Analog Devices

AD542SH - Low-Noise BiFET Op Amp, ±18V, TO-99

MPN: AD542SH ✓ Active
1 mV Vdss 25 pA Id TO-99, 8 pins Package
MOQ: 1 |

AD542SH Overview

The Analog Devices AD542SH is a single, precision BiFET-input operational amplifier specified for ±18 V operation, with a maximum input bias current of 25 pA, a slew rate of 13 V/µs, and a gain-bandwidth product of 1 MHz. The device is supplied in an 8-pin TO-99 hermetic metal-can package for applications requiring low input current and reliable operation in demanding analog signal paths.

A BiFET operational amplifier is a voltage-feedback amplifier whose field-effect-transistor input stage provides very low input bias current. This input characteristic places the AD542SH in the broader hierarchy of FET-input operational amplifiers, analog amplifiers, signal-conditioning ICs, and power-management-supporting semiconductor devices. Low input current is especially useful when the amplifier must interface with high-impedance sensors, transducers, photodetectors, or precision measurement networks without loading the source.

Key characteristics include a maximum input offset voltage of 1 mV, input offset drift of 15 µV/°C, a quiescent current of 1.5 mA, open-loop gain of 110 dB, and a listed common-mode rejection value of 80 dB. Its 13 V/µs slew rate supports comparatively fast large-signal transitions, while the 1 MHz gain-bandwidth product is suitable for precision gain, buffering, and general-purpose analog amplification. The AD542SH also provides overvoltage protection and can drive capacitive loads according to the manufacturer documentation.

The AD542SH belongs to the AD542, AD544, and AD547 precision BiFET family, which uses monolithic BiFET construction and laser-trimming technology. This combination targets applications in which conventional bipolar input stages would draw excessive bias current or introduce unacceptable source loading. The low-bias architecture is especially valuable in instrumentation, photodetector interfaces, and high-impedance sensor amplifiers, while the laser-trimmed offset characteristics support stable DC operation.

Typical uses include low-level sensor conditioning, photodiode and phototransistor amplification, buffered measurement inputs, precision current-to-voltage conversion, and gain stages in laboratory or industrial instrumentation. The hermetic TO-99 package can also suit equipment requiring a traditional metal-can mechanical format. Because the amplifier is a voltage-feedback device, feedback-network design, source impedance, load capacitance, and common-mode operating range remain central to stable operation.

When laying out a circuit using the AD542SH, keep feedback resistors close to the device and minimize parasitic capacitance on the output and inverting-input nodes. Check bias-current cancellation for high source impedances, because although the maximum input bias current is only 25 pA, even picoamp-level current can create meaningful offset across megaohm-class resistances. Confirm output swing, input common-mode range, and capacitive-load stability against the manufacturer operating table.

This page combines the AD542SH electrical characteristics, package details, application guidance, design notes, and family comparisons to support engineering selection and PCB implementation. It also organizes drop-in family options and clearly identifies which replacement questions require additional qualification before schematic or layout changes are approved.

Drop-in alternatives for AD542SH — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with AD542SH (same form factor and footprint) — differing in Maximum Input Bias Current, Package, Product Type.

Analog Devices
Maximum Input Bias Current: 25 pA maximum, warmed up
Package: Hermetically sealed TO-99 metal can
Product Type: Precision BiFET operational amplifier
Compare with AD542SH →

AD544SH

✅ Drop-In ⚠️ Specs Unverified
Analog Devices
📦 TO-99, 8 pins
Precision BiFET operational amplifier · 25 pA maximum, warmed up · -55°C to +125°C · Military S grade · Hermetically sealed TO-99 metal can · 8 terminals · Wire lead · Monolithic BiFET JFET input stage

Contact for price

View Datasheet →

AD547SH

✅ Drop-In ⚠️ Specs Unverified
📦 TO-99, 8 pins
Same 8-pin TO-99 footprint and BiFET input architecture; the AD547SH uses a different offset-voltage grade, with the AD542SH specified to 1 mV maximum while the AD547SH limit requires confirmation.

📋 Reference alternative (not in catalog)

AD544JH

✅ Drop-In ⚠️ Specs Unverified
📦 TO-99, 8 pins
Same 8-pin TO-99 pin arrangement and AD544 family electrical architecture; the AD542SH is rated at 25 pA maximum bias current and 13 V/µs slew rate, while the JH grade designation changes the qualification tier.

📋 Reference alternative (not in catalog)

AD547JH

✅ Drop-In ⚠️ Specs Unverified
📦 TO-99, 8 pins
Same 8-pin TO-99 pin arrangement and low-bias BiFET architecture; the JH grade designation provides a different qualification tier from AD542SH, with 25 pA maximum bias current and 13 V/µs slew rate retained as the AD542SH benchmarks.

📋 Reference alternative (not in catalog)

AD542JH

✅ Drop-In ⚠️ Specs Unverified
📦 TO-99, 8 pins
Same AD542 electrical architecture and 8-pin TO-99 footprint; the JH and SH designations identify different grade or qualification options while preserving the documented 25 pA bias-current and 13 V/µs slew-rate benchmarks.

📋 Reference alternative (not in catalog)

AD542SH Maximum Ratings & Electrical Characteristics

Product Type Single precision BiFET-input operational amplifier
Number of Channels 1 channel
Input Stage BiFET field-effect-transistor input
Maximum Input Bias Current 25 pA
Maximum Input Offset Voltage 1 mV
Input Offset Voltage Drift 15 µV/°C
Supply Voltage Range ±18 V
Quiescent Current 1.5 mA
Slew Rate 13 V/µs
Gain-Bandwidth Product 1 MHz
Open-Loop Gain 110 dB
Common-Mode Rejection 80 dB
Noise 2 V p-p
Input Protection Overvoltage protection
Capacitive-Load Capability Capacitive-load drive supported
Package TO-99, 8 pins
Mounting Type Through-hole metal-can package

AD542SH Pin Configuration

TO-99 Package Pinout Diagram TO-99 8-pin metal can precision op-amp, JEDEC. Leads on concentric circle, tab marks pin 1. 1 2 3 4 5 6 7 8 TO-99
Pin 1 NC — Not connected
Pin 2 IN- — Inverting input
Pin 3 IN+ — Non-inverting input
Pin 4 V- — Negative supply voltage
Pin 5 OFFSET NULL — Offset-voltage null adjustment
Pin 6 OUT — Amplifier output
Pin 7 V+ — Positive supply voltage
Pin 8 NC — Not connected

Typical Applications

AD542SH is suitable for 6 applications: High-Impedance Sensor Conditioning, Photodetector Signal Amplification, Precision Current-to-Voltage Conversion, Instrumentation Buffering, Industrial Control Signal Interface, Precision Audio and Analog Measurement.

🧩

High-Impedance Sensor Conditioning

The AD542SH is appropriate for front ends connected to photodiodes, high-resistance transducers, capacitive sensors, and other sources whose output impedance is high. Its maximum input bias current of 25 pA limits the error voltage caused by bias current flowing through the source impedance. The amplifier can therefore preserve a weak sensor signal before it reaches a subsequent ADC or measurement channel. Because source resistance also amplifies thermal and leakage effects, the design should include guarding, clean PCB leakage control, and resistor matching for bias-current cancellation. The 1 MHz gain-bandwidth product is sufficient for moderate-bandwidth instrumentation, while the 13 V/µs slew rate supports faster settling when the closed-loop gain and load permit it.

📷

Photodetector Signal Amplification

A photodiode or phototransistor can be connected to an AD542SH configured as a transimpedance or voltage-gain stage when the source generates currents too small for a conventional bipolar-input amplifier to handle efficiently. The AD542SH's 25 pA maximum bias current is particularly useful because it produces less unwanted photocurrent-equivalent error at the detector node. Its 110 dB open-loop gain supports accurate closed-loop gain when configured with practical feedback resistors. The 1 MHz gain-bandwidth product limits the bandwidth available after noise gain is accounted for, and the 13 V/µs slew rate must also be checked against the detector capacitance and selected feedback network. PCB layout should minimize guard-ring leakage and keep the detector input path away from high-impedance digital return currents.

⚡

Precision Current-to-Voltage Conversion

The AD542SH can implement a precision transimpedance amplifier for current-output sensors, optical receivers, or laboratory measurement circuits. Its low input bias current reduces the DC offset contribution associated with the input stage, while the 1 mV maximum input offset voltage supports accurate conversion at reasonable signal gains. The 1 MHz gain-bandwidth product defines the usable signal bandwidth after the noise gain and feedback resistance are considered. Feedback-resistor parasitics and input capacitance can alter stability, so component selection and compensation should be evaluated using the manufacturer's guidance. The low 1.5 mA quiescent current is also advantageous in portable instrumentation, although the total supply current will rise as the output drives load current.

🖥️

Instrumentation Buffering

The AD542SH can buffer an instrumentation or laboratory sensor before it reaches a downstream converter, multiplexer, or data-acquisition system. Its 25 pA maximum input bias current reduces loading of a high-output-resistance source, while the 110 dB open-loop gain helps minimize closed-loop gain error. A 1 MHz gain-bandwidth product is appropriate for many general-purpose measurement channels, but applications requiring substantially more bandwidth should re-evaluate the family choice. The 13 V/µs slew rate helps produce clean responses to step changes and supports capacitive loads within the documented operating conditions. Layout should keep the input and feedback nodes short, use a ground plane without splits beneath the amplifier, and provide local supply bypassing to prevent measurement noise from coupling into the signal path.

🏭

Industrial Control Signal Interface

The AD542SH is suitable for low-level control and feedback signals in industrial equipment when the interface source has high impedance and low current capability. The amplifier can condition sensor outputs or drive downstream control inputs while drawing only about 1.5 mA quiescent current. Its ±18 V rating supports circuits using positive and negative supply rails, but the actual operating limits must be checked against the selected grade and total supply voltage. The 1 mV maximum offset and 15 µV/°C drift establish important accuracy boundaries for slow-changing control signals. Industrial implementations should also include input protection, verified supply bypassing, and adequate separation from switching nodes. The TO-99 package provides a through-hole mechanical option for systems designed around metal-can operational amplifiers.

🎧

Precision Audio and Analog Measurement

The AD542SH can be used in low-level audio, laboratory, and analog measurement stages where input-current loading must remain small. The BiFET input stage, with bias current no greater than 25 pA, avoids the larger loading associated with conventional bipolar transistor inputs. The 13 V/µs slew rate can reproduce moderate-level audio transients, although the 1 MHz gain-bandwidth product makes the device more appropriate for instrumentation than wideband audio output stages. Its 110 dB open-loop gain is useful for accurate fixed-gain sections, and the listed 80 dB common-mode rejection can help reject common-mode interference when supply noise is properly bypassed. Signal-ground topology should be designed to avoid ground loops, and the metal-can package requires careful mechanical support and lead strain control.

Recommended Products Summary

AD542 Precision BiFET family member Used in: High-Impedance Sensor Conditioning, Photodetector Signal Amplification, Instrumentation Buffering, Industrial Control Signal Interface, Precision Audio and Analog Measurement AD544 Related low-bias amplifier family Used in: High-Impedance Sensor Conditioning, Precision Current-to-Voltage Conversion, Instrumentation Buffering, Precision Audio and Analog Measurement AD547 Related precision BiFET option Used in: Photodetector Signal Amplification, Precision Current-to-Voltage Conversion, Industrial Control Signal Interface
What is the AD542SH?
The AD542SH is a single precision BiFET-input operational amplifier from Analog Devices, specified for ±18 V operation and a maximum input bias current of 25 pA. According to the Analog Devices AD542 datasheet, it combines monolithic BiFET construction with laser trimming and is packaged in an 8-pin TO-99 metal can. Its 1 MHz gain-bandwidth product, 13 V/µs slew rate, and 1.5 mA quiescent current make it appropriate for high-impedance precision analog signal paths.
Where can I download the AD542SH datasheet PDF?
The official AD542SH datasheet and product documentation are available from the Analog Devices AD542 product page at https://www.analog.com/en/products/ad542.html. The AD542SH is the TO-99 packaged member of the AD542 precision BiFET family. Use the manufacturer datasheet to confirm the exact pin assignments, electrical test limits, common-mode range, output swing, and operating-temperature grade before finalizing a circuit.
Where can I find the AD542SH pinout?
The AD542SH pinout is shown in the pin-description table of the Analog Devices AD542 datasheet. The device uses an 8-pin TO-99 package with the conventional operational-amplifier functions arranged around the can: offset-null positions, inverting and non-inverting inputs, positive and negative supply connections, and output. Because metal-can numbering can vary across families, assign tracks from the package drawing rather than relying only on a generic TO-99 pinout.
What are the key specifications of AD542SH that engineers should know?
The principal AD542SH specifications are ±18 V supply operation, 25 pA maximum input bias current, 1 mV maximum input offset voltage, 15 µV/°C offset drift, 1.5 mA quiescent current, 13 V/µs slew rate, 1 MHz gain-bandwidth product, and 110 dB open-loop gain. The Analog Devices AD542 datasheet also identifies 80 dB common-mode rejection, overvoltage protection, and capacitive-load-drive capability.
Is the AD542SH suitable for high-impedance sensors?
Yes, the AD542SH is well suited to high-impedance sensor interfaces because its maximum input bias current is only 25 pA. That low current minimizes the voltage error created when bias current flows through a high source resistance. According to the Analog Devices AD542 datasheet, the BiFET input stage is designed for substantially lower bias current than conventional bipolar input stages, making the amplifier suitable for photodetectors, high-resistance transducers, and precision buffer nodes.
What is the difference between AD542SH and AD542?
AD542SH is the specific 8-pin TO-99 ordering designation associated with the Analog Devices AD542 precision BiFET family, while AD542 is the family designation used on the product page and datasheet. The family is defined by a maximum input bias current of 25 pA, low offset voltage, laser trimming, and low quiescent current. The SH suffix identifies the particular package and ordering configuration, so mechanical and grade details should be taken from the ordering guide.
AD542SH vs AD544SH - which is better for a precision amplifier?
The AD542SH and AD544SH are both members of the Analog Devices precision BiFET family and use the same general low-bias input architecture. The AD542 datasheet lists family characteristics including 25 pA maximum input bias current, low quiescent current, high open-loop gain, and laser trimming. The AD544SH may be preferable where its distinct input-offset and dynamic specifications better match the circuit, but the final choice requires comparing the exact operating table for each orderable MPN.
When should I choose the AD542SH over another AD54x BiFET amplifier?
Choose the AD542SH when the design needs a 25 pA maximum bias current, 1 MHz gain-bandwidth product, 13 V/µs slew rate, and an 8-pin TO-99 package. It is especially appropriate for high-impedance sensor and photodetector interfaces where source loading must remain low. Select another family member instead when its lower offset limit, precision grade, temperature rating, or electrical limits are specifically required for the application.
Is the AD542SH the same as AD544SH?
No. The AD542SH and AD544SH are related precision BiFET operational amplifiers, not identical orderable devices. Both belong to the AD542, AD544, and AD547 family described by Analog Devices as monolithic BiFET products with laser trimming and bias currents as low as 25 pA. Their individual offset-voltage, drift, slew-rate, temperature-grade, and exact test-limit differences must be compared before treating one as a substitute.
What can replace the AD542SH?
A valid replacement for the AD542SH should have the same 8-pin TO-99 footprint, pin-compatible assignments, suitable input bias current, offset voltage, slew rate, and supply-voltage rating. AD544SH and AD547SH family options are the closest starting points for evaluation, but they are not automatically interchangeable without checking their exact specifications. Use the manufacturer datasheet and an approved cross-reference review before approving a replacement.
What is the best Analog Devices equivalent for the AD542SH?
The closest Analog Devices family candidates for the AD542SH are the AD544SH and AD547SH, because they belong to the same precision BiFET family and are available in related orderable configurations. The Analog Devices AD542 datasheet identifies the AD542, AD544, and AD547 series as a family with very low input bias current. Exact equivalence still requires pinout, package, offset, drift, temperature, and dynamic-parameter verification.
How much power does the AD542SH consume?
The AD542SH has a listed quiescent current of 1.5 mA, so supply current under no-load conditions is close to that value, subject to the exact test conditions. The Analog Devices AD542 datasheet identifies low quiescent current as a family feature. Actual power depends on both supply rails, output current, load impedance, and operating temperature; calculate it as the sum of rail voltage multiplied by supply current plus output-stage dissipation.
Can the AD542SH drive a capacitive load?
The AD542SH is listed with capacitive-load-drive capability, making it more practical for lightly capacitive loads than an ideal voltage-feedback amplifier model may suggest. According to the Analog Devices AD542 product documentation, this characteristic belongs to the high-performance BiFET family. The allowable capacitive load remains dependent on gain, output voltage, frequency, and compensation network, so evaluate the relevant stability guidance before adding large load capacitance.
Where can I buy AD542SH online?
The AD542SH can be requested through the Request a Quote form on this XAIPART product page. The form supports current sourcing review without relying on static pricing. Request the exact AD542SH ordering code, desired package quantity, delivery schedule, and traceability requirements so the supply team can confirm current availability and manufacturing status.
What is the price and lead time of AD542SH?
Current unit pricing, available quantity, minimum order quantity, and lead time for AD542SH are handled through the Request a Quote form on this page. The request should identify the exact AD542SH MPN and any required grade, inspection, or documentation. This approach keeps commercial information current while allowing the supply team to confirm the correct package variant and production availability.

Engineering reference data for AD542SH — comparison, design guidance, and compliance information.

Selection Guide

Choose the AD542SH when the circuit is dominated by source impedance rather than bandwidth and requires a conventional 8-pin TO-99 operational amplifier with a maximum input bias current of 25 pA. Its 1 mV offset limit, 15 µV/°C drift, 110 dB open-loop gain, 13 V/µs slew rate, and 1 MHz gain-bandwidth product make it appropriate for photodetectors, precision current-to-voltage conversion, high-impedance sensors, and laboratory instrumentation. Consider AD544SH when its offset and dynamic characteristics better fit the signal chain, and AD547SH when its distinct offset grade provides a better accuracy match. The JH variants can be evaluated where a different qualification tier is required. Every proposed substitution must be checked for exact pinout, package, bias current, offset, drift, bandwidth, slew rate, supply range, temperature grade, and capacitive-load behavior before schematic approval.

Comparison with Alternatives

Parameter This Product AD544SH AD547SH AD544JH AD547JH AD542JH
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package TO-99, 8 pins TO-99, 8 pins TO-99, 8 pins TO-99, 8 pins TO-99, 8 pins TO-99, 8 pins
Product Type Precision BiFET-input operational amplifier Precision BiFET-input operational amplifier Precision BiFET-input operational amplifier Precision BiFET-input operational amplifier Precision BiFET-input operational amplifier Precision BiFET-input operational amplifier

Key Differentiators

  • Very low input bias current for precision signal conditioning (vs AD542JH)
  • Defined dynamic performance for measurement circuits (vs AD544SH)
  • TO-99 mechanical compatibility within the precision BiFET family (vs AD547SH)

Design Notes

Route the non-inverting input, inverting input, and feedback components as short and compact as practical. High-impedance bias current is useful only if the board does not introduce comparable leakage through contaminated connectors, flux residue, or humid board surfaces. Use a guarded or solder-masked input node where appropriate, avoid copper underneath the sensitive input path, and keep the inverting node away from switching-power and digital return paths. The 25 pA maximum bias-current specification defines the amplifier itself, not the leakage budget of the complete PCB assembly.

Calculate amplifier dissipation from both supply rails rather than treating ±18 V as a single supply condition. Estimated: with a 1.5 mA quiescent current, 15 V on each rail, and an output near ground, quiescent dissipation is approximately 45 mW before output-current loading. Actual dissipation rises when the output conducts current and depends on the output voltage and load. Verify the selected grade's maximum supply voltage, total supply voltage, output swing, and power limitations before applying ±18 V.

Do not assume that a common TO-99 outline guarantees identical pin assignments. Confirm the AD542SH pin-description table, including offset-null and no-connect positions, before laying out the PCB. Also avoid using the offset-null terminals for permanent adjustment unless the circuit requires calibration. When replacing AD542SH with an AD544 or AD547 family device, check the exact offset-voltage limit, offset drift, slew rate, gain-bandwidth product, input bias current, temperature grade, and supply requirements; a shared 8-pin package alone does not establish functional equivalence.

Account for the 1 MHz gain-bandwidth product when selecting feedback values and expected closed-loop bandwidth. At a noise gain of 10, the approximate signal bandwidth available from the gain-bandwidth limit is only 100 kHz before additional poles and stability effects are considered. The 13 V/µs slew rate also imposes a large-signal limit, and the output must remain within its specified swing. For capacitive loads, use a series isolation resistor or another compensation method when necessary to prevent ringing or instability.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The AD542SH is a precision analog operational amplifier rather than an automotive-qualified device. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified in the referenced product information.

Data verified on: 2026-11-14 — data verified and curated by XAIPART's component engineering team

Related Searches

AD542SH datasheet AD542SH datasheet pdf AD542SH pinout AD542SH TO-99 pinout AD542SH specifications AD542SH 25pA bias current AD542SH 13V/us slew rate AD542SH equivalent AD542SH replacement AD542SH vs AD544SH AD542SH high impedance sensor AD542SH photodiode amplifier Analog Devices AD542SH AD542SH price AD542SH stock

Related Components & Terms

Analog Devices AD542SH AD542 AD544 AD547 AD544SH AD547SH AD544JH AD547JH AD542JH BiFET operational amplifier FET-input operational amplifier voltage-feedback amplifier precision amplifier low-dropout regulator linear regulator voltage regulator power management IC semiconductor TO-99 package 8-pin metal-can package through-hole package surface mount input bias current input offset voltage gain-bandwidth product slew rate quiescent current open-loop gain common-mode rejection overvoltage protection
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details