Microchip Technology

MCP6004-E/ST - 1MHz Quad RRIO Op Amp | Microchip

MPN: MCP6004-E/ST ✓ Active
1.8 V to 5.5 V Vdss 100 uA typical per amplifier Id 14-lead TSSOP Package
MOQ: 1 |

MCP6004-E/ST Overview

The Microchip Technology MCP6004-E/ST is a quad, general-purpose operational amplifier with a 1 MHz gain-bandwidth product, 100 uA typical quiescent current, and rail-to-rail input and output operation in a 14-lead TSSOP package. It operates from 1.8 V to 5.5 V, making it suitable for low-voltage sensor, signal-conditioning, and mixed-signal systems.

An operational amplifier is an analog building block that amplifies the difference between two input voltages. In the broader semiconductor hierarchy, the MCP6004-E/ST is an operational amplifier, analog amplifier, and linear semiconductor. Its rail-to-rail inputs accept signals extending close to the positive and negative supply rails, while rail-to-rail outputs can swing close to those limits under suitable load conditions.

Key features include a 1 MHz gain-bandwidth product, 100 uA typical quiescent current, and operation across a 1.8 V to 5.5 V supply range. The device provides four amplifier channels in one package, reducing component count and board area for quad-signal paths. Its low-noise characteristics and 76 dB ESD protection make it appropriate for general-purpose analog front ends.

The MCP6004 family uses a low-power CMOS operational-amplifier architecture optimized for portable and embedded equipment. A 1 MHz bandwidth supports low-frequency signal amplification, filtering, buffering, and feedback control. The quad configuration allows four independent channels to share the same supply pins, simplifying power distribution while preserving channel-to-channel functional separation.

Typical applications include battery-powered sensor interfaces, buffered ADC inputs, current sensing, portable instrumentation, audio preamplification, and general feedback loops. The 1.8 V minimum supply voltage is especially useful for energy-harvesting, edge-sensing, and embedded systems operating from low-capacity batteries.

When designing around the MCP6004-E/ST, place each bypass capacitor close to the supply pins and route sensitive input traces away from switching nodes. Because the device is intended for general-purpose and low-frequency work, verify closed-loop stability, capacitive loading, output swing, and noise performance before using it in precision or high-bandwidth instrumentation.

This page combines the manufacturer specifications with package details, application guidance, and same-package amplifier comparisons. It helps engineers distinguish the standard MCP6004-E/ST from industrial-temperature, tape-ordering, and related amplifier variants before committing a 14-TSSOP design to production.

Drop-in alternatives for MCP6004-E/ST — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MCP6004-E/ST (same form factor and footprint) — differing in Amplifier Type, Gain-Bandwidth Product, Input Offset Voltage, Number of Channels, Package.

Microchip Technology
Amplifier Type: General-purpose CMOS operational amplifier
Gain-Bandwidth Product: 2.8 MHz
Input Offset Voltage: <2 mV

MCP6004-I/ST

✅ Drop-In
📦 14-lead TSSOP

📋 Reference alternative (not in catalog)

MCP6004T-I/ST

✅ Drop-In
📦 14-lead TSSOP
Industrial-temperature suffix differs from E and the order code includes a tape-ordering designation; core electrical ratings differ by 0% according to the MCP6004 family naming structure.

📋 Reference alternative (not in catalog)

MCP6004T-E/STVAO

✅ Drop-In
📦 14-lead TSSOP
Alternate order code retains the E temperature grade and 14-TSSOP construction while changing production ordering details; listed core electrical ratings differ by 0%.

📋 Reference alternative (not in catalog)

MCP6024T-E/ST

✅ Drop-In
📦 14-lead TSSOP
Same 14-TSSOP package and 1.8 V to 6 V operating class, but the MCP6024 family's offset and noise specifications must be compared with the MCP6004's 4.5 mV typical offset.

📋 Reference alternative (not in catalog)

MCP602T-E/ST

✅ Drop-In
Microchip Technology
📦 14-lead TSSOP
General-purpose CMOS operational amplifier · 2 channels · 2.8 MHz · 230 uA · <2 mV · 2.7 V to 6.0 V · Rail-to-rail

Contact for price

View Datasheet →

MCP6004-E/ST Maximum Ratings & Electrical Characteristics

Amplifier Type Quad general-purpose operational amplifier
Number of Channels 4 channels
Gain-Bandwidth Product 1 MHz
Supply Voltage Range 1.8 V to 5.5 V
Quiescent Current 100 uA typical per amplifier
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Input Bias Current 1 pA typical
Input Offset Current 1 pA typical
Input Offset Voltage 4.5 mV typical
Voltage Noise Density 28 nV/sqrt(Hz) at 1 kHz
Input Voltage Drift 2 uV/C typical
Slew Rate 600 V/ms
Operating Temperature Range -40 C to +125 C
Package 14-lead TSSOP
Package Width 4.40 mm
Mounting Type Surface mount
ESD Protection 76 dB
RoHS Status Compliant
Automotive Qualification Not applicable

MCP6004-E/ST 4.40 mm Pin Configuration Guide

Pin configuration for MCP6004-E/ST (4.40 mm package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

4.40 mm package pinout diagram for MCP6004-E/ST

No detailed pinout data available for MCP6004-E/ST.

Refer to the datasheet for full pin configuration.

Typical Applications

MCP6004-E/ST is suitable for 6 applications: Battery-Powered Sensor Signal Conditioning, Buffered ADC and DAC Interfaces, Portable Instrumentation and Measurement, Audio Preamplification and Headphone Buffers, Current Sensing and Power-Control Loops, Embedded IoT and Edge-Sensing Systems.

🧩

Battery-Powered Sensor Signal Conditioning

The MCP6004-E/ST fits battery-powered sensor front ends because it operates from 1.8 V to 5.5 V and draws 100 uA typical quiescent current per amplifier. Four channels can buffer sensor outputs, amplify strain-gauge or resistive-sensor signals, and provide active filtering without requiring a separate amplifier for each signal path. Rail-to-rail inputs are useful when the sensor output approaches the available supply range, although offset, bias current, and noise should be checked against the sensor source impedance.

📊

Buffered ADC and DAC Interfaces

The MCP6004-E/ST can provide low-impedance drive for successive-approximation ADC inputs, DAC output buffers, and sample-and-hold isolation stages. Its 1 MHz gain-bandwidth product supports signal paths up to hundreds of kilohertz when closed-loop gain and stability requirements permit. Four independent channels make it practical to buffer several converter pins, while 100 uA typical quiescent current per channel helps control power in portable acquisition systems. Verify capacitive loading and settling time at the selected gain.

🖥️

Portable Instrumentation and Measurement

For handheld meters, environmental monitors, and compact laboratory instruments, the MCP6004-E/ST combines four general-purpose channels with a 1.8 V minimum supply and 100 uA typical quiescent current. The amplifier can condition slow sensor signals, implement active low-pass filters, buffer resistive dividers, and drive control-loop inputs. Its 28 nV/sqrt(Hz) voltage-noise density at 1 kHz is a useful starting point for moderate-accuracy measurements, but precision designs must also account for 4.5 mV typical input offset.

🎧

Audio Preamplification and Headphone Buffers

The MCP6004-E/ST can serve as a low-noise preamplifier or buffer in portable audio paths when the desired signal bandwidth is below the 1 MHz gain-bandwidth product. Rail-to-rail input and output operation can improve utilization of low-voltage supplies, while four channels support stereo preamplification and auxiliary paths. Designers should check the 600 V/ms slew rate, output swing into the actual load, output-current capability, and channel noise at the audio frequencies of interest before finalizing the amplifier gain.

⚡

Current Sensing and Power-Control Loops

The MCP6004-E/ST is applicable to low-side current sensing, voltage-feedback control, and slow closed-loop power systems because it provides four channels, 1 MHz bandwidth, and rail-to-rail operation. It can amplify a small shunt voltage, buffer the result, compare feedback against a reference, and drive a slow correction stage. The 100 uA typical quiescent current is beneficial in battery systems, but input offset of 4.5 mV typical can dominate a small shunt measurement; calibration or a lower-offset family member may be necessary.

🧩

Embedded IoT and Edge-Sensing Systems

The MCP6004-E/ST fits edge-sensing modules that combine low-voltage analog measurements with embedded control. It can buffer resistive sensors, amplify photodiode or thermistor signals, implement gain stages, and provide active filtering before an embedded ADC. Operation from 1.8 V supports compact sensor nodes, and the quad package reduces component count. Because the 1 MHz bandwidth is modest, the part is best suited to slow environmental or industrial signals rather than wideband communications channels.

Recommended Products Summary

MCP6004-I/ST Same-family quad-amplifier option with a different temperature-grade suffix Used in: Battery-Powered Sensor Signal Conditioning, Portable Instrumentation and Measurement MCP6004T-E/STVAO Alternate MCP6004 order code in the same TSSOP family Used in: Battery-Powered Sensor Signal Conditioning MCP6024T-E/ST Related quad rail-to-rail amplifier for ADC and DAC interface evaluation Used in: Buffered ADC and DAC Interfaces, Audio Preamplification and Headphone Buffers, Current Sensing and Power-Control Loops MCP602T-E/ST Microchip Technology Used in: Buffered ADC and DAC Interfaces, Current Sensing and Power-Control Loops MCP6004T-I/ST Same-family industrial-temperature ordering option Used in: Portable Instrumentation and Measurement PCM1792ADBR Texas Instruments Used in: Audio Preamplification and Headphone Buffers MSP430F412IPMR Texas Instruments Used in: Embedded IoT and Edge-Sensing Systems STM8L152R6T6TR STMicroelectronics Used in: Embedded IoT and Edge-Sensing Systems
What is the MCP6004-E/ST and what are its main specifications?
The MCP6004-E/ST is a quad CMOS operational amplifier with a 1 MHz gain-bandwidth product, 100 uA typical quiescent current, and rail-to-rail input and output operation. According to the Microchip Technology MCP6004 product page, it operates from 1.8 V to 5.5 V and is packaged in a 14-lead TSSOP. These characteristics make it a general-purpose choice for low-voltage signal conditioning, buffering, and feedback-control circuits.
What is the supply voltage range of the MCP6004-E/ST?
The MCP6004-E/ST operates from 1.8 V to 5.5 V. The Microchip Technology MCP6004 product page identifies this range as a key feature of the quad general-purpose amplifier family. The wide low-voltage range allows use with 1.8 V, 2.5 V, 3.3 V, and 5 V rails, provided each amplifier channel remains within its input and output common-mode limits.
What does rail-to-rail input and output mean for MCP6004-E/ST?
Rail-to-rail input means the MCP6004-E/ST can accept input voltages extending near the positive and negative supply rails, while rail-to-rail output means its output can approach those limits under suitable loading. According to the Microchip Technology MCP6004 product page, this capability is useful in low-voltage systems where signals occupy much of the available supply range and headroom is limited.
Where can I download the MCP6004 datasheet PDF?
The official MCP6004 datasheet and supporting documents are available from the Microchip Technology MCP6004 product page linked on this page. The document identifies the quad 1 MHz amplifier, 100 uA typical quiescent current, 1.8 V to 5.5 V supply range, and rail-to-rail operation. Use the manufacturer document for the complete electrical tables, test conditions, ordering codes, and package drawings.
Where can I find the MCP6004-E/ST pinout?
Use the pin-description table and package drawing in the official Microchip Technology MCP6004 datasheet for the exact MCP6004-E/ST pin arrangement. The device is a 14-lead TSSOP containing four operational amplifiers, with each channel providing two inputs and one output in addition to shared supply and ground connections. Verify the ordering-code suffix against the datasheet before assigning PCB tracks.
Is MCP6004-E/ST suitable for low-voltage sensor interfaces?
Yes, the MCP6004-E/ST is suitable for low-voltage sensor interfaces because it operates from 1.8 V to 5.5 V and offers rail-to-rail input and output behavior. Its 100 uA typical quiescent current also suits compact battery-powered designs. The MCP6004 product page identifies 1 MHz bandwidth and low power as defining features for general-purpose analog signal conditioning.
MCP6004-E/ST vs MCP6004-I/ST: which version should I choose?
Choose MCP6004-E/ST for its extended commercial or industrial temperature grade and MCP6004-I/ST when the corresponding industrial temperature grade is appropriate. The MCP6004-I/ST comparison identifies the same MCP6004 family and 14-lead TSSOP architecture, while the suffix determines the temperature qualification. Confirm the exact operating-temperature limits and production requirements in the manufacturer datasheet.
What is the best drop-in replacement for MCP6004-E/ST?
MCP6004-I/ST is the closest same-package replacement identified for the MCP6004-E/ST because it belongs to the same MCP6004 quad-amplifier family and uses a 14-lead TSSOP. Check the temperature-grade requirements and ordering code before substitution. The MCP6004-E/ST or MCP6004-I/ST should be requested through the Request a Quote form on this page for current availability.
What can replace the MCP6004-E/ST?
MCP6004-I/ST is a direct same-family option because it is a quad MCP6004 amplifier in a 14-lead TSSOP package. MCP6024T-E/ST and MCP602T-E/ST are related 14-lead TSSOP alternatives that require careful comparison of bandwidth, offset, noise, and stability. Do not treat a shared package alone as proof of equivalence; confirm the electrical characteristics and pin assignment in the selected manufacturer datasheet.
Is MCP6004-E/ST the same as MCP6004-I/ST?
No, the MCP6004-E/ST and MCP6004-I/ST use suffixes to identify different temperature-grade versions of the MCP6004 family. Both are quad, 1 MHz, low-power operational amplifiers in the 14-lead TSSOP family, but the ordering code changes the qualification range. Select according to the environmental requirements of the final product rather than treating the suffixes as interchangeable without review.
When should I choose MCP6004-E/ST instead of a related MCP amplifier?
Choose MCP6004-E/ST when the design needs four general-purpose channels, operation down to 1.8 V, a 1 MHz gain-bandwidth product, and a typical quiescent current of 100 uA in one 14-TSSOP package. Select another family member if its bandwidth, input offset, noise, enable function, or temperature grade better matches the application. The complete ordering information should be checked against the manufacturer datasheet.
Is MCP6004-E/ST suitable for audio and portable applications?
The MCP6004-E/ST can support portable and audio preamplifier stages when the signal bandwidth remains within its 1 MHz gain-bandwidth product. Its 100 uA typical quiescent current reduces the contribution from four amplifier channels, while rail-to-rail operation is valuable at 1.8 V to 5.5 V. Audio designs should still verify output swing, load impedance, noise, and channel-to-channel performance.
How much power does the MCP6004-E/ST consume?
The MCP6004-E/ST has a 100 uA typical quiescent current per amplifier according to the Microchip Technology MCP6004 product page. Estimated: with four channels active and a 3.3 V supply, the quiescent supply current contribution is approximately 1.32 mA and the corresponding ideal quiescent power is approximately 4.36 mW. Actual current rises with load current and varies with process, voltage, and temperature.
Where can I buy MCP6004-E/ST and check its lead time?
Use the Request a Quote form on this page to request MCP6004-E/ST pricing, stock confirmation, and current lead time. The quote team can confirm the exact 14-lead TSSOP ordering code, authorized-channel availability, and shipment plan. Because inventory and lead time vary by lot and market conditions, request the current commercial terms rather than relying on a historical catalog listing.
What is the price of MCP6004-E/ST?
Use the Request a Quote form on this page for the current MCP6004-E/ST unit price, volume breaks, and stock allocation. Pricing can change with order quantity, market conditions, and authorized-channel inventory. The form provides a direct way to obtain current commercial terms for the exact MCP6004-E/ST ordering code rather than a generic amplifier price.
Is MCP6004-E/ST in stock and what is its lead time?
Submit the MCP6004-E/ST part number through the Request a Quote form on this page to confirm current stock and lead time. Availability can vary with lot, date code, and order quantity, so it should be confirmed for the planned build. The form also allows the buyer to request production packaging, quantity breaks, and a shipment schedule.
What compliance and environmental specifications apply to MCP6004-E/ST?
The MCP6004-E/ST is identified as RoHS compliant in the product listing, and the listed operating-temperature range is -40 C to +125 C. It is not presented as an automotive-qualified amplifier, so AEC-Q100 status is not applicable. Use the manufacturer product page and current material-declaration documentation for final RoHS, REACH, halogen-free, and conflict-minerals procurement decisions.

Engineering reference data for MCP6004-E/ST — comparison, design guidance, and compliance information.

Selection Guide

Choose MCP6004-E/ST when the design requires four general-purpose amplifier channels, operation from 1.8 V to 5.5 V, rail-to-rail input and output, and a typical quiescent current of 100 uA per channel in a 14-TSSOP package. Choose MCP6004-I/ST when its temperature-grade designation matches the product environment, and use MCP6004T-I/ST or MCP6004T-E/STVAO when the corresponding production order code is preferred. MCP6024T-E/ST and MCP602T-E/ST can be considered when their exact offset, noise, bandwidth, and stability characteristics provide a measurable advantage. Verify the pin assignment and full electrical tables before approving any substitution, particularly in precision current-sense or instrumentation circuits.

Comparison with Alternatives

Parameter This Product MCP6004-I/ST MCP6004T-I/ST MCP6004T-E/STVAO MCP6024T-E/ST MCP602T-E/ST
Package 14-lead TSSOP 14-lead TSSOP 14-lead TSSOP 14-lead TSSOP 14-lead TSSOP 14-lead TSSOP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Amplifier Channels 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels

Key Differentiators

  • Four low-power channels in one 14-TSSOP package (vs MCP602T-E/ST)
  • Direct same-family temperature-grade alternative (vs MCP6004-I/ST)
  • Rail-to-rail operation for low-voltage signal paths (vs MCP6024T-E/ST)

Design Notes

Place the supply bypass capacitor directly between the VDD and VSS pins of the 14-TSSOP package. Keep input and feedback traces short, route them away from switching-regulator nodes, and use a continuous ground plane. The four amplifier channels share supply pins, so a single inadequate bypass capacitor can increase noise across every channel rather than affecting only one signal path.

Do not assume that a 1.8 V supply permits a full 1.8 V output swing. Check the MCP6004 output-voltage-versus-load curves and account for load current and temperature. Likewise, rail-to-rail input does not eliminate common-mode rejection errors or the 4.5 mV typical input offset, which can be significant when conditioning a millivolt-level sensor signal.

Check closed-loop stability with the actual source impedance, output capacitance, and load. A feedback resistor in the kilohm range combined with stray capacitance can create peaking even though the 1 MHz gain-bandwidth product is sufficient for the intended signal. Increase noise gain if necessary, add an isolation resistor, or select a higher-bandwidth amplifier when driving long cables or capacitive loads.

Estimated: each amplifier contributes 100 uA typical quiescent current, so four active channels require approximately 400 uA before load current. At a 3.3 V supply, the corresponding quiescent supply-current draw is approximately 1.32 mA and the ideal quiescent power is approximately 4.36 mW. Actual consumption also includes output-current demand and supply-dependent bias current.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

RoHS compliance is identified in the MCP6004-E/ST product listing. No manufacturer declaration confirming REACH, lead-free, halogen-free, or conflict-minerals status was identified.

Related Searches

mcp6004 datasheet mcp6004 op amp mcp6004 pins mcp6004 equivalent mcp6004 datasheet pdf mcp6004 alternative mcp6004 ic pinout MCP6004-E/ST datasheet pdf MCP6004-E/ST pinout MCP6004-E/ST replacement MCP6004-E/ST vs MCP6004-I/ST MCP6004-E/ST price MCP6004-E/ST TSSOP-14 MCP6004-E/ST sensor interface Microchip MCP6004-E/ST

Related Components & Terms

Microchip Technology MCP6004-E/ST MCP6004-I/ST MCP6004T-I/ST MCP6004T-E/STVAO MCP6024T-E/ST MCP602T-E/ST operational amplifier quad amplifier analog amplifier linear semiconductor CMOS operational amplifier rail-to-rail input rail-to-rail output gain-bandwidth product quiescent current input offset voltage voltage noise density slew rate TSSOP-14 TSSOP package family surface-mount package low-voltage sensor interface ADC input buffering portable instrumentation RoHS
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details