STM32F413ZHT3 - 100MHz Cortex-M4 MCU 1.5MB Flash 144-LQFP | STMicroelectronics
부품 번호: STM32F413ZHT3 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $14.92 | $14.92 |
| 10 | $13.43 | $134.30 |
| 100 | $11.65 | $1,165.00 |
| 500 | $10.5 | $5,250.00 |
| 1,000 | $9.18 | $9,180.00 |
STM32F413ZHT3 개요
What is a Cortex-M4 microcontroller? A Cortex-M4 microcontroller is a 32-bit RISC processor core designed by Arm Holdings for embedded applications, featuring a single-precision floating-point unit (FPU) and Digital Signal Processing (DSP) instructions. It sits within the broader taxonomy of microcontroller -> 32-bit MCU -> ARM Cortex-M family -> Cortex-M4 sub-family -> power management IC ecosystem. Cortex-M4 MCUs target applications requiring deterministic real-time control combined with signal processing, replacing combinations of 8/16-bit MCUs and external DSPs in compact BOMs.
Key features of the STM32F413ZHT3 include 1.5 MB of embedded Flash with read-while-write support, 320 KB of SRAM (including 4 KB of backup SRAM), a 100 MHz Cortex-M4F core with single-precision FPU, and a low-power RTC with sub-second accuracy. The device also includes a 4 KB backup register area, a true random number generator (TRNG), and cryptographic acceleration supporting AES-256, plus a USB 2.0 Full-Speed On-The-Go controller with internal PHY.
Architecturally, the STM32F413ZHT3 uses ST's 90 nm embedded Flash process, integrates an L1 cache to offset Flash wait-states at 100 MHz, and supports memory-mapped external memories through its Flexible Static Memory Controller (FSMC). The dual DFSDM blocks enable hardware sigma-delta demodulation for MEMS microphones and isolated current sensing, which is unusual in this MCU class.
Typical applications include industrial motor control (BLDC/PMSM via timers + DFSDM), building automation HMI panels, USB-powered measurement instruments, audio front-ends (USB Audio + DACs), and IoT gateways using the integrated USB OTG plus CAN bus. The wide 1.7 V to 3.6 V supply range also suits battery-powered designs with direct Li-Ion cell connection.
When designing with this part, consider that the 144-LQFP package has limited thermal headroom; at full 100 MHz operation with all peripherals active, expect around 120 mA core current. The DFSDM digital filter is a key advantage in audio and sensor applications but requires a separate sigma-delta modulator in the signal chain.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet. Engineers evaluating second sources for STMicroelectronics STM32F413ZHT3 should consider same-package and pin-compatible cross-references listed below.
드롭인 대체품: STM32F413ZHT3 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32F413ZHT3 (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Communication Interfaces, Core, Package, SRAM.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
STM32F413ZHJ6
✅ 드롭인✓ 재고 있음
$9.4 / 개
데이터시트 보기 →STM32F423ZHT6
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
STM32F407VGT6
✅ 드롭인✓ 재고 있음
$7.55 / 개
데이터시트 보기 →STM32F413ZHT3 최대 정격 & 전기적 특성
| Core | ARM Cortex-M4F with FPU and DSP |
| Maximum Clock Speed | 100 MHz |
| Core Mark Performance | 125 DMIPS |
| Flash Memory | 1.5 MB |
| SRAM | 320 KB (including 4 KB backup SRAM) |
| Operating Voltage Range | 1.7 V to 3.6 V |
| ADC | 1 x 12-bit, up to 2.4 MSPS |
| DAC | 2 x 12-bit |
| DFSDM | 2 digital filter blocks for sigma-delta modulators |
| USB | USB 2.0 OTG Full-Speed with internal PHY |
| Communication Interfaces | USART, SPI, I2C, CAN, USB OTG FS, SDMMC |
| 패키지 | 144-LQFP (20x20 mm) |
| I/O Count | 114 GPIO |
| 동작 온도 | -40C to +125C (industrial grade) |
| RoHS 상태 | Compliant |
STM32F413ZHT3 핀 구성
| 핀 1 | PE2 — GPIO PE2 / TRACECLK / FSMC_A23 |
| 핀 2 | PE3 — GPIO PE3 / TRACED0 / FSMC_A19 |
| 핀 3 | PE4 — GPIO PE4 / TRACED1 / FSMC_A20 |
| 핀 4 | PE5 — GPIO PE5 / TRACED2 / FSMC_A21 |
| 핀 5 | PE6 — GPIO PE6 / TRACED3 / FSMC_A22 |
| 핀 6 | VBAT — Battery backup power supply |
| 핀 7 | PC13 — GPIO PC13 / RTC_TAMP1 / RTC_OUT |
| 핀 8 | PC14 — GPIO PC14 / OSC32_IN |
| 핀 9 | PC15 — GPIO PC15 / OSC32_OUT |
| 핀 10 | VSS — Ground |
| 핀 11 | VDD — Digital power supply 1.7-3.6 V |
| 핀 12 | OSC_IN — HSE oscillator input |
| 핀 13 | OSC_OUT — HSE oscillator output |
| 핀 14 | NRST — Reset input, active low |
| 핀 15 | PC0 — GPIO PC0 / ADC1_IN10 |
| 핀 16 | PC1 — GPIO PC1 / ADC1_IN11 |
| 핀 17 | PC2 — GPIO PC2 / ADC1_IN12 |
| 핀 18 | PC3 — GPIO PC3 / ADC1_IN13 |
| 핀 19 | VREF+ — ADC positive reference voltage |
| 핀 20 | VDDA — Analog power supply |
| 핀 21 | PA0 — GPIO PA0 / WKUP / TIM2_CH1_ETR |
| 핀 22 | PA1 — GPIO PA1 / TIM2_CH2 |
| 핀 23 | PA2 — GPIO PA2 / TIM2_CH3 / USART2_TX |
| 핀 24 | PA3 — GPIO PA3 / TIM2_CH4 / USART2_RX |
| 핀 25 | VSS — Ground |
| 핀 26 | VDD — Digital power supply 1.7-3.6 V |
| 핀 27 | PA4 — GPIO PA4 / SPI1_NSS / DAC1_OUT |
| 핀 28 | PA5 — GPIO PA5 / SPI1_SCK / DAC2_OUT |
| 핀 29 | PA6 — GPIO PA6 / SPI1_MISO / TIM13_CH1 |
| 핀 30 | PA7 — GPIO PA7 / SPI1_MOSI / TIM14_CH1 |
| 핀 31 | PC4 — GPIO PC4 / ADC1_IN14 |
| 핀 32 | PC5 — GPIO PC5 / ADC1_IN15 |
| 핀 33 | PB0 — GPIO PB0 / TIM3_CH3 / ADC1_IN8 |
| 핀 34 | PB1 — GPIO PB1 / TIM3_CH4 / ADC1_IN9 |
| 핀 35 | PB2 — GPIO PB2 / BOOT1 |
| 핀 36 | PE7 — GPIO PE7 / FSMC_D4 |
| 핀 37 | PE8 — GPIO PE8 / FSMC_D5 |
| 핀 38 | PE9 — GPIO PE9 / FSMC_D6 |
| 핀 39 | PE10 — GPIO PE10 / FSMC_D7 |
| 핀 40 | PE11 — GPIO PE11 / FSMC_D8 |
| 핀 41 | PE12 — GPIO PE12 / FSMC_D9 |
| 핀 42 | PE13 — GPIO PE13 / FSMC_D10 |
| 핀 43 | PE14 — GPIO PE14 / FSMC_D11 |
| 핀 44 | PE15 — GPIO PE15 / FSMC_D12 |
| 핀 45 | PB10 — GPIO PB10 / I2C2_SCL / USART3_TX |
| 핀 46 | PB11 — GPIO PB11 / I2C2_SDA / USART3_RX |
| 핀 47 | VSS — Ground |
| 핀 48 | VDD — Digital power supply 1.7-3.6 V |
| 핀 49 | PB12 — GPIO PB12 / SPI2_NSS / I2S2_WS |
| 핀 50 | PB13 — GPIO PB13 / SPI2_SCK / I2S2_CK |
| 핀 51 | PB14 — GPIO PB14 / SPI2_MISO / TIM12_CH1 |
| 핀 52 | PB15 — GPIO PB15 / SPI2_MOSI / TIM12_CH2 |
| 핀 53 | PD8 — GPIO PD8 / FSMC_D13 |
| 핀 54 | PD9 — GPIO PD9 / FSMC_D14 |
| 핀 55 | PD10 — GPIO PD10 / FSMC_D15 |
| 핀 56 | PD11 — GPIO PD11 / FSMC_A16 |
| 핀 57 | PD12 — GPIO PD12 / FSMC_A17 |
| 핀 58 | PD13 — GPIO PD13 / FSMC_A18 |
| 핀 59 | PD14 — GPIO PD14 / FSMC_D0 |
| 핀 60 | PD15 — GPIO PD15 / FSMC_D1 |
| 핀 61 | PC6 — GPIO PC6 / TIM3_CH1 / USART6_TX |
| 핀 62 | PC7 — GPIO PC7 / TIM3_CH2 / USART6_RX |
| 핀 63 | PC8 — GPIO PC8 / TIM3_CH3 / SDMMC_D0 |
| 핀 64 | PC9 — GPIO PC9 / TIM3_CH4 / SDMMC_D1 |
| 핀 65 | PA8 — GPIO PA8 / TIM1_CH1 / USART1_CK |
| 핀 66 | PA9 — GPIO PA9 / TIM1_CH2 / USART1_TX |
| 핀 67 | PA10 — GPIO PA10 / TIM1_CH3 / USART1_RX |
| 핀 68 | PA11 — GPIO PA11 / CAN1_RX / USB_DM |
| 핀 69 | PA12 — GPIO PA12 / CAN1_TX / USB_DP |
| 핀 70 | PA13 — GPIO PA13 / SWDIO |
| 핀 71 | VSS — Ground |
| 핀 72 | VDD — Digital power supply 1.7-3.6 V |
| 핀 73 | PA14 — GPIO PA14 / SWCLK |
| 핀 74 | PA15 — GPIO PA15 / TIM2_CH1_ETR / SPI1_NSS |
| 핀 75 | PC10 — GPIO PC10 / UART4_TX / SDMMC_D2 |
| 핀 76 | PC11 — GPIO PC11 / UART4_RX / SDMMC_D3 |
| 핀 77 | PC12 — GPIO PC12 / UART5_TX / SDMMC_CK |
| 핀 78 | PD0 — GPIO PD0 / CAN1_RX / FSMC_D2 |
| 핀 79 | PD1 — GPIO PD1 / CAN1_TX / FSMC_D3 |
| 핀 80 | PD2 — GPIO PD2 / SDMMC_CMD / TIM3_ETR |
| 핀 81 | PD3 — GPIO PD3 / FSMC_CLK |
| 핀 82 | PD4 — GPIO PD4 / FSMC_NOE |
| 핀 83 | PD5 — GPIO PD5 / FSMC_NWE |
| 핀 84 | PD6 — GPIO PD6 / FSMC_NWAIT |
| 핀 85 | PD7 — GPIO PD7 / FSMC_NE1 |
| 핀 86 | PB3 — GPIO PB3 / SWO / TIM2_CH2 |
| 핀 87 | PB4 — GPIO PB4 / TIM3_CH1 |
| 핀 88 | PB5 — GPIO PB5 / TIM3_CH2 |
| 핀 89 | PB6 — GPIO PB6 / I2C1_SCL / USART1_TX |
| 핀 90 | PB7 — GPIO PB7 / I2C1_SDA / USART1_RX |
| 핀 91 | BOOT0 — Boot mode select |
| 핀 92 | PB8 — GPIO PB8 / TIM4_CH3 / I2C1_SCL |
| 핀 93 | PB9 — GPIO PB9 / TIM4_CH4 / I2C1_SDA |
| 핀 94 | PE0 — GPIO PE0 / TIM4_ETR |
| 핀 95 | PE1 — GPIO PE1 / FSMC_NBL0 |
| 핀 96 | VSS — Ground |
| 핀 97 | VDD — Digital power supply 1.7-3.6 V |
| 핀 98 | PF0 — GPIO PF0 / FSMC_A0 |
| 핀 99 | PF1 — GPIO PF1 / FSMC_A1 |
| 핀 100 | PF2 — GPIO PF2 / FSMC_A2 |
| 핀 101 | PF3 — GPIO PF3 / FSMC_A3 |
| 핀 102 | PF4 — GPIO PF4 / FSMC_A4 |
| 핀 103 | PF5 — GPIO PF5 / FSMC_A5 |
| 핀 104 | VSS — Ground |
| 핀 105 | VDD — Digital power supply 1.7-3.6 V |
| 핀 106 | PF6 — GPIO PF6 / TIM10_CH1 |
| 핀 107 | PF7 — GPIO PF7 / TIM11_CH1 |
| 핀 108 | PF8 — GPIO PF8 / TIM12_CH1 |
| 핀 109 | PF9 — GPIO PF9 / TIM13_CH1 |
| 핀 110 | PF10 — GPIO PF10 / TIM14_CH1 |
| 핀 111 | PF11 — GPIO PF11 / FSMC_NRAS |
| 핀 112 | PF12 — GPIO PF12 / FSMC_A6 |
| 핀 113 | PF13 — GPIO PF13 / FSMC_A7 |
| 핀 114 | PF14 — GPIO PF14 / FSMC_A8 |
| 핀 115 | PF15 — GPIO PF15 / FSMC_A9 |
| 핀 116 | PG0 — GPIO PG0 / FSMC_A10 |
| 핀 117 | PG1 — GPIO PG1 / FSMC_A11 |
| 핀 118 | PE2 — GPIO PE2 / FSMC_A23 |
| 핀 119 | PE3 — GPIO PE3 / FSMC_A19 |
| 핀 120 | PE4 — GPIO PE4 / FSMC_A20 |
| 핀 121 | PE5 — GPIO PE5 / FSMC_A21 |
| 핀 122 | PE6 — GPIO PE6 / FSMC_A22 |
| 핀 123 | VSS — Ground |
| 핀 124 | VDD — Digital power supply 1.7-3.6 V |
| 핀 125 | PG2 — GPIO PG2 / FSMC_A12 |
| 핀 126 | PG3 — GPIO PG3 / FSMC_A13 |
| 핀 127 | PG4 — GPIO PG4 / FSMC_A14 |
| 핀 128 | PG5 — GPIO PG5 / FSMC_A15 |
| 핀 129 | PG6 — GPIO PG6 / FSMC_INT2 |
| 핀 130 | PG7 — GPIO PG7 / FSMC_INT3 |
| 핀 131 | PG8 — GPIO PG8 |
| 핀 132 | VSS — Ground |
| 핀 133 | VDD — Digital power supply 1.7-3.6 V |
| 핀 134 | PC13 — GPIO PC13 / RTC_TAMP1 |
| 핀 135 | PA0 — GPIO PA0 / WKUP |
| 핀 136 | PA1 — GPIO PA1 |
| 핀 137 | PA2 — GPIO PA2 |
| 핀 138 | PA3 — GPIO PA3 |
| 핀 139 | VSS — Ground |
| 핀 140 | VDD — Digital power supply 1.7-3.6 V |
| 핀 141 | PA4 — GPIO PA4 |
| 핀 142 | PA5 — GPIO PA5 |
| 핀 143 | PB6 — GPIO PB6 |
| 핀 144 | PB7 — GPIO PB7 |
일반적인 애플리케이션
STM32F413ZHT3 적합 용도: 6 애플리케이션s: Industrial Motor Control (BLDC/PMSM), USB Audio Interface and DAC, Building Automation HMI Panel, USB-Powered Measurement Instrument, IoT Gateway with CAN and USB, Digital Sensor Hub with DFSDM.
Industrial Motor Control (BLDC/PMSM)
The STM32F413ZHT3 fits BLDC and PMSM motor control with its 100 MHz Cortex-M4F DSP extensions, advanced timer array (TIM1, TIM8 with complementary PWM), and dual DFSDM blocks for isolated current sensing. The 1.5 MB Flash and 320 KB SRAM handle field-oriented control (FOC) algorithms with sensorless observer routines. The 144-LQFP exposes enough pins for 3-phase PWM generation, Hall/encoder inputs, and CAN bus communication to a host controller.
추천
USB Audio Interface and DAC
The STM32F413ZHT3 serves as a USB Audio Class 2.0 device with internal PHY, streaming up to 24-bit/96 kHz audio to a paired external DAC. The dual 12-bit DACs and DFSDM blocks support microphone arrays and headphone monitoring. Cortex-M4F DSP extensions enable real-time EQ, mixing, and limiter algorithms in the same firmware loop.
추천
Building Automation HMI Panel
The 100 MHz Cortex-M4F and 1.5 MB Flash drive TFT LCD panels up to 480x272 through FSMC, while the 320 KB SRAM keeps double-buffered GUIs responsive. The 144-LQFP exposes 114 GPIO for capacitive touch sensing, RS-485 transceivers, and CAN bus to HVAC controllers. The low-power RTC with calendar and tamper detection suits battery-backed wall-mount operation.
추천
USB-Powered Measurement Instrument
The STM32F413ZHT3 operates from a USB 5 V rail with internal 3.3 V LDO regulation, providing a 1 MSPS 12-bit ADC plus two 12-bit DACs for analog front-end stimulus. The 1.5 MB Flash holds calibration tables and DSP filter coefficients for FFT/octave-band analysis. USB OTG Full-Speed with internal PHY eliminates the need for an external ULPI chip, reducing BOM cost for compact instruments.
추천
IoT Gateway with CAN and USB
The STM32F413ZHT3 aggregates sensor data from CAN 2.0B and RS-485 buses, then bridges to a host via USB or Ethernet (external PHY). The 1.5 MB Flash and 320 KB SRAM run a lightweight MQTT or Modbus gateway stack with local caching. The Cortex-M4F core handles TLS handshake and certificate parsing in software when needed.
추천
Digital Sensor Hub with DFSDM
The dual DFSDM blocks on the STM32F413ZHT3 connect to up to 8 sigma-delta MEMS microphones or isolated current-sense modulators, with hardware digital filtering. This eliminates the CPU overhead of bit-banging PDM streams and enables multi-channel beamforming or power-quality monitoring. The 144-LQFP pin count supports external modulator clock distribution.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32F413ZHT3 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32F413ZHJ6 | STM32F423ZHT6 | STM32F407VGT6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 144-LQFP (20x20 mm) | 144-LQFP - same | 144-LQFP - same | 100-LQFP - different |
| Core | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 168 MHz |
| Flash | 1.5 MB | 1.5 MB | 1.5 MB | 1 MB |
| SRAM | 320 KB | 320 KB | 320 KB | 192 KB |
| USB | USB OTG FS (internal PHY) | USB OTG FS | USB OTG FS | USB OTG FS + ULPI |
| DFSDM | 2 blocks | 2 blocks | 2 blocks | Not available |
| Ethernet MAC | Not available | Not available | Not available | 10/100 Mbit/s |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +85C | -40C to +85C |
주요 차별점
- Dual DFSDM digital filter blocks for sigma-delta modulators (vs STM32F407VGT6)
- USB OTG Full-Speed with internal PHY (vs STM32F407VGT6)
- 1.5 MB Flash vs typical 1 MB in same class (vs STM32F407VGT6)
설계 노트
The STM32F413ZHT3 requires a 1.7-3.6 V supply on VDD/VDDA with separate decoupling on each pair. A 100 nF ceramic cap on every VDD pin and a 4.7 uF bulk capacitor on VDDA are recommended per ST application note AN4325. Core current can reach 120 mA at 100 MHz with all peripherals active, so use a regulator with at least 200 mA headroom. For USB applications, ensure VDD stays above 3.0 V during bus peaks.
The 144-LQFP package has 0.5 mm pitch leads requiring careful PCB layout. Use 0.25 mm-wide traces with 0.2 mm spacing and break out the inner GPIO bank to inner layers through 0.2 mm vias. Place a continuous ground plane beneath the package and route the high-speed USB DP/DM pair as a 90-ohm differential with no more than 2 vias total. Reference the STM32 hardware design guide UM1855 for full PCB stackup recommendations.
Estimated: At 100 MHz operation with all peripherals active, the STM32F413ZHT3 dissipates approximately 0.5-0.8 W. The 144-LQFP package has a theta_JA around 40 C/W, giving a 30C junction temperature rise above ambient. For industrial 85C ambient, this keeps junction below 125C, but for full -40C to +125C operation, derate the clock frequency to 64 MHz or improve PCB copper pour to lower theta_JA to 30 C/W.
The DFSDM peripheral on STM32F413ZHT3 requires careful clock configuration - the DFSDM clock must be enabled in RCC before configuring the digital filter. The USB OTG FS internal PHY requires the VDDUSB pin to be supplied; on this package VDDUSB is internally bonded to VDD. The 144-LQFP package is NOT pin-compatible with the 100-LQFP or 64-LQFP STM32F4 variants despite similar marking schemes.
규정 준수 정보
RoHS compliant per ST product page. Industrial temperature grade -40C to +125C. Not AEC-Q100 qualified - choose STM32F413ZHT3 automotive variant for automotive use.
