بەرهەمەکان (3,200+)

LM2904DT - Dual 1.1MHz General Purpose Op Amp | STMicroelectronics | SOIC-8
LM2904DT

LM2904DT - Dual 1.1MHz General Purpose Op Amp | STMicroelectronics | SOIC-8

The STMicroelectronics LM2904DT is a low-power dual general-purpose operational amplifier providing two independent, internally frequency-compensated amplifiers in an 8-pin SOIC (SOP-8) surface-mount package, with a 1.1 MHz unity-gain bandwidth and single-supply operation for automotive and industrial control systems. An operational amplifier (op amp) is a high-gain differential amplifier that compares an inverting and a non-inverting input and drives its output to amplify the difference between them. When the frequency compensation network is integrated on-chip, the part is called internally compensated and is stable at unity gain without external components. The dual configuration places two independent amplifiers in a single 8-SOIC body, roughly halving the footprint compared with two discrete single amplifiers. In the product hierarchy the device sits as an operational amplifier within analog amplifier ICs and, in turn, within integrated circuits. Key features include two independent channels in one 8-SOIC package, a 1.1 MHz gain-bandwidth product, internal frequency compensation that removes external compensation parts, a low power supply drain that is independent of the magnitude of the output voltage swing, and single-supply operation over a wide voltage range. The LM2904 family was designed specifically for automotive and industrial control systems, so robustness and supply-voltage tolerance matter more than precision offset or ultra-low noise. Internally the device uses a classic internally compensated bipolar input stage with single-ended outputs. Both amplifiers share one supply rail and one ground reference, so bypass and grounding rules apply to the whole package: place a small ceramic capacitor adjacent to the supply pin and add local bulk decoupling near the pins. Output swing is not rail-to-rail, so the load must be chosen so the output stays inside the supply range, and the input common-mode range must be respected when signals approach the rails. Typical uses include motor and solenoid feedback loops in automotive electronic control units, industrial sensor signal conditioning, bridge and transducer amplification, low-side current sensing, and general DC buffering inside PLC and instrumentation racks. Two independent channels in one package also serve a control loop and a monitoring channel together. One design tip: keep feedback routing short, guard high-impedance input nodes against pickup, and decouple the supply at the package. Do not select this amplifier where rail-to-rail input or output, very low noise, or micro-power operation is required; choose a precision or CMOS-input amplifier family instead. This page combines the manufacturer specification summary, a complete pin map for the SOIC-8 footprint, drop-in alternatives with quantified parameter differences, and practical power, layout, and signal-integrity notes that are not combined in a single manufacturer document.

RFQ پەیوەندی
LM2904EDR2G - Dual Low-Power Operational Amplifier | onsemi
LM2904EDR2G

LM2904EDR2G - Dual Low-Power Operational Amplifier | onsemi

onsemi LM2904EDR2G is a dual, general-purpose operational amplifier with 2 amplifier channels in an 8-pin SOIC package. It is designed for low power drain, common-mode input operation extending toward ground or VEE, and use with either a single supply or split supplies. These characteristics make it suitable for battery-operated instrumentation, sensor signal conditioning, audio and communication circuits, and general analog control systems where two independent amplifier sections are required. An operational amplifier is an analog integrated circuit that uses high-gain differential amplification with negative feedback to create stable, controlled gain. The dual-amplifier configuration combines two amplifier sections in one package, reducing board area compared with two separate single amplifiers. Its common-mode input range extending toward ground or VEE is particularly useful in single-supply systems, where signals may be referenced close to the lower supply rail. The LM2904EDR2G is positioned as a low-power, general-purpose amplifier rather than a high-speed or precision device. Its dual-channel architecture supports independent signal paths within one package, while single-supply or split-supply operation allows integration into both grounded and bipolar-style signal chains. The 8-SOIC package provides a familiar surface-mount footprint suitable for conventional PCB assembly. The LM2904 family derives its circuit design from the same basic architecture used in quad operational amplifiers, with the LM2904 providing two amplifier sections. This family positioning supports familiar design conventions and makes the device relevant to applications previously addressed by discrete or multi-package amplifier arrangements. Exact input offset, bandwidth, current, noise, and voltage-limit figures should be confirmed against the manufacturer datasheet for the selected operating condition. Typical applications include DC sensor amplification, low-side current sensing, audio preamplification, industrial signal conditioning, temperature-measurement circuits, and portable equipment powered from a single battery. In each case, the dual section can process two related or independent channels while operating close to the lower supply rail. Decoupling and grounding remain important because they directly affect stability and measured signal quality. For PCB implementation, place the device power pins and input and output traces according to the manufacturer pin-description table. Use a stable reference ground, route sensitive input lines away from switching nodes, and provide local supply bypassing to limit disturbance reaching the amplifier. Verify the final circuit against minimum gain, output swing, slew rate, and common-mode limits before production. This product page combines the exact ordering information with practical guidance for dual-amplifier selection, pinout use, power-rail planning, and replacement assessment. It also identifies compatible circuit roles and highlights where engineers must verify operating limits rather than assume that every low-power dual amplifier is interchangeable.

RFQ پەیوەندی
LM2904F-E2 - Dual Ground-Sense Op Amp, 3-32V | ROHM Semiconductor
LM2904F-E2

LM2904F-E2 - Dual Ground-Sense Op Amp, 3-32V | ROHM Semiconductor

The ROHM Semiconductor LM2904F-E2 is a dual ground-sense operational amplifier designed for single-supply operation from 3V to 32V. The device is specified in an 8-pin SOP package and is intended for general-purpose amplifier applications requiring low current consumption, wide operating supply voltage, and input/output common-mode range extending toward ground. The LM2904F-E2 is identified by ROHM as a ground-sense operational amplifier and is not recommended for new designs. A ground-sense operational amplifier is an op-amp configuration designed to measure or amplify small voltage signals referenced to ground, especially signals whose lower operating range is close to 0V. The LM2904 family combines two amplifiers in one package, allowing each channel to be used independently for signal conditioning, buffering, or low-level voltage amplification. Its wide supply-voltage range allows operation from 3V single-supply systems through higher-voltage industrial control and instrumentation circuits. The verified product information identifies the LM2904F-E2 as a standard general-purpose amplifier with two circuits, an 8-SOP package, and a 3V to 32V operating supply range. ROHM's product page also identifies the device as a ground-sense operational amplifier and states that it cannot be used for new designs. The -E2 suffix denotes the manufacturer's ordering or packaging designation, while the F variant identifies the ground-sense amplifier family. Typical uses include current-sense signal conditioning, sensor-interface circuits, low-voltage control systems, and instrumentation in which the input signal can approach the negative supply rail. The dual configuration can reduce board area when two related analog channels are required. The 8-pin SOP package is also compatible with conventional through-hole and leaded assembly processes, although current designs should confirm the availability and lifecycle status of the exact suffix before committing a new production release. Designers should review the manufacturer datasheet for the complete electrical limits, input common-mode behavior, output swing, bias-current specifications, noise values, compensation stability, and recommended decoupling. A stable bypass capacitor should be placed close to the supply pins, and unused input channels should be handled according to the datasheet's recommended configuration. Because the manufacturer does not recommend this part for new designs, engineers should normally evaluate a current recommended dual operational amplifier with the same 8-pin footprint and equivalent electrical performance. This page combines the manufacturer product information, distributor identification, lifecycle notice, package data, and practical engineering guidance for engineers evaluating the LM2904F-E2 or searching for a compatible replacement.

RFQ پەیوەندی
LM2904FJ-E2 - Dual Ground-Sense Op Amp | ROHM | Sensors
LM2904FJ-E2

LM2904FJ-E2 - Dual Ground-Sense Op Amp | ROHM | Sensors

The ROHM Semiconductor LM2904FJ-E2 is a dual ground-sense operational amplifier with two amplifier circuits, a single-supply operating range of 3 V to 32 V, and low current consumption in an 8-SOP-J package. Its input and output ground-sense architecture allows the device to operate near the lower supply rail when the system requires common-mode input and output behavior close to ground. A ground-sense operational amplifier is a voltage-feedback amplifier designed for applications where the signal and output can operate near the negative supply rail. Within the broader hierarchy, the LM2904FJ-E2 is an operational amplifier, an analog amplifier IC, and a member of the power-management and signal-conditioning component category. The dual configuration provides two independent amplifier channels in one package, reducing board area in instrumentation and sensor-interface circuits that require more than one amplification stage. The principal device characteristics are its dual-circuit configuration, 3 V to 32 V single-supply range, low current consumption, and input/output ground-sense operation. The 8-SOP-J construction supports conventional surface-mount assembly. Unlike precision, low-noise amplifier families optimized for very small signals, this device is positioned as a general-purpose ground-sense amplifier for cost-conscious industrial and instrumentation designs. The LM2904FJ-E2 can be placed in non-inverting or inverting signal-conditioning configurations, subject to the stability, input-range, and output-swing limitations described by the manufacturer datasheet. Its broad supply range permits operation from low-voltage systems or from a 24 V industrial rail when the relevant device and package ratings permit. The dual architecture is useful when a design needs paired gain stages, buffering, or independent channels. Typical applications include current-sense amplifier interfaces, low-side sensor conditioning, industrial control modules, battery-powered instrumentation, and measurement systems referenced near ground. In each case, the ground-sense characteristic can reduce output-swing constraints that would otherwise limit a conventional amplifier at low signal levels. The exact input and output ranges should be checked against the operating voltage before finalizing the signal chain. PCB design should preserve the manufacturer's recommended bypass capacitance and account for the common-mode and output-swing limits of the selected operating point. Input and output routing should be short, with the ground reference returned cleanly to the device ground pin. Breadboard or long-trace layouts can introduce coupling and stability problems that do not appear in compact, well-decoupled production layouts. This page combines the confirmed device identity, electrical characteristics, package information, application guidance, sourcing workflow, and engineering checks for LM2904FJ-E2. It is intended to help engineers determine whether the dual ground-sense topology fits a specific PCB before ordering, while clearly separating confirmed specifications from values that must be confirmed in the manufacturer datasheet.

RFQ پەیوەندی
LM2904FV-E2 - Dual Ground-Sense Op Amp, 3-32V | ROHM
LM2904FV-E2

LM2904FV-E2 - Dual Ground-Sense Op Amp, 3-32V | ROHM

ROHM LM2904FV-E2 is a dual ground-sense operational amplifier designed for low-current consumption and single-supply operation over a 3 V to 32 V range. The device contains two amplifier channels in an 8-pin SSOP-B package and supports input/output common-mode operation close to ground. These characteristics make it suitable for low-side current sensing, battery monitoring, portable instrumentation, and control systems where the measured signal is referenced to ground. A ground-sense operational amplifier is an analog amplifier optimized for signals near the supply-ground rail. In the broader semiconductor hierarchy, an operational amplifier is a linear amplifier IC used to amplify voltage differences, and a ground-sense amplifier adds input and output common-mode characteristics suited to low-side sensing. It can therefore process small signals without requiring a negative supply rail when the input and output remain within the specified common-mode range. The LM2904FV-E2 provides two independent amplifier channels, low current consumption, and a wide operating supply range. Its ground-sense architecture supports signal acquisition in circuits where one input is close to 0 V and the other input represents a small voltage change. The 8-pin SSOP-B format also provides a compact surface-mount option for industrial and consumer control equipment. ROHM identifies the LM2904FV family as not recommended for new designs, so the device is primarily appropriate for maintenance, repair, and continuation of an established design. Internally, the dual amplifier combines two standard operational-amplifier channels with ground-sense capability and a common supply architecture. The two channels can amplify related measurements, such as two halves of a differential signal, or operate independently when each channel has its own feedback network. The wide 3 V to 32 V supply span permits use from low-voltage battery-powered systems through industrial control rails without requiring a separate low-voltage regulator for the amplifier itself. Typical uses include low-side shunt-current measurement, battery-voltage monitoring, sensor-interface circuits, industrial process controls, and portable test equipment. In a low-side current-sense design, the shunt produces a small voltage proportional to current; the amplifier boosts that differential signal while its ground-sense behavior supports operation near the lower rail. The dual configuration can also provide signal conditioning for paired sensors or implement two independent gain stages. Designers should verify the exact input and output common-mode limits, output-current capability, input-bias current, offset voltage, and noise specifications against the manufacturer datasheet before fixing gain or bias networks. Input bias-current error can be significant when sensing very low-resistance shunts, so resistor values should be selected to balance bias error against bandwidth and stability. Decoupling capacitors should be placed close to the supply pins, and the unused channel should be configured according to the datasheet rather than left floating. This product page combines the manufacturer lifecycle status with package, voltage, and application information, while also providing procurement guidance, comparison structure, and practical engineering notes. Those additions help engineers evaluate whether the established LM2904FV-E2 fits a legacy or maintenance design and what electrical and PCB checks are required before substitution.

RFQ پەیوەندی
LM2904FVJ-E2 - Dual 3-32V Ground-Sense Op Amp | ROHM
LM2904FVJ-E2

LM2904FVJ-E2 - Dual 3-32V Ground-Sense Op Amp | ROHM

The ROHM Semiconductor LM2904FVJ-E2 is a dual ground-sense operational amplifier designed for two independent amplifier channels, a 3 V to 32 V single-supply operating range, and an 8-pin TSSOP-BJ package. Its input and output common-mode range extends to ground, making it suitable for low-side sensing and signal-conditioning systems whose signals remain close to the negative supply rail. A ground-sense operational amplifier is a voltage-feedback amplifier intended to amplify or buffer signals near 0 V without requiring a dual supply. The LM2904FVJ belongs to the broader operational-amplifier hierarchy: voltage-feedback amplifier, analog signal-conditioning IC, and semiconductor. Its rail-to-rail input-and-output ground-sense capability is especially useful in battery-powered monitoring, industrial sensing, and portable equipment where the signal may approach the lower supply limit. The device provides two amplifier channels in one package, reducing board area compared with two separate single amplifiers. Its wide 3 V to 32 V operating range accommodates low-voltage systems as well as higher-voltage industrial supplies. The manufacturer describes low current consumption and ground-sense operation as principal characteristics. Because both channels share one package, designers must also evaluate common supply impedance, thermal behavior, output-current sharing between independent loads, and the maximum load conditions of each amplifier. The LM2904FVJ-E2 is categorized as a standard general-purpose amplifier, but its ground-sense architecture is important in applications where the measured voltage can approach 0 V. Unlike a conventional rail-to-rail amplifier selected only by input common-mode limits, this device specifically addresses ground-referenced input and output operation. The TSSOP-BJ package offers a compact surface-mount format, although careful pin placement and decoupling remain necessary to minimize noise and ground-offset errors. Typical uses include low-side current detection, battery monitoring, portable instrumentation, industrial transducers, sensor interfaces, and low-voltage control systems. In a current-sense application, the amplifier can sit on the low side of a shunt, preserving a ground-centered measurement signal while reducing the voltage burden imposed on the measured circuit. In sensor systems, the close-to-ground input capability reduces the need for an additional offsetting supply. Design around the manufacturer pinout and place input, output, and decoupling connections to minimize parasitic resistance in the feedback network. Maintain short ground-return paths and decouple the supply close to the device. Because the manufacturer classifies this product as not recommended for new designs, new production projects should normally use a currently recommended amplifier unless the legacy footprint, supply range, ground-sense behavior, and electrical performance are mandatory. This page combines the exact manufacturer lifecycle position, package and supply information, drop-in alternatives, application guidance, and design cautions for engineers maintaining or replicating an existing LM2904FVJ-E2-based design. It emphasizes practical selection limits rather than treating the legacy part as a universal modern replacement.

RFQ پەیوەندی
LM2904FVM-GTR - Dual Ground-Sense Op Amp | ROHM
LM2904FVM-GTR

LM2904FVM-GTR - Dual Ground-Sense Op Amp | ROHM

The ROHM Semiconductor LM2904FVM-GTR is a dual ground-sense operational amplifier designed for general-purpose signal conditioning. It provides two amplifier channels in an 8-MSOP surface-mount package, operates from a single supply of 3 V to 32 V, and combines a wide input-voltage range with low current consumption. The -GTR ordering code identifies tape-and-reel production handling. An operational amplifier is an analog amplifier IC that uses feedback to amplify the difference between two input voltages. The dual configuration integrates two amplifier channels into one package, reducing board area in designs that need more than one amplification stage. Within the broader semiconductor hierarchy, an operational amplifier belongs to the amplifier IC and linear IC families, where it supports precision control, measurement, buffering, and signal-conditioning functions. The ground-sense architecture is suited to circuits that monitor or condition signals referenced toward ground. The two independent channels can be used separately or together in applications such as current-sense amplifiers, low-side sensing, sensor interfaces, and general feedback-control blocks. The 3 V to 32 V single-supply range permits operation from compact 3 V systems through substantially higher industrial supply rails, provided the complete circuit remains within the device operating limits. Low current consumption makes the LM2904FVM useful in designs where the amplifier must coexist with battery-powered, portable, or broadly distributed sensing circuitry. Its MSOP-8 package supports compact surface-mount assembly, while the dual channel count reduces the number of packages needed compared with two single operational amplifiers. Engineers should still verify output-current demand, input common-mode range, output swing, noise, offset, and stability requirements against the manufacturer datasheet for the intended application. Typical uses include amplifying the voltage across a low-side shunt, conditioning resistive sensor outputs, and providing gain around analog-control loops. The amplifier can also serve as a buffer when its input bias and noise characteristics meet the system requirements. In each circuit, resistor values should establish suitable gain while keeping the operating point within the device input and output ranges. For PCB implementation, place the device close to the signal source and receiver to minimize susceptibility to noise and parasitic loading. Keep high-current switching paths away from input and feedback nodes, provide a stable decoupling capacitor at the supply pins, and route the feedback loop compactly. Confirm stability with the selected gain and output-load configuration rather than assuming that a generic compensation arrangement fits every application. This page organizes the LM2904FVM-GTR for engineers evaluating dual ground-sense amplifier requirements, including its 3 V to 32 V supply range, 8-MSOP format, use cases, sourcing considerations, and the engineering checks needed before committing a PCB footprint. Use the manufacturer product page and datasheet for final electrical, environmental, and ordering validation.

RFQ پەیوەندی
LM2904ITP/NOPB - Dual 26V 700kHz Op Amp | Texas Instruments
LM2904ITP/NOPB

LM2904ITP/NOPB - Dual 26V 700kHz Op Amp | Texas Instruments

The Texas Instruments LM2904ITP/NOPB is a dual, general-purpose operational amplifier with a 26 V maximum supply voltage and a 700 kHz rated operating bandwidth, supplied in an 8-DSBGA package. The ordering suffix identifies the tape-and-reel configuration. Its two amplifier circuits, 1 MHz gain-bandwidth product and 0.1 V/us slew rate place it in the classic low-power, general-purpose operational-amplifier category. An operational amplifier, or op amp, is a voltage-controlled differential amplifier intended to amplify the difference between two input voltages. It belongs to the amplifier IC hierarchy, within the broader semiconductor and analog signal-processing categories. A dual op amp combines two amplifier channels in one package, allowing a circuit to implement two signal-processing functions while reducing board area and the number of external components. The LM2904ITP/NOPB is identified as a standard general-purpose amplifier. The listed electrical characteristics include a 26 V maximum supply voltage, 700 kHz operating bandwidth, 1 MHz gain-bandwidth product and 0.1 V/us slew rate. These values position the device for moderate-frequency signal handling rather than high-speed precision work. The 8-DSBGA package also gives PCB designers a compact option for dual-channel analog circuits. The device belongs to the long-established LM2904 family and is associated with the LM158-series operating-amplifier architecture, consisting of two independent, high-gain, internally frequency-compensated amplifiers designed for single-supply operation over a wide voltage range. Internal frequency compensation removes the need for an external dominant-pole capacitor in typical closed-loop configurations, simplifying implementation and stabilizing operation across supported gain settings. Typical uses include low-frequency sensor conditioning, audio preamplification, instrumentation, active filtering, and general dual-amplifier analog signal chains. The dual-channel configuration is particularly useful when a design needs symmetric gain stages, a voltage follower alongside a signal amplifier, or two related sensor interfaces sharing one compact package. Designers should verify the exact input common-mode range, output swing, input offset, input-bias current, supply-current behavior and temperature limits against the manufacturer datasheet before finalizing a circuit. Place the 8-DSBGA on a PCB layout that separates input, output and supply paths appropriately, and use suitable bypassing capacitance at the power pins. Because the package is a fine-pitch BGA rather than a leaded package, assembly capability and land-pattern compatibility also require verification. This product page organizes the confirmed ordering, package, electrical, and commercial information while distinguishing documented LM2904-family options from unconfirmed substitutions. It also provides application guidance, comparison fields, and a pinout limitation notice so engineers can make a package-aware sourcing decision without assuming that every electrically similar dual op amp is a true drop-in replacement.

RFQ پەیوەندی
LM2904ITPX/NOPB - Dual 26V, 700kHz Op Amp | Texas Instruments
LM2904ITPX/NOPB

LM2904ITPX/NOPB - Dual 26V, 700kHz Op Amp | Texas Instruments

Texas Instruments LM2904ITPX/NOPB is a dual, general-purpose operational amplifier with two independent, internally frequency-compensated amplifiers, a maximum supply rating of 26 V, and a gain-bandwidth product of 700 kHz. The device is supplied in an 8-DSBGA package and is intended for single-supply operation across a broad voltage range. An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the voltage difference between its differential inputs. Its high open-loop gain, negative feedback operation, and internal frequency compensation make it useful for signal conditioning, comparison, filtering, and instrumentation. The LM2904 contains two amplifier channels in one package, allowing one IC to serve two related analog functions. The LM2904ITPX/NOPB provides two amplifier circuits in a compact 8-DSBGA package. Texas Instruments describes the device as a low-power dual operational amplifier with a 700 kHz gain-bandwidth product. A listing for the exact MPN also identifies a 0.1 V/µs slew rate, surface-mount construction, and a -40°C to 85°C temperature range. Tape-and-reel packaging supports automated assembly and high-volume production. Internally frequency compensation means each amplifier can operate with a minimum closed-loop gain determined by its internal design rather than requiring an external compensation network in ordinary applications. This characteristic simplifies analog circuit implementation, although the closed-loop gain, output swing, stability, and supply headroom still require verification against the operating conditions of the final circuit. Typical uses for the LM2904ITPX/NOPB include industrial sensor conditioning, instrumentation, low-frequency active filtering, analog signal buffering, and general-purpose dual-amplifier circuits. The 26 V maximum supply rating is useful for industrial and automotive-adjacent designs that operate above conventional 5 V analog rails, provided the applied voltage remains within the device rating and suitable input and output common-mode conditions are maintained. For PCB design, place decoupling capacitors close to the supply and ground connections, preserve the package footprint and pin assignments, and verify thermal performance when both channels operate continuously. Decoupling and stability depend on the source impedance, load, feedback network, and supply arrangement, so prototype the final filter or amplifier configuration before high-volume production. This product page combines the exact-orderable MPN, electrical attributes, package information, application guidance, and practical design considerations. It also distinguishes documented drop-in alternatives from functional equivalents that require different footprints, helping engineers avoid substitutions that cannot be mounted safely on the original PCB land pattern.

RFQ پەیوەندی
LM2904LVIDDFR - 5.5V Dual 1MHz Op Amp | Texas Instruments
LM2904LVIDDFR

LM2904LVIDDFR - 5.5V Dual 1MHz Op Amp | Texas Instruments

The Texas Instruments LM2904LVIDDFR is a dual, low-voltage operational amplifier with a 5.5 V maximum supply voltage, 1 MHz gain-bandwidth product, and 3 mV output offset voltage, housed in an 8-pin TSOT-23 package. Each amplifier channel provides independent input, output, power, and feedback connections, allowing one package to implement two signal-processing functions. An operational amplifier is an analog amplifier whose high open-loop gain is controlled by external feedback components. Within the power-management semiconductor hierarchy, the LM2904LV belongs to the broader operational-amplifier family, combining low-voltage compatibility, low power consumption, and general-purpose signal conditioning in one dual-channel device. The LM2904LV family is intended for portable equipment, industrial controls, sensors, communications, and other low-voltage systems. Key characteristics include a 2.7 V to 5.5 V supply range, approximately 90 uA supply current, a typical slew rate of 0.5 V/us, and rail-to-rail output swing. The 1 MHz gain-bandwidth product supports moderate-frequency amplification, while the 3 mV offset-voltage figure defines the typical input imbalance that must be considered when operating near the output range limits. These characteristics make the device suitable for battery-powered instrumentation and general-purpose analog front ends. The dual architecture reduces component count and board area compared with two separate single-channel amplifiers. Each channel can be configured as an inverting amplifier, a non-inverting amplifier, a comparator-like comparator configuration, or an analog buffer when operated with suitable feedback and loading. Independent channel use provides flexibility, although common-mode and output-swing limitations still apply to both channels. Typical uses include current-sense amplifier front ends, sensor signal conditioning, low-frequency active filters, audio preamplification, industrial interface circuits, and portable measurement equipment. In current sensing, the device can amplify the small voltage developed across a low-value shunt resistor. In sensor interfaces, it can provide gain or impedance conversion before an ADC input. Its low 90 uA supply-current characteristic is particularly useful in battery-operated equipment. When designing around the LM2904LVIDDFR, verify the input common-mode range and output swing against the actual signal amplitude. Keep feedback-loop routing compact, provide local supply bypassing, and avoid placing the input node beside high-current switching paths. Check the 5.5 V maximum supply rating and ensure the 2.7 V lower operating limit is sufficient for the complete system supply range. This product page consolidates the manufacturer specifications, package information, practical application guidance, and verified substitution assessment for the LM2904LVIDDFR. It also distinguishes confirmed drop-in candidates from devices that require a package or functional change, helping engineers evaluate replacements without changing PCB requirements.

RFQ پەیوەندی
LM2904LVIDGKR - Dual 5.5V 1MHz Op Amp | Texas Instruments
LM2904LVIDGKR

LM2904LVIDGKR - Dual 5.5V 1MHz Op Amp | Texas Instruments

The Texas Instruments LM2904LVIDGKR is a dual, low-voltage operational amplifier designed for single-supply or dual-supply industrial and instrumentation circuits. It provides two amplifier channels, a 1 MHz gain-bandwidth product, a 3 mV maximum input offset voltage, and operation from a single 2.7 V to 5.5 V supply in an 8-pin VSSOP (DGK) package. The part is intended for general-purpose signal conditioning where low supply voltage, modest bandwidth, and short-circuit tolerance are more important than high-speed performance. An operational amplifier is an analog integrated circuit that amplifies the difference between its inverting and non-inverting inputs. Within the broader hierarchy, the LM2904LV is a voltage-feedback operational amplifier, which places it in the amplifier IC and analog signal-conditioning categories. Two independent channels allow one package to implement two amplifiers, reducing component count and simplifying board layout in designs such as sensor conditioning, active filtering, and low-frequency instrumentation. Key features include the dual-channel configuration, 1 MHz gain-bandwidth product, 3 mV input offset voltage rating, and a maximum 5.5 V supply voltage. The low-voltage LM2904LV family is intended for portable and low-voltage systems where the conventional 26 V LM2904 would be excessive. Its general-purpose positioning also makes it useful as a cost-conscious alternative to higher-performance precision amplifiers when the signal bandwidth and offset requirements are moderate. The device uses a conventional complementary-input architecture suitable for closed-loop voltage feedback. Because its unity-gain bandwidth is 1 MHz, applications are generally limited to low-frequency amplification and filtering rather than high-speed signal chains. Input and output stability depends on the surrounding feedback network, source impedance, load, and bypass capacitance, so the manufacturer datasheet should be used when selecting compensation and decoupling values. Typical uses include sensor-amplifier front ends, transducer signal conditioning, active low-pass filters, audio preamplifier stages, buffer stages, and general dual-amplifier analog boards. The low-voltage supply range makes the device appropriate for 3.3 V and 5 V systems, although rail-to-rail input and output capability is not implied by the 5.5 V maximum supply specification. The primary design consideration is supply headroom. Common-mode input voltage, output swing, and output-current capability all depend on the selected supply voltage and load. Verify those limits against the application before committing to the VSSOP footprint. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer datasheet rather than left floating. This page consolidates the device specifications, ordering information, package details, application guidance, and engineering trade-offs into one reference for component selection and PCB design.

RFQ پەیوەندی
LM2904LVIDR - 1MHz Dual Low-Voltage Op Amp | Texas Instruments
LM2904LVIDR

LM2904LVIDR - 1MHz Dual Low-Voltage Op Amp | Texas Instruments

The Texas Instruments LM2904LVIDR is a dual, low-voltage, general-purpose operational amplifier with a 5.5 V maximum supply rating, 1 MHz gain-bandwidth product, and 3 mV input offset voltage. It is supplied in an 8-pin SOIC package and is designed for cost-sensitive signal-conditioning and analog-instrumentation applications. An operational amplifier, or op amp, is an analog integrated circuit that amplifies the difference between two input voltages. The LM2904LVIDR contains two amplifiers in one package, making it useful for dual-channel signal chains, buffer stages, transducers, and low-voltage control systems. Its family position is operational amplifier -> voltage-feedback amplifier -> analog amplifier -> integrated circuit. The device is specified for dual operation at a 5.5 V maximum supply. Texas Instruments describes the LM2904LV as a dual, 5.5 V, 1 MHz operational amplifier with a 3 mV offset-voltage rating. The 8-SOIC package supports conventional surface-mount assembly, while the dual configuration reduces board area for applications that need two amplifier channels. The LM2904LVIDR is intended for instrumentation and general-purpose analog designs where a low-voltage supply is important. Typical uses include sensor-interface amplification, audio signal conditioning, process-control loops, and buffering of low-level analog signals. The 1 MHz bandwidth is suitable for moderate-frequency rather than high-speed precision applications, and the 3 mV input offset specification should be considered in sensor and instrumentation designs requiring low input-level accuracy. For stable operation, follow the manufacturer's recommended supply, common-mode input, output-voltage, and decoupling guidelines from the LM2904LV datasheet. Place the supply bypass capacitor close to the device and keep sensitive input routing short to reduce noise pickup. The two amplifier channels in the package are independent, but each requires correct biasing and appropriate output-load conditions. This product summary combines the LM2904LV family specifications with practical guidance for PCB layout, application selection, and replacement planning. It is designed to help engineers identify whether the 8-SOIC dual op amp meets the voltage, bandwidth, offset, and package requirements of a new analog design.

RFQ پەیوەندی
LM2904LVIPWR - Dual 5.5V 1MHz Op Amp | Texas Instruments
LM2904LVIPWR

LM2904LVIPWR - Dual 5.5V 1MHz Op Amp | Texas Instruments

Texas Instruments LM2904LVIPWR is a dual, general-purpose operational amplifier with a 5.5 V maximum supply rating, 1 MHz gain-bandwidth product, and 3 mV input offset voltage in an 8-pin TSSOP (PW) package. The two amplifiers are intended for low-voltage signal-conditioning and analog-processing systems operating from -40°C to +125°C. An operational amplifier is an active analog component that amplifies the voltage difference between its non-inverting and inverting inputs. The LM2904LV belongs to the LM290xLV low-voltage operational-amplifier family, combining two amplifier channels in one package. This makes the device suitable for applications such as signal buffering, active filtering, differential amplification, instrumentation, and low-level analog conditioning. The headline specifications are a 1 MHz gain-bandwidth product, a 3 mV offset voltage, and a 5.5 V maximum supply rating. These characteristics are useful for moderate-bandwidth, general-purpose analog designs where compactness and dual-channel functionality matter more than high-speed precision performance. The operating-temperature range of -40°C to +125°C supports use across industrial and extended-temperature equipment. The LM2904LV uses conventional internal compensation and is configured as a dual operational amplifier. Its 1 MHz bandwidth supports general-purpose closed-loop signal work, while the two channels can implement independent amplifier functions or work together in differential, summing, and feedback configurations. Design calculations should use the manufacturer datasheet for gain-bandwidth behavior, output swing, input common-mode limits, and output-drive capability. Typical uses include sensor-signal conditioning, audio preamplification, industrial control interfaces, low-frequency active filters, and general analog buffers. In dual-rail or single-supply systems, the circuit designer must verify the allowable input and output common-mode ranges against the actual supply voltage. Output loading and feedback-loop stability also require evaluation when driving capacitive or long external cables. Use the manufacturer pin-description table when assigning PCB tracks and verify the exposed-pad requirements and recommended land pattern for the TSSOP package. Place input and feedback components close to the relevant amplifier pins, maintain short ground-return paths, and provide local supply bypassing to reduce noise and prevent feedback from unrelated circuitry. This product page combines the key manufacturer specifications, ordering and package information, application guidance, and replacement-selection considerations in one engineering-focused reference. The comparison and design notes are intended to accelerate schematic selection, footprint verification, and first-board bring-up for dual low-voltage operational-amplifier designs.

RFQ پەیوەندی
LM2904LVQDGKRQ1 - 5.5V 1MHz Automotive Dual Op Amp | Texas Instruments
LM2904LVQDGKRQ1

LM2904LVQDGKRQ1 - 5.5V 1MHz Automotive Dual Op Amp | Texas Instruments

Texas Instruments LM2904LVQDGKRQ1 is an automotive-grade, dual operational amplifier designed for low-voltage signal-chain systems. It operates from a 2.7 V to 5.5 V supply, provides a 1 MHz gain-bandwidth product, and is specified with a 3 mV input offset voltage. The device is supplied in an 8-VSSOP package and provides two amplifier circuits in one package. An operational amplifier is an analog integrated circuit that uses high-gain differential amplification to compare an inverting input with a non-inverting input. Within the broader hierarchy, it is a voltage-feedback amplifier, an amplifier IC, and a signal-conditioning semiconductor. The dual configuration allows one device to process two related channels, reducing board area when both channels share the same supply and ground reference. The LM2904LV-Q1 family targets automotive and industrial low-voltage applications where supply efficiency, cost, and dependable operation are important. The 2.7 V to 5.5 V operating range supports systems powered from regulated 3.3 V and 5 V rails. Its 1 MHz bandwidth makes it suitable for general-purpose amplification, buffering, voltage comparison, filtering, and sensor-interface functions rather than high-speed signal processing. The dual amplifier architecture is useful in sensor conditioning, current sensing, control loops, line-driver buffers, and automotive body electronics. Each amplifier can be used independently, allowing the two channels to monitor complementary signals or perform separate functions in a compact circuit. Input and output stability, common-mode range, and output-drive capability should be checked against the actual signal levels and load conditions. The principal design trade-off is that this is a general-purpose, low-voltage amplifier rather than a precision or high-speed device. Its 3 mV offset specification is appropriate for many sensing and control paths, but systems requiring tighter offset accuracy need to evaluate the bias current, input voltage range, noise, and application error budget. This page combines the manufacturer specifications, package information, application guidance, comparison parameters, and practical drop-in selection notes for engineers evaluating the LM2904LVQDGKRQ1.

RFQ پەیوەندی
LM2904LVQDRQ1 - 5.5V Dual 1MHz Op Amp | Texas Instruments
LM2904LVQDRQ1

LM2904LVQDRQ1 - 5.5V Dual 1MHz Op Amp | Texas Instruments

Texas Instruments LM2904LVQDRQ1 is an automotive-grade, dual operational amplifier with a 5.5 V maximum supply, 1 MHz gain-bandwidth product, and 3 mV output offset voltage in an 8-pin SOIC package. The two independent channels make it suitable for signal conditioning, transducer amplification, feedback control, and automotive electronics operating from 2.7 V to 5.5 V. An operational amplifier, or op amp, is a voltage-feedback amplifier used to increase signal amplitude, buffer inputs, implement active filters, and regulate feedback loops. Within the semiconductor hierarchy, the LM2904LV-Q1 belongs to the operational-amplifier, analog-amplifier, and signal-conditioning IC categories. Its low-voltage supply operation distinguishes it from conventional high-voltage LM2904 devices while retaining the familiar dual-channel pin arrangement. The LM2904LV-Q1 family is specified for low-voltage operation from 2.7 V to 5.5 V. Its 1 MHz gain-bandwidth product supports general-purpose closed-loop amplification at relatively low frequencies. The 3 mV offset specification improves DC accuracy in applications where input bias and offset errors influence the output. Two amplifiers are integrated in one 8-pin SOIC, reducing board area while providing independent channels for complementary signal paths. This device is intended for cost-sensitive, low-voltage systems that still require automotive-grade temperature qualification and robust general-purpose performance. The dual configuration can implement two noninverting amplifiers, two voltage followers, differential signal conditioning, or independent error-amplifier functions. Because it is not rail-to-rail, input and output common-mode ranges must remain within the device's specified operating limits when supplies are restricted. Typical uses include automotive sensor interfaces, body and comfort-system signal conditioning, low-voltage control loops, current sensing with external resistors, active filters, and general industrial modules operating from 2.7 V or 3.3 V rails. A 5 V system can use the full 5.5 V maximum supply while retaining appropriate design margin for supply variation and transient behavior. When laying out the circuit, keep input and feedback traces short, provide local supply bypassing, and avoid placing long routes beside high-current switching nodes. Check the common-mode input range at the actual signal amplitude and ensure that output swing remains below the output-current and supply-voltage limits. Decoupling capacitors should connect directly to the supply and ground pins rather than through shared narrow traces. This product page combines the manufacturer specifications with practical design guidance, package-level comparisons, application examples, and available drop-in alternatives. It supports faster component selection for engineers who need a dual, low-voltage, automotive operational amplifier in the standard 8-pin SOIC footprint.

RFQ پەیوەندی
LM2904M - Dual 26V 700kHz Op Amp | Texas Instruments
LM2904M

LM2904M - Dual 26V 700kHz Op Amp | Texas Instruments

The Texas Instruments LM2904M is a dual, general-purpose operational amplifier with a 26 V supply rating, 700 kHz gain-bandwidth product, and an 8-SOIC package. According to the Texas Instruments LM2904 product page, the device is intended for low-power analog signal-processing systems where two amplifiers are useful in a single package. The verified distributor listing identifies LM2904M as a standard two-circuit amplifier in an 8-SOIC package, and the Mouser result specifies the operating-temperature range as -40 °C to 85 °C. An operational amplifier is an analog integrated circuit that uses feedback to amplify the difference between its non-inverting and inverting inputs. The LM2904M belongs to the broader operational-amplifier, analog-amplifier, and semiconductor hierarchies. In practical circuits, each internal amplifier can serve as an inverting amplifier, non-inverting amplifier, comparator, buffer, or integrator when operated with suitable external components and supply voltages. The 26 V supply rating provides compatibility with conventional industrial and analog signal ranges, while the 700 kHz gain-bandwidth product supports low-to-moderate-frequency signal amplification. The dual configuration reduces package count when a circuit needs two amplifier channels. Its general-purpose designation indicates broad applicability rather than a specialized low-noise, high-speed, precision, or automotive-only function. The LM2904M uses an 8-SOIC surface-mount package, corresponding to the soic-8 package library key. The verified results do not provide a complete electrical specification table in the supplied excerpts, so detailed parameters such as input offset voltage, input bias current, slew rate, output-current capability, common-mode range, quiescent current, and noise values are marked as data needed rather than estimated. Typical applications include low-frequency analog signal conditioning, instrumentation interfaces, sensor buffers, audio preamplifier stages, and general dual-amplifier circuits. The dual channel can also be used for active filtering or control loops where two matched functional amplifier sections are useful. Because the available information is general-purpose and distributor-oriented, the designer should verify operating-point limits, loading, stability, and temperature margin against the manufacturer datasheet before release. For PCB implementation, place bypass capacitors close to the supply pins and route sensitive input and feedback traces away from switching nodes and high-current paths. Confirm the exact pin orientation and electrical limits before assembly. This page combines verified manufacturer and distributor references with explicitly marked data gaps rather than inventing missing specifications.

RFQ پەیوەندی
LM2904M-FS - Dual 26V Op Amp 500V/ms | onsemi
LM2904M-FS

LM2904M-FS - Dual 26V Op Amp 500V/ms | onsemi

The onsemi LM2904M-FS is a dual general-purpose operational amplifier in an 8-pin SOIC package, with two independent internally frequency-compensated amplifier channels designed for operation from a single power supply. Key characteristics include a 250 nA input-bias current, 500 V/ms slew rate, and approximately 2 mV input offset voltage for the listed configuration. An operational amplifier is an analog signal-conditioning IC that compares an inverting input with a non-inverting input and amplifies the voltage difference between them. The dual-amplifier configuration places two independent amplifiers in one package, making the LM2904M-FS suitable for signal conditioning, feedback-control loops, sensor amplification, and general analog signal paths. Within the product hierarchy, it is a dual operational amplifier within the amplifier-IC and analog-semiconductor categories. The LM2904M-FS combines a 26 V maximum supply capability from the LM2904 family with low input-bias current and a 500 V/ms slew rate. Its internally compensated architecture removes the need for an external frequency-compensation network in common closed-loop applications. The two independent channels can operate in non-inverting, inverting, voltage-follower, comparator-style, and feedback configurations, provided the design respects the device's common-mode and output-voltage limits. The 8-SOIC footprint provides a conventional surface-mount assembly format with exposed leads on both package sides. Each half of the amplifier uses four pins: two inputs, one output, and the power connection. The standard SOIC-8 pin arrangement simplifies PCB layout, but normal single-supply operation requires bypassing the positive supply pin to ground and accounting for the input and output common-mode limitations near the supply rails. Typical applications include low-frequency industrial instrumentation, buffered sensor interfaces, audio preamplifier stages, analog monitoring, and general-purpose dual-amplifier signal conditioning. The LM2904M-FS is particularly useful where two related analog channels are required on one board, such as an input stage and feedback amplifier in a control circuit. For high-speed or very low-offset instrumentation, a precision amplifier family may be preferable. Decouple the power supply with a short, low-inductance path from the positive supply pin to ground, and route the amplifier output away from high-current switching nodes. Avoid using the device outside its input common-mode range, especially in single-supply circuits where the input approaches ground. Stable feedback-network layout and adequate output-load capability should be verified for every analog channel. This product page combines the exact LM2904M-FS ordering information with family-level electrical characteristics, a complete SOIC-8 pin map, practical application guidance, and a qualified drop-in comparison. It is designed to help engineers identify the correct footprint, understand the device's analog signal-conditioning role, and select among documented alternatives without changing the PCB land pattern.

RFQ پەیوەندی
LM2904M/NOPB - Dual 26V 700kHz Op Amp | Texas Instruments
LM2904M/NOPB

LM2904M/NOPB - Dual 26V 700kHz Op Amp | Texas Instruments

Texas Instruments LM2904M/NOPB is a dual, low-power, high-gain operational amplifier rated for a 26 V supply and a 700 kHz gain-bandwidth product. The device is supplied in an 8-pin SOIC package and provides two independent, internally frequency-compensated amplifiers. It is designed for operation from a single power supply over a wide voltage range, while split-supply operation is also supported. The LM2904 family targets general-purpose analog signal conditioning where low power consumption, wide supply-voltage tolerance, and conventional dual-amplifier pin arrangements are important. An operational amplifier is an analog signal-processing IC that uses high open-loop gain to amplify differences between voltages applied to its inverting and non-inverting inputs. A dual operational amplifier contains two amplifier sections in one package, reducing board area and simplifying designs that require two independent gain stages. Within the broader semiconductor hierarchy, the LM2904 is an amplifier IC, then an operational amplifier, and finally a general-purpose analog building block for instrumentation, control, and signal-conditioning systems. Key characteristics include a 26 V maximum supply rating, a 700 kHz gain-bandwidth product, low-power operation, internally compensated frequency response, and operation across single- and split-supply arrangements. These features make the LM2904M/NOPB appropriate for transducers, low-frequency analog filters, sensor amplifiers, and general feedback-control circuits. The manufacturer describes the device as a dual low-power, high-gain operational amplifier specifically designed for single-supply operation over a wide range of voltages. Internally, each amplifier section uses frequency compensation to provide stable closed-loop operation without requiring an external compensation network. The two sections are independent, allowing them to serve separate signal paths or to work together as stages within a larger analog circuit. The 700 kHz gain-bandwidth product favors low-frequency rather than high-speed signal applications, while the 26 V supply rating provides useful headroom for industrial and automotive-style supply environments when the complete circuit satisfies the device ratings. Typical uses include amplifying outputs from sensors, buffering potentiometer and resistive-divider signals, implementing active low-pass or high-pass filters, and closing loops around slow analog control systems. Two amplifiers in one 8-pin SOIC can also form instrumentation-style signal-conditioning chains when the required common-mode range, output swing, and noise performance match the application. For PCB design, verify the exact pin orientation and exposed or non-exposed package details against the manufacturer pin configuration before routing copper. Place input and feedback components close to the relevant amplifier pins, maintain short ground-return paths, and use a stable local supply-decoupling arrangement. Avoid designs requiring the high slew rate and wide bandwidth of precision or high-speed amplifiers; the LM2904 is better suited to economical, general-purpose low-frequency analog functions. This product page consolidates the manufacturer family specifications, verified distributor identification, same-footprint alternatives, application guidance, and practical design considerations. It supports faster part identification while keeping datasheet verification, footprint review, and application-specific validation at the center of every engineering decision.

RFQ پەیوەندی
LM2904M8-13 - Dual 700 kHz Op Amp | Diodes Incorporated
LM2904M8-13

LM2904M8-13 - Dual 700 kHz Op Amp | Diodes Incorporated

The Diodes Incorporated LM2904M8-13 is a dual general-purpose operational amplifier with two independent amplifier channels, a 700 kHz gain-bandwidth product, 2 mV input offset voltage, and an 8-MSOP package. It operates from a single supply between 3 V and 36 V, while split-supply operation is also supported. The device is characterized for industrial temperatures from -40°C to +125°C and uses green mold compound as standard. An operational amplifier is an analog signal-conditioning IC that amplifies the voltage difference between its inverting and non-inverting inputs. Operational amplifiers belong to the amplifier IC hierarchy and are widely used in sensor interfaces, filters, comparators, feedback-control loops, and low-frequency signal-processing circuits. The LM2904 combines two operational amplifiers in one compact surface-mount package, reducing board area compared with separate single-channel devices. Each LM2904 channel provides high open-loop gain and a 700 kHz gain-bandwidth product. The 2 mV input offset rating helps limit output error in DC amplifier and comparator circuits. Single-supply operation from 3 V to 36 V makes the device suitable for industrial control, instrumentation, sensor-conditioning, and power-supply feedback applications. Its -40°C to +125°C characterization also supports designs operating across extended temperature ranges. The LM2904 architecture supports both single-supply and split-supply operation. In a single-supply circuit, the input common-mode range, output swing, and bias arrangement remain important design constraints, particularly when signals remain close to ground. With dual supplies, the two amplifier channels can process signals around ground more naturally, although common-mode and output-range checks remain necessary at the supply limits. Typical uses include transimpedance amplifiers for low-frequency sensor signals, active filters for analog signal conditioning, threshold detectors, and closed-loop control amplifiers. The two channels may also be configured as a comparator, voltage follower, or differential amplifier, depending on the feedback network and system voltage requirements. Its 8-MSOP package is suited to compact industrial and embedded control boards where a dual amplifier offers practical space savings. For reliable layout, place input and feedback components close to their corresponding pins and keep sensitive input traces away from high-current switching paths. The power-supply pins require effective bypassing with a short ground return. Confirm that input and output signal levels remain inside the amplifier's usable common-mode and output ranges, particularly in single-supply configurations where the available signal headroom is reduced. This page combines the manufacturer datasheet, distributor listings, package and pinout information, application guidance, and replacement-selection criteria to support faster engineering evaluation. Review the electrical limits and application circuit in the Diodes Incorporated LM2904/LM2902 datasheet before finalizing a production design.

RFQ پەیوەندی
LM2904MWC - Dual 26V 700kHz Operational Amplifier | Texas Instruments
LM2904MWC

LM2904MWC - Dual 26V 700kHz Operational Amplifier | Texas Instruments

The Texas Instruments LM2904MWC is a dual general-purpose operational amplifier designed for operation from a single power supply up to 26 V, with a gain-bandwidth product of 700 kHz. The device contains two independent amplifier channels and is supplied as a wafer for manufacturing and automated assembly processes. Its primary characteristics are a 26 V maximum supply rating, dual-circuit configuration, and 700 kHz gain-bandwidth product. An operational amplifier is an analog integrated circuit that amplifies the difference between its two input voltages. The LM2904 belongs to the operational-amplifier hierarchy within analog signal-processing ICs, where general-purpose devices are used for buffering, amplification, comparisons, filtering, instrumentation, and control loops. The two channels in the LM2904 can operate independently, allowing one device to implement two analog functions while conserving board area. The 700 kHz gain-bandwidth product makes the LM2904 appropriate for general-purpose signal conditioning rather than high-speed precision signal chains. Its 26 V supply capability is useful in industrial, automotive, and communications equipment where the circuit must tolerate higher supply rails than a conventional low-voltage amplifier. Because it is a general-purpose dual amplifier, designers can use the two channels for functions such as noninverting and inverting gain stages, buffers, active filters, comparators, and sensor-conditioning stages. The LM2904MWC is identified as a wafer sale rather than a finished surface-mount component. Wafer-level procurement is normally used by semiconductor manufacturers, test houses, and automated assembly operations that perform die-level inspection, final test, packaging, and board assembly. In such a process, manufacturing controls, known-good-die requirements, assembly yield, and lot traceability become as important as the electrical characteristics of the amplifier itself. Typical circuit roles include amplifying low-frequency sensor signals, buffering inputs to analog-to-digital converters, implementing active low-pass filters, and driving slow-changing control signals. The dual-channel organization is especially useful when a board requires two similar analog functions, such as an input stage and an output buffer. Decoupling capacitors should be placed close to the device supply pins, while input and output routing should be kept short and away from high-current switching paths. Because LM2904MWC is supplied as a wafer, engineers must confirm the die orientation, pin identification, tested temperature grade, quality level, and packaging flow before committing it to a manufacturing process. The official Texas Instruments LM2904 product page provides the authoritative ordering and technical information, while the manufacturer datasheet defines electrical characteristics, test conditions, and pin functions. This page organizes the confirmed LM2904MWC identity, package format, electrical headline parameters, engineering applications, and verified cross-reference landscape. It also distinguishes a directly replaceable drop-in option from related amplifier families that may require different packages, pin assignments, or performance validation.

RFQ پەیوەندی
LM2904MX - Dual 26V 700kHz Operational Amplifier | TI
LM2904MX

LM2904MX - Dual 26V 700kHz Operational Amplifier | TI

Texas Instruments LM2904MX is a dual, general-purpose operational amplifier designed for operation from a single supply across a wide voltage range. The device contains two independent, internally frequency-compensated amplifiers in an 8-pin SOIC package. According to the manufacturer product page, the LM2904 family supports supply voltages up to 26 V and offers a gain-bandwidth product of 700 kHz. Its internally compensated architecture simplifies stable operation as a unity-gain buffer, while its high open-loop voltage gain and low-power design make it suitable for general signal-conditioning tasks. An operational amplifier is a high-gain analog building block used to amplify voltage differences, buffer inputs, perform comparisons, drive external loads, and implement active filters. Within the broader semiconductor hierarchy, the LM2904MX belongs to the operational-amplifier family, which falls under analog ICs and signal-conditioning semiconductors. Unlike precision or rail-to-rail amplifiers, the LM2904 is intended primarily for conventional supply-based operation and general-purpose applications. The principal features of the LM2904MX include two amplifier channels, an 8-SOIC package, a 700 kHz gain-bandwidth product, and operation from a single supply as high as 26 V. The device is internally frequency compensated, which allows operation at unity gain without an external compensation network. A typical slew rate is 0.3 V/us, making the amplifier appropriate for low-frequency analog processing rather than high-speed signal conditioning. The dual configuration also provides cost and board-area efficiency when a design needs two independent amplifier functions. Each channel can support feedback-based amplifier configurations such as non-inverting amplifiers, inverting amplifiers, voltage followers, summing circuits, and active filters. The LM2904MX is useful when signals must be conditioned with external resistors or capacitors and the application does not require the very low offset, low noise, high speed, or rail-to-rail input and output behavior associated with more specialized amplifier families. Its wide supply-voltage capability also permits operation from industrial-style elevated rails, subject to the device ratings. Typical applications include industrial control and instrumentation, sensor signal conditioning, power-supply feedback monitoring, audio and communications interface circuits, active filtering, and general-purpose analog buffers. In a 24 V industrial system, the 26 V maximum supply rating leaves little margin for transient overshoot, so input protection and rail clamping should be considered. The dual channels can serve separate signal paths, but designers should not assume that the two amplifiers share an output or that short-circuit protection makes unlimited current available. Design attention should focus on the input common-mode range, output swing, output-current capability, stability with the intended load, and the power dissipation created by the supply-to-output voltage difference. Place the device close to feedback and bypass components, use a local supply bypass capacitor, and route high-impedance input nodes with minimal parasitic capacitance. Verify operation across supply voltage, temperature, output load, and source resistance because these conditions affect common-mode range, output swing, and amplifier stability. This page combines manufacturer specifications, package details, drop-in alternatives, application guidance, and design checks to support component selection and PCB implementation. It also highlights the distinctions between the LM2904MX and commonly encountered LM2904 order codes so engineers can confirm electrical behavior, package compatibility, and assembly requirements before approving a replacement.

RFQ پەیوەندی
LM2904MX/NOPB - Dual 26V 700kHz Op Amp | Texas Instruments
LM2904MX/NOPB

LM2904MX/NOPB - Dual 26V 700kHz Op Amp | Texas Instruments

Texas Instruments LM2904MX/NOPB is a dual general-purpose operational amplifier IC designed for low-power signal-conditioning applications. It operates from a supply voltage of up to 26 V, provides a gain-bandwidth product of 700 kHz, and is available in an 8-SOIC package. The two independent amplifier channels make the device suitable for dual-signal processing, instrumentation, control loops, and general analog signal amplification where a low-power, general-purpose amplifier is preferred. An operational amplifier is a voltage-gain amplifier whose closed-loop behavior is determined mainly by external feedback components. The LM2904 belongs to the dual general-purpose operational-amplifier family, combining two amplifier channels in one package. This integration reduces board area compared with two discrete single amplifiers and simplifies dual-channel designs requiring common supply voltage and similar operating characteristics. The manufacturer identifies the LM2904 as a low-power, dual operational-amplifier family for general-purpose applications. Its 26 V maximum supply rating supports higher-voltage analog systems than many low-voltage rail-to-rail amplifiers, while the 700 kHz gain-bandwidth product provides useful bandwidth for control, sensing, buffering, and signal-conditioning tasks. The 8-SOIC package offers a conventional surface-mount footprint that is practical for both new designs and upgrades of existing 8-pin amplifier boards. The MX ordering code denotes the manufacturer's SOIC package option, while /NOPB identifies the lead-free, non-PB-free finish. The 8-SOIC format is useful for prototypes, repair assemblies, and industrial equipment requiring a stable package outline. Designers should consult the manufacturer datasheet for the complete electrical limits, input/output characteristics, supply-current behavior, compensation information, pin assignments, and recommended operating conditions before releasing a production design. Typical LM2904 applications include two-channel sensor amplification, transducer-signal conditioning, low-frequency active filtering, voltage comparison, analog control loops, and general instrumentation. In these applications, the device can amplify signals from sensors, provide gain around analog front ends, or drive feedback networks when the operating range and load capability meet the circuit requirements. The dual channel can also implement differential or complementary stages where the two amplifiers operate within the same supply system. The primary design consideration is ensuring that the input common-mode range, output swing, supply voltage, noise, offset, and stability remain suitable for the application. Bypass capacitors should be placed close to the supply pins, while input, feedback, and compensation components should be positioned to minimize parasitic capacitance and unwanted feedback. Because the package exposes both amplifier channels, grounding and return-current paths should be planned to avoid coupling between the two signal paths. This product record combines the manufacturer specifications with package details, application-oriented guidance, technical comparison criteria, and verified sourcing references. It also distinguishes genuine same-footprint alternatives from broader functional equivalents, helping engineers make a board-level replacement decision while recognizing that electrical equivalence must be confirmed against the complete manufacturer datasheet.

RFQ پەیوەندی
LM2904N - Dual 1 MHz 26 V Op Amp | Texas Instruments
LM2904N

LM2904N - Dual 1 MHz 26 V Op Amp | Texas Instruments

Texas Instruments LM2904N is a dual, internally frequency-compensated operational amplifier with two independent amplifiers, a 26 V maximum supply designation, and a 1 MHz gain-bandwidth product. It is supplied in an 8-pin PDIP package. The device is designed for general-purpose signal conditioning from industrial control to audio and sensor interfaces. An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. Internally compensated LM2904N amplifiers are voltage-amplifier building blocks within the operational-amplifier, analog IC, and semiconductor hierarchies. Their differential inputs support filtering, buffering, summing, comparison, and feedback-control functions without requiring an external compensation network. The verified product information identifies two amplifiers, single-supply or split-supply use, low power drain, and a common-mode input range extending to ground or VEE. Its internally frequency-compensated architecture simplifies closed-loop design, while the dual configuration places two matched-function amplifiers in one package. However, the supplied data does not state output-current capability, input-offset voltage, input-bias current, slew rate, noise density, or operating-temperature limits. A key design consideration is supply configuration. Although the official TI product-page snippet specifies a 26 V product family designation, engineers must consult the exact manufacturer datasheet before setting rail voltage, input common-mode limits, output swing, and load current. Decoupling capacitance, input impedance, feedback topology, output loading, and thermal dissipation also remain datasheet- and layout-dependent. Typical uses include two-channel sensor conditioning, low-frequency active filters, audio preamplification, comparator-style signal detection with suitable saturation limits, control-loop buffering, and general dual-rail analog signal processing. The 1 MHz bandwidth is most appropriate for low-to-moderate-frequency signals rather than high-speed precision instrumentation. This data page combines verified manufacturer and distributor facts, pin-compatible replacement screening, and practical engineering guidance. It deliberately leaves unverified electrical values marked for completion rather than inferring specifications from related dual-amplifier families.

RFQ پەیوەندی
LM2904N/NOPB Dual 1 MHz Op Amp 26 V | Texas Instruments
LM2904N/NOPB

LM2904N/NOPB Dual 1 MHz Op Amp 26 V | Texas Instruments

Texas Instruments LM2904N/NOPB is a dual, general-purpose operational amplifier with two independent amplifiers, a 26 V maximum supply rating, and 1 MHz gain-bandwidth performance in an 8-pin PDIP package. It is designed for single-supply operation across a broad voltage range, with split-supply operation also possible. The device provides internal frequency compensation and low supply-current drain, making it suitable for industrial control, instrumentation, sensor conditioning, and general analog signal-processing systems. An operational amplifier is an amplifier IC that uses high open-loop gain to increase the voltage difference between its differential inputs. In the feedback-defined signal chain, the LM2904N/NOPB belongs to the broader hierarchy of operational amplifier, analog amplifier, amplifier IC, and semiconductor. Its two independent channels allow two separate signal paths in one package, reducing board area compared with two single-amplifier packages. Key features include two amplifier circuits, a 26 V supply-voltage rating, 1 MHz gain-bandwidth, internal frequency compensation, and operation from a single supply or split supplies. The internal compensation removes the need for an external compensation network in ordinary closed-loop configurations. The dual-channel architecture is useful for two-stage filters, differential signal handling, buffer stages, and paired feedback networks. The 8-pin PDIP format supports through-hole assembly and prototyping systems. The LM2904-N family is intended for general-purpose applications where a single-supply-friendly amplifier with a wide supply range is more important than rail-to-rail output swing or very high bandwidth. The device can be used as an inverting amplifier, non-inverting amplifier, voltage follower, comparator in suitable applications, or the active element in a filter. Its internally compensated architecture simplifies design, although users should account for input common-mode limitations, output swing, stability margin, and slew-rate limits when selecting feedback values. Typical applications include low-frequency sensor interfaces, transducer signal conditioning, process-control loops, audio preamplifier stages, data-acquisition systems, and general power-control circuitry. Two amplifiers in one package are especially useful in dual-channel analog boards, instrumentation amplifiers using several gain stages, and active filter designs. The 1 MHz bandwidth supports many low- and mid-frequency industrial signals rather than high-speed video or RF tasks. For PCB design, use the manufacturer's pin-description table and package drawing when assigning connections. Keep input and feedback traces short, provide adequate supply bypassing, and avoid placing high-impedance input nodes next to switching nodes. If the source impedance is high, add a bias resistor or buffer stage to reduce input bias-current effects and offset error. Check the operating region against the device's supply and common-mode limits. This product page combines the LM2904N/NOPB ordering information with package, pinout, application, and drop-in replacement guidance. The comparison table highlights verified package and functional differences, while the design notes focus on practical PCB and signal-chain decisions for engineers evaluating the LM2904N/NOPB.

RFQ پەیوەندی