AN8G6NAFR-RDC (rectangular パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: H5AN8G6NAFR-RDC.
詳細は データシート をご参照ください。
主な用途
H5AN8G6NAFR-RDC の用途: 6 件s: Embedded Industrial PC Main Memory, DRAM Memory Modules (DIMM/SO-DIMM), Networking Equipment Packet Buffering, Automotive and Rugged Embedded Systems, Test and Measurement Instrumentation, Storage Systems and Caching.
Embedded Industrial PC Main Memory
The H5AN8G6NAFR-RDC provides 8Gb of DDR4 main memory in a single 96-ball TFBGA component, which suits industrial PC motherboards and COM Express modules that need high density without a large component count. Its 512M x 16 organization pairs naturally with x16 DDR4 controllers in embedded chipsets, and the 1.2V supply keeps memory power within typical industrial thermal budgets. Mounted on the PCB directly rather than on a module, the device eliminates SO-DIMM connector cost and improves shock and vibration tolerance for factory automation and edge-compute deployments. Designers should follow SK Hynix's DDR4 routing guidance for fly-by command/address topology and length matching.
おすすめ
DRAM Memory Modules (DIMM/SO-DIMM)
The H5AN8G6NAFR-xxC family is used as a component population on DDR4 DIMMs and SO-DIMMs, where 16 x8 or x16 devices build 8 GB to 16 GB capacities. According to the SK Hynix datasheet, the family targets main-memory applications requiring large density and high bandwidth - exactly the module use case. The multi-bank page burst access mode sustains the sequential and random bandwidth that module controllers expect, and the 1.2V operation aligns with the JEDEC DDR4 module power budget. x16 parts like this one enable lower-chip-count module designs for cost-sensitive and space-constrained SODIMM form factors.
おすすめ
Networking Equipment Packet Buffering
Routers, switches, and network appliances use 8Gb x16 DDR4 components like the H5AN8G6NAFR-RDC as deep packet buffers and table memory behind traffic-processing ASICs. The device's multi-bank page burst architecture supports the high sequential bandwidth needed when draining packet bursts, while 8Gb on one component keeps the buffer subsystem compact on dense line cards. Its 1.2V operation reduces power on cards where every watt matters for airflow-limited chassis. The RoHS-compliant, lead-free and halogen-free construction also meets telecom environmental requirements for network equipment deployed in regulated markets.
おすすめ
Automotive and Rugged Embedded Systems
Infotainment head units, gateways, and rugged controllers use 8Gb DDR4 components to host large operating-system images and frame buffers. The H5AN8G6NAFR-RDC's TFBGA-96 package provides a low-profile, solder-attached solution that withstands vibration better than socketed memory, and its 1.2V DDR4 interface integrates with automotive-grade SoCs that expose DDR4 controllers. Designers should confirm the -RDC temperature grade against their cabin or under-hood environment, or select an appropriate SK Hynix temperature-suffix variant within the same H5AN8G6NAFR-xxC family, since the package footprint is shared across the family.
おすすめ
Test and Measurement Instrumentation
Oscilloscopes, logic analyzers, and protocol analyzers rely on deep capture memory to record long signal histories. The H5AN8G6NAFR-RDC's 8Gb density in a single component lets instrument designers build multi-gigabyte capture buffers with fewer parts, and its 512M x 16 organization supports the wide, high-throughput data paths between front-end acquisition ASICs and buffer memory. The multi-bank page burst access mode sustains sustained streaming write bandwidth during acquisition and read bandwidth during playback analysis. RoHS-compliant construction supports environmental regulations that commercial test equipment must meet in global markets.
おすすめ
Storage Systems and Caching
SSD controllers and enterprise storage arrays use DDR4 DRAM as firmware memory, mapping tables, and write caches. The H5AN8G6NAFR-RDC offers 8Gb of cache memory in one 96-ball TFBGA component, allowing 2 GB of DRAM per four devices - enough for enterprise FTL tables on multi-terabyte SSDs. Its 1.2V supply keeps controller-board power within SSD thermal limits, and the compact rectangular package fits alongside NAND dies on constrained PCBs. The multi-bank page burst mode supports the small random read/write patterns typical of FTL table lookups during host I/O processing.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: H5AN8G6NAFR-RDC — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | H5AN8G6NAFR-UHC | H5AN8G6NAFR-VKC | H5AN8G6NAFR-PBC | H5AN8G8NAFR-RDC | MT40A512M16JY-075E |
|---|---|---|---|---|---|---|
| Package | TFBGA-96 | TFBGA-96 - same | TFBGA-96 - same | TFBGA-96 - same | TFBGA-96 - same | FBGA-96 - same footprint |
| Brand | SK Hynix | SK Hynix | SK Hynix | SK Hynix | SK Hynix | Micron Technology |
| Density | 8 Gb | 8 Gb | 8 Gb | 8 Gb | 8 Gb | 8 Gb |
| Organization | 512M x 16 | 512M x 16 | 512M x 16 | 512M x 16 | 1G x 8 | 512M x 16 |
| Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Memory Type | DDR4 SDRAM | DDR4 SDRAM | DDR4 SDRAM | DDR4 SDRAM | DDR4 SDRAM | DDR4 SDRAM |
| Speed Grade | -RDC | -UHC | -VKC (2400 Mbps class) | -PBC | -RDC | -075E (1875 Mbps class) |
主な差別化要因
- Native -RDC speed-bin qualification （vs H5AN8G6NAFR-UHC)
- x16 organization reduces component count （vs H5AN8G8NAFR-RDC)
- Second-source availability in the same footprint （vs MT40A512M16JY-075E)
設計ノート
DDR4 x16 designs with the H5AN8G6NAFR-RDC should use length-matched routing: keep DQ/DM/DQS trace skew within controller spec (typically +/-10 ps intra-byte), and route command/address in fly-by topology with VTT termination at the end of the chain. Maintain controlled impedance (40 ohm single-ended, 80 ohm differential for DQS pairs) and reference signals to solid ground planes. Follow the controller vendor's DDR4 layout guide in addition to the SK Hynix datasheet routing recommendations.
The device operates from a 1.2V VDD core; provide bulk capacitance (e.g., several 10 uF ceramics per device) plus 0.1 uF high-frequency decoupling at each VDD ball pair, and a separate VTT rail terminated per the DDR4 termination spec for address/control lines. Verify power-up sequencing per the SK Hynix datasheet before releasing the memory controller reset - DDR4 initialization must complete before any command is issued or the state machine may lock up.
The -RDC suffix encodes the speed bin; do not assume it matches -UHC or -VKC timing tables. If substituting H5AN8G6NAFR-UHC/VKC/PBC or Micron MT40A512M16JY-075E, re-run memory training/calibration on the target board and confirm the controller supports the new bin's data rate. Also note H5AN8G8NAFR-RDC is x8 organization - it shares the package footprint but not the bus width, so controller configuration must change.
コンプライアンス情報
Datasheet description states Lead-Free & Halogen-Free (RoHS Compliant). REACH and conflict-minerals declarations not stated in provided data.
