STM32F413ZHT3 - 100MHz Cortex-M4 MCU 1.5MB Flash 144-LQFP | STMicroelectronics
Артикул: STM32F413ZHT3 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $14.92 | $14,92 |
| 10 | $13.43 | $134,30 |
| 100 | $11.65 | $1.165,00 |
| 500 | $10.5 | $5.250,00 |
| 1.000 | $9.18 | $9.180,00 |
STM32F413ZHT3 Обзор
What is a Cortex-M4 microcontroller? A Cortex-M4 microcontroller is a 32-bit RISC processor core designed by Arm Holdings for embedded applications, featuring a single-precision floating-point unit (FPU) and Digital Signal Processing (DSP) instructions. It sits within the broader taxonomy of microcontroller -> 32-bit MCU -> ARM Cortex-M family -> Cortex-M4 sub-family -> power management IC ecosystem. Cortex-M4 MCUs target applications requiring deterministic real-time control combined with signal processing, replacing combinations of 8/16-bit MCUs and external DSPs in compact BOMs.
Key features of the STM32F413ZHT3 include 1.5 MB of embedded Flash with read-while-write support, 320 KB of SRAM (including 4 KB of backup SRAM), a 100 MHz Cortex-M4F core with single-precision FPU, and a low-power RTC with sub-second accuracy. The device also includes a 4 KB backup register area, a true random number generator (TRNG), and cryptographic acceleration supporting AES-256, plus a USB 2.0 Full-Speed On-The-Go controller with internal PHY.
Architecturally, the STM32F413ZHT3 uses ST's 90 nm embedded Flash process, integrates an L1 cache to offset Flash wait-states at 100 MHz, and supports memory-mapped external memories through its Flexible Static Memory Controller (FSMC). The dual DFSDM blocks enable hardware sigma-delta demodulation for MEMS microphones and isolated current sensing, which is unusual in this MCU class.
Typical applications include industrial motor control (BLDC/PMSM via timers + DFSDM), building automation HMI panels, USB-powered measurement instruments, audio front-ends (USB Audio + DACs), and IoT gateways using the integrated USB OTG plus CAN bus. The wide 1.7 V to 3.6 V supply range also suits battery-powered designs with direct Li-Ion cell connection.
When designing with this part, consider that the 144-LQFP package has limited thermal headroom; at full 100 MHz operation with all peripherals active, expect around 120 mA core current. The DFSDM digital filter is a key advantage in audio and sensor applications but requires a separate sigma-delta modulator in the signal chain.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet. Engineers evaluating second sources for STMicroelectronics STM32F413ZHT3 should consider same-package and pin-compatible cross-references listed below.
Аналоги без доработки для STM32F413ZHT3 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с STM32F413ZHT3 (тот же форм-фактор и посадочное место) — отличается по ADC, Communication Interfaces, Core, Package, SRAM.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
STM32F413ZHJ6
✅ Прямая замена✓ В наличии
$9.4 / шт.
Открыть даташит →STM32F423ZHT6
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
STM32F407VGT6
✅ Прямая замена✓ В наличии
$7.55 / шт.
Открыть даташит →STM32F413ZHT3 Максимальные параметры и электрические характеристики
| Core | ARM Cortex-M4F with FPU and DSP |
| Maximum Clock Speed | 100 MHz |
| Core Mark Performance | 125 DMIPS |
| Flash Memory | 1.5 MB |
| SRAM | 320 KB (including 4 KB backup SRAM) |
| Operating Voltage Range | 1.7 V to 3.6 V |
| ADC | 1 x 12-bit, up to 2.4 MSPS |
| DAC | 2 x 12-bit |
| DFSDM | 2 digital filter blocks for sigma-delta modulators |
| USB | USB 2.0 OTG Full-Speed with internal PHY |
| Communication Interfaces | USART, SPI, I2C, CAN, USB OTG FS, SDMMC |
| Корпус | 144-LQFP (20x20 mm) |
| I/O Count | 114 GPIO |
| Рабочая температура | -40C to +125C (industrial grade) |
| Статус RoHS | Compliant |
Конфигурация выводов STM32F413ZHT3
| Контакт 1 | PE2 — GPIO PE2 / TRACECLK / FSMC_A23 |
| Контакт 2 | PE3 — GPIO PE3 / TRACED0 / FSMC_A19 |
| Контакт 3 | PE4 — GPIO PE4 / TRACED1 / FSMC_A20 |
| Контакт 4 | PE5 — GPIO PE5 / TRACED2 / FSMC_A21 |
| Контакт 5 | PE6 — GPIO PE6 / TRACED3 / FSMC_A22 |
| Контакт 6 | VBAT — Battery backup power supply |
| Контакт 7 | PC13 — GPIO PC13 / RTC_TAMP1 / RTC_OUT |
| Контакт 8 | PC14 — GPIO PC14 / OSC32_IN |
| Контакт 9 | PC15 — GPIO PC15 / OSC32_OUT |
| Контакт 10 | VSS — Ground |
| Контакт 11 | VDD — Digital power supply 1.7-3.6 V |
| Контакт 12 | OSC_IN — HSE oscillator input |
| Контакт 13 | OSC_OUT — HSE oscillator output |
| Контакт 14 | NRST — Reset input, active low |
| Контакт 15 | PC0 — GPIO PC0 / ADC1_IN10 |
| Контакт 16 | PC1 — GPIO PC1 / ADC1_IN11 |
| Контакт 17 | PC2 — GPIO PC2 / ADC1_IN12 |
| Контакт 18 | PC3 — GPIO PC3 / ADC1_IN13 |
| Контакт 19 | VREF+ — ADC positive reference voltage |
| Контакт 20 | VDDA — Analog power supply |
| Контакт 21 | PA0 — GPIO PA0 / WKUP / TIM2_CH1_ETR |
| Контакт 22 | PA1 — GPIO PA1 / TIM2_CH2 |
| Контакт 23 | PA2 — GPIO PA2 / TIM2_CH3 / USART2_TX |
| Контакт 24 | PA3 — GPIO PA3 / TIM2_CH4 / USART2_RX |
| Контакт 25 | VSS — Ground |
| Контакт 26 | VDD — Digital power supply 1.7-3.6 V |
| Контакт 27 | PA4 — GPIO PA4 / SPI1_NSS / DAC1_OUT |
| Контакт 28 | PA5 — GPIO PA5 / SPI1_SCK / DAC2_OUT |
| Контакт 29 | PA6 — GPIO PA6 / SPI1_MISO / TIM13_CH1 |
| Контакт 30 | PA7 — GPIO PA7 / SPI1_MOSI / TIM14_CH1 |
| Контакт 31 | PC4 — GPIO PC4 / ADC1_IN14 |
| Контакт 32 | PC5 — GPIO PC5 / ADC1_IN15 |
| Контакт 33 | PB0 — GPIO PB0 / TIM3_CH3 / ADC1_IN8 |
| Контакт 34 | PB1 — GPIO PB1 / TIM3_CH4 / ADC1_IN9 |
| Контакт 35 | PB2 — GPIO PB2 / BOOT1 |
| Контакт 36 | PE7 — GPIO PE7 / FSMC_D4 |
| Контакт 37 | PE8 — GPIO PE8 / FSMC_D5 |
| Контакт 38 | PE9 — GPIO PE9 / FSMC_D6 |
| Контакт 39 | PE10 — GPIO PE10 / FSMC_D7 |
| Контакт 40 | PE11 — GPIO PE11 / FSMC_D8 |
| Контакт 41 | PE12 — GPIO PE12 / FSMC_D9 |
| Контакт 42 | PE13 — GPIO PE13 / FSMC_D10 |
| Контакт 43 | PE14 — GPIO PE14 / FSMC_D11 |
| Контакт 44 | PE15 — GPIO PE15 / FSMC_D12 |
| Контакт 45 | PB10 — GPIO PB10 / I2C2_SCL / USART3_TX |
| Контакт 46 | PB11 — GPIO PB11 / I2C2_SDA / USART3_RX |
| Контакт 47 | VSS — Ground |
| Контакт 48 | VDD — Digital power supply 1.7-3.6 V |
| Контакт 49 | PB12 — GPIO PB12 / SPI2_NSS / I2S2_WS |
| Контакт 50 | PB13 — GPIO PB13 / SPI2_SCK / I2S2_CK |
| Контакт 51 | PB14 — GPIO PB14 / SPI2_MISO / TIM12_CH1 |
| Контакт 52 | PB15 — GPIO PB15 / SPI2_MOSI / TIM12_CH2 |
| Контакт 53 | PD8 — GPIO PD8 / FSMC_D13 |
| Контакт 54 | PD9 — GPIO PD9 / FSMC_D14 |
| Контакт 55 | PD10 — GPIO PD10 / FSMC_D15 |
| Контакт 56 | PD11 — GPIO PD11 / FSMC_A16 |
| Контакт 57 | PD12 — GPIO PD12 / FSMC_A17 |
| Контакт 58 | PD13 — GPIO PD13 / FSMC_A18 |
| Контакт 59 | PD14 — GPIO PD14 / FSMC_D0 |
| Контакт 60 | PD15 — GPIO PD15 / FSMC_D1 |
| Контакт 61 | PC6 — GPIO PC6 / TIM3_CH1 / USART6_TX |
| Контакт 62 | PC7 — GPIO PC7 / TIM3_CH2 / USART6_RX |
| Контакт 63 | PC8 — GPIO PC8 / TIM3_CH3 / SDMMC_D0 |
| Контакт 64 | PC9 — GPIO PC9 / TIM3_CH4 / SDMMC_D1 |
| Контакт 65 | PA8 — GPIO PA8 / TIM1_CH1 / USART1_CK |
| Контакт 66 | PA9 — GPIO PA9 / TIM1_CH2 / USART1_TX |
| Контакт 67 | PA10 — GPIO PA10 / TIM1_CH3 / USART1_RX |
| Контакт 68 | PA11 — GPIO PA11 / CAN1_RX / USB_DM |
| Контакт 69 | PA12 — GPIO PA12 / CAN1_TX / USB_DP |
| Контакт 70 | PA13 — GPIO PA13 / SWDIO |
| Контакт 71 | VSS — Ground |
| Контакт 72 | VDD — Digital power supply 1.7-3.6 V |
| Контакт 73 | PA14 — GPIO PA14 / SWCLK |
| Контакт 74 | PA15 — GPIO PA15 / TIM2_CH1_ETR / SPI1_NSS |
| Контакт 75 | PC10 — GPIO PC10 / UART4_TX / SDMMC_D2 |
| Контакт 76 | PC11 — GPIO PC11 / UART4_RX / SDMMC_D3 |
| Контакт 77 | PC12 — GPIO PC12 / UART5_TX / SDMMC_CK |
| Контакт 78 | PD0 — GPIO PD0 / CAN1_RX / FSMC_D2 |
| Контакт 79 | PD1 — GPIO PD1 / CAN1_TX / FSMC_D3 |
| Контакт 80 | PD2 — GPIO PD2 / SDMMC_CMD / TIM3_ETR |
| Контакт 81 | PD3 — GPIO PD3 / FSMC_CLK |
| Контакт 82 | PD4 — GPIO PD4 / FSMC_NOE |
| Контакт 83 | PD5 — GPIO PD5 / FSMC_NWE |
| Контакт 84 | PD6 — GPIO PD6 / FSMC_NWAIT |
| Контакт 85 | PD7 — GPIO PD7 / FSMC_NE1 |
| Контакт 86 | PB3 — GPIO PB3 / SWO / TIM2_CH2 |
| Контакт 87 | PB4 — GPIO PB4 / TIM3_CH1 |
| Контакт 88 | PB5 — GPIO PB5 / TIM3_CH2 |
| Контакт 89 | PB6 — GPIO PB6 / I2C1_SCL / USART1_TX |
| Контакт 90 | PB7 — GPIO PB7 / I2C1_SDA / USART1_RX |
| Контакт 91 | BOOT0 — Boot mode select |
| Контакт 92 | PB8 — GPIO PB8 / TIM4_CH3 / I2C1_SCL |
| Контакт 93 | PB9 — GPIO PB9 / TIM4_CH4 / I2C1_SDA |
| Контакт 94 | PE0 — GPIO PE0 / TIM4_ETR |
| Контакт 95 | PE1 — GPIO PE1 / FSMC_NBL0 |
| Контакт 96 | VSS — Ground |
| Контакт 97 | VDD — Digital power supply 1.7-3.6 V |
| Контакт 98 | PF0 — GPIO PF0 / FSMC_A0 |
| Контакт 99 | PF1 — GPIO PF1 / FSMC_A1 |
| Контакт 100 | PF2 — GPIO PF2 / FSMC_A2 |
| Контакт 101 | PF3 — GPIO PF3 / FSMC_A3 |
| Контакт 102 | PF4 — GPIO PF4 / FSMC_A4 |
| Контакт 103 | PF5 — GPIO PF5 / FSMC_A5 |
| Контакт 104 | VSS — Ground |
| Контакт 105 | VDD — Digital power supply 1.7-3.6 V |
| Контакт 106 | PF6 — GPIO PF6 / TIM10_CH1 |
| Контакт 107 | PF7 — GPIO PF7 / TIM11_CH1 |
| Контакт 108 | PF8 — GPIO PF8 / TIM12_CH1 |
| Контакт 109 | PF9 — GPIO PF9 / TIM13_CH1 |
| Контакт 110 | PF10 — GPIO PF10 / TIM14_CH1 |
| Контакт 111 | PF11 — GPIO PF11 / FSMC_NRAS |
| Контакт 112 | PF12 — GPIO PF12 / FSMC_A6 |
| Контакт 113 | PF13 — GPIO PF13 / FSMC_A7 |
| Контакт 114 | PF14 — GPIO PF14 / FSMC_A8 |
| Контакт 115 | PF15 — GPIO PF15 / FSMC_A9 |
| Контакт 116 | PG0 — GPIO PG0 / FSMC_A10 |
| Контакт 117 | PG1 — GPIO PG1 / FSMC_A11 |
| Контакт 118 | PE2 — GPIO PE2 / FSMC_A23 |
| Контакт 119 | PE3 — GPIO PE3 / FSMC_A19 |
| Контакт 120 | PE4 — GPIO PE4 / FSMC_A20 |
| Контакт 121 | PE5 — GPIO PE5 / FSMC_A21 |
| Контакт 122 | PE6 — GPIO PE6 / FSMC_A22 |
| Контакт 123 | VSS — Ground |
| Контакт 124 | VDD — Digital power supply 1.7-3.6 V |
| Контакт 125 | PG2 — GPIO PG2 / FSMC_A12 |
| Контакт 126 | PG3 — GPIO PG3 / FSMC_A13 |
| Контакт 127 | PG4 — GPIO PG4 / FSMC_A14 |
| Контакт 128 | PG5 — GPIO PG5 / FSMC_A15 |
| Контакт 129 | PG6 — GPIO PG6 / FSMC_INT2 |
| Контакт 130 | PG7 — GPIO PG7 / FSMC_INT3 |
| Контакт 131 | PG8 — GPIO PG8 |
| Контакт 132 | VSS — Ground |
| Контакт 133 | VDD — Digital power supply 1.7-3.6 V |
| Контакт 134 | PC13 — GPIO PC13 / RTC_TAMP1 |
| Контакт 135 | PA0 — GPIO PA0 / WKUP |
| Контакт 136 | PA1 — GPIO PA1 |
| Контакт 137 | PA2 — GPIO PA2 |
| Контакт 138 | PA3 — GPIO PA3 |
| Контакт 139 | VSS — Ground |
| Контакт 140 | VDD — Digital power supply 1.7-3.6 V |
| Контакт 141 | PA4 — GPIO PA4 |
| Контакт 142 | PA5 — GPIO PA5 |
| Контакт 143 | PB6 — GPIO PB6 |
| Контакт 144 | PB7 — GPIO PB7 |
Типичное применение
STM32F413ZHT3 подходит для 6 применениеs: Industrial Motor Control (BLDC/PMSM), USB Audio Interface and DAC, Building Automation HMI Panel, USB-Powered Measurement Instrument, IoT Gateway with CAN and USB, Digital Sensor Hub with DFSDM.
Industrial Motor Control (BLDC/PMSM)
The STM32F413ZHT3 fits BLDC and PMSM motor control with its 100 MHz Cortex-M4F DSP extensions, advanced timer array (TIM1, TIM8 with complementary PWM), and dual DFSDM blocks for isolated current sensing. The 1.5 MB Flash and 320 KB SRAM handle field-oriented control (FOC) algorithms with sensorless observer routines. The 144-LQFP exposes enough pins for 3-phase PWM generation, Hall/encoder inputs, and CAN bus communication to a host controller.
Рекомендуется
USB Audio Interface and DAC
The STM32F413ZHT3 serves as a USB Audio Class 2.0 device with internal PHY, streaming up to 24-bit/96 kHz audio to a paired external DAC. The dual 12-bit DACs and DFSDM blocks support microphone arrays and headphone monitoring. Cortex-M4F DSP extensions enable real-time EQ, mixing, and limiter algorithms in the same firmware loop.
Рекомендуется
Building Automation HMI Panel
The 100 MHz Cortex-M4F and 1.5 MB Flash drive TFT LCD panels up to 480x272 through FSMC, while the 320 KB SRAM keeps double-buffered GUIs responsive. The 144-LQFP exposes 114 GPIO for capacitive touch sensing, RS-485 transceivers, and CAN bus to HVAC controllers. The low-power RTC with calendar and tamper detection suits battery-backed wall-mount operation.
Рекомендуется
USB-Powered Measurement Instrument
The STM32F413ZHT3 operates from a USB 5 V rail with internal 3.3 V LDO regulation, providing a 1 MSPS 12-bit ADC plus two 12-bit DACs for analog front-end stimulus. The 1.5 MB Flash holds calibration tables and DSP filter coefficients for FFT/octave-band analysis. USB OTG Full-Speed with internal PHY eliminates the need for an external ULPI chip, reducing BOM cost for compact instruments.
Рекомендуется
IoT Gateway with CAN and USB
The STM32F413ZHT3 aggregates sensor data from CAN 2.0B and RS-485 buses, then bridges to a host via USB or Ethernet (external PHY). The 1.5 MB Flash and 320 KB SRAM run a lightweight MQTT or Modbus gateway stack with local caching. The Cortex-M4F core handles TLS handshake and certificate parsing in software when needed.
Рекомендуется
Digital Sensor Hub with DFSDM
The dual DFSDM blocks on the STM32F413ZHT3 connect to up to 8 sigma-delta MEMS microphones or isolated current-sense modulators, with hardware digital filtering. This eliminates the CPU overhead of bit-banging PDM streams and enables multi-channel beamforming or power-quality monitoring. The 144-LQFP pin count supports external modulator clock distribution.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для STM32F413ZHT3 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | STM32F413ZHJ6 | STM32F423ZHT6 | STM32F407VGT6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 144-LQFP (20x20 mm) | 144-LQFP - same | 144-LQFP - same | 100-LQFP - different |
| Core | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 168 MHz |
| Flash | 1.5 MB | 1.5 MB | 1.5 MB | 1 MB |
| SRAM | 320 KB | 320 KB | 320 KB | 192 KB |
| USB | USB OTG FS (internal PHY) | USB OTG FS | USB OTG FS | USB OTG FS + ULPI |
| DFSDM | 2 blocks | 2 blocks | 2 blocks | Not available |
| Ethernet MAC | Not available | Not available | Not available | 10/100 Mbit/s |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +85C | -40C to +85C |
Ключевые отличия
- Dual DFSDM digital filter blocks for sigma-delta modulators (против STM32F407VGT6)
- USB OTG Full-Speed with internal PHY (против STM32F407VGT6)
- 1.5 MB Flash vs typical 1 MB in same class (против STM32F407VGT6)
Заметки по проектированию
The STM32F413ZHT3 requires a 1.7-3.6 V supply on VDD/VDDA with separate decoupling on each pair. A 100 nF ceramic cap on every VDD pin and a 4.7 uF bulk capacitor on VDDA are recommended per ST application note AN4325. Core current can reach 120 mA at 100 MHz with all peripherals active, so use a regulator with at least 200 mA headroom. For USB applications, ensure VDD stays above 3.0 V during bus peaks.
The 144-LQFP package has 0.5 mm pitch leads requiring careful PCB layout. Use 0.25 mm-wide traces with 0.2 mm spacing and break out the inner GPIO bank to inner layers through 0.2 mm vias. Place a continuous ground plane beneath the package and route the high-speed USB DP/DM pair as a 90-ohm differential with no more than 2 vias total. Reference the STM32 hardware design guide UM1855 for full PCB stackup recommendations.
Estimated: At 100 MHz operation with all peripherals active, the STM32F413ZHT3 dissipates approximately 0.5-0.8 W. The 144-LQFP package has a theta_JA around 40 C/W, giving a 30C junction temperature rise above ambient. For industrial 85C ambient, this keeps junction below 125C, but for full -40C to +125C operation, derate the clock frequency to 64 MHz or improve PCB copper pour to lower theta_JA to 30 C/W.
The DFSDM peripheral on STM32F413ZHT3 requires careful clock configuration - the DFSDM clock must be enabled in RCC before configuring the digital filter. The USB OTG FS internal PHY requires the VDDUSB pin to be supplied; on this package VDDUSB is internally bonded to VDD. The 144-LQFP package is NOT pin-compatible with the 100-LQFP or 64-LQFP STM32F4 variants despite similar marking schemes.
Информация о соответствии
RoHS compliant per ST product page. Industrial temperature grade -40C to +125C. Not AEC-Q100 qualified - choose STM32F413ZHT3 automotive variant for automotive use.
