ژێرپۆلەکان

📁 Analog Switches 1 بەرهەمەکان 📁 Audio Codecs 59 بەرهەمەکان 📁 Bus Repeaters, Buffers & Extenders 2 بەرهەمەکان 📁 Communication ICs 1 بەرهەمەکان 📁 Digital Isolators 15 بەرهەمەکان 📁 Drivers, Receivers, Transceivers 5 بەرهەمەکان 📁 Ethernet ICs 1 بەرهەمەکان 📁 Ethernet PHYs 8 بەرهەمەکان 📁 Ethernet Transceivers 7 بەرهەمەکان 📁 I/O Expanders 3 بەرهەمەکان 📁 I2C 1 بەرهەمەکان 📁 Industrial Interfaces 1 بەرهەمەکان 📁 Interface Transceivers 5 بەرهەمەکان 📁 LIN Transceivers 28 بەرهەمەکان 📁 LVDS Drivers 1 بەرهەمەکان 📁 Logic Drivers 1 بەرهەمەکان 📁 Logic ICs 7 بەرهەمەکان 📁 Modems 1 بەرهەمەکان 📁 Network Interface 1 بەرهەمەکان 📁 PCI Express Switches 0 بەرهەمەکان 📁 RS-232/RS-422/RS-485 Interface 4 بەرهەمەکان 📁 RS-485 Transceivers 23 بەرهەمەکان 📁 RS-485/RS-422 22 بەرهەمەکان 📁 Sensor and Detector Interfaces 0 بەرهەمەکان 📁 SerDes 0 بەرهەمەکان 📁 Signal Buffers, Repeaters 2 بەرهەمەکان 📁 Signal Processing 0 بەرهەمەکان 📁 Specialized Interface 1 بەرهەمەکان 📁 Telephony Interfaces 2 بەرهەمەکان 📁 Touch Screen Controllers 1 بەرهەمەکان 📁 USB Connectors 4 بەرهەمەکان 📁 USB Controllers 1 بەرهەمەکان 📁 USB Hubs 1 بەرهەمەکان 📁 USB Interface ICs 37 بەرهەمەکان 📁 Video Codecs 0 بەرهەمەکان 📁 Video ICs 78 بەرهەمەکان

بەرهەمەکان (560+)

WAU8812YG - Mono Audio Codec + Speaker Driver | Nuvoton
WAU8812YG

WAU8812YG - Mono Audio Codec + Speaker Driver | Nuvoton

The Nuvoton WAU8812YG is a mono audio codec with integrated speaker driver, housed in a 32-pin QFN-EP (5x5 mm) package. It features one ADC and one DAC channel with typical signal-to-noise ratios of 91 dB (ADC) and 93 dB (DAC), and communicates over a serial audio data interface. An audio codec (coder-decoder) is an integrated circuit that converts analog audio signals to digital form via an ADC and converts digital audio back to analog via a DAC, while providing auxiliary functions such as microphone biasing, volume control, mixing, and in this case a built-in class speaker driver. Codecs sit between analog transducers (microphones, speakers) and digital processors such as MCUs or SoCs in the embedded audio signal chain, typically interfacing through an I2S-style serial port and a control bus for register configuration. The defining feature of the WAU8812YG is its integrated speaker driver: unlike a bare codec that requires an external amplifier stage, this device can drive a speaker directly, reducing BOM count, board area, and design effort in cost-sensitive voice applications. The 91/93 dB S/N ratio provides adequate fidelity for speech-band and compact audio playback. Architecturally, the part combines a sigma-delta-style conversion path with on-chip gain stages and mixing, configurable through serial control registers. The exposed-pad 32-QFN package improves thermal dissipation for the speaker driver stage and supports compact surface-mount layouts. Typical applications include doorbell and intercom voice units, IP phone and handset audio, smart-home voice terminals, alarm and announcement systems, and portable voice-recording devices where a single mono channel with direct speaker drive suffices. A key design consideration is thermal management: driving a speaker continuously at high output power increases die temperature, so PCB copper connected to the exposed pad should be sized according to the driver output level. Series ferrite beads on speaker lines reduce EMI radiated from switching drive currents. This page adds distributor-verified availability, alternatives context, application guidance, and design notes that go beyond the raw Nuvoton datasheet content.

RFQ پەیوەندی
WM8351CGEB/RV - Stereo Audio Codec | Cirrus Logic
WM8351CGEB/RV

WM8351CGEB/RV - Stereo Audio Codec | Cirrus Logic

The Cirrus Logic WM8351CGEB/RV is a stereo audio codec with integrated power management, supporting 48 kHz audio processing, 12-bit conversion, two ADCs, and two DACs. It is supplied in a 129-ball FBGA package measuring 7 mm by 7 mm. The device is intended for compact embedded systems where audio conversion, headphone or speaker amplification, and multiple regulated power rails are required in one package. An audio codec is an interface integrated circuit that converts digital audio data into an analog signal and converts analog audio back into digital data. The WM8351 belongs to the broader hierarchy of audio interface ICs, mixed-signal semiconductors, and embedded power-management devices. Integrating codec and power-management functions can reduce the number of separate components required around an application processor while centralizing analog routing and supply sequencing. The WM8351CGEB/RV supports sampling rates up to 48 kHz and uses sigma-delta conversion for its two ADC and two DAC channels. The manufacturer specification lists a typical signal-to-noise ratio of 95 dB for both the ADC and DAC paths. Its analog supply range is 2.5 V to 3.6 V, while its digital supply range is 1.71 V to 3.6 V, allowing digital-interface and analog-circuit rails to be adjusted independently within their specified limits. Integrated power management is a major architectural feature of this codec. It allows an embedded audio system to consolidate analog, digital, and amplifier-related supply functions under the control of one audio subsystem IC. The result can be a smaller board footprint and a more structured power-up sequence than a design using several unrelated regulators. Designers should still account for startup timing, supply ramp behavior, and load transients when planning the system power architecture. Typical uses include portable media players, smart-home audio endpoints, communication equipment, industrial control panels, and other embedded platforms requiring stereo playback and record capability. The 12-bit converters and 48 kHz maximum rate are appropriate for general-purpose voice and music pathways, although the manufacturer's datasheet should be consulted for application-specific signal quality, clocking, and filter requirements. Layout is critical because the WM8351CGEB/RV combines a 129-ball FBGA with sensitive analog and digital circuitry. Place decoupling capacitors close to the associated supply balls, keep analog and digital return paths separate until their planned grounding point, and follow the package-specific ball map for exposed-pad and thermal connections. This page combines package, conversion, supply, sourcing, and drop-in replacement information for faster engineering review.

RFQ پەیوەندی
WM8595GEFL/V - Audio Codec Transceiver | Cirrus Logic
WM8595GEFL/V

WM8595GEFL/V - Audio Codec Transceiver | Cirrus Logic

The Cirrus Logic WM8595GEFL/V is a mixed-signal audio codec transceiver packaged in a 48-pin QFN configuration. It belongs to the Wolfson audio-processing product line and is designed for equipment that converts between digital audio data and analog audio signals. Its 48-QFN package supports dense integration of audio conversion, digital interface, analog signal-path, and control functions on compact circuit boards. An audio codec is an interface IC that bridges digital audio systems and analog transducers such as microphones, headphones, speakers, and line-level equipment. The broader hierarchy is audio codec → audio interface IC → mixed-signal semiconductor → interface IC. This distinction matters because an audio transceiver can support signal conversion and device control while requiring careful treatment of analog grounding, clocking, power sequencing, and digital data routing. The WM8595GEFL/V is identified as an audio codec transceiver and is associated with the WM8595 family of Cirrus Logic, formerly Wolfson, audio devices. Its principal engineering benefit is integration: multiple audio functions can be consolidated into one compact mixed-signal IC instead of requiring separate converters, interface devices, and discrete control components. This can reduce board area and simplify firmware control of the audio subsystem. The 48-pin QFN package requires careful PCB layout because its exposed thermal pad must connect to a low-impedance ground plane for both electrical return-path performance and heat removal. Digital audio traces should remain separated from sensitive analog inputs where practical, while power, ground, and clock connections should follow the pin-description and layout guidance in the manufacturer datasheet. Typical applications include multifunction audio endpoints, consumer audiovisual equipment, communications systems, and embedded products requiring an integrated codec with analog audio connections. The same part number can appear in different orderable variants, so designers should preserve the exact WM8595GEFL/V suffix when checking package, temperature, and production configuration. Before layout begins, use the manufacturer pin-description table to assign every power, ground, analog, digital, and control connection. Validate the supported audio format, sample rate, clock topology, and analog external components against the product datasheet rather than inferring them from the generic codec category. This page combines the exact WM8595GEFL/V identity, package classification, sourcing context, application guidance, and drop-in replacement assessment to support faster component selection and PCB design. It also separates verified alternatives from options that would require a different footprint or functional redesign.

RFQ پەیوەندی
WM8731CSEFL/R - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8731CSEFL/R

WM8731CSEFL/R - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8731CSEFL/R is a 24-bit serial stereo audio codec with an integrated headphone driver, offered in a 28-QFN package measuring 5 mm by 5 mm. It supports a 2.7 V to 3.6 V analog supply range and combines two audio input channels, digital audio conversion, and headphone output in one surface-mount device. The family is designed for portable equipment and other systems requiring a compact host-controlled audio interface. A stereo audio codec is a mixed-signal interface IC that converts analog microphone or line-level signals into digital PCM audio and reconstructs digital audio into an analog headphone output. In the product hierarchy, the WM8731 belongs to the audio codec class, interface IC family, and power-management-adjacent signal-chain category. Its integrated headphone driver reduces the need for separate output amplification in portable audio products. The WM8731CSEFL/R provides 24-bit conversion resolution, a 24-bit serial interface, programmable sample-rate operation, and a 28-QFN 5 mm by 5 mm package. The 2.7 V minimum operating voltage suits low-voltage portable systems, while the 3.6 V maximum operating voltage defines the upper end of its specified analog supply range. Programmable sampling enables the host processor to select the digital audio rate required by its playback or recording path. This codec architecture places microphone or stereo line inputs, sigma-delta conversion stages, digital filtering, volume control, and headphone-drive functions into a single package. Digital control is performed through a serial interface, allowing a host processor to configure conversion, playback, and input parameters. The 28-QFN footprint is compact, but its exposed thermal and electrical requirements must be handled with careful PCB layout and stable supply bypassing. Typical uses include portable Internet audio devices, digital music players, portable recorders, communications equipment, and compact embedded audio systems. In a portable player, the codec can accept line or microphone inputs and drive stereo headphones while the host exchanges PCM audio over the serial bus. In a recording product, the same device can support stereo capture and headphone monitoring while avoiding a separate monitor-output converter. Place the device close to the analog audio connectors and keep digital return paths away from microphone and line inputs. Follow the manufacturer datasheet for decoupling, exposed-pad connection, analog grounding, and supported interface modes. Correct layout is particularly important because mixed-signal codecs combine high-gain analog inputs with fast serial control and clock signals on the same compact package. This product page consolidates the exact orderable MPN, package information, interface classification, supply limits, and verified replacement findings. It also provides application guidance, comparison fields, and design cautions that help engineers evaluate the codec before beginning schematic capture, PCB layout, or firmware integration.

RFQ پەیوەندی
WM8731SEDS/RV - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8731SEDS/RV

WM8731SEDS/RV - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8731SEDS/RV is a 24-bit serial stereo audio codec with an integrated headphone driver, supplied in a 28-pin SSOP package. The device operates from a 2.7 V to 3.6 V supply, supports an industrial temperature range of -40°C to +85°C, and is identified as a surface-mount RoHS-compliant component. An audio codec is an interface IC that converts digital audio data into an analog audio signal and converts analog audio into a digital stream. In the product hierarchy, the WM8731 belongs to audio codecs, interface ICs, and broader semiconductor signal-processing devices. Its integrated headphone-driver capability combines digital-to-analog and analog-to-digital conversion with headphone-output support in one package. The WM8731SEDS/RV is listed as a 24-bit serial audio interface in a 28-pin SSOP package. The 208 mil package designation is a mechanical body-width classification, while the 28-pin arrangement provides the physical interface for power, digital audio, analog audio, microphone, and headphone-related functions. The 2.7 V to 3.6 V operating range is appropriate for compact, low-voltage digital audio systems. Its 24-bit resolution is the principal data-format characteristic identified in the manufacturer listings. Digital audio systems use this resolution to represent each sample across a defined numerical range, while the serial interface transfers encoded audio between the codec and a host controller. Integrated headphone drive reduces the number of separate external output-path components when the supported output topology is appropriate for the design. Typical design roles include portable media players, digital audio consoles, headset interfaces, and embedded systems that require one IC to handle stereo playback and recording. The industrial -40°C to +85°C temperature range supports operation across industrial and commercial ambient conditions, although individual subsystem requirements must still be checked. Designers should use the pin-description table and reference application circuit in the Cirrus Logic manufacturer datasheet when assigning SSOP-28 routes, selecting bypass capacitors, and connecting analog and digital grounds. The 2.7 V minimum and 3.6 V maximum supply limits should be enforced across supply tolerance, startup, and load-transient conditions. This page organizes the exact WM8731SEDS/RV ordering code with package, environmental, sourcing, replacement, and application guidance. It also distinguishes the verified orderable variant from unavailable cross-brand equivalents, helping engineers make a footprint-compatible decision without confusing similar codec functions with true drop-in interchangeability.

RFQ پەیوەندی
WM8778SEDS/RV - 24-Bit 192kHz Stereo Audio Codec
WM8778SEDS/RV

WM8778SEDS/RV - 24-Bit 192kHz Stereo Audio Codec

Cirrus Logic WM8778SEDS/RV is a 24-bit, 192kHz stereo audio codec with one integrated ADC and one integrated DAC, packaged in a 28-pin SSOP measuring 5.30 mm wide. The device converts digital PCM audio into analog stereo output and accepts analog stereo input for conversion into digital PCM data. An audio codec is a mixed-signal interface IC that combines converter functions with the digital audio interface required by a host processor. The WM8778SEDS/RV belongs to the audio codec hierarchy: audio interface IC, mixed-signal semiconductor, and signal-processing component. This integration allows an audio subsystem to share one physical codec for playback capture, surround-sound processing, home audio equipment, and audiovisual systems. Its headline characteristics are 24-bit resolution, operation up to 192kHz, stereo conversion capability, and a 28-pin surface-mount SSOP package. The manufacturer describes the WM8778 as a high-performance stereo codec intended for surround-sound processing applications including home hi-fi, DVD-RW equipment, and other audiovisual products. The exact input and output signal interface details, clock architecture, and control requirements should be confirmed against the manufacturer datasheet before a PCB is released. Technically, the WM8778 combines an analog-to-digital conversion path with a digital-to-analog conversion path while operating as part of a broader digital audio signal chain. Its 192kHz capability supports high-resolution audio processing, while 24-bit conversion preserves substantially more amplitude detail than conventional consumer CD-era formats. Stereo integration reduces the number of separate converter packages required in a two-channel audio design. Typical applications include home theater and surround-sound processing, DVD-RW and other audiovisual equipment, hi-fi audio, and digital recording products. In these systems, the codec receives or produces PCM audio while an external processor handles decoding, mixing, volume management, and system-level routing. The codec should be paired with suitable clocking, analog filtering, power-supply decoupling, and output-buffer circuitry appropriate to the selected sample rate and channel configuration. A critical design step is preserving the integrity of the mixed-signal interfaces. Keep analog input and output routing away from high-speed digital clock and serial-data traces, use a continuous ground-plane reference, and decouple each supply rail close to its pins. Confirm the supported audio format, master-clock ratio, digital interface voltage, and analog biasing requirements in the manufacturer datasheet before finalizing component values. This product page combines the WM8778SEDS/RV conversion specifications, package details, application guidance, ordering information, and verified sourcing links. It also provides a practical comparison framework and identifies the absence of confirmed pin-compatible replacements without treating merely similar codecs as drop-in substitutes.

RFQ پەیوەندی
WM8804GEDS/RV - 1:1 S/PDIF Audio Transceiver | Cirrus Logic
WM8804GEDS/RV

WM8804GEDS/RV - 1:1 S/PDIF Audio Transceiver | Cirrus Logic

Cirrus Logic Inc. WM8804GEDS/RV is a consumer-mode S/PDIF digital audio transceiver supporting one received channel and one transmitted channel in a 20-lead Pb-free SSOP package. It combines digital-audio transmit and receive functions with PLL-based clock recovery and clock generation, making it suitable for systems that exchange digital audio over a Sony/Philips Digital Interface link. The device is listed as discontinued by the manufacturer. An S/PDIF transceiver is an interface IC that converts serial digital-audio data into electrical signals compatible with the consumer-mode S/PDIF standard, while also recovering data from an incoming S/PDIF stream. Within the broader semiconductor hierarchy, the WM8804 is an audio interface transceiver, a digital-audio interface IC, and a member of the broader interface semiconductor and audio processing categories. The principal features include support for one transmit channel and one receive channel, a crystal-derived or externally supplied main clock, low-jitter clock recovery, and internal generation of commonly used audio clocks. The combination of a digital interface and integrated PLL allows a compact design to interface an audio codec, DAC, or digital-audio processing device with an external S/PDIF port. Its 20-lead SSOP package also supports conventional surface-mount assembly. The WM8804 uses differential S/PDIF signaling for digital audio and relies on a stable reference clock for deterministic transmitter and receiver operation. Designers must account for clock quality, supported audio data formats, and the interface voltage levels when connecting the device. The exact supply voltage, supported sample-rate range, and principal electrical limits must be confirmed in the manufacturer datasheet before final circuit release. Typical uses include consumer digital-audio equipment, source and sink interfaces, clock-cleaning and distribution arrangements, and embedded audio systems requiring a bridge between S/PDIF and another digital-audio controller. The integrated transceiver is especially useful where a design needs both S/PDIF receive and transmit capability without using two separate interface devices. PCB implementation should preserve the pin assignments defined by the manufacturer datasheet and provide a continuous return path beneath the interface circuitry. Decoupling, grounding, clock routing, and output-impedance matching remain central to achieving reliable S/PDIF operation and low jitter. This product overview combines the device identity, package information, lifecycle status, functional architecture, practical application guidance, and verified sourcing records. It also distinguishes the WM8804 from components that only receive S/PDIF signals or that use a different package and pin configuration, helping engineers evaluate replacement risk before changing an existing PCB.

RFQ پەیوەندی
WM8805GEDS/V 8:1 Digital Audio Transceiver | Cirrus Logic
WM8805GEDS/V

WM8805GEDS/V 8:1 Digital Audio Transceiver | Cirrus Logic

Cirrus Logic WM8805GEDS/V is an 8:1 digital audio interface transceiver with a phase-locked loop, supporting eight received channels and one transmitted channel. Rated for operation up to 192 kSPS from a 2.7 V to 3.6 V supply, the device is packaged in a 28-pin SSOP measuring 5.30 mm wide. It is designed for consumer digital-audio systems requiring a compact interface between multichannel S/PDIF receivers and a digital audio transmitter. A digital audio interface transceiver is an interface IC that converts and routes digital audio signals between compatible serial interfaces while adding clock-recovery or synthesis functions. The WM8805GEDS/V belongs to the digital audio transceiver category, a subtype of audio interface IC and, more broadly, interface and signal-conditioning semiconductors. Its integrated PLL supports systems that need a stable digital timing reference for multichannel digital-audio reception or transmission. The principal verified features of the WM8805GEDS/V include eight receive channels, one transmit channel, a maximum sampling rate of 192 kSPS, and a 2.7 V to 3.6 V supply-voltage range. The single-transmitter, multichannel-receiver arrangement allows a product to accept several digital-audio sources while retaining an S/PDIF transmission path. Operating from 3.3 V makes the device suitable for low-voltage consumer audio equipment, provided the host circuitry observes the documented voltage and signal limits. The device is available in a 28-pin SSOP with a stated width of 5.30 mm. This surface-mount package is suitable for automated PCB assembly, although its lead pitch and thermal behavior require the dimensions and land pattern in the manufacturer datasheet. The verified operating-temperature range is -40 °C to +85 °C, supporting industrial-temperature consumer and embedded audio equipment when the surrounding system is designed for the same environmental range. Typical applications include multichannel S/PDIF receivers, digital audio recording equipment, home-theater and set-top-box audio paths, active speakers, and soundbar systems. The eight-channel receiver can simplify systems that need to monitor or route multiple digital-audio inputs, while the one-channel transmitter supports clocked output to another digital-audio device. Exact routing, channel allocation, and master-clock requirements must be established from the manufacturer datasheet. Designers should verify the digital-audio input amplitude, sampling-rate support, PLL configuration, and clock topology before laying out the PCB. The SSOP footprint should be checked against the official drawing rather than inferred solely from the 28-pin description. Decoupling and exposed interface behavior are not quantified in the supplied source data, so component selection and layout values require confirmation from the manufacturer documentation. This product record consolidates verified distributor specifications, pricing, package information, source links, and selection guidance. It also distinguishes verified functions from parameters that still require datasheet confirmation, helping engineers assess the WM8805GEDS/V without confusing similar digital-audio transceiver variants.

RFQ پەیوەندی
WM8850GEFL/V - 24-Bit HDA Audio Codec | Cirrus Logic
WM8850GEFL/V

WM8850GEFL/V - 24-Bit HDA Audio Codec | Cirrus Logic

The Cirrus Logic WM8850GEFL/V is a 24-bit high-definition audio codec with HDA and S/PDIF interfaces, packaged in a 48-QFN 7 x 7 mm package. It is designed for audio systems requiring digital audio conversion, digital interface support, and a multi-channel codec function in a compact surface-mount package. An audio codec is an interface IC that converts digital audio data between a digital audio bus and an analog or mixed-signal audio subsystem. In the product hierarchy, the WM8850GEFL/V is an audio codec within interface ICs and a member of the broader semiconductor category. HDA means high-definition audio, while S/PDIF is a digital consumer audio interface commonly used for inter-component digital audio links. These interfaces distinguish the WM8850GEFL/V from conventional low-power analog audio amplifiers. The manufacturer documentation identifies the device as a multi-channel high-definition audio codec. Its 24-bit audio format, HDA support, and S/PDIF support make it relevant to consumer electronics, portable media equipment, and embedded audio systems. The 48-QFN package offers a compact solution for board layouts where component density and short digital interconnect paths are important. The 7 x 7 mm body also requires careful thermal and electrical layout to preserve signal and power integrity. The WM8850GEFL/V combines a digital audio interface role with a multi-channel codec architecture. HDA connectivity allows the codec to participate in a host-oriented digital audio system, while S/PDIF provides a separate digital audio connection option. Because the device is primarily a codec, its implementation depends on correct clocking, digital interface configuration, power sequencing, analog routing, and host-driver or firmware support. Those system-level details must be confirmed in the manufacturer datasheet before schematic release. Typical uses include multi-channel digital audio equipment, high-definition audio playback and recording systems, portable consumer devices, and embedded multimedia products. A host processor can exchange digital audio through HDA, while S/PDIF can support an external digital audio link when required. The exact supported sample rates, codec functions, microphone paths, and physical signal assignments are defined by the manufacturer datasheet and should be checked against the intended system architecture. Layout should place decoupling capacitors close to the device power pins, route clocks and data signals over continuous reference planes, and keep sensitive analog and digital return paths separated where practical. The exposed thermal pad in a QFN package must be connected according to the datasheet land pattern and thermal guidance. Do not assume a generic QFN pad pattern because pad dimensions, via arrangement, and pin numbering must match the 48-QFN package drawing. This product record combines the exact manufacturer-facing part number, interface and package identifiers, distributor availability references, and the available substitute information in one engineering-focused view. It also distinguishes verified drop-in candidates from parts that are only functionally similar, helping design engineers avoid assuming that a shared audio function or similar package proves pin-level compatibility.

RFQ پەیوەندی
WM8904ECS/R - Ultra-Low-Power Stereo Codec | Cirrus Logic
WM8904ECS/R

WM8904ECS/R - Ultra-Low-Power Stereo Codec | Cirrus Logic

Cirrus Logic WM8904ECS/R is an ultra-low-power stereo audio codec optimized for portable audio applications and supplied in a compact 36-WCSP package measuring 2.65 mm by 2.53 mm. The device integrates stereo ground-referenced headphone amplifiers, ground-referenced line outputs, and a dual-mode charge-pump architecture intended to improve playback efficiency and reduce power consumption. Its output topology eliminates the need for conventional AC-coupling capacitors and includes common-mode feedback paths designed to reject ground noise. An audio codec belongs to the broader signal-chain hierarchy of audio interface ICs, mixed-signal converters, and portable audio semiconductors. Its primary role is to translate between digital audio data and analog headphone or line-level signals while providing the analog amplification and output biasing required by portable playback equipment. The WM8904 combines those functions to reduce the number of separate external audio components and simplify portable-device layouts. The WM8904's distinguishing features include stereo ground-referenced headphone amplification, a dual-mode charge-pump implementation, ground-referenced line outputs, common-mode feedback, and an ultra-low-power design focus. Ground-referenced outputs can simplify headphone-driver integration because their output bias is centered near the analog ground reference rather than requiring large output coupling capacitors. The dual-mode charge pump supports the internal headphone-output biasing and power-management functions while targeting efficient operation during playback. Common-mode feedback paths in the headphone and line-output stages are intended to reduce sensitivity to ground noise, which is important in compact systems where headphone wiring, microphone circuitry, switching converters, and digital logic can share a constrained board area. The 36-WCSP package also supports compact PCB layouts, although its 2.65 mm by 2.53 mm footprint requires careful assembly planning, exposed-pad inspection, and adequate acoustic or mechanical clearance for reliable production. Typical uses include portable music players, personal audio devices, smartphones, portable navigation equipment, compact Bluetooth speakers, and other battery-powered products that combine digital audio processing with analog headphone or line outputs. The device is also relevant to portable audio subsystems where low power, short signal paths, and reduced external component count are primary design priorities. When designing around the WM8904ECS/R, verify the complete electrical limits, supported digital audio interfaces, clock requirements, analog input configuration, and recommended decoupling directly in the manufacturer datasheet. Keep analog input and output routes away from noisy switching nodes, provide the required supply and reference components, and confirm that the exposed-pad layout and assembly process meet the package's thermal and solderability requirements. This page consolidates verified package, distributor, and manufacturer information with application-oriented engineering guidance rather than estimating unavailable electrical parameters.

RFQ پەیوەندی
WM8915ECSN/R - 24-Bit 48kHz Audio Codec | Cirrus Logic
WM8915ECSN/R

WM8915ECSN/R - 24-Bit 48kHz Audio Codec | Cirrus Logic

Cirrus Logic WM8915ECSN/R is a single-function CMOS audio codec with a 24-bit resolution and 48 kHz audio sampling rate in a 54-W-CSP package measuring 3.24 mm by 3.56 mm. The device supports I2S digital audio and is identified as a DAC/audio converter with integrated DSP functionality. An audio codec is a mixed-signal interface IC that converts digital audio data into an analog output and can also manage the corresponding audio signal path. Within the broader semiconductor hierarchy, the WM8915ECSN/R belongs to the audio codec family, integrates into interface ICs, and ultimately serves as a signal-processing and audio-conversion component within portable and embedded electronic systems. The 24-bit digital audio format provides a high-resolution representation of sound, while the 48 kHz sampling rate supports common consumer-audio rates used in voice, multimedia, and compact audio products. The I2S interface connects the codec to a digital audio processor through a serial data link, clock, and word-select signals. Its surface-mount CSP package supports compact board layouts where component height and area are important. The WM8915ECSN/R is categorized as a one-function CMOS codec with a 54-ball wafer-level CSP construction and a 0.4 mm pitch, according to its published product description. Its compact package places numerous connection points beneath or around the device body, so accurate land-pattern construction, assembly control, and pin assignment are essential. The manufacturer documentation should be consulted before creating a new footprint or routing a high-density audio board. Typical uses include portable audio equipment, multimedia players, voice-capable accessories, compact consumer systems, and embedded products requiring a compact I2S audio output. A system designer can pair the codec with a suitable host processor, speaker or headphone amplifier, microphone circuitry, and power-management components. The host must support a compatible 24-bit I2S stream and the required 48 kHz audio clock. The primary design consideration is package-level implementation. The 3.24 mm by 3.56 mm CSP requires a land pattern matching the manufacturer's ball layout, and exposed acoustic or thermal behavior should be evaluated in the final enclosure. Power, clock, and analog-output routing also need careful separation from switching circuitry to reduce interference in the audio path. This product record combines the verified package and audio-interface characteristics with application guidance, comparison parameters, and practical design notes. It helps engineers identify whether the WM8915ECSN/R fits a compact I2S audio design before beginning footprint and schematic work.

RFQ پەیوەندی
WM8944BECS/R - 24-Bit Mono Low-Power Codec | Cirrus Logic
WM8944BECS/R

WM8944BECS/R - 24-Bit Mono Low-Power Codec | Cirrus Logic

Cirrus Logic Inc. WM8944BECS/R is a highly integrated, low-power mono audio codec with video buffer, designed for portable devices including digital still cameras. The device supports a 24-bit audio resolution, I2C and SPI control interfaces, up to two analog inputs, and a stereo digital microphone interface. It is supplied in a 25-W-CSP surface-mount package measuring 2.41 mm by 2.41 mm. An audio codec is an integrated circuit that converts between digital audio data and analog microphone, line, headphone, or speaker signals. In the signal-chain hierarchy, the WM8944 combines a sigma-delta analog-to-digital converter, digital-to-digital conversion paths, analog bypass routing, output mixing, and an audio/video buffer within one low-power package. The manufacturer identifies the part as a mono low-power hi-fi codec with flexible single-ended and differential output configurations. Key features include one analog-to-digital converter and one digital-to-analog converter, sigma-delta conversion, 24-bit resolution, a stereo digital microphone interface, and support for up to two analog audio inputs. The listed signal-to-noise performance is 94 dB for the ADC path and 96 dB for the DAC path. Mono line output and mono bridge-tied-load headphone or speaker drive are also supported. The digital control interface supports both I2C and SPI, allowing the host processor to configure registers, mixer paths, input gains, and output routing. Flexible output mixing supports single-ended and differential configurations, with outputs derived from digital audio paths or analog bypass paths. This combination lets one codec serve microphone, line-input, and headphone or speaker-output stages without requiring a separate output amplifier in many portable designs. Typical applications include digital still cameras, portable media devices, compact audio capture systems, and camera modules that require microphone conversion alongside a video signal path. The video-buffer function allows the codec to support companion video routing while the device operates from a single integrated audio subsystem. Designers should follow the manufacturer pin-description table when assigning PCB tracks, particularly because the 25-W-CSP land pattern is compact and requires short, direct routing. Decoupling, analog input filtering, output-driver configuration, and BTL load connections must be implemented according to the device application guidance. This page consolidates the WM8944BECS/R interface, package, conversion, and application characteristics with engineering guidance on routing, supply decoupling, output configuration, and realistic substitute-part evaluation.

RFQ پەیوەندی
WM8946ECS/R - Stereo Low-Power Audio Codec | Cirrus Logic
WM8946ECS/R

WM8946ECS/R - Stereo Low-Power Audio Codec | Cirrus Logic

The Cirrus Logic WM8946ECS/R is a stereo low-power audio codec with two ADCs, two DACs, 24-bit resolution, 48 kSPS operation, and 98 dB SNR in a 36-ball W-CSP package measuring 2.97 mm by 3.07 mm. The device supports I2C and SPI control and includes a video buffer for systems that need to route video signals alongside processed audio. An audio codec is an interface IC that converts analog audio into digital PCM data and converts digital PCM or audio data back into analog signals. In the broader semiconductor hierarchy, the WM8946ECS/R belongs to the audio codec class, interface ICs, and integrated circuits. It integrates both conversion directions into one compact component, allowing a host processor to communicate digitally while speakers, microphones, headphones, or line-level circuits use analog signals. The WM8946ECS/R provides a 24-bit conversion interface, 48 kSPS sampling capability, and 98 dB signal-to-noise ratio. Its two ADC and two DAC channels support full stereo audio paths. I2C and SPI interfaces provide host-control options, while the integrated video buffer expands its applicability to portable devices and embedded systems that handle both audio and composite video. The low-power characterization is particularly relevant to battery-powered equipment. The WM8946ECS/R uses a 36-W-CSP package with dimensions of 2.97 mm by 3.07 mm. This very small package supports compact PCB layouts but requires careful component placement, short analog routing, and a stable power-supply implementation. Exact pin assignments, control-register details, voltage limits, clock requirements, and recommended application-circuit values are not present in the supplied verification snippets and must be confirmed in the manufacturer datasheet before schematic release. Typical applications include portable media players, personal audio devices, smartphone accessories, automotive infotainment systems, industrial human-machine interfaces, and compact embedded audio consoles. In each case, the codec can provide the stereo conversion interface between analog transducers and a digital host while I2C or SPI handles configuration and data control. The video-buffer feature may be useful in systems combining audio playback with video output requirements. Designers should verify the complete pin configuration, exposed-ball connections, analog input and output limits, digital interface voltage levels, clocking scheme, and decoupling requirements in the official WM8946 data. Because the package is only 2.97 mm by 3.07 mm, PCB assembly capability, solder-mask design, and component-placement tolerances should also be reviewed before committing to the footprint. This page consolidates the verified distributor, manufacturer-document, packaging, interface, and pricing references while identifying unavailable technical fields transparently. It also separates directly documented WM8946ECS/R attributes from design assumptions, helping engineers locate the official datasheet and assess whether the 36-ball low-power stereo codec fits a compact audio subsystem.

RFQ پەیوەندی
WM8947ECS/R Stereo Low-Power Audio Codec | Cirrus Logic
WM8947ECS/R

WM8947ECS/R Stereo Low-Power Audio Codec | Cirrus Logic

Cirrus Logic WM8947ECS/R is a stereo low-power audio codec IC supplied in a 25-ball WCSP package. The verified distributor information identifies the device as an interface and codec part, while the LCSC product listing states a price of $4.6743 as of 2026-10-29. A 25-WCSP package is designed for compact, high-density portable-device layouts where analog, digital, and power connections must be routed on a very small die area. The supplied search evidence does not expose the complete electrical specification set, so detailed signal-to-noise ratio, sampling-rate, voltage, channel, and amplifier ratings require confirmation in the manufacturer datasheet before design release. An audio codec is an interface IC that converts between digital audio data and analog microphone, line, or headphone signals. In the product hierarchy, a codec belongs to an audio interface IC, an interface IC, and ultimately the broader semiconductor category. This conversion function allows a host processor to play and capture audio while the codec handles the analog signal path, digital conversion, and associated filtering. The WM8947ECS/R is specifically identified by Mouser as a stereo low-power codec, making it relevant to portable and embedded multimedia equipment. The verified listings provide several procurement-level advantages: DigiKey classifies the WM8947ECS/R under codecs and interfaces, Mouser describes it as a stereo low-power codec, and LCSC lists the part as in stock. JLCPCB identifies the device as RoHS-compliant, while Wolfchip reported 23,560 pieces in stock on 2026-10-14. These facts support initial sourcing and compatibility work, but they do not replace verification of the electrical limits, exposed-ball assignments, thermal constraints, or supported digital audio interfaces. The part's principal engineering value is its combination of stereo codec functionality and a compact 25-WCSP implementation. WCSP construction can reduce board area compared with larger leaded or QFN packages, which is valuable in mobile and wearable products. That space advantage also makes correct PCB layout essential. Fine-pitch balls, a limited exposed-ball count, potential thermal-via requirements, and difficult visual inspection after assembly can complicate rework and signal-integrity implementation. Designers should obtain the official land-pattern and ball-listing information rather than infer connections from distributor pinout diagrams. Typical WM8947ECS/R applications include portable media players, smartphone accessories, compact audio accessories, wearable audio devices, and embedded multimedia systems. In each case, the codec would sit between a digital audio host and analog microphones, headphones, speakers, or line-level circuitry. Suitable companion components can include audio amplifiers, headphone drivers, microphones, and host-interface devices, but the exact companion choice depends on the power rails, grounding strategy, and acoustic architecture specified by the manufacturer. Before committing to a PCB revision, confirm the supported audio formats, master and slave clock arrangements, sample rates, microphone bias requirements, headphone and speaker outputs, digital and analog supply voltages, and permitted startup sequences in the official WM8947 datasheet. Also verify whether the WCSP has an exposed ground or thermal pad and which balls may be left unconnected. The supplied data does not establish a complete pinout, so no pin assignments are asserted on this page. This page consolidates verified distributor classification, current pricing, package information, stock observations, compliance evidence, and replacement-status findings for the WM8947ECS/R. It also distinguishes confirmed facts from parameters that remain unavailable in the supplied records, helping engineers make an initial sourcing decision without mistaking incomplete listings for a complete design specification.

RFQ پەیوەندی
WM8976CGEFL/V - 24-Bit Stereo Audio Codec | Cirrus Logic
WM8976CGEFL/V

WM8976CGEFL/V - 24-Bit Stereo Audio Codec | Cirrus Logic

Cirrus Logic WM8976CGEFL/V is a low-power stereo audio codec with a 24-bit I2S or PCM interface, a mono ADC, a stereo DAC, and an integrated speaker driver. The device is packaged in a 32-lead QFN measuring 5 x 5 mm and is positioned for portable audio equipment. Its combination of signal conversion and speaker amplification allows portable systems to use fewer external components while preserving a digital audio interface to a host processor. An audio codec is an interface IC that converts digital audio samples into analog signals and analog sound into digital data. Within the electronics hierarchy, the WM8976CGEFL/V belongs to the audio codec class of interface ICs and ultimately provides system-level audio signal conditioning. It can support microphone input, headphone or line-level output, and direct speaker drive in a compact portable design, subject to the power, bandwidth, and thermal limits stated in the manufacturer datasheet. The primary feature set includes a mono ADC, a stereo DAC, 24-bit digital audio operation, and support for both I2S and PCM data formats. The integrated speaker-driver function distinguishes the WM8976 from codec-only devices that require a separate analog amplifier. The 32-lead QFN package also provides a compact surface-mount footprint, while its exposed-pad construction helps transfer heat from the device into the PCB when the layout uses appropriate copper area. The WM8976 architecture is intended to bridge a digital audio source and analog transducers. Digital audio data enters through the serial interface, while the DAC produces left and right analog outputs. The ADC captures a mono analog input for recording or monitoring. Speaker signals are amplified inside the codec, reducing the number of external circuit blocks required in portable equipment. Exact sample-rate limits, channel separation, signal-to-noise performance, speaker output power, and supported input formats must be confirmed against the manufacturer datasheet before a design is released. Typical uses include portable media players, personal audio devices, portable speakers, smart audio accessories, and compact embedded systems with a digital audio host. In a portable player, the codec can accept serial audio from an application processor, provide analog outputs to a headset or line input, and drive a small speaker when its electrical limits suit the selected transducer. In a smart speaker or monitoring product, the mono ADC can support a microphone path while the stereo DAC feeds downstream amplification or line-level circuitry. PCB implementation requires attention to exposed-pad soldering, analog and digital grounding, and separation of sensitive audio paths from switching circuitry. Place input, output, bypass, and compensation components according to the manufacturer reference layout, and provide a low-impedance ground return around the exposed pad. The speaker load and supply voltage must remain within the device limits, and filtering should be selected to meet the intended audio bandwidth without introducing excessive distortion or instability. This product page combines the exact WM8976CGEFL/V ordering information, package identification, interface capabilities, sourcing guidance, and engineering-oriented integration notes. It also distinguishes the exact ordering code from packaging and sourcing variants so engineers can assess footprint, function, lifecycle, and replacement requirements before committing a design.

RFQ پەیوەندی
WM8994ECS/R - Ultra-Low-Power Hi-Fi Audio Codec | Cirrus Logic
WM8994ECS/R

WM8994ECS/R - Ultra-Low-Power Hi-Fi Audio Codec | Cirrus Logic

The Cirrus Logic WM8994ECS/R is an ultra-low-power, highly integrated Hi-Fi audio codec with a 24-bit I2S/PCM stereo audio interface in a 72-ball WCSP package measuring 4.52 mm by 4.03 mm. It supports smartphone and portable-device audio playback and recording, with integrated stereo Class D/AB speaker drive and Class W headphone drive to reduce the number of external audio amplifiers. An audio codec is a mixed-signal semiconductor that converts digital audio samples into analog signals and converts captured analog audio into digital data. The WM8994 belongs to the audio codec hierarchy within interface ICs, combining digital audio interfaces, analog converters, integrated amplifiers, clocking, and power-management functions. This consolidation reduces board area and power consumption in mobile multimedia systems. The verified product information identifies a 24-bit I2S/PCM interface, ultra-low-power operation, integrated stereo Class D and AB speaker drivers, and an integrated Class W headphone driver. The device requires two external supplies, Vbatt and 1.8 V, while integrated LDOs generate the other internal supply rails. This architecture is intended to lower external power-component count and simplify portable audio designs. Stereo full-duplex asynchronous sample-rate conversion and multi-channel audio support extend the codec beyond basic playback. Full-duplex conversion allows simultaneous playback and recording, including paths operating at different sample rates. The integrated speaker and headphone drivers move amplification closer to the codec, reducing dependence on discrete output stages in space-constrained consumer equipment. Typical uses include smartphones, tablets, portable media players, wearable devices, and other multimedia products. An application can route digital audio through the I2S/PCM interface while using the integrated Class W headphone driver for low-power headphone playback and the Class D/AB speaker path for higher-output speaker amplification. Designers should verify the complete pinout, absolute maximum ratings, clock requirements, exposed-ball layout, and decoupling recommendations from the manufacturer datasheet before layout. Because the supplied data does not include numeric converter performance, output power, sample-rate limits, or thermal data, those values must not be inferred from the product class. This page combines verified manufacturer and distributor information with structured specifications, application guidance, and replacement availability. It also distinguishes verified facts from parameters that require confirmation from the WM8994 datasheet, helping engineers make sourcing and design decisions without relying on unverified assumptions.

RFQ پەیوەندی
WM9705CSEFL/V - 18-Bit AC'97 Audio Codec | Cirrus Logic
WM9705CSEFL/V

WM9705CSEFL/V - 18-Bit AC'97 Audio Codec | Cirrus Logic

The Cirrus Logic WM9705CSEFL/V is an 18-bit multimedia audio codec with an AC'97 interface, two analog-to-digital converters, two digital-to-analog converters, and integrated touch-screen interface capability. It is packaged in a 48-QFN surface-mount package measuring 7 mm by 7 mm with an exposed pad. The converter architecture supports typical signal-to-noise ratios of 86 dB for the ADC paths and 91 dB for the DAC paths. An audio codec is an integrated circuit that converts between analog audio signals and a digital audio bus. In the signal chain, an ADC samples microphone or line input audio for digital transmission, while a DAC reconstructs digital audio into an analog output. AC'97 codecs combine these conversion functions with digital audio control and multimedia interface logic, placing the WM9705CSEFL/V within the broader codec, interface IC, and audio-processing semiconductor hierarchy. The WM9705CSEFL/V is differentiated by its 18-bit resolution, stereo converter organization, and AC'97 compatibility. Two ADC channels and two DAC channels allow simultaneous stereo capture and playback functions within one device. Its 48-QFN package supports compact surface-mount construction, while the exposed thermal pad assists heat transfer from the device to the PCB. The listed ADC and DAC signal-to-noise figures distinguish its usable audio performance from lower-resolution legacy codecs. Technically, the part combines analog input and output stages with a digital AC'97 audio interface. AC'97 is a legacy multimedia bus architecture used to carry audio data and control information between codecs and host audio controllers. Using a single codec for capture and playback reduces the number of separate analog audio devices required in a system, although correct clocking, bus timing, analog routing, and power sequencing remain essential to operation. Typical uses include industrial human-machine-interface panels, embedded touch-screen terminals, point-of-sale equipment, and legacy embedded systems that already use an AC'97 host controller. The integrated touch-screen interface is particularly relevant to compact human-machine interfaces where analog stereo audio and touch input share the same controller. Its 48-QFN footprint is also appropriate for multilayer PCB layouts with controlled impedance and a solid thermal-pad connection. Designers should verify the complete pin assignment, analog input and output configuration, AC'97 clocking requirements, and recommended external component values against the manufacturer datasheet before layout is released. The exposed pad requires a plated PCB thermal area and according-to-manufacturer solder and assembly guidance. Power, analog ground, digital ground, and signal-return connections should be planned to minimize converter noise coupling into the touch and audio paths. This product page organizes the confirmed codec attributes, package information, acquisition path, comparison points, and practical implementation considerations into a concise engineering reference. It also distinguishes verified device identity from order-code and lifecycle details that must be confirmed with the manufacturer before a new production design is released.

RFQ پەیوەندی