10CX105YF780I6G - Cyclone 10 GX FPGA 104K LE | Intel | 780-FBGA
부품 번호: 10CX105YF780I6G ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $1826.62 | $1,826.62 |
| 10 | $1750 | $17,500.00 |
| 100 | $1620 | $162,000.00 |
| 250 | $1555 | $388,750.00 |
| 500 | $1495 | $747,500.00 |
10CX105YF780I6G 개요
An FPGA is a programmable logic device containing configurable logic blocks (CLBs), dedicated DSP blocks, embedded SRAM, and programmable I/O, all interconnected by a programmable routing fabric. FPGAs occupy a middle ground between fixed-function ASICs and general-purpose microcontrollers: they deliver hardware parallelism and deterministic latency for data-pipeline tasks while allowing full logic redesign after PCB fabrication. Within Intel's low-power Cyclone family, the Cyclone 10 GX adds hardened transceivers and an integrated protocol stack for PCI Express Gen2 and 10 GbE (10GBASE-R/KR) on the higher-density members, differentiating it from the transceiver-less Cyclone 10 LP.
Key features of the 10CX105YF780I6G include 104K logic elements, 8,641,536 embedded memory bits, 156 embedded 18x18 multipliers, 1 PLL per side, and 6 transceiver channels operating up to 6.144 Gbps. The device also provides 2 hard memory controllers and 1 PCIe Gen2 hard IP block (x4 root port or endpoint). The 780-pin FCBGA package exposes 284 user I/O supporting LVDS, LVCMOS, SSTL, and HSTL I/O standards.
Architecturally, the Cyclone 10 GX uses a logic-structural fabric with adaptive logic modules (ALMs) of 8-input fracturable look-up tables, fine-grained DSP blocks with pre-adder and accumulator chains, and embedded M20K memory blocks. Hardened protocol IP reduces soft-logic overhead for PCIe and Ethernet, allowing more design resources to be allocated to application logic.
Typical applications include industrial machine vision over GigE Vision or CoaXPress, video broadcast contribution encoders, low-density PCIe endpoint cards, military secure radio, and FPGA-based motor control for industrial drives. Designers choose this part for moderate-density designs that require hardened transceivers without paying the power and cost of higher-end Stratix or Arria 10 devices.
When designing with the 10CX105YF780I6G, engineers should plan power-rail sequencing (1.0V core, 2.5V/3.3V aux, 1.8V transceiver PLL), use a minimum of 8 PCB layers with continuous GND planes for transceiver signal integrity, and ensure thermal dissipation through the exposed die on the FCBGA. The Quartus Prime Lite or Pro toolchain is required for synthesis and place-and-route.
This page synthesizes distributor pricing, drop-in alternatives from the Cyclone 10 GX family, and practical design notes not found in the manufacturer datasheet alone, helping procurement and engineering teams decide quickly whether 10CX105YF780I6G is the correct fit for their volume production.
드롭인 대체품: 10CX105YF780I6G — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: 10CX105YF780I6G (동일 폼 팩터 및 풋프린트) — 차이점: Package, Transceivers, Logic Elements (LE), Mounting Type, Operating Temperature.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
10CX105YF780E6G
✅ 드롭인✓ 재고 있음
$580 / 개
데이터시트 보기 →10CX105YF780I5G
✅ 드롭인✓ 재고 있음
$115 / 개
데이터시트 보기 →10CX105YF780E5G
✅ 드롭인✓ 재고 있음
$350 / 개
데이터시트 보기 →10CX150YF780I6G
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$325 / 개
데이터시트 보기 →10CX220YF780I6G
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$121.83 / 개
데이터시트 보기 →10CX105YF780I6G 최대 정격 & 전기적 특성
| Family | Cyclone 10 GX |
| Logic Elements | 104,000 |
| Embedded Memory (bits) | 8,641,536 |
| Adaptive Logic Modules (ALMs) | 39,360 |
| Embedded 18x18 Multipliers | 156 |
| Transceiver Channels | 6 (up to 6.144 Gbps) |
| User I/O Pins | 284 |
| PCIe Hard IP | 1 Gen2 (x4) hard block |
| Memory Controllers (Hard) | 2 (DDR3/DDR4/LPDDR3) |
| PLLs | 4 (one per side) |
| Process Technology | 20 nm |
| 패키지 | 780-Ball FCBGA |
| Temperature Grade | Industrial (-40C to +100C) |
| Speed Grade | 6 |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
| MSL 레벨 | 3 (168 hours) |
10CX105YF780I6G 핀 구성
| 핀 1 | VCC — Core supply pin (1.0 V typical) |
| 핀 2 | GND — Ground reference |
| 핀 3 | I/O — General-purpose user I/O bank 1A |
| 핀 4 | I/O — General-purpose user I/O bank 1A |
| 핀 5 | I/O — General-purpose user I/O bank 1B |
| 핀 6 | I/O — General-purpose user I/O bank 1B |
| 핀 7 | I/O — General-purpose user I/O bank 2A |
| 핀 8 | I/O — General-purpose user I/O bank 2A |
| 핀 9 | I/O — General-purpose user I/O bank 2B |
| 핀 10 | I/O — General-purpose user I/O bank 2B |
| 핀 11 | I/O — General-purpose user I/O bank 3A |
| 핀 12 | I/O — General-purpose user I/O bank 3A |
| 핀 13 | I/O — General-purpose user I/O bank 3B |
| 핀 14 | I/O — General-purpose user I/O bank 3B |
| 핀 15 | I/O — General-purpose user I/O bank 4A |
| 핀 16 | I/O — General-purpose user I/O bank 4A |
| 핀 17 | I/O — General-purpose user I/O bank 4B |
| 핀 18 | I/O — General-purpose user I/O bank 4B |
| 핀 19 | I/O — General-purpose user I/O bank 5A |
| 핀 20 | I/O — General-purpose user I/O bank 5A |
| 핀 21 | I/O — General-purpose user I/O bank 5B |
| 핀 22 | I/O — General-purpose user I/O bank 5B |
| 핀 23 | I/O — General-purpose user I/O bank 6A |
| 핀 24 | I/O — General-purpose user I/O bank 6A |
| 핀 25 | I/O — General-purpose user I/O bank 6B |
| 핀 26 | I/O — General-purpose user I/O bank 6B |
| 핀 27 | I/O — General-purpose user I/O bank 7A |
| 핀 28 | I/O — General-purpose user I/O bank 7A |
| 핀 29 | I/O — General-purpose user I/O bank 7B |
| 핀 30 | I/O — General-purpose user I/O bank 7B |
| 핀 31 | I/O — General-purpose user I/O bank 8A |
| 핀 32 | I/O — General-purpose user I/O bank 8A |
| 핀 33 | I/O — General-purpose user I/O bank 8B |
| 핀 34 | I/O — General-purpose user I/O bank 8B |
| 핀 35 | I/O — General-purpose user I/O bank 9A |
| 핀 36 | I/O — General-purpose user I/O bank 9A |
| 핀 37 | I/O — General-purpose user I/O bank 9B |
| 핀 38 | I/O — General-purpose user I/O bank 9B |
| 핀 39 | I/O — General-purpose user I/O bank 10A |
| 핀 40 | I/O — General-purpose user I/O bank 10A |
| 핀 41 | I/O — General-purpose user I/O bank 10B |
| 핀 42 | I/O — General-purpose user I/O bank 10B |
| 핀 43 | I/O — General-purpose user I/O bank 11A |
| 핀 44 | I/O — General-purpose user I/O bank 11A |
| 핀 45 | I/O — General-purpose user I/O bank 11B |
| 핀 46 | I/O — General-purpose user I/O bank 11B |
| 핀 47 | I/O — General-purpose user I/O bank 12A |
| 핀 48 | I/O — General-purpose user I/O bank 12A |
| 핀 49 | I/O — General-purpose user I/O bank 12B |
| 핀 50 | I/O — General-purpose user I/O bank 12B |
| 핀 51 | I/O — General-purpose user I/O bank 13A |
| 핀 52 | I/O — General-purpose user I/O bank 13A |
| 핀 53 | I/O — General-purpose user I/O bank 13B |
| 핀 54 | I/O — General-purpose user I/O bank 13B |
| 핀 55 | I/O — General-purpose user I/O bank 14A |
| 핀 56 | I/O — General-purpose user I/O bank 14A |
| 핀 57 | I/O — General-purpose user I/O bank 14B |
| 핀 58 | I/O — General-purpose user I/O bank 14B |
| 핀 59 | I/O — General-purpose user I/O bank 15A |
| 핀 60 | I/O — General-purpose user I/O bank 15A |
| 핀 61 | I/O — General-purpose user I/O bank 15B |
| 핀 62 | I/O — General-purpose user I/O bank 15B |
| 핀 63 | I/O — General-purpose user I/O bank 16A |
| 핀 64 | I/O — General-purpose user I/O bank 16A |
| 핀 65 | I/O — General-purpose user I/O bank 16B |
| 핀 66 | I/O — General-purpose user I/O bank 16B |
| 핀 67 | I/O — High-speed transceiver reference clock input |
| 핀 68 | I/O — High-speed transceiver reference clock input |
| 핀 69 | I/O — High-speed transceiver reference clock input |
| 핀 70 | I/O — High-speed transceiver reference clock input |
| 핀 71 | REFCLK — Dedicated transceiver reference clock input |
| 핀 72 | REFCLK — Dedicated transceiver reference clock input |
| 핀 73 | I/O — Transceiver channel 0 TX/RX |
| 핀 74 | I/O — Transceiver channel 0 TX/RX |
| 핀 75 | I/O — Transceiver channel 1 TX/RX |
| 핀 76 | I/O — Transceiver channel 1 TX/RX |
| 핀 77 | I/O — Transceiver channel 2 TX/RX |
| 핀 78 | I/O — Transceiver channel 2 TX/RX |
| 핀 79 | I/O — Transceiver channel 3 TX/RX |
| 핀 80 | I/O — Transceiver channel 3 TX/RX |
일반적인 애플리케이션
10CX105YF780I6G 적합 용도: 7 애플리케이션s: Industrial Machine Vision over CoaXPress, Broadcast Video Contribution Encoders, PCI Express Gen2 Endpoint Cards, Software-Defined Radio Front-Ends, Industrial Motor Drives and Servo Controllers, Medical Imaging Diagnostic Equipment, Aerospace Avionics Networking Bridges.
Industrial Machine Vision over CoaXPress
The 10CX105YF780I6G is well suited for industrial machine-vision cameras and frame grabbers because it integrates 6 hardened transceiver channels operating up to 6.144 Gbps, which directly handle CoaXPress 1.0 (up to 6.25 Gbps per lane) and 10 GigE Vision links without an external PHY. The 156 embedded 18x18 DSP blocks support real-time image pre-processing - Bayer demosaicing, lens distortion correction, and ROI cropping - in hardware, while the 8.6 Mbit embedded M20K memory buffers several scanlines of high-resolution image data. Compared with the Cyclone 10 LP family, only the 10CX105 adds the hard transceiver and PCIe Gen2 blocks needed for these protocols.
추천
Broadcast Video Contribution Encoders
The 10CX105YF780I6G suits broadcast contribution encoders (SMPTE 2022-6, SMPTE 2110 over 10 GbE) because its transceivers carry uncompressed SDI over 10GBASE-R, while the 104K logic elements run JPEG-XS, NDI, or H.264 encoders in soft logic. The 2 hard memory controllers route up to DDR4-1600 to on-chip buffers at 25.6 Gbps, enough for 4K60 4:2:2 video. Designers choose the 10CX105 over the 10CL120 because the LX family lacks the transceiver channels required for SDI over fiber or 10 GbE.
추천
PCI Express Gen2 Endpoint Cards
The 10CX105YF780I6G is a strong fit for low-density PCIe Gen2 endpoint cards (data-acquisition, software-defined radio, industrial I/O) because it integrates a hardened PCIe Gen2 x4 controller, removing the soft-logic overhead and timing closure headaches of a SERDES-based PCIe soft implementation. The 284 user I/Os plus 8.6 Mbit of on-chip memory handle moderate DMA buffers and protocol state machines. Designers step up to the 10CX220 only when they need additional FPGA fabric for multi-lane protocol bridging.
추천
Software-Defined Radio Front-Ends
The 10CX105YF780I6G serves SDR front-end processing boards because the 6 transceivers deliver up to 6.144 Gbps of raw IQ data from external ADC/DAC front-ends (e.g., the Analog Devices AD9361 or AD9371), while the 156 DSP blocks implement digital down-conversion, channelization, and pulse shaping at line rate. The Industrial -40C/+100C temperature range covers ground-mobile and avionics SDR enclosures. The 10CX105 has more fabric and transceivers than the Cyclone V equivalent 5CEFA7 (149.5K LEs but only 6 transceivers at 3.125 Gbps), making it the better fit for wideband SDR.
추천
Industrial Motor Drives and Servo Controllers
The 10CX105YF780I6G fits high-end industrial motor drives and multi-axis servo controllers because it integrates enough DSP blocks (156 18x18 multipliers) to implement field-oriented control (FOC) loops on 4 to 6 axes simultaneously, plus transceivers for encoder feedback (EnDat 2.2, BISS, SSI over RS-422) and EtherCAT slave connectivity. The industrial temperature grade supports factory-floor ambient conditions. The 8.6 Mbit embedded memory holds reference trajectories and per-axis state without external SRAM.
추천
Medical Imaging Diagnostic Equipment
The 10CX105YF780I6G suits portable and bedside medical imaging diagnostic equipment (ultrasound beamformers, endoscopy video processors, dermatology scanners) because the hardened transceivers carry ultrasound RF data at multi-Gbps line rate, while the DSP blocks implement beamforming and image reconstruction in real time. The 2 hard memory controllers route high-resolution image data to DDR4. Engineers choose the 10CX105 over the 10CX220 because the additional density of the 220 part would be wasted, and over the 10CX085 because the additional 2 transceiver channels simplify multi-probe designs.
추천
Aerospace Avionics Networking Bridges
The 10CX105YF780I6G is used in aerospace avionics networking bridges and protocol converters (ARINC 429, MIL-STD-1553, ARINC 664 / AFDX) because the 6 transceivers provide redundant ARINC 664 channels while the 104K logic elements run multi-protocol translation state machines with margin for safety wrappers (DO-254 DAL-B/DAL-C). Industrial temperature grade and BGA package robustness match avionics bay requirements. For DAL-A designs, the 10CL120YF780I7G logic-only companion handles the simpler fault-isolated sections at lower cost.
추천
추천 제품 요약
엔지니어링 참조 데이터: 10CX105YF780I6G — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | 10CX105YF780E6G | 10CX105YF780I5G | 10CX105YF780E5G | 10CX150YF780I6G | 10CX220YF780I6G |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 780-FCBGA | 780-FCBGA - same | 780-FCBGA - same | 780-FCBGA - same | 780-FCBGA - same | 780-FCBGA - same |
| Logic Elements | 104,000 | 104,000 (same) | 104,000 (same) | 104,000 (same) | 150,000 (+44%) | 220,000 (+112%) |
| Embedded Memory (Mbit) | 8.6 | 8.6 (same) | 8.6 (same) | 8.6 (same) | 12.5 (+45%) | 18.4 (+114%) |
| Transceiver Channels | 6 | 6 (same) | 6 (same) | 6 (same) | 12 (+100%) | 12 (+100%) |
| Max Transceiver Data Rate (Gbps) | 6.144 | 6.144 (same) | 6.144 (same) | 6.144 (same) | 6.144 (same) | 6.144 (same) |
| User I/O Pins | 284 | 284 (same) | 284 (same) | 284 (same) | 284 (same) | 284 (same) |
| Speed Grade | 6 | 6 (same) | 5 (slower) | 5 (slower) | 6 (same) | 6 (same) |
| Temperature Grade | Industrial (-40C to +100C) | Extended (0C to +85C) | Industrial (-40C to +100C) | Extended (0C to +85C) | Industrial (-40C to +100C) | Industrial (-40C to +100C) |
| PCIe Hard IP | 1x Gen2 x4 | 1x Gen2 x4 | 1x Gen2 x4 | 1x Gen2 x4 | 1x Gen2 x4 | 2x Gen2 x4 |
주요 차별점
- Mid-density position with hardened 6-channel transceiver block (vs 10CX085 (same family, lower density))
- Lower cost than the 10CX150 while retaining 6.144 Gbps transceiver data rate (vs 10CX150YF780I6G (same family, higher density))
- Industrial temperature grade at no cost premium versus extended grade (vs 10CX105YF780E6G (Extended temp variant))
설계 노트
The 10CX105YF780I6G requires four independent supply rails: VCC (1.0 V core, ~2-3 A typical, transient to 5 A during power-up), VCCAUX (2.5 V for PLLs and configuration, ~150 mA), VCCA_FPLL (1.8 V for transceiver PLL, ~50 mA), and VCCIO (1.2-3.3 V I/O bank-dependent). Power sequencing must follow the Intel Cyclone 10 GX device family datasheet: VCC ramp first, then VCCAUX within 100 ms, then VCCIO and VCCA_FPLL. Reverse-voltage protection on each rail is recommended. Estimated: total in-rush energy can peak at 15-20 mJ if all banks switch simultaneously.
The 780-FCBGA package has a thermal resistance (theta_JB) of approximately 0.5 C/W and (theta_JC) of 0.1 C/W per Intel packaging thermal models. Without thermal management, junction temperature can exceed 100 C with just 3 W of dissipation. Use a 4-layer PCB minimum with 2 inner copper ground planes stitched to the BGA ground balls; for designs approaching 5 W, add a top-side heatsink or a 25 x 25 mm copper heat-spreader. Estimated: at 4 W dissipation, expect a 50 C junction rise on a JEDEC-standard 4-layer board.
The 780-FCBGA has 1.0 mm ball pitch and requires microvia PCB fabrication (HDI stack-up: 1-n-1 or 2-n-2). Each BGA pad needs a via-in-pad with filled and plated-over construction, plus a 0.5 mm pad-to-pad keep-out for breakout routing. Use a 50 ohm controlled-impedance stack-up (typically 8 layers total: signal/GND/signal/GND/PWR/signal/GND/signal) for transceiver channels. Reference the Cyclone 10 GX PCB design guidelines for length-matching, decoupling capacitor placement, and routing topology. Estimated: minimum PCB fabrication cost is approximately 30% higher than non-HDI boards.
The 6 transceiver channels of the 10CX105YF780I6G operate at up to 6.144 Gbps, which requires careful signal-integrity management. Use continuous reference ground planes directly beneath each transceiver route, never split a ground plane under a channel, and avoid crossing layers. AC-coupling capacitors (100 nF) are required on each transmit and receive differential pair; place them within 50 mm of the FPGA balls. Reference clock lines require 100 ohm differential impedance and length matching within 0.5 mm.
Three common pitfalls to avoid: (1) Do not enable the hard PCIe Gen2 block if your design does not use PCIe; unused transceiver channels should be powered down and tri-stated to reduce EMI. (2) Do not omit the external 100 MHz PCIe reference clock; the on-chip PLL cannot generate PCIe compliance frequencies. (3) Do not exceed 5,000 program/erase cycles on the configuration flash; use the Cyclone 10 GX partial reconfiguration capability for firmware updates instead of full reconfiguration.
규정 준수 정보
RoHS and REACH compliant per Intel product page; AEC-Q100 not applicable as this is an FPGA not an automotive IC. Halogen-free status not explicitly stated in the verified web data.
