EP1K100FC484-1N - 100K Gate ACEX-1K FPGA 333 I/O 484-FBGA | Intel
부품 번호: EP1K100FC484-1N ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $78.5 | $78.50 |
| 10 | $72 | $720.00 |
| 100 | $65.5 | $6,550.00 |
| 250 | $61.25 | $15,312.50 |
| 500 | $58.4 | $29,200.00 |
EP1K100FC484-1N 개요
A Field Programmable Gate Array (FPGA) is a type of integrated circuit containing an array of programmable logic blocks, interconnect, and I/O cells that the designer configures after manufacture. FPGAs sit in the broader hierarchy of programmable logic devices (PLDs) -> FPGAs -> SRAM-based FPGAs -> ACEX-1K family -> Intel (formerly Altera) programmable logic portfolio. They are used to implement custom digital logic, glue logic, state machines, DSP pipelines, and bus interfaces when an ASIC is too costly or when time-to-market is critical.
Key features of the EP1K100FC484-1N include 333 user I/O pins (the largest I/O count available in the ACEX-1K 100K family), 49 Kbits of dual-port embedded SRAM, hot-socketing support, multi-voltage I/O (1.5 V, 1.8 V, 2.5 V, 3.3 V LVTTL/LVCMOS), 4 phase-locked loops, and JTAG-based in-system programmability via IEEE 1149.1 boundary scan. The device supports the Quartus II design toolchain (legacy) for synthesis, place-and-route, and bitstream generation.
Architecturally, the ACEX-1K combines a fine-grained Logic Array Block (LAB) fabric with coarse-grained Embedded Array Blocks (EABs) for memory-intensive functions such as CAMs, RAMs, and ROMs. Each EAB can be configured as 4,096 bits of RAM and supports true dual-port operation. The I/O ring supports LVDS, SSTL, and GTL signaling in addition to standard LVTTL/LVCMOS, enabling direct interfacing with DDR SDRAM and high-speed backplane transceivers.
Typical applications include telecom line cards, industrial data acquisition, networking routers, low-cost ASIC prototyping, and PCI bridge implementations. The wide I/O count also makes it suitable for video processing front-ends, custom peripheral controllers, and legacy system upgrades where 5 V-tolerant or multi-voltage translation is required.
When designing with this device, note that the EP1K100FC484-1N is in the -1N speed grade (medium speed) and the commercial 0 °C to 70 °C operating range. Bitstream configuration requires a serial configuration EPROM (EPCS) or JTAG download. Multi-voltage I/O banks must each be supplied independently.
This page synthesizes distributor pricing, same-brand drop-in alternatives within the ACEX-1K family, and practical FPGA design notes not found in the legacy Altera datasheet, including migration guidance to Cyclone-series devices for new designs.
드롭인 대체품: EP1K100FC484-1N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP1K100FC484-1N (동일 폼 팩터 및 풋프린트) — 차이점: Process Technology, Configuration Method, Speed Grade, Package, Operating Temperature.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP1K100FC484-1
✅ 드롭인✓ 재고 있음
$52.1 / 개
데이터시트 보기 →EP1K100FC484-2N
✅ 드롭인✓ 재고 있음
$58.4 / 개
데이터시트 보기 →EP1K100FI484-2
✅ 드롭인✓ 재고 있음
$118 / 개
데이터시트 보기 →EP1K100FC484-3
✅ 드롭인✓ 재고 있음
$52.5 / 개
데이터시트 보기 →EP1K100EFI484-2
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$67.5 / 개
데이터시트 보기 →EP1K100FC484-2NGZ
✅ 드롭인✓ 재고 있음
$52 / 개
데이터시트 보기 →EP1K100FC484-1N 최대 정격 & 전기적 특성
| Series | ACEX-1K |
| Manufacturer | Intel (formerly Altera) |
| Logic Elements / Cells | 4,992 |
| Number of LABs/CLBs | 624 |
| Total RAM Bits | 49,152 |
| Number of I/O | 333 |
| Number of Gates | 100,000 |
| Voltage - Supply | 2.375 V to 2.625 V (core, 2.5 V nominal) |
| 동작 온도 | 0 °C to +70 °C (commercial) |
| 실장 유형 | Surface Mount |
| 패키지 / 케이스 | 484-BBGA (FineLine BGA) |
| Technology | 0.22 µm CMOS |
| Speed Grade | -1N (medium) |
| Max Clock Frequency | 333.33 MHz |
| Configuration Method | SRAM-based, JTAG / serial EPROM |
| Embedded Memory Type | EAB (4 blocks, dual-port SRAM) |
| RoHS 상태 | Non-compliant (legacy product) |
| MSL 레벨 | 3 |
EP1K100FC484-1N 484-bbga (fineline bga) 핀 구성 가이드
EP1K100FC484-1N(484-bbga (fineline bga) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EP1K100FC484-1N.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EP1K100FC484-1N 적합 용도: 6 애플리케이션s: Telecom Line Card Interface Logic, Industrial Data Acquisition Front-End, Legacy ASIC Prototyping and Emulation, PCI / cPCI Bridge and Peripheral Controller, Video Processing Front-End (LCD / Camera Pipeline), Network Router / Switch Glue Logic.
Telecom Line Card Interface Logic
The EP1K100FC484-1N's 333 user I/Os and 49 Kbits of dual-port embedded SRAM make it well suited to telecom line-card interface logic, where parallel bus gluing and time-slot switching are required. The device's LVTTL/LVCMOS multi-voltage I/O banks interface directly to TDM framers and serializer/deserializer chips at 1.8 V, 2.5 V, or 3.3 V without external translators. The 624 LABs/CLBs provide enough logic capacity for HDLC controllers, framer back-pressure logic, and per-channel state machines across 32–64 E1/T1 ports. The 4 EABs hold per-channel elastic buffers and look-up tables for tone generation. Operating at 0–70 °C and supporting commercial telecom chassis thermal envelopes, the -1N speed grade handles 333 MHz system buses for backplane interconnect. Power sequencing must observe the 2.5 V core rail before any I/O bank ramps.
추천
Industrial Data Acquisition Front-End
In industrial data-acquisition front-ends the EP1K100FC484-1N serves as the central glue-logic and DSP pre-processing element, aggregating parallel ADC outputs, digital isolator channels, and fieldbus interfaces. The 4,992 logic elements implement FIR/IIR pre-filters, decimation stages, and protocol framing for Ethernet/IP, Profibus, or CANopen. The 333 I/Os comfortably absorb 16–24 channels of 16-bit parallel ADCs plus SPI/I2C control paths. Industrial designers typically pair this FPGA with external SRAM for sample buffering while leveraging the 49 Kbits of dual-port EAB memory for ping-pong DMA channels. Designers should note that for harsh industrial environments the EP1K100FI484-2 industrial-temperature variant is preferred over the -1N commercial grade.
추천
Legacy ASIC Prototyping and Emulation
Engineers use the EP1K100FC484-1N as a low-cost ASIC prototype vehicle because its 100,000-gate capacity maps cleanly onto many mid-complexity ASICs from the early 2000s. The 4 EABs emulate embedded SRAM macros, the 624 LABs implement random control logic, and the 333 I/Os let designers bring out full peripheral pin sets for bench characterization. Quartus II design-entry flows remain mature for ACEX-1K, including MegaWizard Plug-Ins for FIFOs, RAMs, and PLLs, enabling rapid iteration before committing to silicon. Compared to a fixed-function ASIC, the FPGA can be re-spun in hours and reused across multiple prototype builds. Engineers should budget configuration time and provision an EPCS configuration EPROM for standalone bench operation.
추천
PCI / cPCI Bridge and Peripheral Controller
The EP1K100FC484-1N is widely deployed as a PCI bridge in CompactPCI cards, motion-control boards, and instrumentation where it implements the 32-bit/33 MHz PCI target or master interface plus local bus control. Its 333 MHz internal logic and 4 EABs handle PCI transaction FIFOs, scatter-gather DMA descriptors, and mailbox registers. Multi-voltage I/O banks let the device directly interface legacy 5 V-tolerant peripherals on one bank and 3.3 V PCI on another. The 4,992 logic elements are sufficient for full PCI protocol plus custom register maps and interrupt controllers. Designers migrating legacy PCI designs should consider EP1C20F400C7 as a modern, low-power replacement but plan for pin-map rework.
추천
Video Processing Front-End (LCD / Camera Pipeline)
For video front-ends in security cameras, LCD controllers, and machine-vision pre-processors the EP1K100FC484-1N delivers the I/O count and dual-port SRAM needed for pixel-rate pipelines. The 4 EABs hold line buffers, color-space conversion matrices, and gamma-correction LUTs in dual-port mode for simultaneous read/write. The 333 I/Os accept 24-bit parallel RGB/YCbCr camera data plus control signals and drive LVDS or LVTTL panels with no external logic. Operating up to 333 MHz the device comfortably pipelines 640×480 @ 60 Hz or 800×600 @ 50 Hz with room for on-the-fly histogram and thresholding. Multi-voltage I/O simplifies direct interface to 1.8 V image sensors.
추천
Network Router / Switch Glue Logic
In network routers and managed switches the EP1K100FC484-1N serves as a custom glue-logic device between PHY/MAC chips, lookup TCAMs, and CPU management buses. Its 333 I/Os handle GMII/RGMII side-band signals, JTAG chains across the chassis, and front-panel LED drivers without external bus expanders. The 49 Kbits of embedded SRAM provides per-port counters and rate-limit buckets in dual-port mode, accessible simultaneously by the management CPU and forwarding engine. The device's JTAG-based in-system programmability enables remote firmware updates via the management CPU, ideal for deployed networking gear. For new designs migrating beyond ACEX-1K, the EP1C12Q240C8 offers similar I/O count with active toolchain support.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP1K100FC484-1N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP1K100FC484-1 | EP1K100FC484-2N | EP1K100FI484-2 | EP1K100FC484-3 | EP1K100EFI484-2 | EP1K100FC484-2NGZ |
|---|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 484-BBGA | 484-BBGA - same | 484-BBGA - same | 484-BBGA - same | 484-BBGA - same | 484-BBGA - same | 484-BBGA - same |
| Logic Elements | 4,992 | 4,992 | 4,992 | 4,992 | 4,992 | 4,992 | 4,992 |
| User I/O | 333 | 333 | 333 | 333 | 333 | 333 | 333 |
| Speed Grade | -1N | -1 | -2N | -2 | -3 | -2 | -2N |
| Operating Temperature | 0 °C to +70 °C (commercial) | 0 °C to +70 °C | 0 °C to +70 °C | -40 °C to +100 °C (industrial) | 0 °C to +70 °C | -40 °C to +100 °C (industrial) | 0 °C to +70 °C |
| Total RAM Bits | 49,152 | 49,152 | 49,152 | 49,152 | 49,152 | 49,152 | 49,152 |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
주요 차별점
- Highest I/O density in the ACEX-1K family (vs EP1K100FC256-3N)
- Available lead-free / RoHS-compliant assembly (vs EP1K100FC484-1 (without N suffix))
- Faster speed grade available as direct drop-in (vs EP1K100FC484-2N)
설계 노트
The EP1K100FC484-1N requires a 2.5 V core supply (2.375 V–2.625 V) plus independent I/O bank supplies. Decouple each VCCINT pin with 0.1 µF ceramic in parallel with 10 µF tantalum or polymer placed within 5 mm of the BGA balls. I/O banks (VCCIO) may be powered at 1.5 V, 1.8 V, 2.5 V, or 3.3 V — design constraint: an unused bank must still receive a valid VCCIO rail within the device's absolute maximum ratings. Estimated ICC (core) at 100% toggle rate and 333 MHz: 600 mA; at idle: ~150 mA. Budget at least 1.5 A total supply current with 20% derating.
The 484-FBGA package (1.0 mm ball pitch, FineLine BGA) requires a multi-layer PCB with at least 4 routing layers and microvia technology. Fan-out routing between BGA rows demands controlled-impedance traces (50 Ω single-ended) for LVDS/LVTTL outputs. Place the configuration EPROM (EPCS1/EPCS4) within 50 mm of the FPGA DATA0/DCLK/nCONFIG/nSTATUS pins and route them with matched lengths (delta < 2 mm). Provide a low-impedance ground plane directly under the BGA and stitch ground vias around the perimeter every 5 mm to reduce SSO noise. JTAG chain TCK must be length-matched to within ±1 inch across all devices in the chain.
Do not use Quartus Prime (version 9.1 and later) — ACEX-1K device support was removed in Quartus II 9.1. Use Quartus II 9.0 or earlier, or Max+Plus II, for compilation. Do not exceed the 2.625 V absolute maximum on VCCINT or damage is permanent. Configuration bitstreams are SRAM-based: the FPGA loses its design on power-down and must be re-configured from an EPCS EPROM or JTAG on every power-up. The -1N speed grade is commercial temperature only; for industrial environments substitute EP1K100FI484-2 or EP1K100EFI484-2, which are pin-compatible but characterized over -40 °C to +100 °C.
Estimated: the EP1K100FC484-1N dissipates approximately 1.5 W at 100% utilization and 333 MHz (P ≈ C·V²·f·α). Junction temperature rise with the 484-FBGA package is typically θJA = 11 °C/W on a 4-layer JEDEC test board, giving a 16 °C rise at 1.5 W. The commercial 0 °C to +70 °C operating range can be met with this thermal envelope provided the PCB has a continuous ground/power plane stack-up. For designs operating near the upper temperature limit, consider forced airflow or a heat-spreader copper pour over the BGA. Industrial variants (-2, -3 grades with 'I' suffix) have higher θJA due to extended temperature characterization.
규정 준수 정보
The EP1K100FC484-1N is the lead-free (RoHS-compliant) assembly variant of the ACEX-1K 100K family. Per Intel CMRT filings, conflict-minerals status is compliant. REACH compliance is declared by franchised distributors; halogen-free status is not specified in available data. AEC-Q100 is not applicable (FPGA is not an automotive-qualified IC under ACEX-1K family documentation).