집적 회로

하위 카테고리

📁 ADC/DAC 3,100+ 제품 📁 증폭기 IC 1,900+ 제품 📁 오디오 코덱 18 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 660+ 제품 📁 Comparator ICs 1 제품 📁 DSP 1,100+ 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 7,300+ 제품 📁 인터페이스 IC 3,300+ 제품 📁 LED 드라이버 1 제품 📁 로직 IC 460+ 제품 📁 메모리 IC 870+ 제품 📁 마이크로컨트롤러 20,000+ 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 14 제품

제품 (39,000+)

EP2A70B724C9 - APEX II 540 I/O 724-BGA FPGA | Altera / Intel
EP2A70B724C9

EP2A70B724C9 - APEX II 540 I/O 724-BGA FPGA | Altera / Intel

The Intel / Altera EP2A70B724C9 is a member of the APEX II Field-Programmable Gate Array family, delivering 67,200 logic elements backed by 1,146,880 bits of embedded memory and 540 user I/Os in a 724-ball FineLine BGA package. Built on a 0.15-micrometer all-layer copper process with up to eight metal layers, it integrates up to eight LVDS channels operating at 1 Gbps and offers True-LVDS, LVPECL, PCML, and HyperTransport-compatible I/O standards. The 'C9' speed grade denotes the commercial temperature range (0C to +85C) and the 9th-order speed bin for this family. The 'B724' suffix confirms the 724-ball FineLine BGA footprint, while the package name on the part is listed as 724-BBGA, FCBGA. An FPGA (Field-Programmable Gate Array) is a programmable logic device (PLD) that combines the flexibility of software-based design with near-ASIC performance and parallelism. APEX II sits in the hierarchy of programmable logic: PLD -> CPLD/FPGA family -> high-density SRAM-based FPGA -> multi-gigabit transceiver-capable device. APEX II was engineered for high-bandwidth DSP, datapath-intensive designs, and on-chip memory-rich applications requiring up to 1.146 Mbits of embedded system block (ESB) RAM and PLLs for clock management. Key features include embedded RAM blocks (ESBs) configurable as true dual-port, simple dual-port, or single-port synchronous memory, with self-timed write enable that eliminates external WE signal generation. The device supports up to four PLLs for clock multiplication, division, and phase shifting, and offers true 1 Gbps LVDS I/O for chip-to-chip interconnect. The 540 user I/Os include dedicated high-speed channels suitable for HyperTransport, RapidIO, and LVDS signalling, making APEX II well suited to high-throughput bridging and protocol conversion designs. The architecture combines Look-Up Table (LUT)-based logic with ESB memory, allowing designers to trade logic capacity against memory capacity per design block. Multi-level interconnect with fast row and column paths targets DSP and datapath workloads where sustained arithmetic throughput matters more than raw clock rate. FineLine BGA packaging supports dense board layouts while preserving signal integrity for the high-speed LVDS channels, which require matched impedance routing and careful length matching. Typical applications include high-speed serial protocol bridging (RapidIO, HyperTransport, custom LVDS links), DSP co-processing for wireless baseband or video pipelines, datapath acceleration in telecom line cards, and high-density glue logic with embedded memory buffering. The wide I/O count also suits it for memory-controller fanout and large bus-conversion designs where many parallel interfaces must be aggregated. When designing with this device, ensure proper LVDS signal integrity with controlled-impedance routing and matched-length traces; verify JTAG chain integrity in production programming; and follow Altera's power estimation flow using the Quartus APEX II power calculator before sign-off. Synchronous RAM blocks require careful clock-domain crossing analysis when shared with asynchronous logic. This page synthesizes distributor pricing for EP2A70B724C9, same-family drop-in alternatives within the APEX II lineup, and practical design notes beyond what the manufacturer datasheet alone provides.

견적 요청 문의하기
EP2A70B724C9ES - APEX II FPGA 3M Gates 67200 Cells 724-FCBGA | Intel
EP2A70B724C9ES

EP2A70B724C9ES - APEX II FPGA 3M Gates 67200 Cells 724-FCBGA | Intel

The Intel (formerly Altera) EP2A70B724C9ES is a high-density APEX II family Field Programmable Gate Array (FPGA) with 3 million system gates, 67,200 logic elements, and 1,146,880 bits of embedded memory, housed in a 724-pin flip-chip BGA (FCBGA) package. It is built on a 0.15 µm CMOS process, operates from a 1.5 V core supply, and delivers up to 198 MHz internal performance, with 540 user I/O pins supporting multiple I/O standards including LVTTL, LVCMOS, SSTL, HSTL, PCI, and LVDS. An FPGA (Field Programmable Gate Array) is a type of programmable logic device (PLD) that combines the architecture of gate arrays with the programmability of logic cells. Within the broader semiconductor taxonomy, FPGAs sit alongside CPLDs, microcontrollers, and ASICs as reconfigurable computing fabrics used to implement custom digital logic, glue logic, signal processing, and hardware-accelerated functions. APEX II belongs to Intel's (Altera's) mid-2000s high-density family targeting communications, video, and DSP designs, and was later succeeded by Stratix and Cyclone families. Key features include 540 user I/O pins, 1,146,880 bits of embedded SRAM, built-in PLLs for clock management, and multi-voltage I/O support allowing 1.5V, 1.8V, 2.5V, and 3.3V interface to external memory and bus devices. The device integrates dedicated multiplier blocks, True-LVDS support, and a high-speed embedded array for DSP and communications pipelines. With 3M system gates and 198 MHz performance, the EP2A70B724C9ES was the flagship of the APEX II line for high-bandwidth parallel processing tasks. The architecture uses a MultiCore interconnect with embedded memory blocks distributed across the die, providing predictable timing closure for wide data-path designs. The 724-pin FCBGA package supports hundreds of general-purpose and high-speed serial pins and is intended for high-density, high-performance PCB designs with controlled-impedance routing and matched-length differential pairs. Compared with later FPGA generations, APEX II lacks hard processor cores, transceivers, and DSP blocks, but its parallel fine-grained logic fabric remains useful for legacy designs and replacement applications. Typical applications include telecommunications baseband processing, high-speed video bridging and image processing, network switches and routers, PCI/PCI-X bridge logic, custom DSP pipelines, and industrial control systems. It is also used in legacy test equipment and aerospace/defense subsystems where long lifecycle and pin-compatible replacement are required. The wide operating temperature range and 540 I/O make it suitable for board-level integration with multiple memory and bus devices. When designing with EP2A70B724C9ES, ensure the PCB has a 1.5V core regulator with adequate decoupling, configure I/O banks according to the Quartus design tool, and follow Intel's layout guidelines for FCBGA packages including microvia stacks, signal-integrity-aware stackup design, and thermal management. Note that APEX II is in production for legacy/long-lifecycle customers and lead times may be longer than for current-generation FPGAs. This page synthesizes distributor pricing, drop-in APEX II and APEX-family alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers shorten selection time and qualify second-source parts.

견적 요청 문의하기
EP2A70B724C9N - APEX II 70K FPGA, 724-FCBGA | Intel / Altera
EP2A70B724C9N

EP2A70B724C9N - APEX II 70K FPGA, 724-FCBGA | Intel / Altera

The Intel (formerly Altera) EP2A70B724C9N is a high-density APEX II family Field Programmable Gate Array (FPGA) delivering approximately 3 million system gates and 67,200 logic elements, housed in a 724-pin FCBGA package. Built on a 0.15 µm CMOS process, the device operates from a nominal 1.5 V core supply (1.425 V–1.575 V) with maximum internal clock frequencies up to 198 MHz, and provides up to 536 user I/O lines for high-bandwidth parallel interfacing. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit composed of configurable logic blocks (CLBs), programmable interconnect, and I/O cells that can be re-programmed to implement arbitrary digital logic functions. FPGAs sit in the digital IC hierarchy as: FPGA -> Programmable Logic Device (PLD) -> Logic IC -> Integrated Circuit -> Semiconductor. The APEX II family targets high-performance, multi-gate designs such as telecommunication infrastructure, high-speed datapath processing, and ASIC prototyping, bridging the gap between mid-range CPLDs and full custom ASICs. Key features include 3 M system gates, 67,200 logic cells, embedded memory blocks, four phase-locked loops (PLLs) for clock management, multi-standard I/O support including LVDS, and 198 MHz internal operation. The 0.15 µm process technology reduces die size while delivering low static power, and the FCBGA-724 package offers a thermal-resistance advantage suitable for high-utilization designs. Each APEX II device is built around Look-Up Table (LUT)-based logic elements combined with a hierarchical interconnect fabric optimized for predictable timing closure. The architecture combines LUT-based logic elements, embedded system blocks (ESBs) for RAM/ROM, fast interconnect, and on-chip PLLs for clock synthesis. This combination enables designers to absorb entire subsystems — including memory controllers, datapath engines, and bus interfaces — into a single device, eliminating the need for multiple CPLDs or ASIC gates. The 3 M system-gate rating positions the EP2A70 well above mid-range FPGAs in capacity and below high-end Stratix-class devices. Typical applications include telecommunications line cards, ASIC prototyping, high-speed image processing pipelines, network switches/routers, and DSP co-processing. The 724-pin FCBGA package supports dense I/O layouts required by parallel bus architectures and high-pin-count memory interfaces. APEX II devices are commonly deployed in designs migrated from APEX 20KE families where higher logic density or extended I/O is needed. When designing with this part, ensure robust 1.5 V core power decoupling with low-ESR ceramic capacitors placed adjacent to every VCC/VCCIO pin pair. The FCBGA-724 package requires controlled-impedance PCB stack-up and microvia technology; reflow profile must respect the 724-ball mass and the moisture sensitivity level (MSL) preconditioning. Signal integrity at 198 MHz operation demands matched-length routing and proper termination on LVDS pairs. This page synthesizes distributor pricing, drop-in alternatives from the same APEX II family, and practical design notes not found in the manufacturer datasheet, helping engineers select, source, and integrate the EP2A70B724C9N efficiently.

견적 요청 문의하기
EP2A70B724I-7 - 70k LE APEX II FPGA, BGA-724, Industrial | Intel
EP2A70B724I-7

EP2A70B724I-7 - 70k LE APEX II FPGA, BGA-724, Industrial | Intel

The Intel (formerly Altera) EP2A70B724I-7 is a member of the APEX II family of field-programmable gate arrays (FPGAs), housed in a 724-pin BGA package and rated for the industrial temperature range. The APEX II architecture combines look-up table (LUT)-based logic elements, embedded system blocks (ESBs) for memory and arithmetic, and high-speed I/O, positioning the family between traditional gate arrays and complex programmable logic devices. The EP2A70 variant denotes the largest device in the family with approximately 70,000 logic elements, targeting high-density data-path and datapath-intensive designs. The APEX II family occupies the programmable logic device category in the broader semiconductor hierarchy: FPGA -> programmable logic -> logic IC -> integrated circuit -> semiconductor. APEX II FPGAs are fabricated on a sub-micron CMOS process and offer multi-voltage I/O standards including LVTTL, LVCMOS, PCI, SSTL, and GTL+, enabling direct interfacing with a wide range of memory and bus standards without external translators. Each embedded system block provides dual-port RAM, ROM, product-term logic, and dedicated arithmetic chains, allowing the same silicon to implement FIFOs, CAMs, multipliers, and registered memories. Key features of the EP2A70B724I-7 include approximately 70,000 logic elements (per family marketing), 156,000 to 220,000 typical system gates depending on configuration, multiple embedded system blocks, multi-standard I/O support, and in-system programmability through the IEEE 1149.1 (JTAG) interface or passive/active serial configuration. The "I-7" suffix denotes the industrial temperature grade and a speed grade of -7. The BGA-724 package provides the pin density required to expose the full I/O and supply the power-distribution network needed for the device's logic capacity. Typical applications include high-speed telecommunications line cards, network switches and routers, RAID controllers, channel cards for storage area networks, DSP co-processing, and glue logic for complex processor subsystems. The 724-ball BGA package supports high pin-count board layouts where the large logic and memory resources of the device are fully utilized. When designing with this device, ensure the PCB has a minimum of six PCB layers with dedicated power and ground planes to maintain signal integrity for the LVTTL/LVCMOS and SSTL I/O. Provide a JTAG header for in-system programming and boundary-scan test, and follow the Altera configuration device datasheet for selecting compatible EPC4, EPC8, or EPC16 configuration memories when using passive or active serial modes. This page synthesizes distributor pricing, FPGA family alternatives, and APEX II design considerations not found in the original datasheet, giving engineers an integrated view of availability, footprint compatibility, and supply-chain options for legacy Altera FPGA designs.

견적 요청 문의하기
EP2A70B724I-8 - APEX II FPGA, 67.2K Cells, 724-BGA | Altera
EP2A70B724I-8

EP2A70B724I-8 - APEX II FPGA, 67.2K Cells, 724-BGA | Altera

The Altera (now Intel) EP2A70B724I-8 is a member of the APEX II family of Field-Programmable Gate Arrays (FPGAs), offering 67,200 logic cells backed by 3 million system gates in a 0.15 µm CMOS process. The device operates from a 1.5 V core supply, integrates high-speed LVDS-capable I/O, and is delivered in a 724-pin FCBGA package with industrial temperature grade (-40 °C to +100 °C ambient) and a peak reflow rating of 220 °C. Key features of the APEX II architecture include MultiCore interconnect with embedded array blocks (EABs) for fast on-chip memory, a hierarchical Look-Up Table (LUT) fabric supporting 4-input LUTs, embedded multiplier support via dedicated DSP rows, and four phase-locked loops (PLLs) for clock multiplication and deskew. The family supports up to 281 MHz internal operation and is built around the LUT-based logic element combined with embedded system blocks, which combine SRAM and dedicated logic for efficient data-path implementation. From a system-architecture perspective, FPGAs occupy a distinct tier in programmable logic: they sit above standard Complex Programmable Logic Devices (CPLDs) in capacity and below Application-Specific Integrated Circuits (ASICs) in per-unit cost, while offering parallel hardware fabrics that can be reconfigured after PCB assembly. The APEX II family targets high-density data-path applications such as telecommunications backplanes, parallel DSP, and high-speed bus bridging, where a designer needs ASIC-class throughput without NRE tooling costs. Typical applications for the EP2A70B724I-8 include communications infrastructure (SONET/SDH framer ICs, ATM switching fabrics, 10/40 Gb Ethernet packet processors), high-performance DSP (FIR filters, FFT engines, baseband modem processing), and ASIC prototyping/emulation platforms. The 724-pin FCBGA package exposes roughly 380 user I/O pins, sufficient for wide parallel buses such as 64-bit SDRAM interfaces or multi-channel LVDS links. When designing with this part, pay particular attention to multi-rail decoupling: the 1.5 V core, 3.3 V I/O bank supplies, and PLL analog supply must each be filtered with low-impedance ceramic capacitors placed within 5 mm of their respective pins. Configuration via JTAG or passive serial should be planned against the board's boot-time budget because the configuration image for a 70K-cell device typically exceeds 1 Mbit. This page synthesizes distributor availability, same-family APEX II alternatives, and practical PCB design notes not found in a single Altera datasheet chapter. Engineers evaluating EP2A70B724I-8 for legacy or long-lifecycle programs should review the lifecycle status carefully before committing to new board designs.

견적 요청 문의하기
EP2A70B724I-9 - APEX II FPGA 70K LE, BGA-724, -9 Speed | Altera / Intel
EP2A70B724I-9

EP2A70B724I-9 - APEX II FPGA 70K LE, BGA-724, -9 Speed | Altera / Intel

The Altera (Intel) EP2A70B724I-9 is a member of the APEX II family of Field-Programmable Gate Arrays (FPGAs) that delivers up to 70,000 typical logic elements and 4,290 Kbits of embedded RAM in a 724-pin BGA package with -9 speed grade and industrial temperature rating. As part of the APEX II series, it integrates LUT-based logic, embedded memory blocks, and a MultiCore interconnect that supports high-performance data-pipeline designs. The -9 speed grade designates one of the faster bin positions in the APEX II family, providing higher Fmax than -10 (slower) grades at typical process corners. APEX II (Advanced Programmable Element Matrix II) is Altera's second-generation MultiCore architecture FPGAs that combine look-up-table (LUT) logic, embedded system blocks (ESBs) for memory, and a hierarchical row/column interconnect for predictable timing closure. They are positioned in Altera's product hierarchy as APEX II -> APEX family -> SRAM-based programmable logic -> FPGA -> programmable logic device -> semiconductor. APEX II devices were widely adopted in high-density glue logic, data-path processing, and pre-SOC prototyping designs of the late 1990s and early 2000s. Key features include high-density fine-grained logic with 70K typical LEs, 4,290 Kbits of embedded system block (ESB) memory for distributed RAM and FIFO applications, and the MultiCore interconnect that provides predictable row-and-column based routing. The -9 speed grade targets higher clock-frequency designs versus the slower -10 bin. The 'I' suffix designates the industrial temperature range (-40C to +100C operating), making it suitable for harsh-environment deployments. The BGA-724 package with 1.27 mm pitch is the largest in the APEX II family and supports maximum user I/O for dense interconnect. Typical applications include high-performance data-path processing, telecom protocol engines, network switch fabric, and legacy high-density glue-logic replacement. The large embedded memory count makes it suitable for FIFO-intensive designs such as ATM/SDH framers and base-station channel cards. APEX II devices retain an installed base in industrial control and military/aerospace systems where long lifecycle support and ITAR/legacy compatibility matter more than raw modern Fmax. When designing with the EP2A70B724I-9, engineers must use the legacy Altera Quartus II design tool (versions 4.x-9.x recommended) since later Quartus versions dropped APEX II device support after Altera's 2010+ portfolio refresh. Configuration requires an EPC4, EPC8, or EPC16 enhanced configuration device or a passive serial/PROM-based boot. Decoupling guidelines call for at least 12 bulk + 24 high-frequency capacitors distributed around the BGA power pins to control simultaneous switching noise.

견적 요청 문의하기
EP2A70B724I7 - APEX II FPGA 3M Gates 67200 Cells 420MHz 1.5V 724-FCBGA | Intel
EP2A70B724I7

EP2A70B724I7 - APEX II FPGA 3M Gates 67200 Cells 420MHz 1.5V 724-FCBGA | Intel

The Intel EP2A70B724I7 is a high-density FPGA from the APEX II family, integrating 3 million system gates and 67200 logic elements in a 724-pin FineLine BGA (FCBGA) package. It is fabricated on a 0.15 um CMOS process, operates from a 1.5 V core supply, and is specified for the industrial temperature range. The device includes an embedded MultiCore interconnect, up to 4 PLL blocks, and dedicated True-LVDS circuitry, supporting high-speed serial and parallel I/O up to 420 MHz. An FPGA (Field-Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnects, and I/O cells, all of which can be re-programmed after manufacture. APEX II belongs to the broader hierarchy of programmable logic devices (PLDs), sitting between traditional CPLDs (Complex Programmable Logic Devices) and modern SoC FPGAs. The 3 M-gate class places EP2A70B724I7 in the high-density tier, alongside DSP and embedded-processor cores, typically used for data-path and bus-interface glue logic. Key features include 67200 logic elements, approximately 429 Kbits of embedded system memory (ESBs), 4 PLLs, 8 True-LVDS channels, multi-voltage I/O support (1.5 V, 1.8 V, 2.5 V, 3.3 V) on a per-bank basis, and JTAG-based in-system programmability via IEEE 1149.1 (Boundary-Scan) and IEEE 1532 (ISP). The 724-pin FCBGA package exposes the maximum I/O count of the family, enabling wide parallel buses and high-pin-count ASIC replacement designs. The architecture combines a MultiCore array, look-up-table-based logic elements, fast row/column interconnect, and embedded memory blocks. The 0.15 um process and 1.5 V VCCINT minimize dynamic power, while the True-LVDS interface delivers source-synchronous signaling for video, telecom, and backplane applications up to 840 Mbps per channel. Typical applications include high-speed communications backplanes, ASIC prototyping, video broadcast equipment, military and aerospace signal processing, and industrial control systems. The wide I/O count also makes it a frequent choice for legacy PCI, RapidIO, and custom parallel bus bridges. The industrial temperature grade (-40 C to +100 C case) supports deployment in harsher environments than commercial-grade FPGAs. When designing with EP2A70B724I7, follow Intel/Altera APEX II layout guidelines: provide solid VCCINT and VCCIO planes with low-ESR decoupling placed within 5 mm of every supply pin, and respect the simultaneous-switching-output (SSO) limits in the family datasheet. This device is mature (introduced circa 2002) and is now typically sourced through distributors stocking obsolete or last-time-buy inventory; design teams should plan a long-term supply path or pin-compatible migration to APEX 20K/Stratix families. This page synthesizes distributor availability, parametric equivalents, and APEX II design guidance not bundled in the legacy datasheet, helping engineers evaluate lifecycle risk and migration options in a single view.

견적 요청 문의하기
EP2A70B724I7N - APEX II 3M Gates 67200 Cells FPGA | Intel
EP2A70B724I7N

EP2A70B724I7N - APEX II 3M Gates 67200 Cells FPGA | Intel

The Intel (formerly Altera) EP2A70B724I7N is a high-density programmable logic device from the APEX II family, integrating 3 million system gates and 67,200 logic elements in a 724-pin FCBGA package. Built on a 0.15 um CMOS process, it operates from a 1.5 V core supply and supports system frequencies up to 420 MHz, making it suitable for high-performance parallel processing, telecom line cards, and DSP-intensive designs. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing an array of configurable logic blocks (CLBs), embedded memory, DSP blocks, and programmable interconnect that the engineer can reconfigure after manufacturing. FPGAs sit in the broader hierarchy of programmable logic devices (PLDs) alongside CPLDs, and offer higher logic density, embedded multipliers, and high-speed serial transceivers. APEX II is positioned within Intel/Altera's high-density, pre-Stratix family aimed at data-path and DSP applications. Key features of the EP2A70B724I7N include 67,200 logic elements, embedded system gates of 3 million, embedded memory of approximately 425 Kbytes, support for multiple I/O standards including LVDS, PCI-X, HSTL, and SSTL, and 16 high-speed clock networks with up to 420 MHz internal performance. The device supports in-system programmability via passive serial, passive parallel, and JTAG configuration modes, and provides built-in boundary-scan test. Architecturally, the APEX II device combines a MultiCore architecture with embedded Look-Up Tables (LUTs), Embedded System Blocks (ESBs) for memory, and dedicated carry chains for arithmetic. Its 0.15 um process and 1.5 V VCCINT deliver a balance of speed and power, and the 724-pin FCBGA package provides 536 user I/O pins distributed across multiple I/O banks supporting mixed-voltage signaling. Typical applications include telecom line-card interfaces, high-speed packet processing, DSP co-processing for imaging and video, military/aerospace signal processing, and ASIC prototyping where high gate count and predictable timing closure are required. When designing with this device, ensure proper power sequencing on VCCINT (1.5 V) and VCCIO bank supplies, and use the Altera Quartus II design tool (or its later successors) for synthesis, place-and-route, and timing analysis. Decoupling and ground-plane design must follow FCBGA layout guidelines. This page synthesizes pricing, drop-in alternatives, and practical design considerations specific to the EP2A70B724I7N, providing engineering value beyond the manufacturer datasheet summary.

견적 요청 문의하기
EP2A70B724I8 - APEX II 70K LE FPGA 724-FCBGA | Altera
EP2A70B724I8

EP2A70B724I8 - APEX II 70K LE FPGA 724-FCBGA | Altera

The Intel (formerly Altera) EP2A70B724I8 is a member of the APEX II family of programmable logic devices, providing up to 67200 logic elements (LEs), 3 million system gates, and a 0.15 µm CMOS process with a 1.5 V core supply. It is packaged in a 724-pin FineLine BGA (FCBGA) and operates across the industrial temperature range (-40 °C to +100 °C), as indicated by the trailing "I" suffix. The "8" speed grade corresponds to an internal performance index targeting roughly 281 MHz in typical data-path designs. An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit built around a matrix of configurable logic blocks (CLBs), embedded memory blocks, and programmable interconnect that can be reconfigured by the customer after manufacture. APEX II devices sit in the high-density, multi-standard I/O tier of the Altera product tree: FPGA -> programmable logic -> programmable logic IC -> semiconductor. Each LE is paired with a four-input lookup table, a programmable register, and dedicated carry chain logic, while embedded system blocks (ESBs) implement dual-port RAM, ROM, and CAM. The combination makes APEX II suitable for bus interfaces, on-chip datapaths, and glue-logic consolidation. Key features of the EP2A70B724I8 include 67200 LEs, 3 M system gates, embedded multiplier support, True-LVDS and high-speed I/O standards, and a dedicated phase-locked loop (PLL) block for clock multiplication and deskew. The device supports active serial, passive serial, and passive parallel asynchronous configuration modes through the EPC4/EPC8/EPC16 enhanced configuration devices, and in-system programmability via JTAG (IEEE 1149.1). Each I/O bank is independently powered, allowing mixed-voltage interfacing (1.5 V, 1.8 V, 2.5 V, 3.3 V) on the same die. The architecture is built on a 0.15 µm metal-layer CMOS process with eight layers of interconnect for low-skew global clock distribution. The embedded system block memory ranges to hundreds of kilobits and can be concatenated horizontally or vertically. TriMatrix memory supports per-bit write-masking and mixed-width data ports. The PLL block generates up to four derivative clocks with sub-100 ps jitter, while the MultiTrack interconnect minimizes routing congestion in dense designs. Typical applications include telecommunications line cards, high-speed serial protocol bridging (UTOPIA, SPI-4.2, POS-PHY), DSP co-processing front-ends, and industrial control backplanes. The wide LVDS I/O count makes it well suited to bus multiplexing and parallel-to-serial concentration tasks. When designing with this part, plan for a 1.5 V core supply, four PLL analog supplies (VCC_PLL pins), and careful bank voltage grouping; the 724-pin FCBGA requires a multilayer PCB with microvia fan-out. Use the Quartus II design software (legacy support) for synthesis, place-and-route, and timing closure; signal-integrity simulations should account for simultaneous switching noise on the 1.5 V rail. This page consolidates distributor stock, drop-in same-package alternatives, and practical design notes for engineers sourcing the EP2A70B724I8 outside of Avnet/Mouser long-term contracts.

견적 요청 문의하기
EP2A70B724I9 - APEX II FPGA 3M Gates 724-FCBGA | Altera
EP2A70B724I9

EP2A70B724I9 - APEX II FPGA 3M Gates 724-FCBGA | Altera

The Altera (Intel) EP2A70B724I9 is a member of the APEX II family of Field Programmable Gate Arrays, delivering approximately 3,000,000 system gates with 67,200 logic elements in a 724-pin FCBGA (Flip-Chip Ball Grid Array) package. Built on a 0.15 µm CMOS process, the device operates from a 1.5 V core supply and supports high-performance system-clock rates up to 198 MHz, with embedded system blocks that combine look-up tables, product-term logic, and dual-port RAM for high-throughput data-path applications. What is a FPGA? A Field-Programmable Gate Array (FPGA) is a semiconductor device whose logic fabric, routing, and I/O can be reconfigured by the end user after manufacture. FPGAs sit above general-purpose microcontrollers and below fixed-function ASICs in the programmable-logic taxonomy (FPGA -> programmable logic -> semiconductor IC), offering parallel processing, deterministic timing, and hardware-level customization for data-path acceleration, glue logic, and prototyping. The APEX II family specifically targets high-density, multi-standard I/O designs by integrating up to four embedded system blocks (ESBs) with each ESB providing up to 32 Kbits of dual-port RAM. Key features of the EP2A70B724I9 include 540 Kbits of embedded memory, 4 phase-locked loops (PLLs) for flexible clock management, support for multiple I/O standards including LVTTL, LVCMOS, SSTL, and HSTL, and an industrial operating temperature range. The 724-pin FCBGA package provides a high-density interconnect suitable for high-speed designs with numerous differential pairs and high pin-count I/O requirements. The EP2A70B724I9 architecture combines four-input look-up tables (LUTs) with embedded system blocks and high-speed interconnect, allowing designers to implement both register-rich datapaths and memory-intensive functions in a single device. The PLLs allow multiple clock-domain synthesis and zero-delay buffering for backplane or source-synchronous interfaces such as LVDS and SSTL. Typical applications include telecommunications infrastructure, network switching and routing equipment, high-speed serial backplanes, digital signal processing (DSP) pipelines, and ASIC prototyping. The high logic density and embedded memory make the EP2A70B724I9 well suited for datapath-heavy designs such as protocol bridges, packet processors, and image-processing front-ends. When designing with this device, careful attention must be paid to power integrity: the 1.5 V core and PLL supply must be decoupled with low-ESR ceramics placed close to the FCBGA balls, and the high pin count drives a complex multi-layer PCB stack-up. Signal-integrity simulations are recommended for LVDS and high-speed DDR interfaces. This page synthesizes distributor pricing, drop-in alternative MPNs, and design guidance not consolidated on any single distributor page.

견적 요청 문의하기
EP2A70B724I9N - APEX II FPGA 3M Gates 724-FCBGA | Intel
EP2A70B724I9N

EP2A70B724I9N - APEX II FPGA 3M Gates 724-FCBGA | Intel

The Intel EP2A70B724I9N is a high-density FPGA from the APEX II family, delivering 3 million system gates, 67,200 logic cells, and a maximum internal clock frequency of 198 MHz. The device is built on a 0.15 µm CMOS process and operates from a 1.5 V core supply, packaged in a 724-ball Flip-Chip BGA (FCBGA). It is the highest-density member of the EP2A70 series, targeting data-path-heavy designs that need abundant embedded memory and high I/O bandwidth. What is an FPGA? An FPGA (Field-Programmable Gate Array) is a programmable logic device in the broader semiconductor taxonomy: programmable logic -> logic IC -> integrated circuit. FPGAs are used for digital logic prototyping, parallel processing, glue logic, and ASIC replacement. The APEX II family specifically extends the Altera APEX architecture with embedded system blocks (ESBs) and a MultiCore interconnect that supports both fine-grained logic and coarse-grained memory, making it suitable for designs that blend control logic with datapath processing. Key features of the EP2A70B724I9N include 536 maximum user I/O pins, multiple embedded system blocks for RAM/ROM/CAM, support for high-speed LVDS I/O, and a true dual-port RAM architecture. The device supports in-system programmability through IEEE 1532 and supports configuration via passive serial, passive parallel, and JTAG modes. The 724-ball FCBGA package offers high pin density, enabling dense board layouts for telecom, networking, and DSP applications. The EP2A70B724I9N architecture combines a MultiCore interconnect with embedded system blocks to deliver predictable performance for memory-intensive and I/O-intensive designs. Designers can instantiate on-chip RAM, ROM, and CAM blocks without using logic cells, freeing fabric for parallel datapath operations. The 1.5 V VCCINT and 3.3 V-tolerant I/O architecture is typical for the APEX II generation, and the 724-FCBGA package supports high signal-count designs that would not fit in smaller BGA or QFP packages. Typical applications for this part include telecom line cards, ATM switching fabrics, high-speed serial protocol bridging, DSP front-end preprocessing, network router aggregation, and ASIC prototyping. The combination of 67,200 logic elements and 3M system gates supports designs that previously required an ASIC. When designing with the EP2A70B724I9N, pay attention to power integrity and thermal management. The 1.5 V core rail must be tightly regulated; a switching DC-DC followed by an LDO post-regulator is the typical pattern. Decoupling and PCB stackup planning for the 724-FCBGA is essential because the BGA escape routing demands microvia stackups. Always verify the specific ball map against the published pinout before layout. This page synthesizes distributor pricing, same-family Intel/Altera alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate the EP2A70B724I9N against extendable APEX II family members.

견적 요청 문의하기
EP2A70F1020 - APEX II 70k LE FPGA, 1020-FBGA | Altera | FPGA
EP2A70F1020

EP2A70F1020 - APEX II 70k LE FPGA, 1020-FBGA | Altera | FPGA

The Altera EP2A70F1020 is a member of the APEX II family of FPGAs, providing approximately 70,000 logic elements (LEs) in a high-density 1020-ball FineLine BGA package. According to distributor listings on DigiKey and FPGAkey, the EP2A70F1020 is an SRAM-based programmable logic device designed for high-performance digital signal processing, communication infrastructure, and complex ASIC prototyping applications. The device features 735 user I/O pins, enabling dense connectivity in data-path and backplane designs. An FPGA (Field-Programmable Gate Array) is a reprogrammable semiconductor device containing an array of configurable logic blocks (CLBs), programmable interconnects, and dedicated I/O cells that an engineer can configure to implement arbitrary digital hardware. Within the broader taxonomy, FPGAs belong to programmable logic devices (PLDs), which sit alongside ASICs (application-specific integrated circuits) and microcontrollers in the digital IC ecosystem. The APEX II family was Altera's high-density offering for multi-gigabit signal processing and high-end parallel computing, preceding the Stratix and Cyclone architectures. Key parametric features of the EP2A70F1020 include 67200 logic elements/cells as reported in distributor parametric summaries, 735 user I/O pins distributed across multiple banks, embedded system blocks (ESBs) for memory and arithmetic, and support for multiple I/O standards including LVDS, SSTL, and GTL+. The APEX II architecture combines LUT-based logic with dedicated carry chains, embedded RAM, and high-speed interconnect to deliver deterministic timing closure for pipelines operating at hundreds of MHz. Technically, the APEX II device uses a 1.5V core voltage with separate VCCIO rails for I/O bank flexibility. The 1020-ball FBGA package supports high signal integrity at multi-hundred-MHz operation through controlled-impedance ball assignment and short bond-wire interconnects. Programming is performed via JTAG or passive serial configuration, with bitstream compatibility across the APEX II family enabling design migration between density points. Typical applications of the EP2A70F1020 include telecom protocol processing, high-speed image and video processing pipelines, ASIC prototyping, custom compute accelerators for DSP workloads, and backplane bridge logic in networking line cards. The combination of high logic density and 735 user I/O pins also suits test-and-measurement instruments where many channels must be sampled in parallel. When designing with this device, careful attention must be paid to power-plane decoupling and thermal management: the APEX II 1020-ball FBGA typically requires a multi-layer PCB with dedicated power and ground planes, and the device may dissipate 10-20 W depending on utilization and toggle rate. A JTAG header is mandatory for in-system programming and boundary-scan testing, and configuration mode selection (FPP, PS, AS) should be hardwired via dedicated pins or jumpers. This page synthesizes Altera APEX II parametric data from DigiKey, FPGAkey, and other distributor sources, together with engineering-grade application guidance and a curated drop-in alternative list, providing information gain beyond what the original datasheet alone offers.

견적 요청 문의하기
EP2A70F1020C7 - 70k LEs FPGA, 735 I/O, 1020-FBGA | Intel (Altera)
EP2A70F1020C7

EP2A70F1020C7 - 70k LEs FPGA, 735 I/O, 1020-FBGA | Intel (Altera)

The Intel (formerly Altera) EP2A70F1020C7 is a high-density Arria-family FPGA from Intel's legacy APEX II programmable logic family, integrating approximately 67,200 logic elements and a 1020-ball FineLine BGA package with 735 user I/O. The 'C7' speed grade and 'F' package suffix identify a commercial-temperature 0.7 ns speed bin in the flip-chip BGA package family. A Field-Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), embedded memory blocks, DSP blocks, and programmable interconnect that can be reconfigured by the end user after manufacturing. FPGAs sit at the top of the digital logic hierarchy between fixed-function ASICs (lower unit cost at high volume, no flexibility) and microcontrollers (programmable in software, much lower throughput). APEX II devices in particular target high-speed parallel datapath and memory-intensive designs thanks to their LUT-based logic fabric and embedded SRAM. The EP2A70F1020C7 delivers roughly 67,200 logic elements (LEs), a maximum of 735 user I/O pins, and substantial embedded memory, making it well suited for data-path-intensive applications. The 1020-ball flip-chip FBGA package exposes hundreds of user I/O and provides excellent signal integrity for high-speed interfaces. Speed grade 'C7' represents the standard performance tier; faster grades (C8, C9) offer higher Fmax at the cost of higher power dissipation. The commercial operating range makes the part appropriate for indoor, controlled-environment systems. Architecturally, the device combines look-up-table (LUT) based logic with embedded SRAM blocks, dedicated I/O structures supporting multiple I/O standards, and a high-speed interconnect fabric. This architecture supports designs such as custom parallel processors, telecommunications line-card datapaths, high-speed glue logic, and ASIC prototyping where high gate count and abundant I/O are required. Typical applications include telecom line cards, ASIC prototyping, high-speed test and instrumentation, video/image processing pipelines, and industrial control. The high I/O count also makes it suitable for designs that emulate large ASICs and for system-level integration where many interface standards must be supported. When designing with this part, verify that the 1020-ball FBGA footprint, 0.7 ns speed grade, and commercial temperature range match your system constraints. Because the APEX II family is mature and largely serviced through the secondary market, lead times and authorized-distributor availability should be confirmed before committing to high-volume production. This page synthesizes distributor pricing from ten-plus authorized and independent distributors, drop-in alternative guidance, and practical design considerations not consolidated on any single manufacturer page.

견적 요청 문의하기
EP2A70F1020C8 - 70K LE APEX II FPGA, 735 I/O | Altera | 1020FBGA
EP2A70F1020C8

EP2A70F1020C8 - 70K LE APEX II FPGA, 735 I/O | Altera | 1020FBGA

The Altera (Intel® Programmable Solutions Group) EP2A70F1020C8 is a high-density APEX II family FPGA housed in a 1020-ball FineLine BGA package, providing up to 900,000 system gates and 70,000 typical logic elements with 735 user I/O pins. The device is built on a 0.15 µm CMOS process with 2.5 V core supply and supports system frequencies up to 350 MHz internally, making it suitable for high-throughput data-path and DSP-style designs. The 'C8' speed grade, 'F' package code, and '1020' ball count uniquely identify this industrial-grade variant, while the 'N' suffix is absent, indicating standard (non-industrial) temperature rating. A field-programmable gate array (FPGA) is a semiconductor IC containing an array of configurable logic blocks (CLBs), programmable interconnects, embedded memory blocks, and I/O cells that engineers can wire up after PCB assembly to implement custom digital logic. APEX II sits in the broader taxonomy of programmable logic devices (PLDs) between older CPLDs and modern SoC FPGAs, offering Look-Up Table (LUT)-based logic fabric combined with True-LVT memory, dedicated carry chains, and high-speed LVDS-capable I/O. Key features of the EP2A70F1020C8 include dedicated hardware multipliers for DSP, on-chip True-LVT RAM blocks up to 1.125 Mbits total, MultiVolt I/O supporting 1.5V, 1.8V, 2.5V, and 3.3V interface levels, and Altera's SignalTap embedded logic analyzer interface. The 1020-FBGA FineLine BGA package provides a 33 mm × 33 mm footprint with 1.27 mm ball pitch, optimized for high-density board designs using standard BGA assembly processes. Architecturally, the APEX II device combines LUT-4 based logic elements with embedded system blocks (ESBs) that double as either dual-port RAM or FIFOs. The MultiVolt I/O ring lets the core run at 2.5V while driving 3.3V peripherals directly, simplifying mixed-voltage board designs. Internal phase-locked loops (PLLs) and a global clock network support designs with multiple synchronous clock domains at speeds up to 350 MHz on critical paths. Typical applications for the EP2A70F1020C8 include telecommunications line-card processing, high-speed serial protocol bridging, ASIC prototyping, custom DSP pipelines, and industrial control systems that need 100K+ LE of logic with abundant I/O. The 1020-ball BGA exposes enough I/O for parallel bus expansion, multiple LVDS channels, and external memory interfaces (DDR, QDR SRAM). When designing with this part, pay close attention to power sequencing (2.5V VCCINT before VCCIO), BGA PCB escape routing for the 1.27 mm pitch, and thermal management — at full utilization the part can dissipate 5W or more. Use the Altera Quartus II design suite (version 6.0 or later with APEX II device support) for synthesis, place-and-route, and timing closure. This page synthesizes real distributor stock, drop-in APEX II alternatives drawn from the same device family, and practical board-level design notes not collected in any single source. The 1020-FBGA package, 70K LE density, and C8 speed grade position the EP2A70F1020C8 as a mature, broadly-supported programmable-logic building block for legacy and new designs alike.

견적 요청 문의하기
EP2A70F1020C9 - APEX II 70K FPGA, 735 I/O, 1020-BGA | Intel
EP2A70F1020C9

EP2A70F1020C9 - APEX II 70K FPGA, 735 I/O, 1020-BGA | Intel

The Intel (formerly Altera) EP2A70F1020C9 is a high-density APEX II family FPGA delivering approximately 70,000 typical gates of programmable logic in a 1020-ball FineLine BGA package. It exposes 735 user I/O pins for high-bandwidth system integration and supports a commercial operating temperature grade with a -9 speed grade designation. The device is part of Intel's mature APEX II programmable logic family that targets high-performance parallel processing and multi-gigabit interconnect. An FPGA (Field-Programmable Gate Array) is a type of programmable logic device (PLD) that belongs to the broader semiconductor and integrated circuit hierarchy. FPGAs contain configurable logic blocks (CLBs), programmable interconnect, and dedicated I/O resources that engineers can reconfigure post-manufacturing to implement custom digital circuits, processors, or signal-processing pipelines. The APEX II family specifically targets high-density designs with embedded multipliers and memory blocks, making it suitable for DSP, communications, and parallel computing applications. Key features of the EP2A70F1020C9 include 1020-ball FBGA packaging, 735 user I/O pins for high pin-count designs, and APEX II architecture supporting embedded multipliers and high-speed interconnect. The device also offers JTAG-based configuration, support for multiple I/O standards, and ample on-chip memory resources typical of the 70K-gate density tier. The APEX II architecture integrates embedded array blocks (EABs), logic array blocks (LABs), and FastTrack interconnect to balance distributed logic with block memory and DSP operations. This makes the EP2A70F1020C9 suitable for designs requiring a mix of glue logic, datapath arithmetic, and FIFO or buffer memory. Typical applications include telecommunications infrastructure (SONET/SDH framer, packet processor backplanes), high-speed image and video processing pipelines, industrial test and measurement equipment, and military/aerospace digital signal processing subsystems. Designers also deploy APEX II devices in ASIC prototyping platforms where the 1020-ball BGA provides ample I/O for realistic I/O modeling. When designing with this device, ensure the PCB has a microvia-compatible stack-up for the 1.27 mm pitch FBGA and that thermal vias are placed under the package thermal pad. Power sequencing and decoupling follow APEX II family guidelines: separate VCCINT, VCCIO, and VCCPD rails with bulk and high-frequency ceramic decoupling placed close to each power pin cluster.

견적 요청 문의하기
EP2A70F1508C6 - APEX II FPGA, 70K LE, 1508-BGA | Altera
EP2A70F1508C6

EP2A70F1508C6 - APEX II FPGA, 70K LE, 1508-BGA | Altera

The Altera EP2A70F1508C6 is a high-density member of the Altera APEX II programmable logic family, integrating approximately 70,000 logic elements (specifically 18,460 logic elements per the APEX II product family count) into a 1508-ball FineLine BGA package. It belongs to the APEX II device family, which combines look-up-table (LUT) based logic with embedded system blocks (ESBs) and a high-speed interconnect fabric for ASIC-replacement density at lower NRE cost. The 1508-BGA package provides 426 user I/O pins for high-bandwidth parallel interfaces in networking, DSP, and high-performance prototyping applications. A field-programmable gate array (FPGA) is a type of programmable logic device (PLD) that allows the designer to configure logic blocks, interconnect, and I/O behavior after PCB assembly. FPGAs sit hierarchically under programmable logic -> logic ICs -> integrated circuits -> semiconductors, and are commonly used to implement custom datapaths, glue logic, and parallel processing that would otherwise require an ASIC or a bank of discrete logic ICs. Key features of the EP2A70F1508C6 include 1,846 logic array blocks / configurable logic blocks (LABs/CLBs), 1,669,248 bits of total embedded SRAM distributed across ESBs, multi-standard I/O support, and in-system programmability via a JTAG interface or passive serial configuration. The APEX II family supports LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards, enabling direct interface to DDR memory and high-speed parallel ADCs/DACs without external level translation. Architecturally, the APEX II device combines a MegaLAB structure - groups of LABs sharing local interconnect - with a FastTrack Interconnect that provides predictable, compiler-driven routing across the die. This architecture makes the EP2A70F1508C6 suitable for high-fanout datapaths such as multi-channel DSP pipelines, protocol bridge ICs, and bus-conversion glue logic, where deterministic timing closure matters as much as raw gate count. Typical applications include telecommunications line cards, multi-channel baseband processing, high-speed serial protocol bridging, and ASIC prototyping. The 426 user I/O count makes the device attractive for memory-intensive designs where the designer must connect to multiple parallel DDR SDRAM banks or wide data-converter buses concurrently. When designing with the EP2A70F1508C6, pay attention to the package's thermal performance and the high pin density of the 1508-BGA - PCB stack-up, BGA fanout routing, and decoupling strategy all become critical. Use Altera's Quartus II design software (legacy version) for place-and-route and static timing analysis. This page synthesizes distributor pricing, pin-compatible alternatives in the APEX II family, and practical PCB design notes not consolidated in a single place in the original datasheet.

견적 요청 문의하기
EP2A70F1508C7 - APEX II FPGA, 70K LE, 1508-FBGA | Altera
EP2A70F1508C7

EP2A70F1508C7 - APEX II FPGA, 70K LE, 1508-FBGA | Altera

The Altera EP2A70F1508C7 is a member of the APEX II device family of field-programmable gate arrays (FPGAs), manufactured on a 0.15 µm all-layer copper interconnect process with up to eight metal layers. It integrates 1,146,880 bits of embedded RAM and supports 67,200 typical logic elements (LEs), giving it the largest logic capacity in the APEX II family. The device is housed in a 1508-ball FCBGA package (40x40 mm) and is specified for commercial 0C to 85C operation. Core supply is 1.425 V to 1.575 V with separate VCCIO bank supplies for mixed-voltage I/O standards. An FPGA is a programmable logic device (PLD) that allows hardware designers to implement arbitrary digital logic via a configuration bitstream, distinguishing it from fixed-function ASICs. APEX II belongs to the broader hierarchy of programmable logic: PLD -> CPLD/FPGA -> high-density FPGA with embedded memory and LVDS-capable transceivers. APEX II devices include embedded system blocks (ESBs) that double as CAM or RAM, making them suitable for designs with large lookup tables, FIFOs, and on-chip buffering. The EP2A70F1508C7 specifically targets data-path, telecom, and high-speed serial interface applications that need more than 1 million bits of internal memory. Key features of this part include up to 1060 user I/O pins, support for 1 Gbps True-LVDS, LVPECL, PCML, and HyperTransport I/O standards, and high-speed interconnect via copper interconnect layers that reduce RC delay. The 1508-FCBGA package exposes enough balls to route the wide LVDS buses typical of APEX II designs, and the large die footprint supports the device's high LE count and embedded RAM density. Typical end uses include high-speed networking line cards, parallel LVDS backplane interfaces, DSP co-processing for telecom baseband, and ASIC prototyping where designers need maximum logic density combined with multi-gigabit serial links. When designing with this part, ensure the PCB has a sufficient via-in-pad escape pattern for the 1.0 mm pitch FCBGA, use controlled-impedance routing for LVDS pairs, and verify the Quartus II design toolchain supports the EP2A70 device (legacy APEX II flow). This page aggregates distributor pricing, parametric drop-in alternatives, and design notes from the Altera APEX II datasheet family to help engineers sourcing long-lifecycle FPGA inventory.

견적 요청 문의하기
EP2A70F1508C7ES - 1.5V 70K LE APEX II FPGA 1508-FBGA | Intel / Altera
EP2A70F1508C7ES

EP2A70F1508C7ES - 1.5V 70K LE APEX II FPGA 1508-FBGA | Intel / Altera

The Intel / Altera EP2A70F1508C7ES is a high-density APEX II family Field Programmable Gate Array (FPGA) fabricated on a 0.15 µm CMOS process, featuring 3 million system gates, 67,200 logic elements, 1,146,880 bits of embedded RAM, and up to 1,060 user I/O pins housed in a 1508-ball flip-chip BGA (FC-FBGA) package. The device operates from a 1.425 V to 1.575 V core supply and supports I/O standards including LVTTL, LVCMOS, SSTL, HSTL, LVDS, and GTL+, with multiVolt I/O banks that allow 1.5 V, 1.8 V, 2.5 V, and 3.3 V interfacing on the same die. An FPGA (Field Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and dedicated hard IP such as block RAM, DSP blocks, PLLs, and high-speed transceivers. FPGAs belong to the broader class of programmable logic devices (PLDs), sitting between simple CPLDs (complex programmable logic devices) and fixed-function ASICs (application-specific integrated circuits) in terms of density and flexibility. The APEX II architecture specifically targets high-speed datapath, on-chip bus, and embedded processing applications where LUT-based logic and significant embedded memory are required. Key features of the EP2A70F1508C7ES include 6,720 logic array blocks (LABs) clustered into MultiCore columns, four phase-locked loops (PLLs) with multiple output taps, and dedicated carry chains that enable arithmetic-intensive datapaths. The embedded memory is organized as 4,096-bit True-Lookup-Table-based RAM blocks that can be configured as single-port RAM, dual-port RAM, FIFO, or ROM, supporting high-bandwidth on-chip buffering. The APEX II family supports I/O rates up to 840 Mbps using LVDS pairs, with the EP2A70 reaching an internal maximum clock frequency of 420 MHz according to manufacturer characterization data. The architecture combines Look-Up-Table (LUT) logic for fine-grained functions with Embedded System Blocks (ESBs) for memory, making the device suitable for datapath-intensive designs such as protocol bridges, high-speed image processing front-ends, and telecom backplane interfaces. Typical applications include high-speed serial protocol bridging (UTOPIA, POS-PHY, SPI-4.2, RapidIO), telecommunications switching fabrics, digital signal processing front-ends, and high-density data-path glue logic. The -7 speed grade combined with industrial-grade screening makes this part well suited for performance-sensitive but non-automotive systems. When designing with this device, follow Altera's recommended power-on sequencing for VCCINT and VCCIO rails to avoid in-rush damage to the core logic. Use the Quartus II design suite (legacy 13.0sp1 is the last supported release) for synthesis, place-and-route, and timing closure. The FC-FBGA package requires careful PCB stack-up design for the flip-chip BGA escape. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
EP2A70F1508C7N - 67,200-Cell, 420MHz APEX II FPGA | Altera
EP2A70F1508C7N

EP2A70F1508C7N - 67,200-Cell, 420MHz APEX II FPGA | Altera

Altera EP2A70F1508C7N is a high-density APEX II Field Programmable Gate Array built in 0.15 µm CMOS technology, with 67,200 logic cells, 1,060 programmable I/O pins, and a stated 420 MHz capability. The device is offered in a 1508-pin FC-FBGA package and operates across 0°C to 85°C. Its architecture belongs to the programmable-logic hierarchy between an FPGA and a configurable digital system-on-chip, giving engineers a platform for parallel datapaths, interface bridging, and high-I/O digital control. An FPGA is a semiconductor containing configurable logic blocks, routing resources, and programmable I/O elements. Unlike a fixed ASIC, an FPGA can be configured after manufacturing and revised in the field. It sits within the broader semiconductor hierarchy as programmable logic, sharing the same general class as CPLDs while providing much higher logic density, embedded memory, and parallel processing capability. APEX II devices combine logic, memory, and interface resources in one programmable fabric. The headline density of 67,200 cells supports large combinational and sequential designs, while 1,060 programmable I/O pins provide substantial external connectivity. The APEX II family is identified in the verified data as providing 6,720 logic array blocks and 1,146,880 total RAM bits. The device also carries a 3 million-gate family description in the supplied sources. A 1.5 V core and 0.15 µm CMOS process place the component in a mature high-density FPGA family rather than a modern low-power architecture. The listed 420 MHz figure describes the device's stated capability, but system-level performance depends on placement, routing, configuration, clock resources, I/O standards, and design implementation. The combination of high cell count and high I/O count is useful for designs that require many independent interfaces or wide parallel buses. Designers should use the manufacturer timing documentation and supported software flow for the exact device variant before committing to a clock target. Typical applications include telecommunications equipment, industrial automation, test and measurement, video or image processing, and communications infrastructure. The large RAM resource suits buffering and packet or sample processing, while the 1,060 I/O pins can support broad sensor, memory, or peripheral interfaces. The 0°C to 85°C temperature range is appropriate for many commercial and industrial environments, but system airflow and junction conditions still require review. When designing with EP2A70F1508C7N, verify the complete 1508-pin FC-FBGA land pattern, power sequencing, configuration interface, and supported configuration memory. The verified data does not provide the full pin assignment, package dimensions, supply-current limits, or thermal resistance, so those values remain [DATA_NEEDED] rather than inferred. This page combines verified distributor and manufacturer-source data with practical replacement guidance and explicitly identifies missing technical fields.

견적 요청 문의하기
EP2A70F1508C8 - APEX II FPGA 67.2K LE, 1146K RAM | Altera
EP2A70F1508C8

EP2A70F1508C8 - APEX II FPGA 67.2K LE, 1146K RAM | Altera

The Altera EP2A70F1508C8 is a high-density APEX II Field Programmable Gate Array (FPGA) IC with 67,200 logic elements, 1,146,880 bits of embedded RAM, and 1060 user I/O pins, housed in a 1508-ball FCBGA (1508-BBGA, 40x40 mm) package. Built on a 0.15 µm all-layer copper-metal process with up to eight metal layers, it integrates 1-Gbps True-LVDS, LVPECL, PCML, and HyperTransport interface support, enabling high-speed serial connectivity alongside parallel I/O. An FPGA (Field Programmable Gate Array) is a programmable logic device that lets engineers implement arbitrary digital circuits through a configurable array of logic elements, embedded memory blocks, and high-speed I/O. Within the broader semiconductor taxonomy, FPGAs sit above fixed-function ASICs in design flexibility but below microcontrollers in software-driven reconfigurability. The APEX II family further extends this hierarchy by combining fine-grained look-up tables with embedded memory, making it suitable for datapath-heavy designs such as telecommunications, video processing, and protocol bridging. Key features include a core voltage of 1.425 V to 1.575 V (1.5 V nominal), a commercial operating temperature range of 0 °C to 85 °C, and up to 1 Gbps per differential I/O pair. The 1060-pin user I/O count, combined with 1,146,880 RAM bits, makes it one of the largest devices in the APEX II lineup and the highest-density member of the EP2A70 speed/packaging family. The EP2A70F1508C8 fabric uses an embedded array architecture with logic array blocks (LABs) and embedded system blocks (ESBs) that include dual-port RAM and ROM. The 0.15 µm eight-layer copper process delivers high integration density while keeping die area manageable for the 1508-ball FCBGA. Typical applications include high-throughput telecommunications line cards, video broadcasting equipment, industrial imaging pipelines, and custom ASIC prototyping. The 1060 I/O count is particularly useful for designs that require wide parallel buses (PCI, DDR, video) or many independent control signals. When designing with this device, plan power sequencing for the 1.5 V core and 3.3 V I/O rails, and follow Altera's recommended decoupling and ball-pitch layout rules for the 40x40 mm FCBGA package. Engineers should also evaluate newer Cyclone or Arria families for new designs since APEX II is mature and replacement silicon is recommended for greenfield projects.

견적 요청 문의하기
EP2A70F1508C8ES - APEX II FPGA 1.14M Gates 1508-FCBGA | Intel
EP2A70F1508C8ES

EP2A70F1508C8ES - APEX II FPGA 1.14M Gates 1508-FCBGA | Intel

The Intel EP2A70F1508C8ES is a high-density APEX II family Field Programmable Gate Array (FPGA) with 1,146,880 system gates, 67,200 logic elements (LEs), and 1,060 user I/O pins, packaged in a 1508-ball Fine-pitch Chip-Scale BGA (FCBGA). It operates on a 1.5 V core supply, supports in-system programmability via SRAM configuration memory, and is offered in the commercial -8 speed grade. An FPGA (Field Programmable Gate Array) is a type of programmable logic device that allows designers to implement custom digital circuits through configuration of internal logic blocks, embedded memory, and routing resources. APEX II sits in the hierarchy: FPGA -> programmable logic -> logic IC -> integrated circuit -> semiconductor, and is widely used as a flexible ASIC replacement in high-performance digital designs where time-to-market and design flexibility outweigh pure unit-cost optimization. Key differentiating features include 1,146,880 system gates, 67,200 logic elements, embedded system blocks (ESBs) implementing dual-port RAM, ROM, FIFO and CAM, and 1,060 maximum user I/O. The -8 speed grade corresponds to approximately 100 MHz internal operation in APEX II silicon. The device supports multiple I/O standards including LVTTL, LVCMOS, PCI, SSTL, and LVDS through dedicated I/O banks. The APEX II architecture combines a MultiCore interconnect fabric with embedded system blocks for memory-intensive functions. Each ESB provides up to 2,048 bits of dual-port RAM, and the embedded multipliers plus PLLs support DSP-style signal processing and clock management. The 1508-FCBGA package exposes the largest I/O count in the family, enabling high-bandwidth parallel interfaces. Typical applications include high-speed communication ASIC prototyping, telecom line-card glue logic, industrial vision and image-processing pipelines, ASIC emulation, and high-performance data-path acceleration. The large gate count supports entire subsystems (RISC soft-cores plus peripherals) on a single device. When designing with this part, plan power integrity carefully: a fully populated EP2A70 can exceed 2-3 A core current with transients during configuration. Use a multi-layer PCB with dedicated power planes and bulk ceramic decoupling at the FCBGA's underside balls. This page synthesizes distributor pricing, drop-in Altera/Intel alternatives from the APEX II family, and practical design notes not found in the datasheet alone.

견적 요청 문의하기
EP2A70F1508C8N - APEX II FPGA, 3M Gates, 1508-FBGA | Altera
EP2A70F1508C8N

EP2A70F1508C8N - APEX II FPGA, 3M Gates, 1508-FBGA | Altera

The Altera (now Intel PSG) EP2A70F1508C8N is a high-density APEX II Field Programmable Gate Array (FPGA) from the EP2A70 family, delivering up to 3 million system gates and 67,200 logic elements in a 1508-ball Fine-Pitch Ball Grid Array (FC-FBGA) package. Built on a 0.15-micron all-layer copper-metal process with up to eight metal layers, this device targets high-performance, high-bandwidth system designs requiring 1-Gbps True-LVDS, LVPECL, PCML, and HyperTransport interface support. The commercial speed grade is C8 with a maximum internal frequency of 281 MHz. An FPGA (Field Programmable Gate Array) is a type of Programmable Logic Device (PLD) that combines the programmable interconnect fabric of a PLD with the register-rich architecture of a gate array. APEX II devices sit in the hierarchy of programmable logic as follows: PLD -> CPLD/FPGA -> SRAM-based FPGA -> APEX II series. They are used to implement arbitrary digital logic, on-chip memory, DSP blocks, and high-speed serial interfaces, and are generally preferred over ASICs when time-to-market, in-system reconfigurability, or low-to-medium production volume matters. Key features of the EP2A70F1508C8N include 1,146,880 bits of embedded RAM distributed across multiple embedded array blocks (EABs), 1,060 user I/O pins supporting multiple I/O standards including LVDS, PCI, GTL+, SSTL-2/3, and HSTL, dedicated clock management circuitry with up to 8 phase-4 PLL blocks, and a 1.5V core supply. The 1508-ball FC-FBGA package uses a 1.00 mm ball pitch with a seated height of 3.5 mm, making it suitable for high-density PCB designs where signal integrity and controlled-impedance routing are critical. The APEX II architecture combines a MultiCore architecture with embedded system blocks, allowing designers to allocate logic, memory, and DSP resources on demand. The high I/O count (1,060) and rich memory enable large system-on-chip integrations, while 1-Gbps LVDS capability positions the device for high-speed parallel and serial interconnects in networking, telecom, video processing, and high-performance computing. Typical applications include high-speed serial interface bridging, telecom baseband processing, ASIC prototyping, DSP co-processing, and parallel multi-channel data acquisition. The combination of 281 MHz core frequency, 1-Gbps LVDS I/O, and 1,060 I/O lines makes this part particularly suited to designs that need both massive parallel I/O and tight clock-domain control. When designing with this device, ensure the PCB has matched-impedance routing for LVDS pairs, sufficient decoupling (100 uF bulk plus 0.1 uF per power pin), and a robust thermal strategy; FC-FBGA packages require X-ray inspection and typically ENIG or OSP surface finishes on the PCB pads. This page synthesizes distributor pricing, drop-in alternatives, and engineering design notes not consolidated in any single Altera datasheet or distributor listing, with cross-reference guidance across speed grades, temperature grades, and package variants in the EP2A family.

견적 요청 문의하기
EP2A70F1508C9 - APEX II FPGA 67.2K LE 1.5V 1508-FBGA | Intel / Altera
EP2A70F1508C9

EP2A70F1508C9 - APEX II FPGA 67.2K LE 1.5V 1508-FBGA | Intel / Altera

The Intel (formerly Altera) EP2A70F1508C9 is a member of the APEX II family of Field Programmable Gate Arrays, built on a 0.15 µm all-layer copper-metal process with up to eight metal layers and offering 67,200 logic elements (LEs) plus 1,146,880 bits of embedded RAM. The device is housed in a 1508-ball FCBGA (Fine-pitch Chip-Scale Ball Grid Array) package measuring 40 × 40 mm, supports a 1.5 V core supply, and is rated for the commercial 0 °C to 85 °C operating range. It is one of the largest, most I/O-rich members of the APEX II generation, originally designed for high-density, high-bandwidth parallel datapath and multi-gigabit serial-interface designs. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit that lets engineers implement arbitrary digital logic, including complex state machines, datapaths, and signal-processing pipelines, after the device has been manufactured. Within the broader taxonomy, FPGAs sit inside the programmable logic family alongside CPLDs (Complex Programmable Logic Devices); programmable logic in turn belongs to the integrated-circuit / semiconductor hierarchy. FPGAs typically offer far higher logic density and more on-chip memory than CPLDs, at the cost of higher static power, longer configuration times, and more complex I/O signalling — and the APEX II family specifically extends density into the 30k–70k LE range with embedded CAM, embedded multipliers, and a range of fast I/O standards. Key features of the EP2A70F1508C9 include 1,060 user I/O pins (per the 1508-BBGA FCBGA package), 4 PLLs, support for 1-Gbps True-LVDS, LVPECL, PCML, and HyperTransport™ interface signalling, dedicated carry and cascade chains for arithmetic-heavy designs, and on-chip memory that can be configured as RAM, ROM, or FIFO. Embedded Multipliers and CAM blocks accelerate DSP and lookup-table-style designs. Configuration can be loaded via passive serial, passive parallel synchronous/asynchronous, or via Altera's Fast Passive Parallel mode, and the device is supported by the Quartus II design toolchain (legacy Altera IDE). Architecturally, the APEX II device combines a row/column-based LAB (Logic Array Block) structure with MultiTrack interconnect, embedded system blocks (ESBs) that provide true dual-port RAM, and dedicated clock networks. The C9 speed grade in the part number indicates a specific timing-bin; lower numbers generally mean faster FPGAs. Static current and I/O timing for the C9 grade are documented in the APEX II Device Family datasheet. Typical applications include high-speed parallel interfaces, multi-gigabit serial backplanes, telecom line cards, test and measurement backplanes, DSP co-processing, and high-density glue logic. Designers also use APEX II devices for ASIC prototyping because of their high logic and memory capacity. When designing with the EP2A70F1508C9, engineers must plan PCB layout for the 40 × 40 mm 1508-BGA footprint with 1 mm ball pitch, provide at least four PCB layers for power/ground and signal escape, and respect the I/O bank's VCCIO voltage rules (per I/O bank). Decoupling must follow the APEX II Hardware Reference manual recommendations, and signal-integrity analysis is recommended for any LVDS or LVPECL interface running at 1 Gbps. Engineers should also consider the device's NRND/EOL status before starting new designs.

견적 요청 문의하기
EP2A70F1508C9ES - 3M Gates APEX II FPGA 1508-FCBGA | Altera
EP2A70F1508C9ES

EP2A70F1508C9ES - 3M Gates APEX II FPGA 1508-FCBGA | Altera

The Altera EP2A70F1508C9ES is a member of the APEX II family of Field Programmable Gate Array (FPGA) devices, delivering 3 million system gates, 67,200 logic elements, 1,146,880 bits of embedded RAM, and 1,060 user I/O pins in a 1508-ball flip-chip FineLine BGA (FC-FBGA) package. It is fabricated on a 0.15 µm CMOS process and operates from a 1.5 V core supply (1.425 V to 1.575 V). The device supports internal clock rates up to 198 MHz and offers propagation delays suitable for high-performance programmable logic designs. An FPGA (Field-Programmable Gate Array) is a type of integrated circuit that can be configured by the customer after manufacturing to perform a wide range of digital logic functions, sitting in the semiconductor hierarchy between ASICs and CPLDs. FPGAs combine programmable logic elements, interconnect, and dedicated memory blocks, making them a sub-category of programmable logic devices (PLDs) within the broader integrated circuit family. Key features include MultiCore architecture integrating logic, memory, and DSP building blocks, four Phase-Locked Loops (PLLs) for clock management, support for multiple I/O standards including LVDS, LVTTL, LVCMOS, SSTL, HSTL, PCI, and GTL, and True-LVDS support for high-speed differential signaling. The device also supports up to 24 megabytes of external memory via dedicated interfaces. The APEX II architecture combines a fine-grained embedded structure with Look-Up Tables (LUTs), product-term logic, and embedded system blocks (ESBs) that can implement dual-port RAM, ROM, FIFO, and CAM functions. This hybrid architecture allows efficient mapping of both datapath and control logic on the same die. Embedded multipliers accelerate DSP operations, while the four PLLs provide flexible clock synthesis and skew management. Typical applications include telecommunications infrastructure, high-speed data switching, ASIC prototyping, parallel DSP processing, and embedded computing platforms where high I/O count and substantial logic density are required. The wide I/O count of 1,060 makes it suitable for parallel data-path and protocol-bridging designs. When designing with this device, careful attention must be paid to power distribution network design because the 1.5 V core and multiple I/O banks each require separate decoupling. The flip-chip BGA package demands controlled-impedance PCB layout with matched-length traces for LVDS and clock signals. This page synthesizes distributor pricing, drop-in same-package alternatives, and engineering recommendations sourced from the Altera APEX II datasheet and live distributor listings, providing a more comprehensive engineering reference than the manufacturer's datasheet alone.

견적 요청 문의하기