EPM9560RI208-10 - 12K-Gate MAX 9000 CPLD, 10ns, 208-Pin RQFP
부품 번호: EPM9560RI208-10 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $95 | $95.00 |
| 10 | $86.5 | $865.00 |
| 100 | $78.2 | $7,820.00 |
| 250 | $72.4 | $18,100.00 |
| 500 | $67.8 | $33,900.00 |
EPM9560RI208-10 개요
A Complex Programmable Logic Device (CPLD) is a non-volatile, instant-on programmable logic device that combines multiple PAL-like macrocell blocks connected through a central programmable interconnect array (PIA). CPLDs sit between small SPLDs/GALs and large SRAM-based FPGAs in the programmable logic hierarchy: they offer deterministic 10 ns-class pin-to-pin timing, ISP via JTAG, and zero-configuration boot time, making them ideal for glue logic, bus decoding, and control-plane state machines. The MAX 9000 family extends the MAX 7000 architecture to higher densities by tiling more Logic Array Blocks (LABs) onto a unified PIA fabric.
Key features of the EPM9560RI208-10 include the 10 ns tPD speed grade, 560 macrocells distributed across LABs, 212 user I/O pins (typical for the 208-RQFP package), in-system programmability via the IEEE 1149.1 (JTAG) interface, 5.0 V VCCINT operation, and a programmable power-saving mode that reduces Icc by up to 50 % on unused macrocells. The 208-pin RQFP package provides generous board-routing room for legacy 5 V designs that have long since moved off SOIC/QFN footprints.
Architecturally, the device integrates a global PIA, multiple LABs each containing 16 macrocells, I/O control blocks, and four dedicated input pins that feed the global clock/clear network. The EEPROM configuration cell supports 100 erase/program cycles and is retained for at least 10 years per the legacy MAX 9000 datasheet. Boundary-scan JTAG, an open-drain ISP interface, and PCI-compliant I/O make the part a common choice for 5 V bus-interface bridges.
Typical applications include 5 V PCI bus interface glue logic, address decoding and wait-state generation in 68k/8051/x86 embedded systems, industrial motor-control state machines, and legacy telecommunications backplane controllers. Engineers often place the EPM9560RI208-10 between an asynchronous SRAM bank and a microcontroller to implement programmable timing, glue logic, or bus-width adapters.
When designing with this device, observe the legacy 5 V I/O tolerance: it cannot be directly interfaced to 3.3 V logic without external level shifters or bus switches, and the 208-pin RQFP requires a generous PCB land pattern. Verify timing with the Quartus II legacy support package, since newer Quartus releases target modern Cyclone/MAX V families. This page consolidates distributor pricing and parametric data not always presented on a single manufacturer page.
드롭인 대체품: EPM9560RI208-10 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EPM9560RI208-10 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature, In-System Programmability, Configuration Memory, Architecture.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EPM9560RI208-15
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$20.1 / 개
데이터시트 보기 →EPM9560RI208-20
✅ 드롭인✓ 재고 있음
$21.1 / 개
데이터시트 보기 →EPM9560ARI208-10
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →EPM7256SRI208-10
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$27.2 / 개
데이터시트 보기 →EPM9320RI208-20
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$18.95 / 개
데이터시트 보기 →EPM9560RI208-10 최대 정격 & 전기적 특성
| Family | MAX 9000 |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Usable Gates | 12,000 |
| Macrocells | 560 |
| Pin-to-Pin Delay (tPD) | 10 ns |
| Maximum Counter Frequency | 144 MHz |
| Supply Voltage (VCCINT) | 5.0 V |
| User I/O Pins | 212 (typical for 208-RQFP package) |
| 패키지 | 208-pin RQFP (Power Quad Flat Pack) |
| 실장 유형 | Surface Mount |
| 동작 온도 | -40 °C to +85 °C (Industrial) |
| Programming Interface | IEEE 1149.1 (JTAG) / ISP |
| Configuration Memory | EEPROM, 100 erase/program cycles |
| RoHS 상태 | ROHS3 Compliant |
| 습도 민감도 레벨 (MSL) | 3 (168 Hours) |
| Lead Time | 1-7 days (per fpgalink listing) |
EPM9560RI208-10 208-pin rqfp (power quad flat pack) 핀 구성 가이드
EPM9560RI208-10(208-pin rqfp (power quad flat pack) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EPM9560RI208-10.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EPM9560RI208-10 적합 용도: 6 애플리케이션s: 5 V PCI Bus Interface Glue Logic, Embedded Bus Address Decoding & Wait-State Generation, Industrial Motor Control State Machines, Legacy Telecommunications Backplane Controllers, Test & Measurement Instrument Front-Ends, Military/Aerospace Legacy Avionics Interfaces.
5 V PCI Bus Interface Glue Logic
The EPM9560RI208-10's 5.0 V TTL-compatible I/O banks and 10 ns tPD make it a strong fit for PCI bus interface glue logic on legacy motherboards and add-in cards. It can implement target/initiator state machines, address decoding, command-handling, and wait-state generation in a single non-volatile device that boots instantly without external flash. With 560 macrocells and 212 user I/Os, the part can handle full 32-bit/33 MHz PCI decoder/arbiter logic. Unlike SRAM-based FPGAs, the EEPROM-backed configuration means no configuration-PROM is required and there is no boot latency, critical for systems that must respond to bus enumeration within the PCI spec's 2^15 clock budget.
추천
Embedded Bus Address Decoding & Wait-State Generation
The EPM9560RI208-10 excels at 68k, 8051, and x86 embedded-system glue logic, where it provides address decoding, chip-select generation, and programmable wait-state insertion between CPU and SRAM/ROM/Peripheral banks. The 10 ns tPD is fast enough to insert a single wait state on a 50 MHz bus while still meeting CPU-to-memory timing. With 560 macrocells, designers can implement a full address decoder plus multiple peripheral chip selects in one device. The non-volatile EEPROM configuration eliminates boot ROM requirements common to SRAM-FPGA designs.
추천
Industrial Motor Control State Machines
Industrial motor-control and process-control boards commonly deploy the EPM9560RI208-10 for deterministic PWM generation, fault-interrupt handling, and stepper/servo sequencer logic. Its industrial -40 °C to +85 °C operating range suits factory-floor environments, while the 10 ns tPD allows closed-loop control loops well under 1 µs. The 5 V I/O tolerance interfaces directly to legacy gate drivers and 24 V optocoupler inputs through resistive dividers. Engineers pair this CPLD with a microcontroller to offload time-critical control from the MCU, freeing CPU cycles for communication stacks.
추천
Legacy Telecommunications Backplane Controllers
Telecommunications backplanes in legacy T1/E1, SDH/SONET, and central-office switching equipment rely on 5 V CPLDs for bus arbitration, framing, and alarm-collection logic - exactly the role the EPM9560RI208-10 was designed for. Its instant-on EEPROM configuration means the system is operational within milliseconds of power-up, critical for telecom availability targets. The 208-RQFP package provides the mechanical robustness needed for backplane insertion, and the JTAG boundary-scan interface simplifies board-test fixtures for high-density backplane assemblies.
추천
Test & Measurement Instrument Front-Ends
Bench-top oscilloscopes, logic analyzers, and protocol testers often use the EPM9560RI208-10 to implement front-panel multiplexing, trigger routing, and channel-switching matrices. The deterministic 10 ns timing and 144 MHz counter frequency allow precise trigger-arming logic, while the 560 macrocells handle complex pattern-detection state machines. The 208-RQFP package is large enough to route high-impedance analog front-end signals around digital switching noise, an important consideration in mixed-signal test instruments. JTAG boundary-scan simplifies board bring-up and rework on densely populated test-instrument PCBs.
추천
Military/Aerospace Legacy Avionics Interfaces
The EPM9560RI208-10's industrial temperature range and 5 V tolerance have made it a long-standing choice for legacy military and avionics interface cards such as MIL-STD-1553 bridges, ARINC 429 receivers, and discrete I/O concentrators. The instant-on EEPROM configuration is preferred over SRAM FPGAs for safety-critical applications where configuration-bit errors are unacceptable. The 208-RQFP ceramic-windowed package variant supports UV erasure for prototype and radiation-tolerant builds, although the standard plastic RQFP is more common in commercial-off-the-shelf subsystems.
추천
추천 제품 요약
엔지니어링 참조 데이터: EPM9560RI208-10 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EPM9560RI208-15 | EPM9560RI208-20 | EPM9560ARI208-10 | EPM7256SRI208-10 | EPM9320RI208-20 |
|---|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel | Intel |
| Package | 208-RQFP | 208-RQFP - same | 208-RQFP - same | 208-RQFP - same | 208-RQFP - same | 208-RQFP - same |
| Family | MAX 9000 | MAX 9000 - same | MAX 9000 - same | MAX 9000 - same | MAX 7000S | MAX 9000 |
| Macrocells | 560 | 560 | 560 | 560 | 256 (-54%) | 320 (-43%) |
| Pin-to-Pin Delay (tPD) | 10 ns | 15 ns | 20 ns | 10 ns | 10 ns | 20 ns |
| Supply Voltage (VCCINT) | 5.0 V | 5.0 V | 5.0 V | 5.0 V | 5.0 V (with 3.3 V multi-volt I/O) | 5.0 V |
| Configuration Memory | EEPROM | EEPROM | EEPROM | EEPROM | EEPROM | EEPROM |
| Lifecycle Status | NRND | NRND | NRND (last buy per DigiKey listing) | NRND | NRND | NRND |
주요 차별점
- Highest-density 5 V CPLD in 208-RQFP package (vs EPM7256SRI208-10)
- Fastest speed grade in 208-RQFP MAX 9000 family (vs EPM9560RI208-20)
- Same-family 5 V operation with 212 user I/Os (vs MAX V 5M570ZT100)
설계 노트
The EPM9560RI208-10 operates from a single 5.0 V VCCINT supply; the I/O banks are 5 V TTL-compatible but not 5 V tolerant for 3.3 V inputs - direct connection to 3.3 V logic can damage inputs over time. Use external bus switches (e.g., 74CBTD3384 or SN74CB3T3384) or resistor dividers when interfacing to 3.3 V devices. Decoupling: place one 0.1 µF ceramic per VCC pin pair and a single bulk 10 µF tantalum at the supply entry, per MAX 9000 datasheet power-supply recommendations.
Estimated: at 5.0 V VCCINT, 560 macrocells switching at full internal frequency (~144 MHz) draws approximately 250-300 mA Icc, dissipating 1.25-1.5 W in the 208-RQFP package. The RQFP-208 has theta_JA of roughly 35-40 °C/W on a standard JEDEC 4-layer test board, giving a junction temperature rise of 44-60 °C above ambient. For natural-convection designs, derate VCCINT to 4.75 V at 85 °C ambient or add a small clip-on heatsink. Estimated input values: 560 macrocells, 144 MHz, 5.0 V, 35 °C/W θJA.
The 208-pin RQFP has a 0.5 mm lead pitch and a large 28×28 mm body. Provide at least 4 mm of copper-pour keep-out around the package for rework, and use NSMD (non-solder-mask-defined) pads with 0.15 mm copper-to-mask clearance for reliable fine-pitch assembly. Route all four dedicated global-clock pins (GCLK1-GCLK4) on the inner PCB layers with ground-plane shielding to control skew. The exposed-pad variants of the MAX family do not exist for this package; thermal dissipation is through peripheral leads only.
Pitfall 1: newer Quartus versions (14.0+) do not include MAX 9000 device support out of the box - install the legacy MAX 9000 device files or use MAX+PLUS II 10.x. Pitfall 2: the 208-RQFP pinout differs from the 240-RQFP used on larger MAX 9000 devices; never assume pin-compatibility between packages. Pitfall 3: PCI compliance requires 5 V signaling levels; the part's 5 V I/O supports this directly. Pitfall 4: the EEPROM configuration has only 100 erase/program cycles minimum - do not use the ISP interface as a debugging scratch area.
Route the four global clocks (GCLK1-GCLK4) with matched length (within 200 mils of each other) and a continuous ground reference plane beneath. Use 33 Ω series-termination resistors on clock outputs driving long traces or backplane connectors. The MAX 9000 has a programmable slew-rate control on each I/O pin - enable slow slew rate on switching I/Os near analog or RF sections to reduce ground bounce by approximately 50 %. Reference: MAX 9000 datasheet, Application Note 75 (Altera).
규정 준수 정보
ROHS3 Compliant per fpgalink product detail page. REACH and conflict-minerals status not stated in available data. Not AEC-Q100 qualified (consumer/industrial use).