XC6SLX100-L1FG676I - 101261-Cell Spartan-6 LX FPGA | AMD
MPN: XC6SLX100-L1FG676I ✓ ActiveXC6SLX100-L1FG676I Overview
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O can be configured after fabrication. Within the product hierarchy, an FPGA belongs to the programmable-logic and CPLD family, combines thousands of configurable logic blocks with programmable routing, and sits above fixed-function logic devices. Spartan-6 devices balance integration, power consumption, and cost for industrial, communications, consumer, and embedded applications.
Key device features include 101,261 logic cells, 7,911 configurable logic blocks, 480 user I/O, and operation from a 0.95 V to 1.05 V core-voltage range. The 45 nm CMOS process supports high integration while maintaining a 1.2 V I/O supply as identified by the device family. A 676-ball FBGA provides the board-level interconnect density required for high-pin-count programmable logic designs.
The Spartan-6 LX architecture integrates configurable logic blocks, block RAM, digital signal processing slices, programmable interconnect, clock-management resources, and general-purpose I/O. The XC6SLX100 device provides 493,9776? No unit appears in the product listing for this identifier; use the listed 101,261-cell and 7,911-CLB architecture values for capacity planning. The maximum listed clock frequency is 500 MHz, while the maximum combinatorial delay is listed as 0.460 ns.
Typical applications include industrial control, industrial networking, embedded video processing, communications infrastructure, instrumentation, and high-density digital signal processing. The large logic-cell count supports parallel datapaths and control logic, while 480 I/O allows the FPGA to interface directly with external memory, transceivers, converters, and industrial interfaces. System partitioning and I/O standards should be checked against the selected board-level design.
For a new PCB, use the manufacturer package outline and pinout because a 676-ball FBGA requires precise escape routing, clean power distribution, and careful ball-assignment review. Place decoupling capacitors close to supply balls, preserve the recommended power and ground-plane topology, and validate high-speed I/O signal integrity with the selected memory and transceiver devices.
This page combines the verified device identity, package and architecture details, family alternatives, comparison parameters, and practical PCB guidance to support faster component selection, sourcing, and hardware implementation. It is designed to help engineers distinguish exact ordering-code differences before committing a Spartan-6 LX FPGA to a new design.
Drop-in alternatives for XC6SLX100-L1FG676I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with XC6SLX100-L1FG676I (same form factor and footprint) — differing in Logic Cells, Ball Pitch, Core Supply Voltage, Device Type, Mounting Type.
XC6SLX100-3FG676I
✅ Drop-InContact for price
View Datasheet →XC6SLX100-3FGG676I
✅ Drop-In📋 Reference alternative (not in catalog)
XC6SLX100-2FGG676I
✅ Drop-In📋 Reference alternative (not in catalog)
XC6SLX100-3FGG676C
✅ Drop-In📋 Reference alternative (not in catalog)
XC6SLX100-2FGG676C
✅ Drop-InContact for price
View Datasheet →XC6SLX100-L1FG676I Maximum Ratings & Electrical Characteristics
| Device Type | Spartan-6 LX FPGA |
| Logic Cells | 101,261 cells |
| Configurable Logic Blocks | 7,911 CLBs |
| User I/O | 480 I/O |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage | 0.95 V to 1.05 V |
| Nominal Core Voltage | 1 V |
| Maximum Clock Frequency | 500 MHz |
| Maximum Combinatorial Delay | 0.460 ns |
| Package | 676-ball FBGA, S-PBGA-B676 |
| Pin Count | 676 pins |
| Product Type | Field-programmable gate array |
| Logic Architecture | Spartan-6 LX |
XC6SLX100-L1FG676I 676-ball fbga, s-pbga-b676 Pin Configuration Guide
Pin configuration for XC6SLX100-L1FG676I (676-ball fbga, s-pbga-b676 package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XC6SLX100-L1FG676I.
Refer to the datasheet for full pin configuration.
Typical Applications
XC6SLX100-L1FG676I is suitable for 6 applications: Industrial Ethernet Control, Embedded Video Processing, Communications Infrastructure, Test and Measurement Equipment, High-Performance Instrumentation, Secure Embedded Systems.
Industrial Ethernet Control
The XC6SLX100-L1FG676I fits industrial Ethernet control equipment that combines packet processing, protocol conversion, supervisory logic, and local real-time control. Its 101,261 logic cells and 7,911 configurable logic blocks provide substantial parallel capacity, while 480 user I/O allow connection to PHYs, transceivers, status displays, memory, and industrial peripherals. The 500 MHz maximum device clock supports high-rate internal datapaths, although the final timing target depends on routing and utilization. A 45 nm CMOS implementation also suits compact control platforms requiring programmable logic without a separate high-performance processor. Board planning should include decoupled core and I/O supplies, controlled clock distribution, terminated differential interfaces, and a multilayer power-and-ground structure for reliable Ethernet performance.
Recommended
Embedded Video Processing
The AMD XC6SLX100-L1FG676I is suitable for embedded video preprocessing when a system needs programmable pixel pipelines, color conversion, scaling, deinterlacing, or synchronization in parallel with a host processor. The device's 101,261 logic cells and 480 I/O offer enough parallel fabric for multiple video interfaces and control channels, while its maximum clock rating of 500 MHz supports demanding pipeline stages. The exact throughput remains a function of pixel format, resolution, memory bandwidth, and timing closure. In a practical design, external frame-buffer memory connects through the FPGA's programmable I/O, and internal registers coordinate line and frame timing. Use the manufacturer pinout to assign voltage standards, and validate video timing, memory timing, and signal integrity with simulation before hardware release.
Recommended
Communications Infrastructure
The XC6SLX100-L1FG676I can be used in communications infrastructure for parallel data paths, channelization, interface adaptation, clocking, and system supervision. Its 101,261-cell Spartan-6 LX architecture provides substantial configurable logic capacity, and the 480 available I/O allow multiple external data buses to be connected without moving the design into a very large package. The listed 500 MHz maximum clock supports high-speed internal processing, while the 45 nm CMOS process targets cost-sensitive embedded networking. A practical implementation may use separate logic regions for datapath, framing, and control, with dedicated clock-management resources for deterministic timing. Power planning should account for activity-dependent dynamic consumption, and the 676-ball FBGA requires careful layer transitions, via planning, and decoupling to preserve signal and power integrity across high-speed interfaces.
Recommended
Test and Measurement Equipment
The AMD XC6SLX100-L1FG676I is appropriate for programmable test and measurement systems that coordinate acquisition logic, pattern generation, timing control, data reduction, and instrument communication. The 101,261 logic cells and 480 I/O allow multiple measurement channels, control interfaces, and status paths to be consolidated in one device. The maximum clock rating of 500 MHz provides a useful architecture target for high-rate digital signal paths, although channel timing and system jitter must be evaluated against the selected specifications. In an instrument design, the FPGA can trigger multiple converters, timestamp events, apply calibration tables, and transfer results to a host processor over a high-speed serial or parallel interface. Designers should reserve enough pins for configuration, clocking, debug access, and auxiliary controls, and should follow the manufacturer power, decoupling, and package-routing guidance.
Recommended
High-Performance Instrumentation
The XC6SLX100-L1FG676I fits instrumentation platforms requiring deterministic parallel logic, configurable acquisition paths, and flexible interface support. Its 7,911 configurable logic blocks and 480 user I/O allow instrument-specific sequencing, digital filtering, calibration, and front-panel control to share one programmable fabric. The device's 500 MHz maximum clock and 0.460 ns maximum combinatorial delay are important timing references when partitioning functions, but actual performance depends on placement, routing, and utilization. For analog-to-digital and digital-to-analog conversion systems, use the FPGA to control converters and capture results while separating sensitive analog grounding from high-speed digital return paths. The 676-ball FBGA provides ample connectivity but also demands stringent ball-to-trace rules, uninterrupted reference planes, and thermal-aware placement to maintain reliable operation.
Recommended
Secure Embedded Systems
The AMD XC6SLX100-L1FG676I can anchor a secure embedded system by combining boot control, hardware root-of-trust functions, communication termination, encryption-related datapaths, and supervisory logic. Its 101,261 logic cells permit dedicated hardware parallelism, while 480 I/O support external memory, security sensors, management interfaces, and status indicators. The 45 nm CMOS Spartan-6 LX architecture remains appropriate for programmable embedded platforms when availability, lifecycle planning, and toolchain support are acceptable. Implement security-critical functions as isolated logic regions and verify the bitstream-loading path, configuration permissions, external memories, and fault handling. Because the device is programmable, security also depends on authenticated bitstream handling, lock mechanisms, and secure boot integration rather than physical packaging alone. Commercial and temperature-grade suffix choices should be reviewed against deployment conditions before release.
Recommended
Recommended Products Summary
Engineering reference data for XC6SLX100-L1FG676I — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XC6SLX100-3FG676I | XC6SLX100-3FGG676I | XC6SLX100-2FGG676I | XC6SLX100-3FGG676C | XC6SLX100-2FGG676C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA |
| Ordering Option | L1FG676I | 3FG676I | 3FGG676I | 2FGG676I | 3FGG676C | 2FGG676C |
Key Differentiators
- High-density programmable logic in a single device (vs XC6SLX100-3FG676I)
- L1 ordering option for applications specifying that device class (vs XC6SLX100-2FGG676I)
- Industrial temperature suffix retained (vs XC6SLX100-2FGG676C)
- High I/O connectivity for multi-interface embedded designs (vs XC6SLX100-3FGG676I)
Design Notes
Treat the 676-ball FBGA as a multilayer, reference-plane-sensitive footprint. Follow the manufacturer package drawing for ball pitch, ball locations, antipads, and via-in-pad rules. Keep high-speed routes away via field construction, provide short return paths beneath each interface, and preserve the recommended split between core, I/O, and auxiliary supply planes. Complete signal-integrity simulations for memory and serial links because a correct pin assignment alone does not guarantee a manufacturable high-speed layout.
Implement the 0.95 V to 1.05 V core supply and the Spartan-6 LX I/O supply according to the manufacturer power-connection table. Place the required bulk and high-frequency decoupling capacitance close to the associated supply balls, with separate return connections to a stable ground reference. Do not assume that an adjacent capacitor is electrically sufficient; account for via inductance, plane impedance, simultaneous switching demand, and the dynamic current profile of the selected design.
Estimate junction temperature from total FPGA dissipation, package thermal characteristics, board construction, airflow, and the temperature grade of the selected suffix. The 45 nm device can consume additional power as logic utilization and switching activity increase, so a lightly loaded benchmark is not sufficient for final thermal analysis. Spread high-utilization logic across the die where practical, provide a continuous thermal path through the package balls and board layers, and verify the worst ambient condition with temperature sensors near the device.
Do not substitute an ordering suffix solely because the package has 676 balls. Confirm the speed option, temperature grade, package drawing, configuration interface, power connections, and supported I/O standards for the complete MPN. A successful hardware replacement also requires reviewing the bitstream and configuration behavior, pin constraints, and timing constraints. This is particularly important when changing L1, FG, FGG, I, or C suffix combinations on an existing board.
Compliance Information
Compliance attributes were not confirmed for the exact XC6SLX100-L1FG676I ordering code. A RoHS-compliant status shown for the related XC6SLX100-L1FGG676I was not transferred to the target.