ژێرپۆلەکان

📁 Analog Switches 1 بەرهەمەکان 📁 Audio Codecs 59 بەرهەمەکان 📁 Bus Repeaters, Buffers & Extenders 2 بەرهەمەکان 📁 Communication ICs 1 بەرهەمەکان 📁 Digital Isolators 15 بەرهەمەکان 📁 Drivers, Receivers, Transceivers 5 بەرهەمەکان 📁 Ethernet ICs 1 بەرهەمەکان 📁 Ethernet PHYs 8 بەرهەمەکان 📁 Ethernet Transceivers 7 بەرهەمەکان 📁 I/O Expanders 3 بەرهەمەکان 📁 I2C 1 بەرهەمەکان 📁 Industrial Interfaces 1 بەرهەمەکان 📁 Interface Transceivers 5 بەرهەمەکان 📁 LIN Transceivers 28 بەرهەمەکان 📁 LVDS Drivers 1 بەرهەمەکان 📁 Logic Drivers 1 بەرهەمەکان 📁 Logic ICs 7 بەرهەمەکان 📁 Modems 1 بەرهەمەکان 📁 Network Interface 1 بەرهەمەکان 📁 PCI Express Switches 0 بەرهەمەکان 📁 RS-232/RS-422/RS-485 Interface 4 بەرهەمەکان 📁 RS-485 Transceivers 23 بەرهەمەکان 📁 RS-485/RS-422 22 بەرهەمەکان 📁 Sensor and Detector Interfaces 0 بەرهەمەکان 📁 SerDes 0 بەرهەمەکان 📁 Signal Buffers, Repeaters 2 بەرهەمەکان 📁 Signal Processing 0 بەرهەمەکان 📁 Specialized Interface 1 بەرهەمەکان 📁 Telephony Interfaces 2 بەرهەمەکان 📁 Touch Screen Controllers 1 بەرهەمەکان 📁 USB Connectors 4 بەرهەمەکان 📁 USB Controllers 1 بەرهەمەکان 📁 USB Hubs 1 بەرهەمەکان 📁 USB Interface ICs 37 بەرهەمەکان 📁 Video Codecs 0 بەرهەمەکان 📁 Video ICs 78 بەرهەمەکان

بەرهەمەکان (560+)

TUSB2036VF - 3-Port USB 2.0 Full-Speed Hub | Texas Instruments (Tape & Reel)
TUSB2036VF

TUSB2036VF - 3-Port USB 2.0 Full-Speed Hub | Texas Instruments (Tape & Reel)

The Texas Instruments TUSB2036VF is a 2/3-port USB 2.0 full-speed hub controller operating from a single 3.3V supply at 12 Mbps, housed in a 32-pin LQFP (7x7 mm) package with integrated USB transceivers. A USB hub controller is an interface IC that expands a single upstream USB port into multiple downstream ports, handling enumeration, power management, and port status reporting per the USB specification. Within the system hierarchy, it sits under USB interface ICs -> connectivity controllers -> semiconductors, and is a core building block in any product that must offer multiple USB device connections. Key features include compliance with the USB 2.0 specification at full-speed (12 Mbps), up to three programmable downstream ports, fully-compliant integrated transceivers on all upstream and downstream ports, and an optional serial EEPROM interface for storing vendor-specific configuration data such as VID/PID. Architecturally, the TUSB2036 is implemented as a 3.3V CMOS digital state machine (ASIC) rather than a microcontroller, which means no firmware development, programming, or flash memory is required - the device is fully functional as soldered. A dedicated DP0PUR pin (pull-up resistor disable) simplifies implementation of onboard bus-power/self-power dynamic-switching circuitry, reducing external BOM cost in bus-powered designs. Typical applications include standalone USB hubs, monitors and docking stations with USB ports, printers and multifunction peripherals, set-top boxes, and industrial equipment requiring multiple USB device ports from a single host connection. A key design consideration is power configuration: in bus-powered mode all downstream ports must draw within the USB budget of 500 mA total, whereas self-powered designs use the DP0PUR-based switching scheme and require proper VBUS sensing on downstream ports. The optional serial EEPROM allows custom VID/PID programming without firmware. This page synthesizes distributor pricing, drop-in alternatives such as the TUSB2046BVF, and practical design notes not found in the manufacturer datasheet, with all pricing referenced as of 2026-10-19.

RFQ پەیوەندی
TUSB2036VFR - 3-Port USB 2.0 Full-Speed Hub | Texas Instruments
TUSB2036VFR

TUSB2036VFR - 3-Port USB 2.0 Full-Speed Hub | Texas Instruments

The Texas Instruments TUSB2036VFR is a 2/3-port USB 2.0 full-speed hub controller operating from a single 3.3V supply at 12 Mbps, housed in a 32-pin LQFP (7x7 mm) package with integrated USB transceivers. A USB hub controller is an interface IC that expands a single upstream USB port into multiple downstream ports, handling enumeration, power management, and port status reporting per the USB specification. Within the system hierarchy, it sits under USB interface ICs -> connectivity controllers -> semiconductors, and is a core building block in any product that must offer multiple USB device connections. Key features include compliance with the USB 2.0 specification at full-speed (12 Mbps), up to three programmable downstream ports, fully-compliant integrated transceivers on all upstream and downstream ports, and an optional serial EEPROM interface for storing vendor-specific configuration data such as VID/PID. Architecturally, the TUSB2036 is implemented as a 3.3V CMOS digital state machine (ASIC) rather than a microcontroller, which means no firmware development, programming, or flash memory is required - the device is fully functional as soldered. A dedicated DP0PUR pin (pull-up resistor disable) simplifies implementation of onboard bus-power/self-power dynamic-switching circuitry, reducing external BOM cost in bus-powered designs. Typical applications include standalone USB hubs, monitors and docking stations with USB ports, printers and multifunction peripherals, set-top boxes, and industrial equipment requiring multiple USB device ports from a single host connection. A key design consideration is power configuration: in bus-powered mode all downstream ports must draw within the USB budget of 500 mA total, whereas self-powered designs use the DP0PUR-based switching scheme and require proper VBUS sensing on downstream ports. The optional serial EEPROM allows custom VID/PID programming without firmware. This page synthesizes distributor pricing, drop-in alternatives such as the TUSB2046BVF, and practical design notes not found in the manufacturer datasheet, with all pricing referenced as of 2026-10-19.

RFQ پەیوەندی
TUSB213RGYR - USB 2.0 HS Redriver with DC Boost | Texas Instruments
TUSB213RGYR

TUSB213RGYR - USB 2.0 HS Redriver with DC Boost | Texas Instruments

Texas Instruments TUSB213RGYR is a USB 2.0 high-speed signal conditioner with DC boost, optimized for restoring degraded USB data pairs across lossy interconnect. The device supports USB 2.0 high-speed, USB 2.0 OTG 2.0, and Battery Charging 1.2 operation, with one configurable high-speed data channel. Its 4.4 V to 5.5 V supply range and 14-pin VQFN package in a compact 3.5 mm by 3.5 mm footprint suit space-constrained USB ports, cable assemblies, docking systems, and embedded host or device designs. A USB redriver is a signal-processing interface integrated circuit placed between a USB transmitter and receiver. It detects degradation on a high-speed differential pair and applies selectable equalization to restore eye opening. Unlike a repeater or hub controller, the TUSB213 does not interpret USB packets or maintain device firmware; its primary role is analog signal recovery between the USB PHY and connector. The TUSB213 provides pin-strap or I2C configuration for low-speed, full-speed, and high-speed signaling. Four selectable AC boost settings allow the equalization to be tuned for different interconnect losses. Its disconnect and shutdown functions can reduce power consumption when a port is inactive. The device also supports daisy chaining to address high-loss channels, and interchangeable D1P/M and D2P/M routing helps simplify board planning. According to the Texas Instruments TUSB213 product page, the redriver is compatible with USB 2.0, OTG 2.0, and BC 1.2. It can support up to 5 meters of pre-channel cable length or 2 meters of post-channel cable length. These figures describe intended channel reach rather than a guarantee for every cable, connector, PCB, or environmental condition. Typical uses include USB Type-C and legacy USB-A ports, external storage, docking stations, cameras, test equipment, and industrial control panels. The DC-boost function can add a controlled DC component to a differential data signal, while selectable AC boost compensates high-frequency attenuation. Correct implementation requires preserving controlled-impedance routing between the source PHY, redriver, connector, and receiving PHY. Design the power rails so they remain within the 4.4 V to 5.5 V operating range, and place the redriver close to the connector when loss occurs mainly in cable or connector transitions. Configure boost through pins or I2C, evaluate eye closure with the intended channel, and verify low-speed and full-speed bypass behavior after high-speed equalization is enabled. This page combines the manufacturer feature set, packaging information, ordering variants, drop-in alternatives, application guidance, and design considerations into one engineering-focused reference. It also provides a parameter comparison to help assess whether a same-package variant is appropriate for a specific USB channel.

RFQ پەیوەندی
TUSB213RGYT - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB213RGYT

TUSB213RGYT - USB 2.0 HS Signal Conditioner | Texas Instruments

Texas Instruments TUSB213RGYT is a USB 2.0 high-speed signal conditioner with DC boost, supplied in a 14-pin VQFN package measuring 3.5 mm by 3.5 mm. It supports a 4.4 V to 5.5 V supply range and is designed to compensate for intersymbol interference and signal loss in USB transmission channels. The device includes four externally selectable AC boost settings and is intended to help systems pass USB electrical compliance tests. A USB high-speed signal conditioner is an interface IC placed between a USB controller and its connector or cable to restore degraded differential data signals. The TUSB213 belongs to the USB interface IC hierarchy, where USB signal conditioning helps preserve data integrity across lossy printed-circuit-board traces, connectors, cables, and externally powered devices. Its DC boost function complements AC equalization by restoring the differential voltage swing lost in a high-loss channel. Key features include compatibility with USB 2.0, USB OTG 2.0, and Battery Charging 1.2 operation. Configuration can be selected through pin straps or I2C, allowing implementation without a dedicated controller in simple systems. The device supports low-speed, full-speed, and high-speed signaling, offers very low USB disconnect and shutdown power consumption, and can be daisy-chained for high-loss channels. The D1P/M and D2P/M input paths are interchangeable, and the conditioner is host- and device-agnostic. These characteristics simplify board design when the same PCB may be used with different USB host or peripheral implementations. The TUSB213 can accommodate up to 5 m of pre-channel cable or 2 m of post-channel cable, according to the manufacturer product information. Typical uses include USB hubs, docking stations, cable extenders, peripheral controllers, external storage, industrial USB equipment, and test systems. It is especially useful when a PCB trace or connector creates measurable high-speed signal degradation and edge-rate distortion. The signal should be evaluated with an appropriate USB channel compliance setup before selecting the external AC boost setting. Place the conditioner close to the USB connector when connector loss dominates, while observing its recommended high-speed layout practices. Keep the D+ and D+ pairs routed as short and symmetric as possible, provide continuous reference planes, and avoid stubs or test pads that create unintended discontinuities. Configure the device through pin straps or I2C according to the manufacturer application guidance. This page combines the TUSB213 interface capabilities, package information, application guidance, and verified alternatives into an engineering-focused view. It also distinguishes device functionality from packaging-ordering variants so that PCB and sourcing decisions can be made against the correct electrical configuration.

RFQ پەیوەندی
TUSB215RGYT - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB215RGYT

TUSB215RGYT - USB 2.0 HS Signal Conditioner | Texas Instruments

Texas Instruments TUSB215RGYT is a USB 2.0 high-speed signal conditioner with DC boost, integrated USB BC1.2 Charging Downstream Port (CDP) functionality, and VBUS supply. The device supports USB 2.0, OTG 2.0, and BC1.2 operation, and it is designed for Low-Speed, Full-Speed, and High-Speed USB signaling. It provides a 480 Mbit/s USB high-speed interface capability in a 14-pin VQFN RGY package. A USB signal conditioner is an interface IC that restores signal integrity through lossy interconnect while adding the functions required by a USB port. The TUSB215 family is intended for systems where cable loss, connector transitions, PCB routing, or other channel impairments can degrade USB data signals. Its support for host or device use and interchangeable D+ and D− data paths makes it useful across common USB port architectures. The TUSB215RGYT includes DC boost, an integrated CDP, and a VBUS supply. Its USB BC1.2 CDP controller can be configured by pin strap or I²C, providing a practical way to identify a downstream-facing port and coordinate charging behavior. The device also supports daisy chaining, which can extend reach in high-loss applications. TI specifies support for up to 5 m of pre-channel cable or 2 m of post-channel cable. The device supports low-speed, full-speed, and high-speed signaling. Its dual data-path implementation permits D1P/M and D2P/M interchangeability, reducing sensitivity to which host or device lane is connected. This is particularly useful in reusable equipment, docking systems, and port designs where source and sink roles can change. Typical uses include USB 2.0 docking stations, laptop and tablet accessories, industrial data acquisition equipment, peripheral interfaces, and test systems. The integrated CDP and VBUS functions can simplify a compliant USB port design, while the signal-conditioning stage is intended to preserve data integrity over longer or less controlled interconnect. PCB implementation should preserve the high-speed differential pair as a controlled-impedance route and place decoupling close to the supply pins. Review the pin-description and layout guidance in the manufacturer datasheet before assigning tracks or selecting external components. Verify that the selected cable length and channel placement comply with the device’s stated pre-channel and post-channel limits.

RFQ پەیوەندی
TUSB216RWBR - 3-Channel 480 Mbps USB Signal Conditioner | TI
TUSB216RWBR

TUSB216RWBR - 3-Channel 480 Mbps USB Signal Conditioner | TI

Texas Instruments TUSB216RWBR is a 3-channel USB 2.0 high-speed signal conditioner rated for 480 Mbps operation and supplied in a 12-pin X2QFN package measuring 1.6 mm by 1.6 mm. The device includes USB Battery Charging Specification controller functions and is positioned for compact systems whose USB channels experience insertion loss or capacitive loading. A USB high-speed signal conditioner is an interface IC placed between a USB controller and a connector or cable to restore signal integrity. USB 2.0 high-speed data travels as differential pairs, and losses caused by capacitance, resistance, and intersymbol interference can degrade edge quality. The TUSB216 compensates high-speed channel loss while leaving USB low-speed and full-speed signal characteristics unaltered. This makes it part of the broader USB interface IC and signal-conditioning hierarchy. Three active channels allow the device to condition multiple USB data connections within compact equipment. The 480 Mbps operating class corresponds to USB 2.0 high speed, while the integrated DCP and CDP controller functions support downstream and charging-port behavior. Compatibility with USB On-The-Go and Battery Charging specifications broadens its use in portable-device, docking, and peripheral designs. The package keeps the footprint to 1.6 mm by 1.6 mm for space-constrained boards. The TUSB216 uses a patented signal-conditioning approach for USB high-speed channels. According to the manufacturer datasheet, it compensates intersymbol-interference signal loss in the transmission channel, including the effects of capacitive AC loss and resistive DC loss. The low-speed and full-speed paths remain unchanged, which helps the device preserve compatibility with the broader USB 2.0 specification while correcting the higher-speed data path. Typical applications include USB Type-C and legacy USB-A docking systems, portable electronics, charging docks, industrial peripherals, test equipment, and USB-to-USB repeaters. It is particularly useful when connector placement, cable length, protection components, or PCB routing create a lossy USB 2.0 channel. Its compact package also makes it suitable for multiport devices where three conditioned channels conserve board area. PCB implementation should preserve controlled-impedance routing through the conditioner and minimize stub branches between the USB controller, TUSB216RWBR, and connector. Bypass capacitors should be placed close to the supply pins, and the ground-return path should remain continuous. Designers should verify eye diagrams and compliance masks across the intended cable length, connector, and enclosure configuration rather than assuming compensation is universal. This page consolidates the device architecture, channel-rate information, package constraints, application guidance, and design considerations needed for USB 2.0 signal-integrity planning. It also distinguishes the TUSB216 family from related TI USB signal-conditioner parts and highlights the engineering checks required before treating any candidate as a board-level drop-in replacement.

RFQ پەیوەندی
TUSB216RWBT - 3-Channel 480Mbps USB 2.0 Redriver | Texas Instruments
TUSB216RWBT

TUSB216RWBT - 3-Channel 480Mbps USB 2.0 Redriver | Texas Instruments

The Texas Instruments TUSB216RWBT is a three-channel USB 2.0 high-speed signal conditioner and redriver that operates up to 480 Mbps in a 12-X2QFN package measuring 1.6 mm by 1.6 mm. Designed to compensate for intersymbol interference caused by channel loss, it includes AC-loss compensation, DC-loss compensation, and a configurable USB Battery Charging 1.2 controller. A USB signal conditioner is an interface IC placed between a USB host or device and a cable or connector when transmission losses threaten signal integrity. It belongs to the hierarchy of USB interface IC, redriver, repeater, signal-conditioning IC, and semiconductor. The TUSB216 improves a degraded high-speed channel while leaving low-speed and full-speed signal characteristics unaltered, allowing original USB behavior to be retained. The principal benefits are three-channel high-speed signal conditioning, support for USB 2.0 high-speed operation at 480 Mbps, USB On-The-Go compatibility, and integrated DCP and CDP controllers. The manufacturer states that the device can help a system pass USB 2.0 high-speed near-end eye compliance with a cable as long as 5 meters. The BC 1.2 controller can be enabled through a control pin, adding battery-charging negotiation to the same interface device. The third-generation signal-conditioning architecture addresses both AC loss caused by capacitive loading and DC loss caused by resistive loading. This makes the device relevant to cable, connector, PCB-trace, and adapter channels where attenuation or impedance discontinuities can reduce eye opening. Its small package also supports compact peripheral, docking, and embedded USB designs. Typical uses include USB 2.0 peripheral ports, long-cable connections, docking stations, charging-enabled USB ports, industrial equipment, and embedded systems that must extend USB high-speed reach without changing the host or device controller. Place the redriver close to the connector or source of channel loss, provide the required bypass capacitance, and route the two USB data pairs as controlled-impedance differential pairs. Confirm connector, cable, and PCB compliance in the final system because signal-conditioning operation cannot correct unrelated protocol, power, or routing defects. This page combines the device's USB interface characteristics, exact-package constraints, application guidance, and sourcing information. It also distinguishes verified engineering facts from parameters that require confirmation against the manufacturer datasheet before schematic release or production qualification.

RFQ پەیوەندی
TUSB2E22 - eUSB2 to USB 2.0 Dual Repeater | Texas Instruments
TUSB2E22

TUSB2E22 - eUSB2 to USB 2.0 Dual Repeater | Texas Instruments

The Texas Instruments TUSB2E22 is a USB-compliant eUSB2-to-USB 2.0 dual repeater (redriver) that bridges low-voltage eUSB2 interfaces on modern processors to standard USB 2.0 ports. It supports low-speed (LS), full-speed (FS), and high-speed (HS) signaling at up to 480 Mbps and is available in a 25-pin DSBGA (2x2 mm) package, with a 20-pin VQFN-FCRLF (3.5x3.5 mm) option in the family (TUSB2E22RZA). An eUSB2 repeater is a signal conditioning IC in the USB interface IC (redriver/repeater) family that converts between the 1.2 V single-ended eUSB2 signaling used by advanced low-voltage SoCs and standard 3.3 V-signaling USB 2.0 ports. It sits in the signal chain between the SoC eUSB2 PHY (eDSPr or eUSPr) and the external USB connector, regenerating signals to maintain USB 2.0 compliance. This device category is a critical enabler as process nodes shrink and I/O voltages fall below legacy USB levels. Key features include compliance to USB 2.0 and eUSB2 (rev 1.1), support for LS/FS/HS signaling, a dual repeater with a 2:2 crossbar mux, and host-and-device mode (DRD) support, allowing each repeater to be independently configured. Four eUSB2 compensation settings via the EQ0 and EQ1 pins let designers optimize output compensation for different channel-loss profiles, trace lengths, and connector losses. Architecturally, the TUSB2E22 retimes and re-drives USB signals, improving signal integrity over long traces and through connectors. The 2:2 crossbar mux supports flexible routing, including USB Type-C receptacle flipping where the D+/D- pair swaps between A6/A7 and B6/B7 positions. Power is supplied from VDD3V3 and VDD1V8 rails with no power-up sequence requirement between them; RESETB (active low) can also act as a power-down pin. Typical applications include USB Type-C ports on laptops and desktops, docking stations, USB hubs, and embedded systems whose SoCs expose only eUSB2. It is especially valuable where processor I/O voltage is too low for direct USB 2.0 signaling. Design consideration: configure EQ0/EQ1 per your PCB trace length and connector loss, decouple both supply rails well, and ensure VDD3V3/VDD1V8 ramp within 2 ms per the datasheet power-up recommendation. Prices as of 2026-08-30.

RFQ پەیوەندی
TUSB544RNQT - 8.1-Gbps 4-Channel USB-C Redriver | Texas Instruments
TUSB544RNQT

TUSB544RNQT - 8.1-Gbps 4-Channel USB-C Redriver | Texas Instruments

Texas Instruments TUSB544RNQT is a USB Type-C multi-protocol linear redriver with four channels, a maximum data rate of 8.1 Gbps, and a 40-pin WQFN (RNQ) package. It supports USB Type-C applications that include DisplayPort Alt Mode and other protocol-agnostic high-speed links, helping recover signal integrity after losses introduced by connectors, cables, and PCB traces. A linear redriver is a signal-conditioning semiconductor that receives a high-speed differential signal, applies selectable receive equalization, and resends the signal through an output driver. The TUSB544RNQT sits between a transmitter and a lossy interconnect rather than changing the underlying protocol or endpoint logic. Its protocol-agnostic architecture allows it to support multiple link types while operating from a single 3.3 V supply. The device provides four redriver channels, input equalization, output de-emphasis, a maximum data rate of 8.1 Gbps, and a stated propagation delay of 10.0 ns. These features make it useful for improving eye opening and reducing intersymbol interference on links affected by channel loss. The manufacturer classifies the device as an active, four-channel buffer and redriver intended for USB Type-C input and output signal paths. As a linear redriver, the TUSB544RNQT preserves the incoming data stream rather than converting it into another protocol. Its receive-side equalization compensates for low-frequency and high-frequency attenuation, while output de-emphasis can improve the transmitted signal shape. Signal-integrity tuning requires coordinated control of the host or peripheral source, cable and connector losses, trace geometry, and the redriver settings rather than treating equalization as a universal fix. Typical uses include USB-C docking systems, DisplayPort Alt Mode links, laptop and tablet accessories, high-speed external storage, and multi-protocol Type-C equipment. The four-channel arrangement can support a compact implementation that conditions multiple high-speed lanes, while the 6 mm by 4 mm WQFN package helps limit board area in space-constrained designs. Place the TUSB544RNQT close to the connector or the electrically weaker side of the link, and keep high-speed differential traces short and impedance controlled. Decoupling, return-path continuity, ESD protection, and thermal performance require careful PCB planning. Configuration resistors and test points should follow the manufacturer layout guidance because incorrect equalization or de-emphasis can reduce usable eye height. This product page combines the exact ordering information, 8.1-Gbps four-channel capability, 10.0 ns delay, 3.3 V operation, WQFN-40 physical details, application guidance, and verified sourcing links for engineers evaluating a USB Type-C redriver design.

RFQ پەیوەندی
TUSB8020B-Q1 - Automotive 2-Port USB 3.0 Hub 5Gbps | TI
TUSB8020B-Q1

TUSB8020B-Q1 - Automotive 2-Port USB 3.0 Hub 5Gbps | TI

The Texas Instruments TUSB8020B-Q1 is an automotive-grade two-port USB 3.0 compliant hub controller that provides simultaneous SuperSpeed (5.0 Gbps) and high-speed/full-speed connections on the upstream port, and SuperSpeed, high-speed, full-speed, or low-speed connections on the downstream ports. It is packaged in a 48-pin HTQFP (7x7 mm) and qualified for operation from -40C to +85C. A USB 3.0 hub is a protocol-aware repeater and transaction router defined by the Universal Serial Bus 3.0 specification. It sits in the hierarchy: hub controller -> USB interface IC -> interface IC -> semiconductor. Hubs enumerate as a device on the upstream bus and present one or more downstream ports, forwarding SuperSpeed packets with minimal latency while managing enumeration, power switching, and error handling for attached devices. Key features include USB 2.0 Multi Transaction Translator (MTT) architecture with two transaction translators and four asynchronous endpoint buffers per translator, support for USB Battery Charging Specification Revision 1.2 (BC 1.2) enabled per port via REG_6h(batEn[1:0]), and per-port or ganged power switching with over-current protection. Configuration is handled through SMBus, I2C, GPIO straps, or internal EEPROM/bootloader settings, giving designers flexible deployment options in embedded systems. The device integrates the SuperSpeed PHY and link-layer logic, supporting 5.0 Gbps differential signaling on both upstream and downstream lanes. AEC-Q100 automotive qualification makes it suitable for in-vehicle infotainment USB ports, telematics modules, and ADAS peripheral connectivity where temperature range and quality standards are mandatory. Typical applications include automotive head-unit and infotainment USB charging/connectivity ports, telematics gateways, industrial HMI panels with USB device access, and docking solutions requiring BC 1.2 charging detection. Design consideration: configure power-switch polarity and over-current inputs correctly (for example OVERCUR1z and PWRCTL_POL/SS_DN1 straps) when the mainboard does not supply VBUS to external devices, per TI E2E guidance.

RFQ پەیوەندی
TUSB8041-Q1 - 4-Port USB 3.0 Hub 5Gbps AEC-Q100 | Texas Instruments
TUSB8041-Q1

TUSB8041-Q1 - 4-Port USB 3.0 Hub 5Gbps AEC-Q100 | Texas Instruments

The Texas Instruments TUSB8041-Q1 is an automotive-grade, four-port SuperSpeed USB 3.0 hub controller delivering 5-Gbps data rates on the upstream port and supporting SuperSpeed, high-speed, full-speed, and low-speed connections on downstream ports. It is available in a 64-pin HTQFP (10x10 mm) package and operates over the AEC-Q1 qualified temperature range of -40C to +85C. A USB 3.0 hub controller is an interface IC that fans out a single upstream USB link into multiple downstream ports, negotiating both SuperSpeed (5 Gbps) and USB 2.0 (high/full/low-speed) paths simultaneously. Hubs sit in the USB topology hierarchy between the host controller and end devices, handling enumeration, power management, and transaction translation defined by the USB 3.0 specification. Key features include simultaneous SuperSpeed and high-speed/full-speed operation on the upstream port, per-port or ganged power switching with overcurrent protection support, operation as a USB 3.0 or USB 2.0 compound device, and flexible configuration via GPIO, I2C, or SMBus interfaces. The automotive qualification (AEC-Q100) makes it suitable for in-vehicle infotainment, telematics, and ADAS platforms where extended temperature and quality requirements apply. Architecturally, the TUSB8041-Q1 integrates the USB 3.0 hub repeater, SuperSpeed PHYs, and USB 2.0 transceivers in a single device, minimizing external component count. Configuration of VID/PID, port mapping, and power-switching behavior can be managed through SMBus or external EEPROM via the I2C interface, enabling customization without firmware development. Typical applications include automotive head units and infotainment hubs, telematics gateways, ADAS camera and sensor modules using USB connectivity, USB docking ports in industrial PCs, and developer carrier boards such as embedded SoM platforms. The four-port capability allows one upstream USB 3.0 connector to serve multiple peripherals. When designing, provide a stable 24 MHz reference clock or use the integrated oscillator option, and ensure per-port power switches are rated for the inrush requirements of attached USB 3.0 devices. At 5 Gbps, keep the SuperSpeed differential pairs length-matched with controlled impedance; according to TI datasheet guidance, unused downstream ports should be terminated per the datasheet recommendation for signal integrity.

RFQ پەیوەندی
TUSB8041IPAPQ1 - 4-Port USB 3.0 Hub AEC-Q100 | Texas Instruments
TUSB8041IPAPQ1

TUSB8041IPAPQ1 - 4-Port USB 3.0 Hub AEC-Q100 | Texas Instruments

The Texas Instruments TUSB8041IPAPQ1 is an automotive-grade four-port SuperSpeed USB 3.0 hub controller delivering 5-Gbps data rates on the upstream port and SuperSpeed, high-speed, full-speed, or low-speed connections on the four downstream ports, housed in a 64-pin HTQFP (PAP, 10x10 mm) package with exposed pad and qualified to AEC-Q100 for automotive applications. A USB hub controller is a dedicated interface IC that fans a single USB upstream connection out to multiple downstream ports while managing enumeration, power distribution, battery-charging handshakes, and protocol translation between USB 3.0 (SuperSpeed) and USB 2.0 (high/full/low speed) device populations. Hub controllers sit within the broader USB interface IC family inside the system I/O hierarchy of a compute module, head unit, or docking platform. Key features include simultaneous SuperSpeed and high-speed/full-speed operation on the upstream port, per-port USB 2.0/3.0 downstream connectivity, dual supply rails of 1.1V and 3.3V, and flexible configuration. Configuration is possible via pin straps, OTP ROM, an I2C EEPROM, or an I2C/SMBus slave interface for custom PID, VID, and port/PHY settings, with GPIO available for status and control. The device uses TI hub controller architecture that maintains 5-Gbps SuperSpeed signaling integrity while supporting battery charging strap options. Because the USB 3.0 link is handled natively, downstream traffic between mixed-speed devices is scheduled efficiently without bottlenecking SuperSpeed devices on a USB 2.0 path. Typical applications include automotive infotainment head units and telematics modules, industrial PCs and HMI panels, and docking stations or self-powered desktop hubs. The AEC-Q100 qualification makes it particularly suited to vehicle environments with wide temperature and load-dump conditions. Design consideration: supply sequencing and the 24-MHz reference clock layout dominate success with SuperSpeed hubs; keep crystal traces short and follow the TI reference design for the PAP package thermal pad grounding. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
TVP5146M2PFPR - 10-bit NTSC/PAL/SECAM Video Decoder | TI
TVP5146M2PFPR

TVP5146M2PFPR - 10-bit NTSC/PAL/SECAM Video Decoder | TI

The Texas Instruments TVP5146M2PFPR is a high-quality 10-bit single-chip digital video decoder that digitizes and decodes NTSC/PAL/SECAM composite and S-Video into digital component YCbCr, housed in an 80-pin HTQFP (PFP) package measuring 12x12 mm with an operating temperature range of 0 to 70 C. A digital video decoder is an analog front-end (AFE) IC that converts baseband analog video signals into digital component video suitable for processing by SoCs, DSPs, and FPGAs. Within the signal-chain hierarchy, it sits below video ADCs in abstraction: it integrates multiple high-speed ADCs (four 11-bit converters in this family), clock generation, synchronization separation, and color-space conversion on one die, making it a complete analog-video-to-digital-bridging solution for embedded video systems. Key features include 4x10-bit digital video output, A/D conversion of component RGB and YPbPr signals, an integrated 5-line adaptive comb filter that suppresses cross-luminance and cross-color artifacts in composite decoding, and Macrovision detection for copy-protection compliance. SCART support enables European consumer platform designs, and automatic standard detection of NTSC, PAL, and SECAM simplifies software bring-up. Architecturally, the TVP5146M2 digitizes the selected analog input through its embedded 11-bit ADC stage, applies analog clamping and gain control, then performs digital multi-standard decoding with the 5-line comb filter. YCbCr output is delivered over a standard parallel digital video port that interfaces directly to common video processors and display controllers. Linear-phase horizontal and vertical scaling-free output timing keeps downstream pipeline design straightforward. Typical applications include CCTV and DVR front ends, LCD monitors and TVs, video capture cards, set-top boxes, and industrial machine-vision equipment that must accept legacy composite, S-Video, YPbPr, or RGB sources. Design consideration: place a low-jitter crystal or clock source per the manufacturer datasheet layout guidance and keep analog inputs routed over a solid ground plane, since decoder SNR depends strongly on input clock jitter and analog layout quality. This page synthesizes distributor pricing, drop-in alternatives, comparison data, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
TVP5151PBSR - NTSC/PAL/SECAM Video Decoder | TI | 32-TQFP
TVP5151PBSR

TVP5151PBSR - NTSC/PAL/SECAM Video Decoder | TI | 32-TQFP

The Texas Instruments TVP5151PBSR is an ultralow-power NTSC/PAL/SECAM video decoder that converts analog composite video signals into 8-bit ITU-R BT.656 digital video with embedded syncs, housed in a 32-pin TQFP (PBS) 5x5 mm package operating from 0C to +70C. A video decoder is a mixed-signal interface IC that sits at the front end of a video capture system, digitizing analog composite (CVBS) or S-Video signals so that a host processor, DSP, or video encoder can process them. Within the signal-chain hierarchy, it belongs to the video decoder family of interface ICs, bridging the analog broadcast world and the digital video processing domain. Key features include programmable output formats - 8-bit 4:2:2 with embedded syncs (ITU-R BT.656) or 8-bit 4:2:2 with discrete syncs - Macrovision copy protection detection, and complementary four-line adaptive comb filtering for both luminance and chrominance paths to reduce cross-luminance and cross-chrominance artifacts. A chrominance trap filter is also available as an alternative to comb filtering. The optimized architecture achieves ultralow power consumption, making the device especially suitable for battery-powered systems. A Genlock/real-time control (RTC) output is generated for synchronizing downstream video encoders, which simplifies the design of capture-and-display pipelines. Analog supply operates from 1.65V to 1.95V, and an I2C serial interface programs all decoder functions including input selection, contrast, brightness, saturation, and hue. Typical applications include cell phones and PDAs with video-in capability, portable media players and recorders, security/surveillance capture front ends, and set-top-box analog input ports. The 5x5 mm TQFP footprint suits space-constrained portable designs. Design consideration: the ultralow-power supply rails are tight (1.65V-1.95V analog core); plan a clean 1.8V LDO rail and follow the datasheet decoupling recommendations to preserve decoder signal-to-noise performance on the analog inputs. This page synthesizes distributor pricing, drop-in alternative data, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
TXB0104QRUTRQ1 - 4-Bit Auto-Direction Level Translator | TI
TXB0104QRUTRQ1

TXB0104QRUTRQ1 - 4-Bit Auto-Direction Level Translator | TI

The Texas Instruments TXB0104QRUTRQ1 is an automotive-qualified 4-bit bidirectional voltage-level translator with automatic direction sensing, delivered in a compact 12-pin UQFN (RUT) package measuring 1.7 mm x 2.0 mm. It translates between a 1.2 V to 3.6 V A-port supply and a 1.65 V to 5.5 V B-port supply (VCCA <= VCCB), supporting data rates up to 100 Mbps. A voltage-level translator is a logic device that interfaces digital circuits operating at different supply voltages on the same PCB, such as a 1.8 V microcontroller talking to a 3.3 V or 5 V peripheral. translators sit within the broader logic IC hierarchy as members of the voltage-translation and signal-conditioning family used in mixed-voltage embedded systems. Key features include AEC-Q100 Grade 1 qualification (-40C to +125C ambient), +/-15kV IEC ESD protection on the I/O pins, and automatic direction sensing that eliminates direction-control pins or firmware overhead. The TXB family push-pull architecture uses internal one-shot edge accelerators, giving rise and fall symmetry suited to push-pull CMOS outputs. The 12-UQFN package enables very dense layouts in space-constrained automotive modules. Typical applications include automotive body electronics and lighting, infotainment and cluster SPI/I2C-adjacent push-pull signaling, sensor interface level shifting, and general-purpose MCU-to-peripheral level translation between 1.8 V, 2.5 V, 3.3 V, and 5 V domains. The wide 1.2 V low-side support makes it suitable for next-generation low-voltage processors. Design note: this device is intended for push-pull CMOS signals; for open-drain buses such as I2C, choose the TXS family instead. Do not add external pull-up or pull-down resistors on TXB I/O lines, as they can defeat the automatic direction sensing.

RFQ پەیوەندی
UJA1023T/2R04,512 - LIN 2.0 I/O Slave, 16-SO | NXP
UJA1023T-2R04512

UJA1023T/2R04,512 - LIN 2.0 I/O Slave, 16-SO | NXP

The NXP UJA1023T/2R04,512 is a stand-alone Local Interconnect Network (LIN) I/O slave that integrates a LIN 2.0/SAE J2602-compliant transceiver, a 30 kΩ slave termination resistor, an 8-bit SPI-configurable I/O expander, and high-side/low-side drivers in a 16-pin SOIC (SOT162-1) package. It targets electronic control units (ECUs) in body, comfort, and powertrain automotive sub-networks where a microcontroller needs to read switches and drive relays, lamps, or LED arrays without dedicating GPIO pins or a separate LIN transceiver. A LIN I/O slave (or LIN follower) is a node on a single-wire LIN bus that does not arbitrate the master role but answers polling frames from a LIN master ECU. The UJA1023 transparently sits between the LIN bus and the host MCU, decoding incoming LIN 2.0 frames and converting them into SPI read/writes; outgoing SPI commands drive the integrated high-side outputs and low-side outputs. Compared to discrete solutions (a standalone LIN transceiver plus a separate I/O expander plus discrete FET drivers), the UJA1023 reduces PCB area, BOM count, quiescent current, and software complexity for automotive ECUs that are LIN-attached slaves. Key features include LIN 2.0 and SAE J2602 compliance with LIN 1.3 backward compatibility, integrated 30 kΩ LIN termination, an SPI host interface with selectable SPI mode 0 or 3 up to 2 Mbit/s, configurable high-side and low-side output channels for relay and LED drive, cyclic and event-driven interrupt signalling, and a wide 6.5 V to 27 V battery supply range with 40 V load-dump survival. The 16-pin SOIC package is footprint-compatible with industry-standard 16-SOIC discrete LIN implementations and supports -40 °C to +125 °C automotive temperature grade. The UJA1023T/2R04,512 is widely used in automotive body and comfort ECUs such as seat-control modules, mirror adjusters, HVAC flap drivers, headlamp levellers, window-lift switch panels, and ambient lighting nodes. It is also used in roof modules, door modules, steering-column switch clusters, and LED daytime running light controllers where LIN-attached sub-modules offload switch scanning and actuator drive from the main MCU. When designing with the UJA1023T/2R04,512, ensure the local ECU power-rail decoupling follows NXP's reference design with a 100 nF ceramic plus a reverse-biased blocking diode on VBAT. Tie unused high-side and low-side output pins to GND through a 10 kΩ resistor or leave open per datasheet guidance, and verify SPI mode and clock polarity against the host MCU's configuration during bring-up.

RFQ پەیوەندی
UPD720211 - 2-Port USB 3.0 Hub Controller 5Gbps | Renesas
UPD720211

UPD720211 - 2-Port USB 3.0 Hub Controller 5Gbps | Renesas

The Renesas Electronics UPD720211 is a two-port USB 3.0 hub controller IC that complies with the Universal Serial Bus 3.0 Specification and operates at up to 5 Gbps SuperSpeed (SS) data rates, housed in a 56-pin quad flat no-lead (QFN) package rated from 0C to +70C. A USB 3.0 hub controller is an interface IC that aggregates and fans out USB connectivity, sitting within the broader hierarchy of USB interface ICs -> USB hub controllers -> USB peripherals -> communication and connectivity semiconductors. It manages enumeration, power distribution, and protocol translation between an upstream USB port and multiple downstream ports, enabling a single host controller to serve several devices simultaneously. Key features include full backward compatibility with all previous USB speeds - Low-Speed (LS, 1.5 Mbps), Full-Speed (FS, 12 Mbps), High-Speed (HS, 480 Mbps), and SuperSpeed (SS, 5 Gbps) - on each downstream port. The UPD720211 integrates an on-chip voltage step-down regulator equivalent to that of existing hub controllers, reducing external BOM count, and incorporates peripheral components required for rapid charging of tablets and smartphones. The QFN package is among the industry-leading small footprints for USB 3.0 hub controller chips, supporting compact motherboard layouts. Technically, the device leverages Renesas' market-proven USB 3.0 interface design expertise combined with a market-proven USB 2.0 hub core, and is compatible with Renesas' industry-standard host controllers. This heritage delivers mature firmware behavior and interoperability across a broad ecosystem of host platforms. Typical applications include desktop and laptop motherboards, docking stations, external multi-port USB hubs, industrial PCs, and set-top boxes requiring additional SuperSpeed ports with legacy-device support. A key design consideration is thermal and power budgeting: because the integrated step-down regulator supplies the hub core, PCB copper area under the QFN exposed pad should be maximized for heat dissipation, and the 0C to +70C operating range must be respected in enclosure designs. This page synthesizes distributor availability data, drop-in alternative analysis, and practical design notes not found in the manufacturer datasheet, adding unique value for sourcing and design engineers.

RFQ پەیوەندی
USB2514BI-AEZG - 4-Port USB 2.0 Hub Controller | Microchip (Tape & Reel)
USB2514BI-AEZG

USB2514BI-AEZG - 4-Port USB 2.0 Hub Controller | Microchip (Tape & Reel)

The Microchip Technology USB2514BI-AEZG is a 4-port USB 2.0 Hi-Speed hub controller with 480 Mbps throughput, a 3.3 V supply, and an integrated Multi Transaction Translator (MTT), housed in a 36-pin QFN (6x6 mm) package with exposed pad. It belongs to the Microchip USB251xB/xBi family of low-power, configurable hub controller ICs for embedded USB solutions. A USB hub controller is an interface IC that fans out a single upstream USB port into multiple downstream ports, handling enumeration, transaction translation between USB 2.0 Hi-Speed (480 Mbps) and Full-/Low-Speed (12/1.5 Mbps) devices, and power management for each port. Within the system hierarchy, it sits in the USB protocol layer between a host controller and the downstream peripherals, making it a critical building block in embedded USB solutions, docking stations, and instrumentation front ends. Key features include MultiTRAK technology, which assigns an independent transaction translator to every downstream port so mixed-speed devices do not block each other; I2C/SMBus and strapping-pin configuration options; industrial temperature support from -40C to +85C on the BI variant; and integrated battery-charging support on family members. Flexible OEM configuration via an external EEPROM or SMBus allows custom VID/PID, string descriptors, and port mapping without firmware development. Architecturally, the device leverages Microchip MultiTRAK technology for industry-leading data throughput in mixed-speed USB environments, and per Microchip documentation the family members are pin-compatible direct drop-in replacements for one another, using the same PCB components. The 36-QFN exposed-pad package supports good thermal and ground integrity for the 480 Mbps PHY. Typical applications include industrial USB ports on factory equipment and PLCs, medical instrument and test-equipment front panels, PC peripherals and docking hardware, and embedded host expansion in automotive-adjacent industrial systems that need robust USB connectivity. Design consideration: use the industrial-grade BI variant only if the full -40C to +85C range is required; the commercial B variant may reduce cost where 0C to 70C suffices, and both are pin-compatible drop-ins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
USB2514BI-AEZG-TR - 4-Port USB 2.0 Hub Controller | Microchip
USB2514BI-AEZG-TR

USB2514BI-AEZG-TR - 4-Port USB 2.0 Hub Controller | Microchip

The Microchip Technology USB2514BI-AEZG-TR is a 4-port USB 2.0 Hi-Speed hub controller with 480 Mbps throughput, a 3.3 V supply, and an integrated Multi Transaction Translator (MTT), housed in a 36-pin QFN (6x6 mm) package with exposed pad. It belongs to the Microchip USB251xB/xBi family of low-power, configurable hub controller ICs for embedded USB solutions. A USB hub controller is an interface IC that fans out a single upstream USB port into multiple downstream ports, handling enumeration, transaction translation between USB 2.0 Hi-Speed (480 Mbps) and Full-/Low-Speed (12/1.5 Mbps) devices, and power management for each port. Within the system hierarchy, it sits in the USB protocol layer between a host controller and the downstream peripherals, making it a critical building block in embedded USB solutions, docking stations, and instrumentation front ends. Key features include MultiTRAK technology, which assigns an independent transaction translator to every downstream port so mixed-speed devices do not block each other; I2C/SMBus and strapping-pin configuration options; industrial temperature support from -40C to +85C on the BI variant; and integrated battery-charging support on family members. Flexible OEM configuration via an external EEPROM or SMBus allows custom VID/PID, string descriptors, and port mapping without firmware development. Architecturally, the device leverages Microchip MultiTRAK technology for industry-leading data throughput in mixed-speed USB environments, and per Microchip documentation the family members are pin-compatible direct drop-in replacements for one another, using the same PCB components. The 36-QFN exposed-pad package supports good thermal and ground integrity for the 480 Mbps PHY. Typical applications include industrial USB ports on factory equipment and PLCs, medical instrument and test-equipment front panels, PC peripherals and docking hardware, and embedded host expansion in automotive-adjacent industrial systems that need robust USB connectivity. Design consideration: use the industrial-grade BI variant only if the full -40C to +85C range is required; the commercial B variant may reduce cost where 0C to 70C suffices, and both are pin-compatible drop-ins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
VSC7155XVU-02 - 18-PHY SAS Edge/Fanout Expander | Analog Devices
VSC7155XVU-02

VSC7155XVU-02 - 18-PHY SAS Edge/Fanout Expander | Analog Devices

Analog Devices VSC7155XVU-02 is an 18-PHY SAS Edge and Fanout Expander with table routing and an SSP engine, supporting 1.5 Gbps and 3.0 Gbps SAS operation in an integrated-circuit package. It expands a narrow SAS link into multiple physical lanes while providing centralized path routing for storage and data-processing systems. A SAS expander is a semiconductor interface controller that enables one host-side connection to fan out to multiple SAS devices or expander nodes. Such devices simplify backplane topology by replacing a large number of point-to-point host links with shared physical-layer resources. The VSC7155XVU-02 sits within this interface-expansion layer, between SAS initiators, expanders, and attached storage targets. The controller provides 18 physical PHYs, 1.5 Gbps and 3.0 Gbps data-rate capability, table-based routing, and an SSP engine. These features support scalable SAS edge and fanout architectures where link consolidation, device discovery, and controlled traffic distribution are important. The 18-PHY arrangement allows a single package to manage numerous SAS connections while reducing the number of separate interface controllers required by a system. SAS physical-layer expansion is particularly useful in storage systems that must balance density, cable reach, and failure isolation. Table routing organizes communication among attached nodes, while the SSP engine provides dedicated processing for Serial SCSI Protocol operations. In a well-balanced system, these functions allow initiator traffic to reach storage targets without requiring every target to connect directly to the host controller. Typical applications include SAS storage backplanes, edge expanders, fanout enclosures, data-center storage subsystems, and industrial systems using Serial ATA or SAS connectivity. The controller is also relevant to equipment requiring multiple serialized storage links, provided that the system-level cable, connector, power, and signal-integrity requirements are designed around the supported SAS data rates. For implementation, preserve controlled-impedance routing for high-speed SAS links and minimize discontinuities between the controller, connector, and cable path. Follow the manufacturer's reference design for layer transitions, reference-plane construction, via geometry, and decoupling. Confirm the exact exposed-pad, lead, and thermal requirements against the package drawing before layout release. This product overview combines the documented 18-PHY, 1.5 Gbps, 3.0 Gbps, table-routing, and SSP-engine characteristics with practical guidance for package identification, board layout, thermal management, and drop-in replacement assessment.

RFQ پەیوەندی
VSC7227YKV - 12-Channel 14.5 Gbps Retimer | Microchip Technology
VSC7227YKV

VSC7227YKV - 12-Channel 14.5 Gbps Retimer | Microchip Technology

The Microchip Technology VSC7227YKV is a 12-channel multirate 14.5 Gbps adaptive channel extender and retimer packaged in a 144-FCBGA (13 x 13 mm). It combines clock and data recovery with adaptive receive equalization in a single high-speed interface IC, making it suitable for extending or retiming impaired channels across demanding backplane, optical-module, and telecommunications equipment. A retimer is a high-speed interface IC that receives a serial signal, recovers the transmitted clock and data, applies configurable signal conditioning, and retransmits a cleaner signal at the specified line rate. In the device hierarchy, the VSC7227YKV is a specialized telecom interface IC, functionally related to clock and data recovery ICs, equalizers, channel extenders, and SerDes retimers. Unlike a passive redriver, a retimer can regenerate the data and clock rather than merely amplifying the waveform. The verified product information identifies the device as a multirate 14.5 Gbps, 12-channel interface. The accompanying -01 ordering variant is specifically described as supporting clock and data recovery and adaptive receive equalization. These functions address signal degradation caused by connector and PCB losses, making the device relevant to links whose channel margin is insufficient for reliable endpoint-only equalization. The VSC7227YKV operates in the high-speed telecommunications signal-integrity domain, where bit errors, jitter, insertion loss, and impedance discontinuities determine whether a link can close at the intended rate. Its 144-FCBGA package provides 144 electrical contacts for a dense, multichannel implementation, although the verified source data does not publish the complete pin assignments, power rails, or individual lane configuration details. Typical applications include telecommunications backplanes, optical module host interfaces, high-speed line cards, server-rack interconnect fabrics, and other multirate links that require receive-side clock recovery and adaptive equalization. Because it handles 12 channels in one package, it can simplify board partitioning compared with discrete single-channel retimer designs, provided the board stack-up and channel budget support the required signal integrity. Design evaluation must begin with the Microchip datasheet and application guidance for supported data rates, reference-clock requirements, power sequencing, and per-lane equalization. The verified search results do not expose lane-by-lane pinout, maximum supply voltage, operating temperature, or thermal-resistance data, so those values should not be inferred. Validate channel loss, jitter budget, BER targets, connector and via geometry, and thermal behavior before releasing a production board. This page separates verified product facts from unverified engineering parameters and combines the available pricing, channel-extender identification, and -01 family comparison with practical selection guidance. It also documents why a true drop-in replacement requires exact package and pin compatibility rather than merely a similar 14.5 Gbps retimer.

RFQ پەیوەندی
VSC8502XML - Dual-Port GbE Copper PHY QFN-135 | Microchip
VSC8502XML

VSC8502XML - Dual-Port GbE Copper PHY QFN-135 | Microchip

The Microchip Technology VSC8502XML is a dual-port 10/100/1000BASE-T Ethernet physical layer transceiver (PHY) with integrated line-side termination, housed in a 135-pin QFN (12x12 mm) package. It supports 1 Gbps data rates over copper with (G/RG)MII host interfaces. An Ethernet PHY (physical layer transceiver) is the IC that connects a media access controller (MAC) to the physical copper or fiber medium. Sitting at the bottom of the networking IC hierarchy - Ethernet controller, MAC, PHY, magnetics, jack - the PHY performs analog line drivers and receivers, clock and data recovery, auto-negotiation, and 10/100/1000BASE-T encoding. The VSC8502 belongs to the copper PHY category of Ethernet interface ICs used in switching, routing, and embedded connectivity designs. Key features include integrated line-side terminations, which eliminate up to 16 external precision resistors per port, conserve board space, reduce EMI, and improve system performance. Microchip further reduces bill-of-materials complexity and component count through integrated support circuitry. Dual integrated ports in one 12x12 mm package cut PHY count versus two single-port PHYs such as the KSZ9131, saving layout area and cost. Architecturally, the VSC8502 integrates two independent gigabit copper PHY cores sharing a common digital host interface supporting (G/RG)MII modes, enabling connection to 16-bit or 32-bit MACs, switch fabrics, or processors. Energy-efficient Ethernet and low-power modes reduce system power during idle link periods, an important consideration for multiport industrial and enterprise equipment. Typical applications include space-constrained 10/100/1000BASE-T designs: industrial Ethernet nodes and gateways, embedded switch and router line cards, IP surveillance cameras, networked test instruments, and server management (BMC) ports requiring dual copper links in a compact footprint. A key design consideration is preserving the PHY-to-magnetics routing: with line-side termination integrated, keep the board trace between the QFN package and the transformer short and impedance-controlled at 100 ohms differential, and follow Microchip layout guidance for ground referencing. This page adds value beyond the manufacturer datasheet by consolidating distributor availability, drop-in alternatives, application guidance, and practical design notes in one place for sourcing and design engineers.

RFQ پەیوەندی
VSC8514XMK - Quad-Port Gigabit Ethernet PHY | Microchip
VSC8514XMK

VSC8514XMK - Quad-Port Gigabit Ethernet PHY | Microchip

The Microchip Technology VSC8514XMK is a quad-port Gigabit Ethernet (GE) PHY transceiver with four integrated copper Ethernet circuits, low-power energy-efficient operation (EEE), and a 138-pin QFN package measuring 12 mm x 12 mm with an exposed thermal pad. A Gigabit Ethernet PHY (physical layer transceiver) is the interface IC that connects a Media Access Controller (MAC) to the physical copper or fiber medium. It performs line coding, serial-deserialization, equalization, and auto-negotiation per the IEEE 802.3 Ethernet standards, sitting at the bottom of the network stack hierarchy: PHY transceiver -> Ethernet interface IC -> networking IC -> system-on-chip. In broadband gateways, enterprise switches, and carrier equipment, the PHY is the component that ultimately determines link robustness and power efficiency. Key features of the VSC8514 include quad-port integration, which halves board area and power versus four discrete single-port PHYs; energy-efficient Ethernet (EEE) support for idle-link power savings in broadband and data center designs; and flexible host-side interfaces including QGMII (Quad Gigabit Media Independent Interface) alongside JTAG and SerDes connectivity for system configuration and high-speed interconnect. Carrier-grade capabilities such as TDM backhaul support make it suitable for wireless base station backhaul and transport equipment. Architecturally, the VSC8514 integrates four independent 1000BASE-T/100BASE-TX/10BASE-T copper PHY cores with on-chip DSP-based equalization and echo cancellation, delivered from Microchip's (formerly Microsemi's) Telecom products division. Per-port link status monitoring and industrial temperature operation (-40C to +110C per distributor listings) support unmanaged aggregation equipment deployed in harsh environments. Suffix variants such as XMK-11 and XMK-14 define temperature grade and feature sets (for example, the -14 variant omits SyncE). Typical applications include energy-efficient broadband gateways, enterprise and data center switching platforms, carrier TDM backhaul equipment, wireless base station backhaul, and industrial network aggregation nodes where multi-port density and low standby power are priorities. A key design consideration is thermal management: four active GE PHY cores in a single 12x12 mm QFN demand a well-designed exposed-pad PCB land pattern with multiple thermal vias into a ground plane; also confirm the correct suffix for your temperature range and SyncE requirements before committing the layout. This page synthesizes distributor availability across multiple channels, same-family drop-in variant analysis, application guidance, and comparison tables not found on the manufacturer's own product page, giving engineers a complete single-source view for selection and BOM decisions.

RFQ پەیوەندی
W6300-Q - 10/100 IPv4/IPv6 Hardwired TCP/IP Ethernet | WIZnet
W6300-Q

W6300-Q - 10/100 IPv4/IPv6 Hardwired TCP/IP Ethernet | WIZnet

The WIZnet W6300-Q is a 10/100 Mbps hardwired TCP/IP offload Ethernet controller (TOE) with a Dual IPv4/IPv6 hardware protocol stack, Quad SPI and parallel system bus host interface, available in lead-free 48-pin EPAD-LQFP and 48-pin QFN packages. An Ethernet controller chip is an integrated circuit that handles the physical (PHY) and data-link layers of Ethernet communication, offloading the host microcontroller from handling network protocols in software. The W6300 belongs to the broader hierarchy of Ethernet MAC/PHY controllers -> network interface ICs -> interface ICs -> semiconductors. WIZnet's hardwired (TOE) approach implements the TCP/IP stack in dedicated silicon logic rather than firmware, so the host MCU needs only simple register read/write operations over SPI or a parallel bus to send and receive network packets. Key features include the Dual IPv4/IPv6 hardware stack, which future-proofs designs for modern IPv6 networks without software TCP/IP libraries, and the high-speed Quad SPI host interface operating in Single, Dual, and Quad modes. Multiple hardware sockets are supported, letting several communication channels run concurrently in hardware. Low-power design features include Wake On LAN (WOL) and an Ethernet PHY Power Down Mode, allowing the chip to consume minimal power while remaining capable of waking the system on network activity. These make the W6300 suitable for battery-conscious and always-on connected products. Typical applications include industrial automation and factory networking equipment, IoT gateways that aggregate sensor traffic, and embedded networking nodes such as PLCs, remote I/O modules, and networked control systems that require deterministic, MCU-light Ethernet connectivity with IPv6 readiness. Design consideration: verify the host interface choice early. Quad SPI offers the highest throughput with fewest pins, while the parallel system bus suits MCUs with external memory interfaces. Pin muxing between the two interface modes must be confirmed against the manufacturer datasheet before layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-10-19.

RFQ پەیوەندی