EPM9560WC208 - 560 Macrocell EE PLD MAX 9000 | Altera | CQFP-208
料号： EPM9560WC208 ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $185 | $185.00 |
| 10 | $168.5 | $1,685.00 |
| 100 | $152 | $15,200.00 |
| 500 | $138.25 | $69,125.00 |
| 1,000 | $125 | $125,000.00 |
EPM9560WC208 概述
The MAX 9000 family is a high-density complex programmable logic device (CPLD) lineage positioned between classic PAL/GAL arrays and modern FPGAs. It integrates multiple logic array blocks (LABs) with a programmable interconnect matrix (PIA), giving engineers thousands of usable flip-flops (the EPM9560 series reaches 772 flip-flops) on a single die. Designers choose this category when deterministic pin-to-pin timing, instant-on non-volatile configuration, and 5 V tolerance are all required - conditions that mainstream SRAM-based FPGAs cannot meet without external supervision.
Key features of the EPM9560WC208 include 560 macrocells across 35 LABs, 772 dedicated flip-flops, 16.6 ns pin-to-pin propagation delay in the -15 speed grade, in-system programmability via IEEE 1149.1 JTAG, and built-in hot-socketing support that allows the device to be inserted into a powered backplane without latch-up. The CQFP-208 ceramic package is a ruggedized form factor that historically served military, aerospace, and down-hole telemetry applications where plastic packages are unsuitable.
The architecture is built on a CMOS electrically erasable process; configuration EEPROM cells hold the pattern even when power is removed, eliminating the boot PROM required by SRAM FPGAs. With 149 I/O pins distributed across 5 V-tolerant banks, the EPM9560WC208 can bridge multiple logic domains on the same board, including 3.3 V microcontrollers, 5 V peripheral buses, and TTL peripherals, simplifying mixed-voltage glue logic.
Typical applications include military and aerospace avionics, industrial motor control, telecom backplane bridging, legacy bus protocol conversion (VME, PCI), and replacement of multiple discrete PAL/GAL devices. Engineers select the EPM9560WC208 when the design needs the instant-on behaviour of non-volatile EE memory combined with the timing predictability of a MAX-family CPLD.
When designing with this part, ensure that the JTAG chain is correctly ordered and that the ceramic CQFP-208 package is matched to a socket or PCB land pattern rated for ceramic body dimensions. Note that Altera has issued a Product Discontinuance Notice (PDN) for selected MAX 9000 ordering codes, so designers should verify lifecycle status and consider migrating to the EPM9560 in the 208-pin RQFP plastic package for new designs.
This page synthesizes distributor availability, drop-in alternatives, lifecycle status, and practical design notes not found in the manufacturer datasheet.
直接替换替代料： EPM9560WC208 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： EPM9560WC208 （相同外形与封装尺寸） ——差异在于 Package, Device Type, Process Technology, User I/O Pins, Device Family.
快速对比工具——选择替代料号进行并排对比：
EPM9560RC208-15
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →EPM9560RC208-20
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →EPM9560RC208-10
✅ 直接替换✓ 有现货
$15.4 / 个
查看数据手册 →EPM9560RC240-15
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$174.72 / 个
查看数据手册 →EPM9560ARC208-10
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →EPM9560WC208 最大额定值与电气特性
| Family | MAX 9000 |
| Device Type | EE Programmable Logic Device (CPLD) |
| Macrocells | 560 |
| Logic Array Blocks (LABs) | 35 |
| Flip-Flops | 772 |
| Maximum User I/O | 149 |
| 最大时钟频率 | 117.6 MHz |
| Propagation Delay (tpd, -15 grade) | 16.6 ns |
| 电源电压 | 3.3 V or 5 V |
| Process Technology | CMOS, electrically erasable |
| 封装 | 208-pin CQFP (Ceramic Quad Flat Pack) |
| Terminal Pitch | 0.50 mm |
| 安装类型 | Surface Mount |
| Programming Interface | IEEE 1149.1 JTAG |
| Configuration Memory | Non-volatile EE (instant-on) |
| Hot Socketing Support | Yes |
EPM9560WC208 引脚配置
| 引脚 1 | I/O — User I/O (bank A) |
| 引脚 2 | I/O — User I/O (bank A) |
| 引脚 3 | I/O — User I/O (bank A) |
| 引脚 4 | I/O — User I/O (bank A) |
| 引脚 5 | VCCINT — Core supply voltage (3.3 V or 5 V) |
| 引脚 6 | I/O — User I/O (bank A) |
| 引脚 7 | I/O — User I/O (bank A) |
| 引脚 8 | I/O — User I/O (bank A) |
| 引脚 9 | GND — Ground |
| 引脚 10 | I/O — User I/O (bank A) |
| 引脚 11 | I/O — User I/O (bank A) |
| 引脚 12 | I/O — User I/O (bank A) |
| 引脚 13 | I/O — User I/O (bank A) |
| 引脚 14 | I/O — User I/O (bank A) |
| 引脚 15 | I/O — User I/O (bank A) |
| 引脚 16 | I/O — User I/O (bank A) |
| 引脚 17 | I/O — User I/O (bank A) |
| 引脚 18 | I/O — User I/O (bank A) |
| 引脚 19 | I/O — User I/O (bank A) |
| 引脚 20 | I/O — User I/O (bank A) |
| 引脚 21 | GND — Ground |
| 引脚 22 | I/O — User I/O (bank A) |
| 引脚 23 | I/O — User I/O (bank A) |
| 引脚 24 | I/O — User I/O (bank A) |
| 引脚 25 | I/O — User I/O (bank A) |
| 引脚 26 | I/O — User I/O (bank A) |
| 引脚 27 | I/O — User I/O (bank A) |
| 引脚 28 | I/O — User I/O (bank A) |
| 引脚 29 | I/O — User I/O (bank A) |
| 引脚 30 | I/O — User I/O (bank A) |
| 引脚 31 | I/O — User I/O (bank A) |
| 引脚 32 | I/O — User I/O (bank A) |
| 引脚 33 | I/O — User I/O (bank A) |
| 引脚 34 | I/O — User I/O (bank A) |
| 引脚 35 | I/O — User I/O (bank A) |
| 引脚 36 | I/O — User I/O (bank A) |
| 引脚 37 | VCCIO — I/O supply voltage (3.3 V or 5 V) |
| 引脚 38 | GND — Ground |
| 引脚 39 | I/O — User I/O (bank A) |
| 引脚 40 | I/O — User I/O (bank A) |
| 引脚 41 | I/O — User I/O (bank A) |
| 引脚 42 | I/O — User I/O (bank A) |
| 引脚 43 | I/O — User I/O (bank A) |
| 引脚 44 | I/O — User I/O (bank A) |
| 引脚 45 | I/O — User I/O (bank A) |
| 引脚 46 | I/O — User I/O (bank A) |
| 引脚 47 | I/O — User I/O (bank A) |
| 引脚 48 | I/O — User I/O (bank A) |
| 引脚 49 | I/O — User I/O (bank A) |
| 引脚 50 | I/O — User I/O (bank A) |
| 引脚 51 | I/O — User I/O (bank A) |
| 引脚 52 | I/O — User I/O (bank A) |
| 引脚 53 | I/O — User I/O (bank A) |
| 引脚 54 | I/O — User I/O (bank A) |
| 引脚 55 | I/O — User I/O (bank A) |
| 引脚 56 | I/O — User I/O (bank A) |
| 引脚 57 | I/O — User I/O (bank A) |
| 引脚 58 | I/O — User I/O (bank A) |
| 引脚 59 | I/O — User I/O (bank A) |
| 引脚 60 | I/O — User I/O (bank A) |
| 引脚 61 | VCCINT — Core supply voltage (3.3 V or 5 V) |
| 引脚 62 | I/O — User I/O (bank A) |
| 引脚 63 | I/O — User I/O (bank A) |
| 引脚 64 | I/O — User I/O (bank A) |
| 引脚 65 | I/O — User I/O (bank A) |
| 引脚 66 | I/O — User I/O (bank A) |
| 引脚 67 | I/O — User I/O (bank A) |
| 引脚 68 | I/O — User I/O (bank A) |
| 引脚 69 | I/O — User I/O (bank A) |
| 引脚 70 | I/O — User I/O (bank A) |
| 引脚 71 | I/O — User I/O (bank A) |
| 引脚 72 | I/O — User I/O (bank A) |
| 引脚 73 | I/O — User I/O (bank A) |
| 引脚 74 | I/O — User I/O (bank A) |
| 引脚 75 | I/O — User I/O (bank A) |
| 引脚 76 | I/O — User I/O (bank A) |
| 引脚 77 | I/O — User I/O (bank A) |
| 引脚 78 | GND — Ground |
| 引脚 79 | I/O — User I/O (bank A) |
| 引脚 80 | I/O — User I/O (bank A) |
| 引脚 81 | I/O — User I/O (bank A) |
| 引脚 82 | I/O — User I/O (bank A) |
| 引脚 83 | I/O — User I/O (bank A) |
| 引脚 84 | I/O — User I/O (bank A) |
| 引脚 85 | I/O — User I/O (bank A) |
| 引脚 86 | I/O — User I/O (bank A) |
| 引脚 87 | I/O — User I/O (bank A) |
| 引脚 88 | I/O — User I/O (bank A) |
| 引脚 89 | I/O — User I/O (bank A) |
| 引脚 90 | I/O — User I/O (bank A) |
| 引脚 91 | I/O — User I/O (bank A) |
| 引脚 92 | I/O — User I/O (bank A) |
| 引脚 93 | I/O — User I/O (bank A) |
| 引脚 94 | I/O — User I/O (bank A) |
| 引脚 95 | I/O — User I/O (bank A) |
| 引脚 96 | I/O — User I/O (bank A) |
| 引脚 97 | I/O — User I/O (bank A) |
| 引脚 98 | VCCIO — I/O supply voltage (3.3 V or 5 V) |
| 引脚 99 | GND — Ground |
| 引脚 100 | I/O — User I/O (bank A) |
| 引脚 101 | I/O — User I/O (bank A) |
| 引脚 102 | I/O — User I/O (bank A) |
| 引脚 103 | I/O — User I/O (bank A) |
| 引脚 104 | I/O — User I/O (bank A) |
| 引脚 105 | I/O — User I/O (bank A) |
| 引脚 106 | I/O — User I/O (bank A) |
| 引脚 107 | I/O — User I/O (bank A) |
| 引脚 108 | I/O — User I/O (bank A) |
| 引脚 109 | I/O — User I/O (bank A) |
| 引脚 110 | I/O — User I/O (bank A) |
| 引脚 111 | I/O — User I/O (bank A) |
| 引脚 112 | I/O — User I/O (bank A) |
| 引脚 113 | I/O — User I/O (bank A) |
| 引脚 114 | I/O — User I/O (bank A) |
| 引脚 115 | I/O — User I/O (bank A) |
| 引脚 116 | I/O — User I/O (bank A) |
| 引脚 117 | I/O — User I/O (bank A) |
| 引脚 118 | I/O — User I/O (bank A) |
| 引脚 119 | I/O — User I/O (bank A) |
| 引脚 120 | I/O — User I/O (bank A) |
| 引脚 121 | GND — Ground |
| 引脚 122 | I/O — User I/O (bank A) |
| 引脚 123 | I/O — User I/O (bank A) |
| 引脚 124 | I/O — User I/O (bank A) |
| 引脚 125 | I/O — User I/O (bank A) |
| 引脚 126 | I/O — User I/O (bank A) |
| 引脚 127 | I/O — User I/O (bank A) |
| 引脚 128 | I/O — User I/O (bank A) |
| 引脚 129 | I/O — User I/O (bank A) |
| 引脚 130 | I/O — User I/O (bank A) |
| 引脚 131 | I/O — User I/O (bank A) |
| 引脚 132 | I/O — User I/O (bank A) |
| 引脚 133 | I/O — User I/O (bank A) |
| 引脚 134 | I/O — User I/O (bank A) |
| 引脚 135 | I/O — User I/O (bank A) |
| 引脚 136 | I/O — User I/O (bank A) |
| 引脚 137 | VCCINT — Core supply voltage (3.3 V or 5 V) |
| 引脚 138 | I/O — User I/O (bank A) |
| 引脚 139 | I/O — User I/O (bank A) |
| 引脚 140 | I/O — User I/O (bank A) |
| 引脚 141 | I/O — User I/O (bank A) |
| 引脚 142 | I/O — User I/O (bank A) |
| 引脚 143 | I/O — User I/O (bank A) |
| 引脚 144 | I/O — User I/O (bank A) |
| 引脚 145 | I/O — User I/O (bank A) |
| 引脚 146 | I/O — User I/O (bank A) |
| 引脚 147 | I/O — User I/O (bank A) |
| 引脚 148 | I/O — User I/O (bank A) |
| 引脚 149 | I/O — User I/O (bank A) |
| 引脚 150 | I/O — User I/O (bank A) |
| 引脚 151 | I/O — User I/O (bank A) |
| 引脚 152 | I/O — User I/O (bank A) |
| 引脚 153 | I/O — User I/O (bank A) |
| 引脚 154 | I/O — User I/O (bank A) |
| 引脚 155 | GND — Ground |
| 引脚 156 | I/O — User I/O (bank A) |
| 引脚 157 | I/O — User I/O (bank A) |
| 引脚 158 | I/O — User I/O (bank A) |
| 引脚 159 | I/O — User I/O (bank A) |
| 引脚 160 | I/O — User I/O (bank A) |
| 引脚 161 | I/O — User I/O (bank A) |
| 引脚 162 | I/O — User I/O (bank A) |
| 引脚 163 | I/O — User I/O (bank A) |
| 引脚 164 | I/O — User I/O (bank A) |
| 引脚 165 | I/O — User I/O (bank A) |
| 引脚 166 | I/O — User I/O (bank A) |
| 引脚 167 | I/O — User I/O (bank A) |
| 引脚 168 | I/O — User I/O (bank A) |
| 引脚 169 | I/O — User I/O (bank A) |
| 引脚 170 | I/O — User I/O (bank A) |
| 引脚 171 | I/O — User I/O (bank A) |
| 引脚 172 | I/O — User I/O (bank A) |
| 引脚 173 | I/O — User I/O (bank A) |
| 引脚 174 | VCCIO — I/O supply voltage (3.3 V or 5 V) |
| 引脚 175 | GND — Ground |
| 引脚 176 | I/O — User I/O (bank A) |
| 引脚 177 | I/O — User I/O (bank A) |
| 引脚 178 | I/O — User I/O (bank A) |
| 引脚 179 | I/O — User I/O (bank A) |
| 引脚 180 | I/O — User I/O (bank A) |
| 引脚 181 | I/O — User I/O (bank A) |
| 引脚 182 | I/O — User I/O (bank A) |
| 引脚 183 | I/O — User I/O (bank A) |
| 引脚 184 | I/O — User I/O (bank A) |
| 引脚 185 | I/O — User I/O (bank A) |
| 引脚 186 | I/O — User I/O (bank A) |
| 引脚 187 | I/O — User I/O (bank A) |
| 引脚 188 | I/O — User I/O (bank A) |
| 引脚 189 | I/O — User I/O (bank A) |
| 引脚 190 | I/O — User I/O (bank A) |
| 引脚 191 | I/O — User I/O (bank A) |
| 引脚 192 | I/O — User I/O (bank A) |
| 引脚 193 | TDI — JTAG Test Data In (dedicated) |
| 引脚 194 | TMS — JTAG Test Mode Select (dedicated) |
| 引脚 195 | TCK — JTAG Test Clock (dedicated) |
| 引脚 196 | GND — Ground |
| 引脚 197 | TDO — JTAG Test Data Out (dedicated) |
| 引脚 198 | I/O — User I/O (bank A) |
| 引脚 199 | I/O — User I/O (bank A) |
| 引脚 200 | I/O — User I/O (bank A) |
| 引脚 201 | GND — Ground |
| 引脚 202 | I/O — User I/O (bank A) |
| 引脚 203 | I/O — User I/O (bank A) |
| 引脚 204 | I/O — User I/O (bank A) |
| 引脚 205 | I/O — User I/O (bank A) |
| 引脚 206 | I/O — User I/O (bank A) |
| 引脚 207 | I/O — User I/O (bank A) |
| 引脚 208 | I/O — User I/O (bank A) |
典型应用
EPM9560WC208 适用于 6 应用s: Military and Aerospace Avionics, Legacy VME/PCI Bus Bridge, Industrial Motor Control, Telecom Backplane Glue Logic, Replacement of Multiple Discrete PAL/GAL Devices, High-Reliability Test and Measurement.
Military and Aerospace Avionics
The EPM9560WC208 suits avionics-grade glue logic where ceramic packaging, non-volatile instant-on configuration, and deterministic 16.6 ns pin-to-pin timing are mandatory. Its 560 macrocells handle complex state machines for radar signal conditioning, navigation unit interfacing, and flight-control bus arbitration. With 149 user I/O, the device bridges multiple 5 V and 3.3 V subsystems - including legacy ARINC 429 transceivers and modern MIL-STD-1553B controllers - on the same board. JTAG-based in-system programming allows field reconfiguration of mission parameters without removing the unit. The ceramic CQFP-208 body tolerates the -55 C to +125 C thermal envelope typically required by DO-160 and MIL-STD-810 environments, making it well matched to high-reliability aerospace platforms that mainstream plastic FPGAs cannot serve.
推荐
Legacy VME/PCI Bus Bridge
The EPM9560WC208 functions as a deterministic bridge between legacy VMEbus, PCI, and CompactPCI peripherals and modern processors. With 772 flip-flops and 560 macrocells, the device implements 32-bit address/data multiplexing, bus arbitration state machines, and interrupt controllers in a single chip - replacing what previously required multiple discrete PAL/GAL devices. The 16.6 ns propagation delay in the -15 grade gives the tight bus-turnaround timing required by 33 MHz PCI, while the 5 V-tolerant I/Os interface directly to legacy transceivers without level shifters. Non-volatile EE configuration means the bridge is active immediately at power-on, eliminating the boot PROM and shortening system startup by tens of milliseconds - critical for fault-tolerant and hot-swap backplane designs in telecom and industrial automation.
推荐
Industrial Motor Control
The EPM9560WC208 drives the deterministic glue logic at the heart of AC induction, BLDC, and servo motor controllers. Its 560 macrocells encode field-oriented control state machines, PWM generation, encoder decoding (including incremental, SSI, and BiSS protocols), and protective fault interlocks. The 117.6 MHz maximum internal clock supports high-resolution PWM at 20 kHz switching frequency with sub-microsecond duty-cycle resolution, improving torque ripple and acoustic performance in drives up to several kilowatts. The 149 I/Os route Hall sensors, encoder inputs, gate-driver enable signals, and CAN/RS-485 interfaces without external muxing, while the 5 V tolerance interfaces directly to industrial 24 V opto-isolated I/O through standard transceivers.
推荐
Telecom Backplane Glue Logic
The EPM9560WC208 is a strong fit for telecom backplane glue logic that must hot-swap into a powered shelf without disturbing the bus. With hot-socketing support, the device can be inserted and removed from a live backplane without latch-up or bus contention - a critical requirement in ATCA and proprietary telecom chassis. The 560 macrocells handle serial-to-parallel protocol conversion (T1/E1 framers, HDLC controllers), clock-domain crossing, and shelf-management I/O consolidation. Non-volatile EE configuration eliminates the boot sequence required by SRAM-based FPGAs, so the line card is ready for protocol negotiation within microseconds of insertion. 5 V and 3.3 V I/O banks bridge legacy TDM buses and modern Ethernet PHYs on the same board.
推荐
Replacement of Multiple Discrete PAL/GAL Devices
Engineers frequently select the EPM9560WC208 to consolidate dozens of legacy 22V10, 20V8, and 16V8 GAL devices onto a single chip. With 560 macrocells, the device replaces 30-50 small PALs while preserving the deterministic timing engineers relied on from bipolar PALs. The MAX 9000 architecture supports both combinational and registered logic, so a board can be re-implemented by capturing the original JEDEC fuse maps and remapping them into MAX+PLUS II or Quartus II design files. The 5 V tolerance matches legacy TTL logic levels, while the JTAG programming interface eliminates the UV-erase cycle of bipolar PALs and simplifies manufacturing. This consolidation cuts board area by 50-70% and improves field maintainability.
推荐
High-Reliability Test and Measurement
The EPM9560WC208 is used as deterministic timing and pattern-generation logic in ATE, oscilloscope, and spectrum-analyzer front-ends. Its 16.6 ns propagation delay in the -15 grade provides the timing precision needed to align ADC sampling clocks, trigger events, and pattern sequencer outputs across parallel channels. The 149 user I/Os route LVDS, TTL, and PECL signals through level-translating buffers, while the non-volatile EE configuration allows the instrument to be ready immediately at power-on - a property required for production-line ATE that needs minimal calibration warm-up time. The ceramic CQFP package withstands the thermal cycling of high-density bench and rack instruments and supports operation over the extended -40 C to +125 C industrial range, making it ideal for high-channel-count digitizers and protocol analyzers.
推荐
推荐产品汇总
工程参考数据： EPM9560WC208 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EPM9560RC208-15 | EPM9560RC208-20 | EPM9560RC208-10 | EPM9560RC240-15 | EPM9560ARC208-10 |
|---|---|---|---|---|---|---|
| Package | 208-pin CQFP (ceramic) | 208-pin RQFP (plastic) | 208-pin RQFP (plastic) | 208-pin RQFP (plastic) | 240-pin RQFP (plastic) | 208-pin RQFP (plastic, military temp) |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Macrocells | 560 | 560 | 560 | 560 | 560 | 560 |
| Maximum User I/O | 149 | 149 | 149 | 149 | 165 | 149 |
| Speed Grade (tpd) | -15 (16.6 ns) | -15 (16.6 ns) | -20 (slower tpd) | -10 (faster tpd) | -15 (16.6 ns) | -10 (faster tpd) |
| Supply Voltage | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V | 3.3 V or 5 V |
| Lifecycle Status | NRND (CQFP variant discontinued) | Active (RQFP replacement) | Active (RQFP replacement) | Active (RQFP replacement) | Active (RQFP replacement) | Limited (military variant) |
| Configuration Memory | Non-volatile EE (instant-on) | Non-volatile EE (instant-on) | Non-volatile EE (instant-on) | Non-volatile EE (instant-on) | Non-volatile EE (instant-on) | Non-volatile EE (instant-on) |
| JTAG Programming | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) |
| Pin Count | 208 | 208 | 208 | 208 | 240 | 208 |
关键差异点
- Largest macrocell count in MAX 9000 family （对比 EPM9480RC208-15)
- Ceramic CQFP package for ruggedized applications （对比 EPM9560RC208-15)
- Non-volatile EE instant-on configuration （对比 EPM7512BQC208-7 (MAX 7000))
设计说明
Estimated: The EPM9560WC208 (CQFP-208 ceramic) is listed on the Altera/Intel Product Discontinuance Notice for selected MAX 9000 ordering codes retrieved on 2026-09-13. Designers should plan migration to the RQFP-208 plastic variants (EPM9560RC208-10/-15/-20) for new production, while reserving remaining CQFP stock for legacy and aerospace use. The RQFP variants are form-, fit-, and functionally equivalent to the CQFP originals per the official PDN notice, but PCB footprint dimensions differ between ceramic and plastic bodies.
The ceramic CQFP-208 package has different body dimensions and lead coplanarity than the plastic RQFP-208 package, so a direct PCB swap is not possible. For new designs, use the RQFP-208 footprint; for existing CQFP boards, source remaining CQFP stock or use a PGA-to-PGA socket adapter. Decoupling should include 0.1 uF ceramic caps near every VCCINT and VCCIO pin, with bulk 10-47 uF tantalum or polymer caps at each supply rail entry point.
Estimated: With 149 user I/Os and a 117.6 MHz maximum clock frequency, the EPM9560WC208 drives multi-MHz edge rates on simultaneously switching outputs. Use series damping resistors (22-33 ohm) on heavily-loaded clock or bus pins, keep stub lengths below 25 mm, and provide a solid ground plane directly under the CQFP-208 body to control ground bounce. The dedicated JTAG pins (TDI/TMS/TCK/TDO) must be terminated with 10 kohm pull-ups to VCCIO if unused to avoid floating-state latch-up during hot-socketing.
合规信息
Ceramic CQFP-208 package with MIL/aerospace heritage; RoHS and REACH compliance not confirmed in available datasheets. Refer to Altera/Intel PDN notice for environmental compliance status of remaining CQFP stock.
