K9XXG08U0M - 8Gbit SLC NAND Flash 3.3V | Samsung
부품 번호: K9XXG08U0M ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $8.5 | $8.50 |
| 10 | $7.8 | $78.00 |
| 100 | $6.9 | $690.00 |
| 500 | $6.2 | $3,100.00 |
| 1,000 | $5.6 | $5,600.00 |
K9XXG08U0M 개요
NAND flash is a non-volatile memory technology in which storage cells are connected in series, dramatically reducing cell size and cost per bit compared to NOR flash. Within the memory hierarchy, NAND flash sits between volatile DRAM and masked ROM, providing persistent bulk storage. It is the foundational technology for SSDs, eMMC, USB drives, and embedded storage subsystems, and is accessed through a command-address-data multiplexed 8-bit bus.
Key features of the K9XXG08U0M family include an 8-bit parallel I/O interface, a page-based organization (typical page size for this class is 4KB including spare), block-based erase operation, and the industry-standard Samsung/ONFI-compatible command set shared across the K9F/K9K/K9W generations. The 2.7V to 3.6V supply range supports both 3.3V and 3.0V rails, and the TSOP-I 48 package suits hand-solderable and reflow assembly.
The K9K8G08U0M variant is SLC (single-level cell) based, offering the highest endurance and reliability in the family; the K9G8G08U0M variant is MLC (multi-level cell), doubling effective density economics with lower endurance. Page read at 20 microseconds and typical program/erase performance make the family suitable for solid-state bulk storage.
Typical applications include solid-state drives, USB flash drives, memory cards, set-top boxes, industrial data loggers, and embedded boot storage for legacy platforms requiring parallel NAND.
Design consideration: NAND flash requires external error correction code (ECC) - the host controller must implement ECC over the spare area, and bad blocks identified in the factory-marked table must be managed by a wear-leveling layer.
This page synthesizes datasheet data, distributor cross-references, and drop-in alternative analysis for the K9XXG08U0M family not found on any single manufacturer page.
드롭인 대체품: K9XXG08U0M — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: K9XXG08U0M (동일 폼 팩터 및 풋프린트) — 차이점: Package, Organization, Density, Memory Type, Cell Type.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
K9K8G08U0M-PCB0
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
K9WAG08U1M
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
K9XXG08UXM
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →K9G8G08U0M-PCB0
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
K9KAG08U0M-PCK0
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
K9XXG08U0M 최대 정격 & 전기적 특성
| 메모리 유형 | NAND Flash |
| Density | 8 G-bit |
| 메모리 구성 | 1G x 8 bit |
| Spare Area | 256 M-bit (per K9K8G08U0M) |
| 공급 전압 | 2.7 V to 3.6 V (3.3V device) |
| 인터페이스 | 8-bit parallel NAND (command/address/data multiplexed) |
| Page Read Time | 20 us |
| 패키지 | 48-pin TSOP-I |
| 실장 유형 | Surface Mount |
| Access Interface Standard | Samsung legacy NAND command set |
| Bad Block Management | Factory bad block marking (host-managed ECC required) |
| Cell Type | SLC (K9K8G08U0M) / MLC (K9G8G08U0M variants) |
| ECC Requirement | External ECC by host controller |
K9XXG08U0M 48-pin tsop-i 핀 구성 가이드
K9XXG08U0M(48-pin tsop-i 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: K9XXG08U0M.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
K9XXG08U0M 적합 용도: 6 애플리케이션s: Solid-State Storage Modules, Embedded Boot and Code Storage, Industrial Data Loggers, Set-Top Boxes and Consumer Electronics, USB Flash Drives and Memory Cards, Legacy Platform Repair and Sustainment.
Solid-State Storage Modules
The K9XXG08U0M family was designed by Samsung as the most cost-effective solid-state storage solution of its generation, with the K9K8G08U0M's 8G-bit SLC array and 256M-bit spare area enabling reliable FTL (flash translation layer) implementations. In an SSD or storage module, the NAND connects to a controller through the 8-bit multiplexed bus with 20 us page reads providing moderate sustained throughput. The SLC variant's high program/erase endurance made it the preferred choice for write-intensive storage. Because the parts are obsolete, this application today is limited to legacy module repair and re-qualification of existing designs rather than new development.
추천
Embedded Boot and Code Storage
Industrial and consumer embedded platforms of the TSOP-I NAND era used the K9XXG08U0M family to store boot code, firmware images, and configuration data. The 2.7V to 3.6V supply range matches standard 3.3V microcontroller and SoC rails, eliminating level shifting. Page reads of 20 us allow boot loaders to fetch code quickly even from slow legacy buses. Because parallel NAND is not execute-in-place friendly, a two-stage boot scheme is typical: a small NOR or mask ROM first-stage loader copies the main image from NAND to DRAM. The host controller must implement 1-bit ECC (SLC) plus factory bad-block table handling at every power-up.
추천
Industrial Data Loggers
Data loggers in factory automation, energy metering, and vehicle telemetry benefit from the K9K8G08U0M's SLC endurance, which typically withstands far more program/erase cycles than MLC alternatives like the K9G8G08U0M-PCB0. The wide 2.7V to 3.6V operating range tolerates noisy industrial 3.3V rails, and the 48-pin TSOP-I package survives vibration better than socketed media. A wear-leveling FTL spreads writes across the 8G-bit array while the spare area holds ECC parity per sector. Designers must reserve margin blocks for runtime bad-block replacement, since industrial write volumes accelerate block wear.
추천
Set-Top Boxes and Consumer Electronics
Set-top boxes, DVD recorders, and digital cameras of the mid-2000s used the K9XXG08U0M family to buffer EPG data, record media, and store channel tables. The 1G x 8 bit organization with a 4KB-class page size maps efficiently to file systems used by these devices, and the 8-bit NAND interface integrates directly with consumer SoCs of that era that embedded a native NAND controller with hardware ECC. The 3.3V device classification (2.7V to 3.6V) simplifies the power tree. Replacement sourcing today should favor the pin-compatible K9WAG08U1M for capacity-matched repairs of DVR-class platforms.
추천
USB Flash Drives and Memory Cards
Samsung explicitly positioned the K9K8G08U0M NAND cell as the most cost-effective solution for solid-state applications including USB drives and flash cards. In a USB drive, the NAND pairs with a bridge controller (e.g., generic USB-to-NAND chips) that handles ECC, bad-block mapping, and wear leveling over the 8-bit bus; 20 us page reads and parallel page programming deliver the throughput needed for USB 2.0 speeds. The TSOP-I 48 package fits compact PCB layouts. Cost-optimized revisions substituted the MLC K9G8G08U0M-PCB0, accepting lower endurance in exchange for density economics.
추천
Legacy Platform Repair and Sustainment
A dominant current use of the K9XXG08U0M family is last-time-buy and repair sourcing for aging industrial equipment, medical devices, and telecom hardware whose designs cannot be changed. Because the parts are obsolete, engineers must qualify pin-compatible family members - K9K8G08U0M-PCB0, K9WAG08U1M, or K9XXG08UXM - all sharing the 48-pin TSOP-I footprint and Samsung legacy command set per the shared family datasheet. Verification should focus on timing parameter deltas and block geometry tables in the FTL configuration rather than hardware redesign, keeping the replacement truly drop-in at board level.
추천
추천 제품 요약
엔지니어링 참조 데이터: K9XXG08U0M — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | K9K8G08U0M-PCB0 | K9WAG08U1M | K9XXG08UXM | K9G8G08U0M-PCB0 | K9KAG08U0M-PCK0 |
|---|---|---|---|---|---|---|
| Package | 48-pin TSOP-I | 48-pin TSOP-I - same | 48-pin TSOP-I - same | 48-pin TSOP-I - same | 48-pin TSOP-I - same | 48-pin TSOP-I - same |
| Brand | Samsung Electronics | Samsung Electronics | Samsung Electronics | Samsung Electronics | Samsung Electronics | Samsung Electronics |
| Density | 8 G-bit (1G x 8) | 8 G-bit (1G x 8) | 16 G-bit class (2G x 8) | 8 G-bit class | 8 G-bit (1G x 8) | 32 G-bit class |
| Supply Voltage | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V (3.3V device) | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
| Lifecycle Status | Obsolete | Obsolete (broker stock) | Obsolete (broker stock) | Obsolete (broker stock) | Obsolete (broker stock) | Obsolete (broker stock) |
주요 차별점
- SLC endurance advantage (vs K9G8G08U0M-PCB0)
- Capacity-matched density for footprint reuse (vs K9WAG08U1M)
- Same-family die revision sourcing flexibility (vs K9XXG08UXM)
설계 노트
NAND flash never ships perfect: the K9K8G08U0M leaves the factory with valid bit blocks marked in the spare area of block 0 and subsequent invalid blocks. The host must scan the bad-block table at every power-up and must never erase a marked block - erasing destroys the marker permanently and converts a managed defect into data loss. Additionally, program operations must proceed strictly sequentially within a block; partial-page programming and random page order are prohibited and cause corrupt data.
Decouple VCC with at least 0.1 uF ceramic at each supply pin plus a 4.7 uF bulk capacitor per device. Bulk erase and multi-page programming draw current bursts that can droop a weak 3.3V rail below the 2.7V minimum, aborting program/erase mid-operation. If the supply is shared with a radio or motor load, sequence so NAND erase cycles do not coincide with peak loads, and consider a dedicated LDO or ferrite bead isolation for the memory rail.
On the 8-bit multiplexed bus, keep I/O0 through I/O7, CLE, ALE, CE, RE, and WE traces under 10 cm and matched in length where possible. The latch-based command/address interface is timing-sensitive: setup and hold relative to WE and RE rising edges must meet datasheet values across temperature. Add 22-33 ohm series resistors on WE and RE if ringing is observed, since over-shoot on these latches can falsely clock commands into the device.
NAND flash in standby draws negligible power, but sustained program/erase cycling in data-logging products raises die temperature. Estimated: at 15 mW average active power in a 48-pin TSOP-I (theta_JA approximately 90-110 C/W per typical TSOP-48 packages - verify in the datasheet), junction rise is under 2 C, so ambient rating - not self-heating - governs the operating temperature limit. Confirm the exact operating range in the manufacturer datasheet as it was not in the verified data.
규정 준수 정보
RoHS status not stated in verified web data. The -PCB0 packing-grade suffix on Samsung K9 parts of this era typically denotes RoHS-compliant lead-free production, but this must be confirmed from the official Samsung product page before relying on it.
