Microchip Technology

MCP3422A7-E/MS - 18-Bit 2-Channel 240 SPS ADC | Microchip Technology

N.º da peça: MCP3422A7-E/MS ✓ Ativo
2.048 V Vdss 8-MSOP Package
MOQ: 1 |

MCP3422A7-E/MS Visão geral

The Microchip Technology MCP3422A7-E/MS is an 18-bit, low-noise, high-accuracy delta-sigma analog-to-digital converter with two differential input channels, an integrated 2.048 V reference, and an I2C serial interface. It converts analog inputs at up to 240 samples per second and is packaged in an 8-MSOP. The device is designed for precision measurement systems that require accurate differential conversion, flexible analog gain, and a compact two-wire digital interface.

An ADC is a data-conversion IC that transforms continuous analog voltage into a digital numerical code for processing, measurement, or control. The MCP3422 belongs to the delta-sigma ADC family, where an internal modulator and digital filter shape the conversion process. In the broader semiconductor hierarchy, the MCP3422 is an ADC, then an analog and mixed-signal IC, and finally a semiconductor used in embedded measurement and instrumentation systems.

The MCP3422A7-E/MS provides up to 18-bit resolution, two differential inputs, an onboard precision 2.048 V reference, and a differential input range of plus or minus 2.048 V. Its 240 SPS conversion rate is suitable for slow-changing process, sensor, and instrumentation signals rather than high-speed waveform acquisition. The two-channel architecture allows simultaneous monitoring of two related measurements or differential sensing of a bridge or transducer.

The converter uses an I2C-compatible two-wire interface to transfer conversion results and configure operating conditions. Its differential input structure helps reject common-mode noise when the sensor is connected through balanced wiring. The integrated reference reduces the number of external components needed for ratiometric or absolute measurements, although the application must account for reference accuracy, noise, and power-supply behavior.

Typical uses include industrial process monitoring, low-frequency sensor acquisition, pressure and temperature measurement, environmental instrumentation, and embedded data acquisition systems. For bridge-based sensors, the differential inputs can reject much of the excitation-signal noise present on both sensor lines. For slowly varying voltages, the 240 SPS rate provides sufficient conversion bandwidth while averaging noise through the converter's digital filtering.

PCB implementation should prioritize short, symmetric analog traces, a quiet ground return, and separation between the analog inputs and switching nodes. The datasheet pin-description table should be used when assigning connector and test points. Verify the selected gain, conversion timing, reference configuration, and digital pull-ups before committing the layout.

This product page combines the manufacturer's device description with package, application, comparison, and design guidance for engineers evaluating the MCP3422A7-E/MS in precision, low-speed measurement systems.

Alternativas drop-in para MCP3422A7-E/MS — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MCP3422A7-E/MS (mesmo formato e footprint) — diferindo em Differential Input Range, Resolution, Input Channels, Sampling Rate, Package.

Microchip Technology
Differential Input Range: ±2.048 V
Sampling Rate: 3.75 samples/s
Package: 8-pin MSOP, 3 mm x 3 mm x 0.85 mm
Microchip Technology
Differential Input Range: Plus or minus 2.048 V
Resolution: 18 bits
Input Channels: 2 channels
Microchip Technology
Differential Input Range: +/-2.048 V
Resolution: 18 bit
Input Channels: 2 differential inputs

MCP3422A0-E/MS

✅ Drop-In
Microchip Technology
📦 8-MSOP
Delta-sigma (ΔΣ) · Up to 18 bits · 2 channels · 2 differential inputs · 3.75 samples/s · 2.7 V to 5.5 V · 145 µA · 2.048 V

Consulte o preço

Ver ficha técnica →

MCP3422A1-E/MS

✅ Drop-In
Microchip Technology
📦 8-MSOP
18 bits · 2 channels · Differential · Delta-sigma (Delta-Sigma) · 4 samples per second · 2.048 V · Plus or minus 2.048 V · 2.7 V to 5.5 V

Consulte o preço

Ver ficha técnica →

MCP3422A1T-E/MS

✅ Drop-In
📦 8-MSOP
Same 8-MSOP MCP3422-family format with 18-bit differential conversion; the A1T-specific conversion and timing option differs from the 240 SPS A7 configuration

📋 Alternativa de referência (fora do catálogo)

MCP3422A3-E/MS

✅ Drop-In
Microchip Technology
📦 8-MSOP
18 bit · 2 · Differential · Sigma-delta · 3.75 samples/s · 2.048 V · ±2.048 V · 2.7 V to 5.5 V

Consulte o preço

Ver ficha técnica →

MCP3422A2-E/MS

✅ Drop-In ⚠️ Especificações não verificadas
Microchip Technology
📦 8-MSOP
18-bit delta-sigma ADC · 18 bit · 2 differential inputs · 3.75 kSPS · 2.7 V to 5.5 V · 2.048 V · +/-2.048 V · Integrated, programmable

Consulte o preço

Ver ficha técnica →

MCP3422A7-E/MS Classificações máximas e características elétricas

Resolução Up to 18 bits
Input Channels 2 differential input channels
ADC Architecture Delta-sigma
Conversion Rate 240 SPS
Internal Reference Voltage 2.048 V
Differential Input Range +/-2.048 V differentially
Supply Voltage Range 2.7 V to 5.5 V
Digital Interface I2C, 2-wire
Faixa de temperatura de operação -40 C to +125 C
Encapsulamento 8-MSOP
Device Type Analog-to-digital converter
Input Configuration Differential inputs
On-Board Reference Yes, precision 2.048 V reference
Output Resolution 18-bit
Number of Inputs 2
Taxa de amostragem 240 samples per second

Guia de Configuração de Pinos do MCP3422A7-E/MS 8-msop

Configuração de pinos para MCP3422A7-E/MS (pacote 8-msop). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 8-msop para MCP3422A7-E/MS

Nenhum dado detalhado de pinagem disponível para MCP3422A7-E/MS.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MCP3422A7-E/MS é adequado para 6 aplicaçãos: Industrial Process Monitoring, Temperature and Environmental Sensing, Bridge and Strain Measurement, Battery-Powered Environmental Instrumentation, Precision Data Acquisition, Power and Battery Monitoring.

🏭

Industrial Process Monitoring

The MCP3422A7-E/MS fits industrial process monitoring where sensors produce slowly changing voltages. Its 18-bit resolution and two differential channels allow a controller to measure two related process signals while rejecting common-mode disturbance. The 240 SPS conversion rate is appropriate for temperature, pressure, level, and flow transmitters that do not require waveform capture. The I2C interface reduces the number of host-controller connections, while the integrated 2.048 V reference simplifies scaling. Designers should isolate analog routing from motors, relays, and switching supplies, and should verify the selected gain and input range against the transmitter output.

🧩

Temperature and Environmental Sensing

The MCP3422A7-E/MS can acquire low-frequency temperature, humidity, and environmental sensor outputs in a compact embedded instrument. The two differential inputs are useful when one channel monitors a reference sensor and the other measures the target condition. Its up-to-18-bit resolution provides a high-resolution digital code, while the 240 SPS rate is more than sufficient for slow thermal changes. The integrated 2.048 V reference helps maintain consistent conversion scaling across both channels. Keep the sensor return path close to the analog ground reference and place filtering close to the device to prevent environmental noise from being sampled between conversions.

🏗️

Bridge and Strain Measurement

The MCP3422A7-E/MS is suitable for bridge-based strain and pressure measurement because it provides two differential input channels and up to 18-bit resolution. A bridge output is small and commonly centered near a midpoint, so the ADC's differential architecture helps reject noise shared by both input lines. The 240 SPS rate supports static load, vibration-envelope, and slowly changing mechanical measurements. The integrated reference and I2C interface allow a compact instrumentation module to provide digital results without a separate reference controller. For best results, use symmetrical routing, a clean analog return, and appropriate input filtering while checking the sensor excitation requirements.

🔋

Battery-Powered Environmental Instrumentation

The MCP3422A7-E/MS can serve as the measurement front end in a battery-powered environmental node because its 2.7 V to 5.5 V supply range accommodates common embedded rails. The I2C interface allows the ADC to share a bus with a microcontroller or low-power sensor hub, reducing wiring and software complexity. Its 240 SPS rate suits periodic rather than continuous high-rate sampling, and the differential inputs help preserve measurement integrity in field wiring. The 8-MSOP package also supports compact PCB layouts. Power-management design should account for the ADC's operating current, input settling time, and the energy required for periodic sensor excitation.

🖥️

Precision Data Acquisition

The MCP3422A7-E/MS is useful in precision data-acquisition systems that monitor two low-level, low-frequency signals. Its delta-sigma architecture, 18-bit resolution, differential inputs, and integrated 2.048 V reference are well aligned with laboratory and industrial measurements requiring stable digital output. The I2C interface provides a compact connection to a controller, while the 240 SPS limit makes the converter more suitable for temperature, position, and slow process variables than for oscilloscope-like waveforms. A careful analog layout, short input traces, and stable supply decoupling are essential to preserve the resolution promised by the converter.

⚡

Power and Battery Monitoring

The MCP3422A7-E/MS can measure differential battery-cell or power-rail voltages in a monitoring circuit. Its two channels support two monitored potentials or a differential measurement referenced to a common point. The 18-bit resolution can provide useful resolution for slowly changing supply conditions, and the internal 2.048 V reference simplifies calibration when the measured signal is scaled appropriately. The 240 SPS rate is sufficient for supervisory power measurements. However, high-voltage battery systems require external protection, attenuation, and isolation; the ADC itself is intended only for the specified 2.7 V to 5.5 V supply and input ranges.

What is the operating voltage of MCP3422A7-E/MS?
The MCP3422A7-E/MS operates from 2.7 V to 5.5 V according to the Microchip MCP3422 product information. This range supports both 3.3 V and 5 V systems. The I2C interface and internal reference share the device supply, so the analog and digital rails should be decoupled close to the package.
What is the resolution of MCP3422A7-E/MS?
The MCP3422A7-E/MS provides up to 18-bit resolution according to the Microchip MCP3422 product page. The delta-sigma ADC is designed for accurate conversion of low-frequency analog signals. Its two differential inputs can measure bipolar voltages within the device's specified differential input range.
What is the conversion rate of MCP3422A7-E/MS?
The MCP3422A7-E/MS supports a maximum conversion rate of 240 samples per second, as stated in the Microchip MCP3422 product description and the related device documentation. This rate is appropriate for slowly changing sensor and process signals, but it is not intended for high-speed waveform sampling.
Does MCP3422A7-E/MS have differential inputs?
Yes. The MCP3422A7-E/MS has two differential input channels according to the Microchip MCP3422 product page. Differential operation helps reject common-mode noise and is especially useful with bridge transducers, current-sense systems, and other balanced sensor arrangements.
What reference voltage does MCP3422A7-E/MS use?
The MCP3422A7-E/MS includes an onboard precision 2.048 V reference according to the Microchip device description. This reference supports a specified differential input range of plus or minus 2.048 V and reduces the need for a separate reference circuit.
Where can I download the MCP3422A7-E/MS datasheet PDF?
The official MCP3422 documentation is available through the Microchip product page at https://www.microchip.com/en-us/product/MCP3422. The device family documentation includes the MCP3422, MCP3423, and MCP3424 information, including electrical characteristics, pin descriptions, and application guidance.
Where can I find the MCP3422A7-E/MS pinout?
The MCP3422A7-E/MS pinout is identified as an 8-MSOP package in the device documentation. Use the manufacturer pin-description table to map the differential inputs, supply pins, I2C pins, reference pins, and exposed or no-connect positions before laying out the PCB.
What is the difference between MCP3422A7-E/MS and MCP3422A1-E/MS?
Both devices are members of the Microchip MCP3422 family and use the same 8-MSOP mechanical format, but their conversion-rate options differ. The MCP3422A7-E/MS is associated with the 240 SPS operating point, while the MCP3422A1-E/MS provides a different rate option. Confirm the required sampling speed and register behavior against the family datasheet.
Is MCP3422A7-E/MS suitable for sensor measurement?
Yes, the MCP3422A7-E/MS is well suited to low-frequency sensor measurement because it offers 18-bit resolution, differential inputs, and a 240 SPS maximum conversion rate. It is appropriate for temperature, pressure, strain, and process signals that change slowly relative to the converter's sampling capability.
Can MCP3422A7-E/MS replace MCP3422A7-E/MC?
No. MCP3422A7-E/MC is listed in an 8-DFN package, while MCP3422A7-E/MS is an 8-MSOP package. Although both are associated with the MCP3422 family and similar conversion functions, their footprints are not interchangeable, so the MCP3422A7-E/MC requires a different PCB layout.
What can replace MCP3422A7-E/MS on the same PCB?
The closest same-footprint choices are Microchip MCP3422A0-E/MS, MCP3422A1-E/MS, MCP3422A1T-E/MS, and MCP3422A3-E/MS. They share the MCP3422 family's 8-MSOP format and differential ADC functions, but conversion-rate options and related electrical details must be checked before substitution.
Is MCP3422A7-E/MS better than MCP3301T-BI/MS for precision measurement?
The MCP3422A7-E/MS is a delta-sigma ADC optimized for high-resolution, low-speed measurements with differential inputs and an integrated 2.048 V reference. MCP3301T-BI/MS is also a precision ADC option, but the appropriate choice depends on the required input range, interface, sampling rate, and channel configuration rather than resolution alone.
Where to buy MCP3422A7-E/MS online?
Use the Request a Quote form on this page to request current availability, pricing, and lead time for MCP3422A7-E/MS. The exact MPN is also listed in the manufacturer and distributor references, including Microchip's product page and the 8-MSOP component listing.
What is the price of MCP3422A7-E/MS?
Current pricing for MCP3422A7-E/MS should be obtained through the Request a Quote form on this page. The product's pricing can change with market conditions, quantity, and supply status, so a quote request is the appropriate way to obtain a current commercial response.
What is the lead time for MCP3422A7-E/MS?
The current lead time for MCP3422A7-E/MS should be confirmed through the Request a Quote form on this page. The manufacturer product page identifies the MCP3422 device family, while distributor listings provide additional availability information; request a quotation for the exact 8-MSOP suffix and required quantity.
What are the key specifications of MCP3422A7-E/MS that engineers should know?
The MCP3422A7-E/MS combines up to 18-bit resolution, two differential channels, a 240 SPS conversion rate, an integrated 2.048 V reference, a 2.7 V to 5.5 V supply range, and an I2C interface in an 8-MSOP package. According to the Microchip MCP3422 product page, these characteristics make it appropriate for accurate, low-speed sensor and process measurement.

Dados de referência de engenharia para MCP3422A7-E/MS — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose MCP3422A7-E/MS when the design needs an 18-bit, two-channel differential ADC with a 240 SPS conversion rate, an integrated 2.048 V reference, and an I2C interface in an 8-MSOP package. It is a strong fit for temperature, pressure, process, and environmental sensors whose signals change slowly and require more resolution than a conventional low-speed ADC. MCP3422A0-E/MS and MCP3422A1-E/MS are practical same-footprint alternatives when their documented conversion timing better matches the system. MCP3422A1T-E/MS and MCP3422A3-E/MS can also preserve the 8-MSOP layout, but the gain, timing, and acquisition requirements should be checked against the family documentation. MCP3422A7-E/MC is not a drop-in replacement because it uses an 8-DFN package. For high-speed waveforms, select a converter with a substantially faster conversion rate instead of treating this device as a general-purpose high-speed ADC.

Comparação com alternativas

Parâmetro Este produto MCP3422A0-E/MS MCP3422A1-E/MS MCP3422A1T-E/MS MCP3422A3-E/MS
Package 8-MSOP 8-MSOP 8-MSOP 8-MSOP 8-MSOP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Special Features Integrated 2.048 V reference and differential inputs MCP3422-family differential ADC MCP3422-family differential ADC MCP3422-family differential ADC MCP3422-family differential ADC

Principais diferenciais

  • 240 SPS conversion-rate option in an 18-bit two-channel ADC (vs MCP3422A1-E/MS)
  • Differential two-channel measurement with integrated reference (vs MCP3422A0-E/MS)
  • Same-footprint family alternative for PCB reuse (vs MCP3422A3-E/MS)
  • I2C integration simplifies digital connections (vs MCP3422A1T-E/MS)

Notas de projeto

Route the two differential inputs as closely matched pairs and keep them away from switching nodes, relay contacts, and high-current return paths. Place input filtering and the ADC's supply bypass capacitors close to the relevant pins. A clean analog ground reference and short traces are especially important when using the converter's high-resolution modes.

The MCP3422A7-E/MS is intended for low-frequency, low-noise measurement rather than high-speed waveform capture. Keep sensor wiring short or use differential routing, establish a defined analog and digital grounding strategy, and validate the analog input bandwidth against the selected gain and conversion timing before adding external filters that could alter the measurement settling behavior.

The device operates from 2.7 V to 5.5 V, so the selected system rail must remain within that range including tolerance and transient excursions. Use local supply decoupling and verify that noise on the supply does not dominate the converter's noise performance. For battery-powered designs, account for the ADC's operating current and periodic-conversion duty cycle when estimating energy use.

Do not treat the 240 SPS maximum conversion rate as a general-purpose high-speed sampling capability. Confirm the selected gain, differential input range, conversion time, and I2C timing in the family datasheet. Also avoid assuming that the onboard 2.048 V reference makes external calibration unnecessary; offset, gain, reference accuracy, and PCB leakage can still affect the final measurement accuracy.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The device information identifies the MCP3422 family and its 8-MSOP packaging, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not provided for this MPN.

Buscas relacionadas

MCP3422A7-E/MS datasheet MCP3422A7-E/MS pinout MCP3422A7-E/MS datasheet pdf MCP3422A7-E/MS specifications MCP3422A7-E/MS 18-bit ADC MCP3422A7-E/MS 240 SPS MCP3422A7-E/MS 8-MSOP MCP3422A7-E/MS I2C ADC MCP3422A7-E/MS equivalent MCP3422A7-E/MS replacement MCP3422A7-E/MS cross reference MCP3422A7-E/MS price MCP3422A7-E/MS stock Microchip MCP3422A7-E/MS MCP3422A7-E/MS application circuit

Componentes & termos relacionados

Microchip Technology MCP3422A7-E/MS MCP3422 MCP3422A0-E/MS MCP3422A1-E/MS MCP3422A1T-E/MS MCP3422A3-E/MS ADC analog-to-digital converter delta-sigma ADC 18-bit resolution differential input I2C interface 2.048 V reference 240 SPS precision measurement sensor acquisition process monitoring MSOP-8 Microchip Technology analog and mixed-signal IC common-mode rejection embedded measurement system industrial instrumentation power management
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ