STM32H753ZIT6 - 480MHz Cortex-M7 MCU, 2MB Flash | STMicroelectronics
MPN: STM32H753ZIT6 ✓ Hoạt độngSTM32H753ZIT6 Tóm tắt
A microcontroller (MCU) is a compact integrated circuit that combines a processor core, non-volatile program memory, volatile data memory, and programmable peripherals on a single die, allowing it to govern a dedicated embedded function without external support chips. The STM32H753ZIT6 sits at the top of the STM32H7 hierarchy: Cortex-M7 core -> STM32H7 series -> STM32 32-bit MCU family -> embedded microcontroller -> semiconductor. This position makes it the natural upgrade path from Cortex-M4/M3 designs that have run out of compute headroom.
Key differentiators include the 480 MHz Cortex-M7 core with DSP and double-precision FPU instructions, 2 MB dual-bank Flash supporting read-while-write for live firmware updates, 1 MB SRAM, and a rich connectivity set: Ethernet MAC, USB OTG HS/FS, CAN FD, and multiple USART/SPI/I2C instances. A 16-bit ADC at 3.6 MSPS, a 12-bit DAC, and advanced motor-control timers round out the analog and control capability.
Technically, the device is fabricated on a 40 nm process and operates from a 1.62 V to 3.6 V supply over -40 C to +85 C. An on-chip power management unit provides Sleep, Stop, and Standby modes for battery-powered designs, while the integrated LDO/SMPS regulator architecture differs from earlier STM32F7 designs that used a BYPASS_REG pin.
Typical applications include industrial automation (PLCs, robotics), motor control (drives, pumps), medical devices (patient monitors, infusion pumps), and high-end audio equipment. The high clock speed and DSP instructions suit real-time signal processing, while the Chrom-ART Accelerator supports advanced graphical user interfaces.
When designing with this MCU, decouple every VDD pin with a 100 nF capacitor placed close to the pin plus a 4.7 uF bulk capacitor, and feed VDDA through a ferrite bead from a dedicated analog supply. For Ethernet and USB HS, follow the STM32H7 reference manual (RM0433) layout guidance to preserve signal integrity.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, second-sourcing, and layout decisions.
Bộ thay thế dễ dàng lắp đặt cho STM32H753ZIT6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32H753ZIT6 (cùng hình factor và footprint) — khác nhau ở Operating Temperature, Package, ADC, Communication Interfaces, SRAM.
STM32H743ZIT6
Liên hệ để biết giá
Xem tài liệu →STM32H753IIT6
Liên hệ để biết giá
Xem tài liệu →STM32H753BGT6
Liên hệ để biết giá
Xem tài liệu →STM32H745IIT6
Liên hệ để biết giá
Xem tài liệu →STM32H750ZBT6
Liên hệ để biết giá
Xem tài liệu →STM32H753ZIT6 Tỷ lệ tối đa & tính chất điện
| Core Architecture | Arm Cortex-M7 32-bit RISC |
| Maximum CPU Frequency | 480 MHz |
| Floating Point Unit | Double-precision (IEEE 754 compliant) |
| Program Memory (Flash) | 2 MB dual-bank |
| RAM | 1 MB SRAM |
| Supply Voltage Range | 1.62 V to 3.6 V |
| Nhiệt độ hoạt động | -40 C to +85 C |
| Hộp | LQFP-144 (20x20 mm, 0.5 mm pitch) |
| Số lượng chân | 144 |
| Process Technology | 40 nm |
| ADC | 16-bit, 3.6 MSPS |
| DAC | 12-bit |
| Ethernet | 10/100 MAC with DMA |
| USB | OTG HS/FS |
| CAN | CAN FD |
| Graphics Accelerator | Chrom-ART Accelerator (2D) |
| Cryptographic Accelerator | Hardware crypto processor |
| Low-Power Modes | Sleep, Stop, Standby |
| Kiểu lắp đặt | Surface Mount |
| Trạng thái RoHS | Compliant |
Cấu hình chân STM32H753ZIT6
| Chân 1 | PE2 — GPIO port E bit 2 |
| Chân 2 | PE3 — GPIO port E bit 3 |
| Chân 3 | PE4 — GPIO port E bit 4 |
| Chân 4 | PE5 — GPIO port E bit 5 |
| Chân 5 | PE6 — GPIO port E bit 6 |
| Chân 6 | VBAT — Backup domain supply |
| Chân 7 | PC13 — GPIO port C bit 13 |
| Chân 8 | PC14-OSC32_IN — GPIO / 32.768 kHz crystal input |
| Chân 9 | PC15-OSC32_OUT — GPIO / 32.768 kHz crystal output |
| Chân 10 | PF0 — GPIO port F bit 0 |
| Chân 11 | PF1 — GPIO port F bit 1 |
| Chân 12 | PF2 — GPIO port F bit 2 |
| Chân 13 | PF3 — GPIO port F bit 3 |
| Chân 14 | PF4 — GPIO port F bit 4 |
| Chân 15 | PF5 — GPIO port F bit 5 |
| Chân 16 | VSS — Ground |
| Chân 17 | VDD — Digital power supply |
| Chân 18 | PF6 — GPIO port F bit 6 |
| Chân 19 | PF7 — GPIO port F bit 7 |
| Chân 20 | PF8 — GPIO port F bit 8 |
| Chân 21 | PF9 — GPIO port F bit 9 |
| Chân 22 | PF10 — GPIO port F bit 10 |
| Chân 23 | PH0-OSC_IN — GPIO / HSE crystal input |
| Chân 24 | PH1-OSC_OUT — GPIO / HSE crystal output |
| Chân 25 | NRST — Reset input (active low) |
| Chân 26 | PC0 — GPIO port C bit 0 |
| Chân 27 | PC1 — GPIO port C bit 1 |
| Chân 28 | PC2_C — GPIO / analog input |
| Chân 29 | PC3_C — GPIO / analog input |
| Chân 30 | VDD — Digital power supply |
| Chân 31 | VSSA — Analog ground |
| Chân 32 | VREF+ — ADC/DAC reference voltage |
| Chân 33 | VDDA — Analog power supply |
| Chân 34 | PA0 — GPIO port A bit 0 |
| Chân 35 | PA1 — GPIO port A bit 1 |
| Chân 36 | PA2 — GPIO port A bit 2 |
| Chân 37 | PA3 — GPIO port A bit 3 |
| Chân 38 | VSS — Ground |
| Chân 39 | VDD — Digital power supply |
| Chân 40 | PA4 — GPIO port A bit 4 |
| Chân 41 | PA5 — GPIO port A bit 5 |
| Chân 42 | PA6 — GPIO port A bit 6 |
| Chân 43 | PA7 — GPIO port A bit 7 |
| Chân 44 | PC4 — GPIO port C bit 4 |
| Chân 45 | PC5 — GPIO port C bit 5 |
| Chân 46 | PB0 — GPIO port B bit 0 |
| Chân 47 | PB1 — GPIO port B bit 1 |
| Chân 48 | PB2 — GPIO port B bit 2 |
| Chân 49 | PF11 — GPIO port F bit 11 |
| Chân 50 | PF12 — GPIO port F bit 12 |
| Chân 51 | VSS — Ground |
| Chân 52 | VDD — Digital power supply |
| Chân 53 | PF13 — GPIO port F bit 13 |
| Chân 54 | PF14 — GPIO port F bit 14 |
| Chân 55 | PF15 — GPIO port F bit 15 |
| Chân 56 | PG0 — GPIO port G bit 0 |
| Chân 57 | PG1 — GPIO port G bit 1 |
| Chân 58 | PE7 — GPIO port E bit 7 |
| Chân 59 | PE8 — GPIO port E bit 8 |
| Chân 60 | PE9 — GPIO port E bit 9 |
| Chân 61 | VSS — Ground |
| Chân 62 | VDD — Digital power supply |
| Chân 63 | PE10 — GPIO port E bit 10 |
| Chân 64 | PE11 — GPIO port E bit 11 |
| Chân 65 | PE12 — GPIO port E bit 12 |
| Chân 66 | PE13 — GPIO port E bit 13 |
| Chân 67 | PE14 — GPIO port E bit 14 |
| Chân 68 | PE15 — GPIO port E bit 15 |
| Chân 69 | PB10 — GPIO port B bit 10 |
| Chân 70 | PB11 — GPIO port B bit 11 |
| Chân 71 | VCAP — Core regulator capacitor |
| Chân 72 | VDD — Digital power supply |
| Chân 73 | PB12 — GPIO port B bit 12 |
| Chân 74 | PB13 — GPIO port B bit 13 |
| Chân 75 | PB14 — GPIO port B bit 14 |
| Chân 76 | PB15 — GPIO port B bit 15 |
| Chân 77 | PD8 — GPIO port D bit 8 |
| Chân 78 | PD9 — GPIO port D bit 9 |
| Chân 79 | PD10 — GPIO port D bit 10 |
| Chân 80 | PD11 — GPIO port D bit 11 |
| Chân 81 | PD12 — GPIO port D bit 12 |
| Chân 82 | PD13 — GPIO port D bit 13 |
| Chân 83 | VSS — Ground |
| Chân 84 | VDD — Digital power supply |
| Chân 85 | PD14 — GPIO port D bit 14 |
| Chân 86 | PD15 — GPIO port D bit 15 |
| Chân 87 | PG2 — GPIO port G bit 2 |
| Chân 88 | PG3 — GPIO port G bit 3 |
| Chân 89 | PG4 — GPIO port G bit 4 |
| Chân 90 | PG5 — GPIO port G bit 5 |
| Chân 91 | PG6 — GPIO port G bit 6 |
| Chân 92 | PG7 — GPIO port G bit 7 |
| Chân 93 | PG8 — GPIO port G bit 8 |
| Chân 94 | VSS — Ground |
| Chân 95 | VDD — Digital power supply |
| Chân 96 | PC6 — GPIO port C bit 6 |
| Chân 97 | PC7 — GPIO port C bit 7 |
| Chân 98 | PC8 — GPIO port C bit 8 |
| Chân 99 | PC9 — GPIO port C bit 9 |
| Chân 100 | PA8 — GPIO port A bit 8 |
| Chân 101 | PA9 — GPIO port A bit 9 |
| Chân 102 | PA10 — GPIO port A bit 10 |
| Chân 103 | PA11 — GPIO port A bit 11 |
| Chân 104 | PA12 — GPIO port A bit 12 |
| Chân 105 | PA13 — GPIO port A bit 13 |
| Chân 106 | VSS — Ground |
| Chân 107 | VDD — Digital power supply |
| Chân 108 | PA14 — GPIO port A bit 14 |
| Chân 109 | PA15 — GPIO port A bit 15 |
| Chân 110 | PC10 — GPIO port C bit 10 |
| Chân 111 | PC11 — GPIO port C bit 11 |
| Chân 112 | PC12 — GPIO port C bit 12 |
| Chân 113 | PD0 — GPIO port D bit 0 |
| Chân 114 | PD1 — GPIO port D bit 1 |
| Chân 115 | PD2 — GPIO port D bit 2 |
| Chân 116 | PD3 — GPIO port D bit 3 |
| Chân 117 | PD4 — GPIO port D bit 4 |
| Chân 118 | PD5 — GPIO port D bit 5 |
| Chân 119 | VSS — Ground |
| Chân 120 | VDD — Digital power supply |
| Chân 121 | PD6 — GPIO port D bit 6 |
| Chân 122 | PD7 — GPIO port D bit 7 |
| Chân 123 | PG9 — GPIO port G bit 9 |
| Chân 124 | PG10 — GPIO port G bit 10 |
| Chân 125 | PG11 — GPIO port G bit 11 |
| Chân 126 | PG12 — GPIO port G bit 12 |
| Chân 127 | PG13 — GPIO port G bit 13 |
| Chân 128 | PG14 — GPIO port G bit 14 |
| Chân 129 | VSS — Ground |
| Chân 130 | VDD — Digital power supply |
| Chân 131 | PG15 — GPIO port G bit 15 |
| Chân 132 | PB3 — GPIO port B bit 3 |
| Chân 133 | PB4 — GPIO port B bit 4 |
| Chân 134 | PB5 — GPIO port B bit 5 |
| Chân 135 | PB6 — GPIO port B bit 6 |
| Chân 136 | PB7 — GPIO port B bit 7 |
| Chân 137 | BOOT0 — Boot mode selection |
| Chân 138 | PB8 — GPIO port B bit 8 |
| Chân 139 | PB9 — GPIO port B bit 9 |
| Chân 140 | PE0 — GPIO port E bit 0 |
| Chân 141 | PE1 — GPIO port E bit 1 |
| Chân 142 | VSS — Ground |
| Chân 143 | VDD — Digital power supply |
| Chân 144 | PDR_ON — Power-down reset enable |
Ứng dụng tiêu biểu
STM32H753ZIT6 phù hợp cho 6 Áp dụngs: Industrial Automation and PLCs, Motor Control and Drives, Medical Devices and Patient Monitors, Edge AI and Real-Time Signal Processing, High-End Audio and Graphical HMI, Networking and Communication Gateways.
Industrial Automation and PLCs
The STM32H753ZIT6 fits industrial programmable logic controllers because its 480 MHz Cortex-M7 core executes ladder-logic and motion-control loops with deterministic timing, while the 2 MB dual-bank Flash allows firmware updates without stopping the production line. Ethernet MAC and CAN FD interfaces connect directly to plant networks and fieldbus segments, and the 16-bit 3.6 MSPS ADC digitizes analog sensor inputs for process control. In a typical PLC design the MCU sits between isolated digital I/O and the backplane bus, running a real-time operating system. The trade-off is power: at 480 MHz the core draws substantially more than a Cortex-M4, so thermal vias and a copper pour under the LQFP-144 exposed pad are recommended for sealed enclosures.
Được đề xuất
Motor Control and Drives
The STM32H753ZIT6 is designed for field-oriented control of three-phase motors: its advanced timers generate complementary PWM with programmable dead-time, the 16-bit ADC samples phase currents at 3.6 MSPS to close the current loop, and the Cortex-M7 DSP instructions execute Park/Clarke transforms in a few cycles. At 480 MHz the device can run PWM frequencies above 20 kHz while still leaving headroom for position-loop and communication tasks. The dual-bank Flash enables over-the-air firmware updates in pumps and drives that cannot be taken offline. Designers should note that the integrated SMPS/LDO regulator architecture differs from STM32F7 parts, so the power-supply schematic must be reworked when migrating from an F7 design.
Được đề xuất
Medical Devices and Patient Monitors
The STM32H753ZIT6 suits patient monitors and infusion pumps because the hardware cryptographic accelerator provides secure boot and encrypted firmware storage, a requirement for connected medical equipment, while the 16-bit ADC and 12-bit DAC handle physiological signal acquisition and calibration output. The 2 MB dual-bank Flash supports fail-safe firmware updates in devices that must remain certified and available. In a monitor design the MCU processes ECG or SpO2 sample streams in real time and drives a graphical display through the Chrom-ART Accelerator. The main trade-off is that the -40 C to +85 C industrial grade is not AEC-Q100 qualified, so automotive-grade medical platforms should evaluate the STM32H7 automotive variants instead.
Được đề xuất
Edge AI and Real-Time Signal Processing
The STM32H753ZIT6 brings edge-AI inference to embedded systems through its 480 MHz Cortex-M7 core with double-precision FPU and DSP extensions, which accelerate neural-network kernels and FIR/FFT filtering without an external accelerator. 1 MB of SRAM holds intermediate tensors for small convolutional models, and the 2 MB Flash stores weights and application code. In a predictive-maintenance node the MCU runs vibration FFT analysis and a classifier locally, sending only results over Ethernet or CAN FD. The trade-off versus a dedicated NPU is throughput per watt: the Cortex-M7 is flexible but slower than a fixed-function accelerator, so designers should profile model latency before committing to this part.
Được đề xuất
High-End Audio and Graphical HMI
The STM32H753ZIT6 supports high-end audio and graphical user interfaces because the Chrom-ART Accelerator offloads 2D blitting and alpha-blending from the CPU, allowing smooth display updates on TFT panels while the Cortex-M7 core runs audio DSP. The 12-bit DAC and I2S/SAI peripherals interface directly to audio codecs, and the 480 MHz core executes sample-rate conversion and equalization in real time. In an audio mixer the MCU handles USB audio streaming, DSP effects, and a touchscreen UI concurrently. The design consideration is memory bandwidth: driving a large RGB display from internal SRAM competes with audio buffers, so external SDRAM via the FMC is often added for framebuffer storage.
Được đề xuất
Networking and Communication Gateways
The STM32H753ZIT6 is used in industrial gateways and protocol converters because it integrates a 10/100 Ethernet MAC with DMA, USB OTG HS/FS, and CAN FD on a single die, eliminating external bridge chips. The 480 MHz core runs TCP/IP stacks, Modbus, and protocol translation with low latency, while the hardware crypto accelerator offloads TLS handshakes for secure cloud connectivity. In a gateway design the MCU bridges a CAN FD fieldbus to an Ethernet backhaul, buffering frames in the 1 MB SRAM. The trade-off is that the integrated Ethernet MAC requires an external PHY and magnetics, so board area and BOM cost must account for those components plus the RM0433-recommended layout practices.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32H753ZIT6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32H743ZIT6 | STM32H753IIT6 | STM32H750ZBT6 | STM32H753BGT6 | STM32H745IIT6 |
|---|---|---|---|---|---|---|
| Package | LQFP-144 | LQFP-144 - same | LQFP-176 | LQFP-144 - same | LQFP-208 | LQFP-176 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core / Frequency | Cortex-M7 @ 480 MHz | Cortex-M7 @ 480 MHz | Cortex-M7 @ 480 MHz | Cortex-M7 @ 480 MHz | Cortex-M7 @ 480 MHz | Cortex-M7 @ 480 MHz + Cortex-M4 @ 240 MHz |
| Flash Memory | 2 MB dual-bank | 2 MB dual-bank | 2 MB dual-bank | 128 KB | 2 MB dual-bank | 2 MB dual-bank |
| SRAM | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| Hardware Crypto Accelerator | Yes (AES, HASH, RNG) | No | Yes | No | Yes | No |
| Ethernet MAC | 10/100 with DMA | 10/100 with DMA | 10/100 with DMA | 10/100 with DMA | 10/100 with DMA | 10/100 with DMA |
| Supply Voltage | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
Bảo phân biệt quan trọng
- Hardware cryptographic accelerator integrated on-die (vsSTM32H743ZIT6)
- 2 MB dual-bank Flash with read-while-write (vsSTM32H750ZBT6)
- Single-core Cortex-M7 with full 480 MHz headroom (vsSTM32H745IIT6)
Ghi chú thiết kế
Decouple every VDD pin with a 100 nF ceramic capacitor placed as close to the pin as possible, plus at least one 4.7 uF bulk capacitor per supply domain. Feed VDDA through a ferrite bead from the digital 3.3 V rail and add a dedicated 100 nF plus 1 uF capacitor at the VDDA pin. The VCAP pin requires the regulator stabilization capacitor specified in the STM32H753xI datasheet; omitting it prevents the internal core regulator from starting.
Route the 32.768 kHz and HSE crystal traces as short, symmetric, guarded pairs with a solid ground reference directly beneath them, and keep switching nodes such as the SMPS inductor away from the crystal and analog pins. For the LQFP-144 land pattern, use the manufacturer-recommended pad geometry and place a grid of thermal vias under the exposed pad to spread heat into an internal ground plane.
Estimated: migrating from an STM32F7 design requires power-supply rework because the H7 uses an integrated LDO/SMPS regulator with software-controlled power modes instead of the F7 BYPASS_REG pin. Also verify BOOT0 and PDR_ON strapping before first power-up, and confirm that any security-peripheral initialization code is present when moving from STM32H743 to STM32H753, since the crypto block is the only functional difference.
Thông tin tuân thủ
RoHS and REACH compliance confirmed from distributor listings. The STM32H753ZIT6 is industrial grade (-40 C to +85 C) and is not AEC-Q100 qualified; automotive designs should evaluate STM32H7 automotive-grade variants.
