IR38062MTRPBF - 15A Digital Sync Buck Regulator | Infineon
MPN: IR38062MTRPBF ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $7.5 | $7.50 |
| 10 | $6.75 | $67.50 |
| 100 | $5.95 | $595.00 |
| 500 | $5.4 | $2,700.00 |
| 1,000 | $4.85 | $4,850.00 |
Drop-in alternatives for IR38062MTRPBF — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
IR38062M
✅ Drop-In📋 Reference alternative (not in catalog)
IR3812MTR1PBF
✅ Drop-In📋 Reference alternative (not in catalog)
IR3847MTRPBF
✅ Drop-In ⚠️ 参数待验证📋 Reference alternative (not in catalog)
IR3894MTRPBF
✅ Drop-In ⚠️ 参数待验证📋 Reference alternative (not in catalog)
IR3811MTRPBF
✅ Drop-In ⚠️ 参数待验证📋 Reference alternative (not in catalog)
IR38062MTRPBF Maximum Ratings & Electrical Characteristics
| Topology | Synchronous Buck (Step-Down) |
| Input Voltage Range | 5.5 V to 21 V |
| Output Voltage Range | 0.5 V to 0.875 x PVin (max 18.375 V) |
| Maximum Output Current | 15 A |
| Reference Accuracy | 0.5 % |
| Switching Frequency Range | 400 kHz to 1.5 MHz |
| Number of Outputs | 1 |
| Output Type | Adjustable |
| Digital Interface | PMBus |
| Integrated MOSFETs | Yes (high-side and low-side) |
| Internal LDO for Single-Supply Operation | Yes (21 V) |
| Soft Start | Internal, programmable |
| Package | 34-PowerVFQFN (PQFN, 5 x 7 mm) |
| Mounting Type | Surface Mount |
| RoHS Status | Compliant (PBF suffix) |
IR38062MTRPBF 34-powervfqfn (pqfn, 5 x 7 mm) Pin Configuration Guide
Complete pinout information for IR38062MTRPBF (34-powervfqfn (pqfn, 5 x 7 mm) package). This power device features gate, drain, and source terminals. For non-polarized packages, refer to the manufacturer datasheet for exact pin 1 orientation and footprint details. Common applications include power supply design, motor driving, and load switching.
No detailed pinout data available for IR38062MTRPBF.
Refer to the datasheet for full pin configuration.
Safe Operating Area (SOA) & Thermal Characteristics
No official SOA curve available for this component. Always operate within absolute maximum ratings specified in the datasheet. Ensure adequate cooling and derate as needed.
Typical Applications
IR38062MTRPBF is suitable for 6 applications: Telecom and Networking POL Converters, FPGA and ASIC Core/IO Power, Server and Datacenter VRM, Industrial Automation Controllers, Graphics Card and GPU Memory Rails, Test and Measurement Equipment.
Telecom and Networking POL Converters
The IR38062MTRPBF's 15 A continuous output and 0.5 V to 18.375 V adjustable range make it a strong fit for telecom and networking POL rails that power switching ASICs, PHYs, and packet processors. Its 0.5 percent VOUT accuracy keeps voltage variation within ASIC tolerance bands, while the PMBus interface lets the system controller read real-time IOUT and temperature, which is essential for energy-efficient Ethernet (EEE) power-state transitions. Operating from a single 5.5 V to 21 V supply removes the need for a separate 5 V bias rail, simplifying board layout.
Recommended
FPGA and ASIC Core/IO Power
FPGAs and ASICs typically demand 0.85 V to 3.3 V core and IO rails at 10-15 A with tight accuracy, which the IR38062MTRPBF delivers at switching frequencies up to 1.5 MHz. The 400 kHz-1.5 MHz programmable range allows designers to optimize efficiency versus transient response, while the exposed thermal pad on the 34-pin PQFN package handles continuous 15 A dissipation without external heatsinking. PMBus margining supports FPGA bitstream characterization voltage sweeps.
Recommended
Server and Datacenter VRM
Datacenter motherboards and accelerator cards require dense POL conversion with telemetry for thermal and power management, which the IR38062MTRPBF provides via its PMBus interface. The 15 A capability covers processor auxiliary rails, DDR termination, and PCIe retimer supplies, while the integrated high-side and low-side MOSFETs shrink the BOM versus discrete designs. The Rt/Sync pin allows phase-shifted synchronization between multiple IR38062 instances to reduce input ripple.
Recommended
Industrial Automation Controllers
Industrial PLCs, motor controllers, and factory automation modules operate from 24 V backplanes that the IR38062MTRPBF steps down to 3.3 V, 5 V, and sub-1 V rails with telemetry for predictive maintenance. The -40 C to +125 C operating range and RoHS-compliant PQFN package suit factory floor environments. PMBus fault reporting reduces service truck rolls by surfacing regulator health to the host controller before catastrophic failure.
Recommended
Graphics Card and GPU Memory Rails
Modern GPUs and GDDR6 memory require 15 A-capable POL converters with precise voltage control for power-state transitions. The IR38062MTRPBF's 0.5 percent accuracy and PMBus VOUT trim allow real-time GPU voltage optimization during gaming, compute, and idle states. Its 1.5 MHz switching frequency shrinks output inductor and capacitor size, freeing board area for GPU package and memory routing.
Recommended
Test and Measurement Equipment
Bench power supplies, oscilloscopes, and signal generators need clean, low-ripple rails that the IR38062MTRPBF delivers through its synchronous topology and programmable frequency. The PMBus interface supports manufacturing test scripts that read back VOUT and IOUT for automated calibration, while the exposed thermal pad ensures stable operation across long test campaigns. Telemetry logs temperature and fault events for quality traceability.
Recommended
Recommended Products Summary
Engineering reference data for IR38062MTRPBF — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | IR38062M | IR3812MTR1PBF | IR3847MTRPBF | IR3894MTRPBF | IR3811MTRPBF |
|---|---|---|---|---|---|---|
| Package | 34-PowerVFQFN (PQFN, 5 x 7 mm) | 34-PowerVFQFN (PQFN, 5 x 7 mm) - same | 34-PowerVQFN (PQFN) - same footprint | 34-PowerVQFN (PQFN) - same footprint | 34-PowerVQFN (PQFN) - same footprint | 34-PowerVQFN (PQFN) - same footprint |
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon |
| Output Current | 15 A | 15 A | 6 A | 12 A | 12 A | 7 A |
| Input Voltage Range | 5.5 V to 21 V | 5.5 V to 21 V | 5.5 V to 21 V | 5.5 V to 21 V | 5.5 V to 21 V | 5.5 V to 21 V |
| Digital Interface | PMBus | PMBus | PMBus | Analog (no PMBus) | Analog (no PMBus) | Analog (no PMBus) |
| Switching Frequency | 400 kHz to 1.5 MHz | 400 kHz to 1.5 MHz | 250 kHz to 1.5 MHz | 400 kHz to 1.5 MHz | 300 kHz to 1.5 MHz | 250 kHz to 1.5 MHz |
| Reference Accuracy | 0.5 % | 0.5 % | 0.5 % | 0.5 % | 0.6 % | 0.5 % |
| Integrated MOSFETs | Yes (HS + LS) | Yes (HS + LS) | Yes (HS + LS) | Yes (HS + LS) | Yes (HS + LS) | Yes (HS + LS) |
| Unit Price (qty 1, approx.) | $7.50 | Similar (same die) | $5.20 | $4.80 | $4.90 | $4.30 |
Key Differentiators
- Higher continuous output current than IR3812MTR1PBF (vs IR3812MTR1PBF)
- PMBus digital interface versus analog SupIRBuck parts (vs IR3847MTRPBF)
- Single-supply 21 V operation via internal LDO (vs IR3811MTRPBF)
Design Notes
At 15 A continuous load with a typical 12 V to 1.0 V conversion, the IR38062MTRPBF dissipates approximately 2-3 W inside the PQFN-34 package. The exposed thermal pad must be soldered to a PCB copper pour of at least 1 square inch on top layer, plus thermal vias to inner copper planes, to keep junction temperature rise within the 125 C maximum. Designers should validate thermal performance with a real PCB under worst-case airflow conditions.
Place input ceramic capacitors (typically 2 x 22 uF X7R 25 V) as close as possible to the PVin and PGND pins to minimize switching loop inductance. Use a 4-layer PCB with a dedicated ground plane and place the output inductor and capacitors adjacent to the SW and VOUT pins. PMBus traces (SCL, SDA, SALERT) should be routed away from SW node to avoid noise coupling.
The Rt/Sync pin should be connected to the external resistor with a short trace to AGND to avoid noise pickup that could shift switching frequency. Place the feedback resistor divider close to the FB pin with the upper resistor tied to VOUT_SENSE and the lower to AGND_SENSE for accurate voltage regulation. Avoid routing high-current paths under the IC to prevent ground bounce.
Do not exceed the 21 V maximum input voltage, as overvoltage can damage the internal MOSFETs and LDO. Ensure the PMBus address pins (ADR0/ADR1) are tied to AGND, VDD, or left floating according to the desired address; incorrect addressing causes communication failures. The internal soft-start capacitor setting should not be set shorter than the output capacitor charge time, or inrush current may trip OCP.
Compliance Information
RoHS compliance indicated by PBF suffix per Infineon ordering convention. AEC-Q100 not applicable (industrial/commercial grade). Halogen-free status not confirmed in available snippets.
