AFS600-PQG208I - 600K Gate Flash Fusion FPGA | Microchip
MPN: AFS600-PQG208I ✓ ActiveAFS600-PQG208I Overview
A Fusion mixed-signal FPGA is an FPGA that combines programmable digital logic with configurable analog resources, embedded flash memory, clock generation, and clock-management circuitry in a monolithic device. In the product hierarchy, it belongs to the FPGA and CPLD class of reconfigurable digital and mixed-signal semiconductors. Its nonvolatile flash architecture distinguishes it from SRAM-based FPGAs that generally require configuration data to be reloaded after each power cycle.
The principal device characteristics include 600,000 system gates, 1.5 V operation, CMOS logic, and the 130 nm process node. The Fusion family integrates configurable analog blocks, large embedded flash-memory blocks, comprehensive clock-generation and management circuitry, and high-performance flash-based programmable logic. This combination supports designs requiring both digital control and analog signal-path functionality on one device.
The architecture is organized around nonvolatile flash-based programmable logic rather than volatile configuration RAM. According to the available family documentation, programmed data remains stored when the device is powered off, and Live at Power-Up permits configured circuits to become active at power-up. The seven-metal-layer 130 nm process provides the physical implementation basis for the integrated digital, analog, memory, and clock-management blocks.
Typical uses include industrial control and automation, communications equipment, embedded monitoring, signal processing, and mixed-signal instrumentation. The AFS600 family is particularly relevant where a board-level design benefits from configurable analog blocks, embedded nonvolatile memory, programmable logic, and integrated clock resources. Its 1.5 V supply requirement also makes careful rail design and decoupling essential.
When laying out a design around the AFS600-PQG208I, use the manufacturer documentation for the exact 208-pin assignments and power requirements. The available listing identifies the package as 208-BFQFP, while one third-party specification page inconsistently describes a 256-pin BGA; the exact package drawing and pin table should therefore be checked against the appropriate order-code documentation before PCB release.
This page combines the verified distributor specifications, manufacturer family information, package observations, procurement constraints, and same-family alternative analysis. It also distinguishes documented facts from missing package, pricing, pinout, and lifecycle details so engineers can make informed sourcing and design decisions.
Drop-in alternatives for AFS600-PQG208I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
AFS600-PQG208
✅ Drop-InContact for price
View Datasheet →AFS600-PQG208I Maximum Ratings & Electrical Characteristics
| Product Type | Fusion mixed-signal FPGA |
| System Gates | 600000 gates |
| Maximum Stated Frequency | 1098.9 MHz |
| Supply Voltage | 1.5 V |
| Logic Family | CMOS |
| Process Technology | 130 nm CMOS |
| Metal Layers | 7 layers |
| Configuration Memory | Nonvolatile flash |
| Power-Off Data Retention | Program retained when powered off |
| Power-Up Feature | Live at Power-Up (LAPU) |
| Integrated Functions | Configurable analog, embedded flash, clock generation, and clock management |
| Package | 208-pin BFQFP |
| Package Pitch | 0.5 mm |
| Operating Temperature | 0 C to 70 C |
| Programmable Logic | Flash-based programmable logic |
| RoHS Status | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
| Lead-Free Status | unknown |
| Halogen-Free Status | unknown |
AFS600-PQG208I 0.5 mm Pin Configuration Guide
Pin configuration for AFS600-PQG208I (0.5 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for AFS600-PQG208I.
Refer to the datasheet for full pin configuration.
Typical Applications
AFS600-PQG208I is suitable for 6 applications: Industrial Control and Automation, Communications and Signal Processing, Embedded Monitoring and Instrumentation, Programmable Power and Control, Data Acquisition Systems, Secure Embedded Control.
Industrial Control and Automation
The AFS600-PQG208I fits industrial control equipment that combines deterministic programmable logic with configurable analog measurement or actuation functions. Its 600000 system gates and 130 nm flash-based CMOS process provide substantial configurable logic capacity, while the 1.5 V supply supports integration with modern low-voltage control electronics. Nonvolatile configuration retention is valuable when the controller must preserve its logic after an unexpected power interruption, and Live at Power-Up allows the programmed system to resume operation at power restoration. Engineers should confirm the exact analog resources, I/O standards, and industrial temperature requirements from the manufacturer documentation. The available verified data confirms the 0 C to 70 C operating range for the target listing, so higher-temperature industrial installations require explicit qualification.
Recommended
Communications and Signal Processing
The AFS600-PQG208I can serve as the programmable control and signal-processing element in communications equipment where a monolithic mixed-signal implementation simplifies the board architecture. Its 600000 system gates provide capacity for protocol logic, state machines, data paths, and supervisory functions, while the Fusion family's configurable analog blocks and comprehensive clock-generation circuitry can support mixed-signal designs. The 1098.9 MHz maximum stated frequency indicates substantial device performance, although engineers must consult the full timing documentation for the exact clock and I/O constraints. Flash-based configuration retains the programmed design during power-off, while Live at Power-Up supports rapid recovery after power restoration.
Recommended
Embedded Monitoring and Instrumentation
The AFS600-PQG208I is appropriate for embedded monitoring systems that need programmable digital logic alongside configurable analog functions in one FPGA. The 600000-gate device can host acquisition control, filtering, calibration, data formatting, and communication logic, while the integrated analog and clock resources reduce the number of discrete devices required. Its nonvolatile flash configuration helps preserve calibration or control logic across power cycles, and Live at Power-Up can shorten recovery time after an outage. The target operates from a 1.5 V supply, so the system designer should provide stable, low-noise supply distribution and verify decoupling recommendations in the manufacturer documentation. Signal integrity at analog inputs and FPGA I/O boundaries must be evaluated separately from the device's headline gate capacity.
Recommended
Programmable Power and Control
The AFS600-PQG208I can implement programmable control, sequencing, and supervisory logic for power systems that also benefit from configurable analog functions. Its 600000 system gates support complex control algorithms, fault handling, communication, and timing functions, while integrated clock-generation and management circuitry helps organize internal and external clock domains. Because configuration is stored in nonvolatile flash, the controller can retain its programmed operating sequence when power is removed. Live at Power-Up supports deterministic reactivation after power restoration. The 1.5 V operating requirement places careful emphasis on supply regulation, startup behavior, and decoupling, while the verified 0 C to 70 C target rating must be checked against enclosure temperature and worst-case thermal conditions.
Recommended
Data Acquisition Systems
The AFS600-PQG208I fits data-acquisition designs that combine analog conditioning resources, configurable logic, embedded nonvolatile storage, and clock management in a single Fusion device. The 600000-gate capacity can support sampling control, digital filtering, buffer management, calibration tables, and data-transfer logic, while the configurable analog blocks expand design flexibility. The device's flash-based configuration allows the acquisition algorithm and control layout to remain in the FPGA when power is off. Live at Power-Up enables configured acquisition logic to resume without a separate volatile-memory reload stage. For accurate results, however, the analog signal path, reference sources, input bandwidth, and clock jitter must be analyzed independently of the 1098.9 MHz maximum stated frequency, which is not itself an analog-accuracy specification.
Recommended
Secure Embedded Control
The AFS600-PQG208I can support embedded control systems that benefit from retaining programmed logic in nonvolatile flash memory. Because the configuration remains stored during power-off, the FPGA can restart with its established control logic rather than depending on an external host to reload volatile configuration after every interruption. The 600000 system gates and integrated clock-management resources provide room for control, diagnostics, and communication functions. Live at Power-Up further supports deterministic startup behavior when paired with correctly designed reset and power-sequencing circuits. For security-sensitive equipment, engineers should treat configuration access and system boot integrity as separate design requirements. The available data does not provide cryptographic capabilities or security certification, so the manufacturer documentation must be reviewed before assuming any security rating or protected-configuration behavior.
Recommended
Recommended Products Summary
Engineering reference data for AFS600-PQG208I — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | AFS600-PQG208 |
|---|---|---|
| Manufacturer | Microchip Technology | Microchip Technology |
| Package | 208-pin BFQFP | 208-pin BFQFP - same package family |
| System Gates | 600000 gates | 600000 gates |
| Maximum Stated Frequency | 1098.9 MHz | 1098.9 MHz |
| Supply Voltage | 1.5 V | 1.5 V |
| Logic Family | CMOS | CMOS |
| Process Technology | 130 nm flash-based CMOS | 130 nm flash-based CMOS |
| Configuration Memory | Nonvolatile flash | Nonvolatile flash |
| Power-Up Feature | Live at Power-Up (LAPU) | Live at Power-Up (LAPU) |
Key Differentiators
- Verified target includes the I suffix (vs AFS600-PQG208)
- 600000-gate mixed-signal capacity (vs AFS600-PQG208)
- 1.5 V operation and nonvolatile configuration (vs AFS600-PQG208)
Design Notes
Do not release the PCB footprint until the package identity has been reconciled against the manufacturer documentation. DigiKey identifies the target as a 208-pin BFQFP with 0.5 mm pitch, whereas one third-party specification page labels it as a 256-pin BGA. Use the order-code package drawing, pin table, and land pattern associated with AFS600-PQG208I. This is especially important because an incorrect BGA-versus-BFQFP interpretation would produce a mechanically unusable board.
Design the power tree around the documented 1.5 V supply and obtain the exact current limits, tolerances, and sequencing rules from the manufacturer datasheet. Place local high-frequency decoupling and bulk capacitors close to their designated supply pins using the manufacturer's layout guidance, and keep switching-regulator and digital-clock return currents out of sensitive analog areas. The supplied data does not include current-consumption or capacitor-value requirements, so those values should not be inferred from generic FPGA designs.
Treat the 1098.9 MHz value as a maximum stated device frequency, not as a guaranteed signal bandwidth at every I/O or analog block. Validate edge rates, clock jitter, output loading, and external trace topology against the complete timing specifications. For mixed-signal designs, maintain separation between sensitive analog paths and high-speed digital routing, and validate grounding and return-current continuity on the 208-pin package rather than relying on a general-purpose FPGA layout.
Do not substitute the AFS600-PQG208 solely because the published gate count, voltage, and frequency appear identical. The missing I suffix may represent a different commercial or temperature grade, and the available results do not quantify that difference. Obtain the manufacturer ordering guide and compare the complete suffix definitions before declaring a drop-in replacement. This check is particularly important for industrial equipment expected to operate across its full enclosure temperature range.
Compliance Information
The supplied verified results do not provide RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations for this order code. AEC-Q100 is marked not applicable because the target is an FPGA rather than an automotive-qualified device, and no AEC-Q100 qualification evidence was provided.
