STM32F413ZHT3 - 100MHz Cortex-M4 MCU 1.5MB Flash 144-LQFP | STMicroelectronics
Référence : STM32F413ZHT3 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $14.92 | $14,92 |
| 10 | $13.43 | $134,30 |
| 100 | $11.65 | $1 165,00 |
| 500 | $10.5 | $5 250,00 |
| 1 000 | $9.18 | $9 180,00 |
STM32F413ZHT3 Présentation
What is a Cortex-M4 microcontroller? A Cortex-M4 microcontroller is a 32-bit RISC processor core designed by Arm Holdings for embedded applications, featuring a single-precision floating-point unit (FPU) and Digital Signal Processing (DSP) instructions. It sits within the broader taxonomy of microcontroller -> 32-bit MCU -> ARM Cortex-M family -> Cortex-M4 sub-family -> power management IC ecosystem. Cortex-M4 MCUs target applications requiring deterministic real-time control combined with signal processing, replacing combinations of 8/16-bit MCUs and external DSPs in compact BOMs.
Key features of the STM32F413ZHT3 include 1.5 MB of embedded Flash with read-while-write support, 320 KB of SRAM (including 4 KB of backup SRAM), a 100 MHz Cortex-M4F core with single-precision FPU, and a low-power RTC with sub-second accuracy. The device also includes a 4 KB backup register area, a true random number generator (TRNG), and cryptographic acceleration supporting AES-256, plus a USB 2.0 Full-Speed On-The-Go controller with internal PHY.
Architecturally, the STM32F413ZHT3 uses ST's 90 nm embedded Flash process, integrates an L1 cache to offset Flash wait-states at 100 MHz, and supports memory-mapped external memories through its Flexible Static Memory Controller (FSMC). The dual DFSDM blocks enable hardware sigma-delta demodulation for MEMS microphones and isolated current sensing, which is unusual in this MCU class.
Typical applications include industrial motor control (BLDC/PMSM via timers + DFSDM), building automation HMI panels, USB-powered measurement instruments, audio front-ends (USB Audio + DACs), and IoT gateways using the integrated USB OTG plus CAN bus. The wide 1.7 V to 3.6 V supply range also suits battery-powered designs with direct Li-Ion cell connection.
When designing with this part, consider that the 144-LQFP package has limited thermal headroom; at full 100 MHz operation with all peripherals active, expect around 120 mA core current. The DFSDM digital filter is a key advantage in audio and sensor applications but requires a separate sigma-delta modulator in the signal chain.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet. Engineers evaluating second sources for STMicroelectronics STM32F413ZHT3 should consider same-package and pin-compatible cross-references listed below.
Alternatives de remplacement direct pour STM32F413ZHT3 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec STM32F413ZHT3 (même facteur de forme et même empreinte) — différant par ADC, Communication Interfaces, Core, Package, SRAM.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
STM32F413ZHJ6
✅ Remplacement direct✓ En stock
$9.4 / unité
Voir la fiche technique →STM32F423ZHT6
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM32F407VGT6
✅ Remplacement direct✓ En stock
$7.55 / unité
Voir la fiche technique →STM32F413ZHT3 Valeurs maximales et caractéristiques électriques
| Core | ARM Cortex-M4F with FPU and DSP |
| Maximum Clock Speed | 100 MHz |
| Core Mark Performance | 125 DMIPS |
| Flash Memory | 1.5 MB |
| SRAM | 320 KB (including 4 KB backup SRAM) |
| Operating Voltage Range | 1.7 V to 3.6 V |
| ADC | 1 x 12-bit, up to 2.4 MSPS |
| DAC | 2 x 12-bit |
| DFSDM | 2 digital filter blocks for sigma-delta modulators |
| USB | USB 2.0 OTG Full-Speed with internal PHY |
| Communication Interfaces | USART, SPI, I2C, CAN, USB OTG FS, SDMMC |
| Boîtier | 144-LQFP (20x20 mm) |
| I/O Count | 114 GPIO |
| Température de fonctionnement | -40C to +125C (industrial grade) |
| Statut RoHS | Compliant |
Configuration des broches de STM32F413ZHT3
| Broche 1 | PE2 — GPIO PE2 / TRACECLK / FSMC_A23 |
| Broche 2 | PE3 — GPIO PE3 / TRACED0 / FSMC_A19 |
| Broche 3 | PE4 — GPIO PE4 / TRACED1 / FSMC_A20 |
| Broche 4 | PE5 — GPIO PE5 / TRACED2 / FSMC_A21 |
| Broche 5 | PE6 — GPIO PE6 / TRACED3 / FSMC_A22 |
| Broche 6 | VBAT — Battery backup power supply |
| Broche 7 | PC13 — GPIO PC13 / RTC_TAMP1 / RTC_OUT |
| Broche 8 | PC14 — GPIO PC14 / OSC32_IN |
| Broche 9 | PC15 — GPIO PC15 / OSC32_OUT |
| Broche 10 | VSS — Ground |
| Broche 11 | VDD — Digital power supply 1.7-3.6 V |
| Broche 12 | OSC_IN — HSE oscillator input |
| Broche 13 | OSC_OUT — HSE oscillator output |
| Broche 14 | NRST — Reset input, active low |
| Broche 15 | PC0 — GPIO PC0 / ADC1_IN10 |
| Broche 16 | PC1 — GPIO PC1 / ADC1_IN11 |
| Broche 17 | PC2 — GPIO PC2 / ADC1_IN12 |
| Broche 18 | PC3 — GPIO PC3 / ADC1_IN13 |
| Broche 19 | VREF+ — ADC positive reference voltage |
| Broche 20 | VDDA — Analog power supply |
| Broche 21 | PA0 — GPIO PA0 / WKUP / TIM2_CH1_ETR |
| Broche 22 | PA1 — GPIO PA1 / TIM2_CH2 |
| Broche 23 | PA2 — GPIO PA2 / TIM2_CH3 / USART2_TX |
| Broche 24 | PA3 — GPIO PA3 / TIM2_CH4 / USART2_RX |
| Broche 25 | VSS — Ground |
| Broche 26 | VDD — Digital power supply 1.7-3.6 V |
| Broche 27 | PA4 — GPIO PA4 / SPI1_NSS / DAC1_OUT |
| Broche 28 | PA5 — GPIO PA5 / SPI1_SCK / DAC2_OUT |
| Broche 29 | PA6 — GPIO PA6 / SPI1_MISO / TIM13_CH1 |
| Broche 30 | PA7 — GPIO PA7 / SPI1_MOSI / TIM14_CH1 |
| Broche 31 | PC4 — GPIO PC4 / ADC1_IN14 |
| Broche 32 | PC5 — GPIO PC5 / ADC1_IN15 |
| Broche 33 | PB0 — GPIO PB0 / TIM3_CH3 / ADC1_IN8 |
| Broche 34 | PB1 — GPIO PB1 / TIM3_CH4 / ADC1_IN9 |
| Broche 35 | PB2 — GPIO PB2 / BOOT1 |
| Broche 36 | PE7 — GPIO PE7 / FSMC_D4 |
| Broche 37 | PE8 — GPIO PE8 / FSMC_D5 |
| Broche 38 | PE9 — GPIO PE9 / FSMC_D6 |
| Broche 39 | PE10 — GPIO PE10 / FSMC_D7 |
| Broche 40 | PE11 — GPIO PE11 / FSMC_D8 |
| Broche 41 | PE12 — GPIO PE12 / FSMC_D9 |
| Broche 42 | PE13 — GPIO PE13 / FSMC_D10 |
| Broche 43 | PE14 — GPIO PE14 / FSMC_D11 |
| Broche 44 | PE15 — GPIO PE15 / FSMC_D12 |
| Broche 45 | PB10 — GPIO PB10 / I2C2_SCL / USART3_TX |
| Broche 46 | PB11 — GPIO PB11 / I2C2_SDA / USART3_RX |
| Broche 47 | VSS — Ground |
| Broche 48 | VDD — Digital power supply 1.7-3.6 V |
| Broche 49 | PB12 — GPIO PB12 / SPI2_NSS / I2S2_WS |
| Broche 50 | PB13 — GPIO PB13 / SPI2_SCK / I2S2_CK |
| Broche 51 | PB14 — GPIO PB14 / SPI2_MISO / TIM12_CH1 |
| Broche 52 | PB15 — GPIO PB15 / SPI2_MOSI / TIM12_CH2 |
| Broche 53 | PD8 — GPIO PD8 / FSMC_D13 |
| Broche 54 | PD9 — GPIO PD9 / FSMC_D14 |
| Broche 55 | PD10 — GPIO PD10 / FSMC_D15 |
| Broche 56 | PD11 — GPIO PD11 / FSMC_A16 |
| Broche 57 | PD12 — GPIO PD12 / FSMC_A17 |
| Broche 58 | PD13 — GPIO PD13 / FSMC_A18 |
| Broche 59 | PD14 — GPIO PD14 / FSMC_D0 |
| Broche 60 | PD15 — GPIO PD15 / FSMC_D1 |
| Broche 61 | PC6 — GPIO PC6 / TIM3_CH1 / USART6_TX |
| Broche 62 | PC7 — GPIO PC7 / TIM3_CH2 / USART6_RX |
| Broche 63 | PC8 — GPIO PC8 / TIM3_CH3 / SDMMC_D0 |
| Broche 64 | PC9 — GPIO PC9 / TIM3_CH4 / SDMMC_D1 |
| Broche 65 | PA8 — GPIO PA8 / TIM1_CH1 / USART1_CK |
| Broche 66 | PA9 — GPIO PA9 / TIM1_CH2 / USART1_TX |
| Broche 67 | PA10 — GPIO PA10 / TIM1_CH3 / USART1_RX |
| Broche 68 | PA11 — GPIO PA11 / CAN1_RX / USB_DM |
| Broche 69 | PA12 — GPIO PA12 / CAN1_TX / USB_DP |
| Broche 70 | PA13 — GPIO PA13 / SWDIO |
| Broche 71 | VSS — Ground |
| Broche 72 | VDD — Digital power supply 1.7-3.6 V |
| Broche 73 | PA14 — GPIO PA14 / SWCLK |
| Broche 74 | PA15 — GPIO PA15 / TIM2_CH1_ETR / SPI1_NSS |
| Broche 75 | PC10 — GPIO PC10 / UART4_TX / SDMMC_D2 |
| Broche 76 | PC11 — GPIO PC11 / UART4_RX / SDMMC_D3 |
| Broche 77 | PC12 — GPIO PC12 / UART5_TX / SDMMC_CK |
| Broche 78 | PD0 — GPIO PD0 / CAN1_RX / FSMC_D2 |
| Broche 79 | PD1 — GPIO PD1 / CAN1_TX / FSMC_D3 |
| Broche 80 | PD2 — GPIO PD2 / SDMMC_CMD / TIM3_ETR |
| Broche 81 | PD3 — GPIO PD3 / FSMC_CLK |
| Broche 82 | PD4 — GPIO PD4 / FSMC_NOE |
| Broche 83 | PD5 — GPIO PD5 / FSMC_NWE |
| Broche 84 | PD6 — GPIO PD6 / FSMC_NWAIT |
| Broche 85 | PD7 — GPIO PD7 / FSMC_NE1 |
| Broche 86 | PB3 — GPIO PB3 / SWO / TIM2_CH2 |
| Broche 87 | PB4 — GPIO PB4 / TIM3_CH1 |
| Broche 88 | PB5 — GPIO PB5 / TIM3_CH2 |
| Broche 89 | PB6 — GPIO PB6 / I2C1_SCL / USART1_TX |
| Broche 90 | PB7 — GPIO PB7 / I2C1_SDA / USART1_RX |
| Broche 91 | BOOT0 — Boot mode select |
| Broche 92 | PB8 — GPIO PB8 / TIM4_CH3 / I2C1_SCL |
| Broche 93 | PB9 — GPIO PB9 / TIM4_CH4 / I2C1_SDA |
| Broche 94 | PE0 — GPIO PE0 / TIM4_ETR |
| Broche 95 | PE1 — GPIO PE1 / FSMC_NBL0 |
| Broche 96 | VSS — Ground |
| Broche 97 | VDD — Digital power supply 1.7-3.6 V |
| Broche 98 | PF0 — GPIO PF0 / FSMC_A0 |
| Broche 99 | PF1 — GPIO PF1 / FSMC_A1 |
| Broche 100 | PF2 — GPIO PF2 / FSMC_A2 |
| Broche 101 | PF3 — GPIO PF3 / FSMC_A3 |
| Broche 102 | PF4 — GPIO PF4 / FSMC_A4 |
| Broche 103 | PF5 — GPIO PF5 / FSMC_A5 |
| Broche 104 | VSS — Ground |
| Broche 105 | VDD — Digital power supply 1.7-3.6 V |
| Broche 106 | PF6 — GPIO PF6 / TIM10_CH1 |
| Broche 107 | PF7 — GPIO PF7 / TIM11_CH1 |
| Broche 108 | PF8 — GPIO PF8 / TIM12_CH1 |
| Broche 109 | PF9 — GPIO PF9 / TIM13_CH1 |
| Broche 110 | PF10 — GPIO PF10 / TIM14_CH1 |
| Broche 111 | PF11 — GPIO PF11 / FSMC_NRAS |
| Broche 112 | PF12 — GPIO PF12 / FSMC_A6 |
| Broche 113 | PF13 — GPIO PF13 / FSMC_A7 |
| Broche 114 | PF14 — GPIO PF14 / FSMC_A8 |
| Broche 115 | PF15 — GPIO PF15 / FSMC_A9 |
| Broche 116 | PG0 — GPIO PG0 / FSMC_A10 |
| Broche 117 | PG1 — GPIO PG1 / FSMC_A11 |
| Broche 118 | PE2 — GPIO PE2 / FSMC_A23 |
| Broche 119 | PE3 — GPIO PE3 / FSMC_A19 |
| Broche 120 | PE4 — GPIO PE4 / FSMC_A20 |
| Broche 121 | PE5 — GPIO PE5 / FSMC_A21 |
| Broche 122 | PE6 — GPIO PE6 / FSMC_A22 |
| Broche 123 | VSS — Ground |
| Broche 124 | VDD — Digital power supply 1.7-3.6 V |
| Broche 125 | PG2 — GPIO PG2 / FSMC_A12 |
| Broche 126 | PG3 — GPIO PG3 / FSMC_A13 |
| Broche 127 | PG4 — GPIO PG4 / FSMC_A14 |
| Broche 128 | PG5 — GPIO PG5 / FSMC_A15 |
| Broche 129 | PG6 — GPIO PG6 / FSMC_INT2 |
| Broche 130 | PG7 — GPIO PG7 / FSMC_INT3 |
| Broche 131 | PG8 — GPIO PG8 |
| Broche 132 | VSS — Ground |
| Broche 133 | VDD — Digital power supply 1.7-3.6 V |
| Broche 134 | PC13 — GPIO PC13 / RTC_TAMP1 |
| Broche 135 | PA0 — GPIO PA0 / WKUP |
| Broche 136 | PA1 — GPIO PA1 |
| Broche 137 | PA2 — GPIO PA2 |
| Broche 138 | PA3 — GPIO PA3 |
| Broche 139 | VSS — Ground |
| Broche 140 | VDD — Digital power supply 1.7-3.6 V |
| Broche 141 | PA4 — GPIO PA4 |
| Broche 142 | PA5 — GPIO PA5 |
| Broche 143 | PB6 — GPIO PB6 |
| Broche 144 | PB7 — GPIO PB7 |
Applications typiques
STM32F413ZHT3 convient pour 6 applications: Industrial Motor Control (BLDC/PMSM), USB Audio Interface and DAC, Building Automation HMI Panel, USB-Powered Measurement Instrument, IoT Gateway with CAN and USB, Digital Sensor Hub with DFSDM.
Industrial Motor Control (BLDC/PMSM)
The STM32F413ZHT3 fits BLDC and PMSM motor control with its 100 MHz Cortex-M4F DSP extensions, advanced timer array (TIM1, TIM8 with complementary PWM), and dual DFSDM blocks for isolated current sensing. The 1.5 MB Flash and 320 KB SRAM handle field-oriented control (FOC) algorithms with sensorless observer routines. The 144-LQFP exposes enough pins for 3-phase PWM generation, Hall/encoder inputs, and CAN bus communication to a host controller.
Recommandé
USB Audio Interface and DAC
The STM32F413ZHT3 serves as a USB Audio Class 2.0 device with internal PHY, streaming up to 24-bit/96 kHz audio to a paired external DAC. The dual 12-bit DACs and DFSDM blocks support microphone arrays and headphone monitoring. Cortex-M4F DSP extensions enable real-time EQ, mixing, and limiter algorithms in the same firmware loop.
Recommandé
Building Automation HMI Panel
The 100 MHz Cortex-M4F and 1.5 MB Flash drive TFT LCD panels up to 480x272 through FSMC, while the 320 KB SRAM keeps double-buffered GUIs responsive. The 144-LQFP exposes 114 GPIO for capacitive touch sensing, RS-485 transceivers, and CAN bus to HVAC controllers. The low-power RTC with calendar and tamper detection suits battery-backed wall-mount operation.
Recommandé
USB-Powered Measurement Instrument
The STM32F413ZHT3 operates from a USB 5 V rail with internal 3.3 V LDO regulation, providing a 1 MSPS 12-bit ADC plus two 12-bit DACs for analog front-end stimulus. The 1.5 MB Flash holds calibration tables and DSP filter coefficients for FFT/octave-band analysis. USB OTG Full-Speed with internal PHY eliminates the need for an external ULPI chip, reducing BOM cost for compact instruments.
Recommandé
IoT Gateway with CAN and USB
The STM32F413ZHT3 aggregates sensor data from CAN 2.0B and RS-485 buses, then bridges to a host via USB or Ethernet (external PHY). The 1.5 MB Flash and 320 KB SRAM run a lightweight MQTT or Modbus gateway stack with local caching. The Cortex-M4F core handles TLS handshake and certificate parsing in software when needed.
Recommandé
Digital Sensor Hub with DFSDM
The dual DFSDM blocks on the STM32F413ZHT3 connect to up to 8 sigma-delta MEMS microphones or isolated current-sense modulators, with hardware digital filtering. This eliminates the CPU overhead of bit-banging PDM streams and enables multi-channel beamforming or power-quality monitoring. The 144-LQFP pin count supports external modulator clock distribution.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour STM32F413ZHT3 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM32F413ZHJ6 | STM32F423ZHT6 | STM32F407VGT6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 144-LQFP (20x20 mm) | 144-LQFP - same | 144-LQFP - same | 100-LQFP - different |
| Core | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 168 MHz |
| Flash | 1.5 MB | 1.5 MB | 1.5 MB | 1 MB |
| SRAM | 320 KB | 320 KB | 320 KB | 192 KB |
| USB | USB OTG FS (internal PHY) | USB OTG FS | USB OTG FS | USB OTG FS + ULPI |
| DFSDM | 2 blocks | 2 blocks | 2 blocks | Not available |
| Ethernet MAC | Not available | Not available | Not available | 10/100 Mbit/s |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +85C | -40C to +85C |
Principaux différenciateurs
- Dual DFSDM digital filter blocks for sigma-delta modulators (vs STM32F407VGT6)
- USB OTG Full-Speed with internal PHY (vs STM32F407VGT6)
- 1.5 MB Flash vs typical 1 MB in same class (vs STM32F407VGT6)
Notes de conception
The STM32F413ZHT3 requires a 1.7-3.6 V supply on VDD/VDDA with separate decoupling on each pair. A 100 nF ceramic cap on every VDD pin and a 4.7 uF bulk capacitor on VDDA are recommended per ST application note AN4325. Core current can reach 120 mA at 100 MHz with all peripherals active, so use a regulator with at least 200 mA headroom. For USB applications, ensure VDD stays above 3.0 V during bus peaks.
The 144-LQFP package has 0.5 mm pitch leads requiring careful PCB layout. Use 0.25 mm-wide traces with 0.2 mm spacing and break out the inner GPIO bank to inner layers through 0.2 mm vias. Place a continuous ground plane beneath the package and route the high-speed USB DP/DM pair as a 90-ohm differential with no more than 2 vias total. Reference the STM32 hardware design guide UM1855 for full PCB stackup recommendations.
Estimated: At 100 MHz operation with all peripherals active, the STM32F413ZHT3 dissipates approximately 0.5-0.8 W. The 144-LQFP package has a theta_JA around 40 C/W, giving a 30C junction temperature rise above ambient. For industrial 85C ambient, this keeps junction below 125C, but for full -40C to +125C operation, derate the clock frequency to 64 MHz or improve PCB copper pour to lower theta_JA to 30 C/W.
The DFSDM peripheral on STM32F413ZHT3 requires careful clock configuration - the DFSDM clock must be enabled in RCC before configuring the digital filter. The USB OTG FS internal PHY requires the VDDUSB pin to be supplied; on this package VDDUSB is internally bonded to VDD. The 144-LQFP package is NOT pin-compatible with the 100-LQFP or 64-LQFP STM32F4 variants despite similar marking schemes.
Informations de conformité
RoHS compliant per ST product page. Industrial temperature grade -40C to +125C. Not AEC-Q100 qualified - choose STM32F413ZHT3 automotive variant for automotive use.
