MPX2010DP vs MPXC2012DT1 Comparison

Detailed side-by-side comparison of MPX2010DP by NXP Semiconductors and MPXC2012DT1 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

NXP Semiconductors
MPX2010DP MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP ✓ Active

Specification Comparison

Parameter MPX2010DP MPXC2012DT1
Brand NXP Semiconductors NXP Semiconductors
Category Pressure Sensors Pressure Sensors
Lifecycle Status Active NRND
Stock Status In Stock In Stock
Unit Price (USD) $8.50 $7.40
Sensor Type Differential Pressure Sensor —
Pressure Range 0 to 10 kPa (0 to 1.45 PSI) —
Technology Piezoresistive (silicon strain gauge bridge) —
Output Type Analog voltage, Wheatstone bridge (mV level) Wheatstone Bridge (analog mV)
Typical Full-Scale Span 25 mV at 10 V excitation —
Zero Pressure Offset 0 mV nominally (±1.0 mV max) —
Supply Voltage 10 V DC typical (max 16 V) —
Linearity ±0.05% (typ) [DATA_NEEDED: linearity %FS]
Temperature Compensation 0 °C to +85 °C (on-chip) —
Operating Temperature -40 °C to +125 °C [DATA_NEEDED: operating temperature range]
Response Time 1.0 ms (typical) —
Maximum Overpressure 75 kPa —
Burst Pressure 200 kPa —
Port Configuration Dual ports (differential), 0.19 inch / 4.93 mm tubes —
Package / Mounting 4-SIP Module (through-hole with axial tubes) —
Media Compatibility Dry air or non-corrosive gas —
RoHS Status Compliant [DATA_NEEDED: RoHS compliance status]
Pressure Type — Differential
Operating Pressure — 1.45 PSI (10 kPa)
Maximum Over Pressure — [DATA_NEEDED: maximum overpressure rating]
Full-Scale Output — 24 mV to 26 mV (typ. 25 mV) at 10 V excitation
Offset (Null) — 0 mV nominal at 10 V excitation
Excitation Voltage — 10 V DC typical
Bridge Resistance — [DATA_NEEDED: input/output bridge resistance]
Pressure Port Size — Female, 0.128 in (3.25 mm) side port
Port Style — Side port, single barbed inlet
Package / Case — 4-SSIP Module (chip-pak, no gel)
Termination Style — Through-hole PCB (vertical mount)
Gel Protection — No (bare die in chip-pak cavity)
Storage Temperature — [DATA_NEEDED: storage temperature range]
Mounting Type — Through-hole, vertical
MSL Level — Not applicable (through-hole sensor module)
Manufacturer — NXP Semiconductors (formerly Freescale / Motorola)

Datasheets & Resources

Browse All Products Create BOM Request Quote